Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “activation function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

The cosmological evolution and luminosity function of X-ray selected active galactic nuclei

The cosmological evolution and the X-ray luminosity function of X-ray selected active galactic nuclei (AGNs) are derived and discussed. The sample used consists of 31 AGNs extracted from a fully identified sample of X-ray sources from the Einstein Observatory Medium Sensitivity Survey and is therefore exclusively defined by its X-ray properties. The distribution in space is found to be strongly nonuniform. The amount of cosmological evolution required by the X-ray data is derived in the framework of pure luminosity evolution and is found to be smaller than the amount determined from optically selected samples. The X-ray luminosity function is derived. It can be satisfactorily represented by a single power law only over a limited range of absolute luminosities. Evidence that the luminosity function flattens at low luminosity or steepens at high luminosity, or both, is presented and discussed.

Maccacaro, T.↗

The tracking system analytic calibration activity for Mariner Mars 1971: Its function and scope

The functions of the Tracking System Analytic Calibration activity for Mariner Mars 1971 (MM'71), its objectives for this and future missions, and the support provided to the MM'71 Navigation Team during operations are described. Support functions encompass calibration of tracking data by estimating physical parameters whose uncertainties represent limitations to navigational accuracy, and detailed analysis of the tracking data to uncover and resolve any anomalies. Separate articles treat the activities and results of producing calibrations for the various error sources: Deep Space Station Locations, timing and polar motion, charged particles, and the troposphere. Two other articles are also included discussing the effects of the media error sources on orbit determination and the merits of the smoothing technique used for DRIVID.

Madrid, G. A.↗

A multifunctional technology platform for sorbent construction using polyacrylonitrile scaffolds

Polyacrylonitrile (PAN) is a synthetic polymer that shows high potential for use in a wide range of environmental remediation applications. PAN can be implemented in various ways within a batch or continuous process stream for use as a passive scaffold holding active gettering materials in place or where the PAN scaffold (e.g., beads, fiber mats, membranes) is functionalized with active chelating groups (e.g., amine, hydrazide, amidoximes, carboxyl). Application spaces covered in this review include remediation of heavy metals (e.g., Ag, As, Cd, Cr6+, Cu, Pb, Sb, and Se), high-dose fission products (e.g., 90Sr, 137Cs), radioiodine (i.e., 129I), noble gases (i.e., Xe, 85Kr), rare earths (e.g., Ce, Y), and actinides (e.g., Am, Pu, U). Methods for producing PAN composite sorbents are discussed. Options are also discussed for removing the PAN matrix following chemisorption of an active contaminant to minimize waste volumes requiring disposal.

polyacrylonitrile, composite sorbents, sulfides, a↗

Energy Efficient Transport - Technology in hand

Technologies developed through NASA's Energy Efficient Transport Program are described. The program was charged with research in advanced aerodynamics and active controls, with the goal of increasing the fuel efficiency of transport aircraft by 15 to 20 percent. Research in aerodynamics was directed toward the development of high-aspect-ratio supercritical wings, winglets, computational design methodology, high-lift devices, propulsion airframe integration, and surface coatings. The active control portion of the program investigated Wing Load Alleviation (WLA) through the use of active controls, drag reduction, and the effect of active pitch controls on fuel consumption. It was found that applying active control functions at the beginning of the aircraft design cycle brings the best benefit, and that if active control and advanced aerodynamic airframe configurations are applied to transport aircraft design concurrently with new lightweight materials, fuel consumption can be reduced by as much as 40 percent.

Middleton, D. B.↗

Functional Biomimetic Polymers with Antimicrobial Activity

At PNNL, we have developed a completely new class of synthetic biomimetic sequence-defined polymers based on triazine chemistry, which we call TZPs. PNNL's new polymers offer the opportunity to achieve similar functions to natural macromolecules; specifically we designed and synthesized a diversity of test molecules for antimicrobial activity. Antimicrobial activity against a variety of wild type and drug resistant pathogens was found.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Inhibition of Extracellular Enzyme Activity by Reactive Oxygen Species upon Oxygenation of Reduced Iron-Bearing Minerals

The dual roles of minerals in inhibiting and prolonging extracellular enzyme activity in soils and sediments are governed by enzyme adsorption to mineral surface. Oxigenation of mineral-bound Fe(II) generates reactive oxygen species (ROS), yet it is unknown whether and how this process alters the activity and functional lifespan of extracellular enzymes. Here, the effect of mineral-bound Fe(II) oxidation on the hydrolytic activity of a cellulose-degrading enzyme ß-glucosidase (BG) was studied using two pre-reduced Fe-bearing clay minerals (nontronite and montmorillonite) and one pre-reduced iron oxide (magnetite) at pH 5 and 7. Under anoxic condition, BG adsorption to mineral surface decreased its activity but prolonged its lifespan. Under oxic condition, ROS was produced, with the amount of •OH, the most abundant ROS, being positively correlated with the extent of structural Fe(II) oxidation in reduced minerals. •OH decreased BG activity and shortened its lifespan via conformational change and structural decomposition of BG. These results suggest that under oxic condition the ROS-induced inhibitory role of Fe(II)-bearing minerals outweighed their adsorption-induced protective role in controlling enzyme activity. These results disclose a previously unknown mechanism of extracellular enzyme inactivation, which have pivotal implications for predicting the active enzyme pool in redox-oscillating environments.

58 GEOSCIENCES↗

Process window estimation in manufacturing through Entropy-Sigma active learning

In manufacturing, there exist boundary identification problems for defining parameter spaces that meet desired thresholds on outcomes. This paper presents an Entropy-Sigma acquisition function for active learning of the process window/map in manufacturing using a Gaussian Process surrogate. Here, the method is applied to identify the stability boundary for the stability process map in machining using time-domain simulations with a periodic sampling stability metric. Results show that the proposed Entropy-Sigma method significantly outperforms Latin hypercube sampling or grid-based methods. The described method can be applied to identify the process window/map for any manufacturing application using a quantitative process outcome metric.

42 ENGINEERING↗

Efficient Third-Order Distributed Feedback Laser with Enhanced Beam Pattern

A third-order distributed feedback laser has an active medium disposed on a substrate as a linear array of segments having a series of periodically spaced interstices therebetween and a first conductive layer disposed on a surface of the active medium on each of the segments and along a strip from each of the segments to a conductive electrical contact pad for application of current along a path including the active medium. Upon application of a current through the active medium, the active medium functions as an optical waveguide, and there is established an alternating electric field, at a THz frequency, both in the active medium and emerging from the interstices. Spacing of adjacent segments is approximately half of a wavelength of the THz frequency in free space or an odd integral multiple thereof, so that the linear array has a coherence length greater than the length of the linear array.

Hu, Qing↗

Conformational Changes of RORγ During Response Element Recognition and Coregulator Engagement

The retinoic acid receptor-related orphan receptor γ (RORγ) is a ligand-dependent transcription factor of the nuclear receptor super family that underpins metabolic activity, immune function, and cancer progression. Despite being a valuable drug target in health and disease, our understanding of the ligand-dependent activities of RORγ is far from complete. Like most nuclear receptors, RORγ must recruit coregulatory protein to enact the RORγ target gene program. To date, a majority of structural studies have been focused exclusively on the RORγ ligand-binding domain and the ligand-dependent recruitment of small peptide segments of coregulators. Herein, we examine the ligand-dependent assembly of full length RORγ:coregulator complexes on cognate DNA response elements using structural proteomics and small angle x-ray scattering. The results from our studies suggest that RORγ becomes elongated upon DNA recognition, preventing long range interdomain crosstalk. We also determined that the DNA binding domain adopts a sequence-specific conformation, and that coregulatory protein may be able to ‘sense’ the ligand- and DNA-bound status of RORγ. We propose a model where ligand-dependent coregulator recruitment may be influenced by the sequence of the DNA to which RORγ is bound. Overall, the efforts described herein will illuminate important aspects of full length RORγ and monomeric orphan nuclear receptor target gene regulation through DNA-dependent conformational changes.

59 BASIC BIOLOGICAL SCIENCES↗

Si–Cl Bond Activations at Ni(0) to Give Bimetallic Ni(I) μ 1,2 -Cl–SiR 1 R 2 Complexes that Undergo Selective Hydrogenolyses to R 1 R 2 SiH 2 Dihydrosilanes

Chlorosilanes are cheap and abundant raw materials as crucial building blocks in silicon chemistry, yet the metal-mediated activation and functionalization of Si–Cl bonds typically require precious metal sources due to their thermodynamic inertness. Herein, we report the stoichiometric, facile activation, and hydrogenolysis of chlorosilanes mediated by a series of low-valent NHC–Ni (NHC = N-heterocyclic carbene) complexes. Treatment of a Ni(0) complex (IPr)Ni(η 6 -toluene) (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazole-2-ylidene) with chlorosilanes (R 1 R 2 SiCl 2 , R 1 = Cl, R 2 = Cl, Me, Ph, or R 1 = R 2 = Me, Et, Ph, 4-MePh) rapidly afforded di-Ni(I) complexes with a bridging silyl ligand ([(IPr)Ni] 2 (μ-SiR 1 R 2 Cl)(μ-Cl), 1 R1,R2 ) in high yields. Use of a bulkier chlorosilane, Ph 2 SiCl 2 , allowed the isolation of the mono-Ni(II) silyl complex (IPr)Ni(SiPh 2 Cl)Cl (2 Ph ) as an intermediate generated via Si–Cl oxidative addition, which underwent comproportionation with (IPr)Ni(η 6 -toluene) to form 1 Ph,Ph in nearly quantitative yield. Interestingly, 1 R1,R2 was found to react with H 2 at room temperature to form mono- or di-hydrosilanes in moderate to high yields, and the product selectivity was found to be highly dependent on the identity of substituents on Si. In conclusion, these results demonstrate a novel example of facile Si–Cl activation and hydrogenolysis mediated by low-valent mono- and dinuclear NHC–Ni complexes under mild conditions.

Liu, Tianchang [University of California, Berkeley↗

A study for active control research and validation using the Total In-Flight Simulator (TIFS) aircraft

The results of a feasibility study and preliminary design for active control research and validation using the Total In-Flight Simulator (TIFS) aircraft are documented. Active control functions which can be demonstrated on the TIFS aircraft and the cost of preparing, equipping, and operating the TIFS aircraft for active control technology development are determined. It is shown that the TIFS aircraft is as a suitable test bed for inflight research and validation of many ACT concepts.

Chen, R. T. N.↗

Epitope topography of agonist antibodies to the checkpoint inhibitory receptor BTLA

B and T lymphocyte attenuator (BTLA) is an attractive target for a new class of therapeutics that attempt to rebalance the immune system by agonizing checkpoint inhibitory receptors (CIRs). Herpesvirus entry mediator (HVEM) binds BTLA in both trans- and cis-orientations. We report here the development and structural characterization of three humanized BTLA agonist antibodies, 22B3, 25F7, and 23C8. We determined the crystal structures of the antibody-BTLA complexes, showing that these antibodies bind distinct and non-overlapping epitopes of BTLA. While all three antibodies activate BTLA, 22B3 mimics HVEM binding to BTLA and shows the strongest agonistic activity in functional cell assays and in an imiquimod-induced mouse model of psoriasis. 22B3 is also capable of modulating HVEM signaling through the BTLA-HVEM cis-interaction. The data obtained from crystal structures, biochemical assays, and functional studies provide a mechanistic model of HVEM and BTLA organization on the cell surface and informed the discovery of a highly active BTLA agonist.

59 BASIC BIOLOGICAL SCIENCES↗

PhenoProfiling: Mapping phenotypic outcomes to molecular determinants of biochemical activity

The aggregate genomes of the trillions of microorganisms within soil, animal hosts, and aquatic systems encode for an extensive functional capacity for myriad biochemical activities. C, N, P, and S metabolism, synthesis of signaling molecules and vitamins, mineralization, and other activities are essential to microbe, community, and plant physiology, and more broadly to climate, water, animal, flora, and human health. The current understanding of the molecular basis for the function of microbial communities stems primarily from comparative metagenomic and metatranscriptomic studies. These same tools are employed to ascertain the impacts to the community resulting from perturbations, such as climate change, emerging pollutants, fires, and seawater infiltration for environmental communities, and dietary changes, xenobiotic exposure, and various disease states for the human gut microbiome. Such studies can identify the potential for a specific function, but they cannot determine that a particular cell is functionally active, nor can they determine the molecular architecture required for function. In short, genes and transcripts alone fail to reveal the complex subcellular arrangement of proteins and molecules that elicit a given phenotype in a microbial cell.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Feasibility of a Novel Density Functional Method Outside the Kohn-Sham Framework for Modeling Global Potential Energy Surfaces of Molecular Chemical Reactions (Final Technical Report)

The project aimed towards the construction of computational methods capable of modeling the global potential energy surface (PES) of small molecules, molecular ions, and radicals — including the parts of the PES which correspond to chemical reactions, and the reaction paths connecting reactants, intermediates, and reaction products. This goal may seem humble at first glance, but for chemical systems with more than about six atoms in total, at the time the project was proposed, there were no established theoretical methods capable of simulating such systems reliably, not even for small molecules in the gas phase which are electronically benign. This restriction severely hampers our ability to model and control chemical processes under harsh conditions. With the goal of constructing a method capable of modeling such chemical systems, we proposed to pursue a novel approach towards a Multi-Configuration (MC) DFT outside the traditional frameworks of Kohn-Sham theory and other methods of coupling wave function theory with DFT. Rather than being a complete active space (CAS) method, the proposed DOCI-DFT would employ a special restricted form of the active space wave function, called Doubly-Occupied CI (DOCI)—this wave function form is sufficient to describe not only heterolytic, but also homolytic bond dissociation processes at the zeroth order (i.e., as active space wave function). There are no other standard mean field methods which can do so. In the original proposal, we also outlined strong formal and practical arguments speaking for this method. The project proposal was accepted by the Department of Energy and provided two years of seed funding for one graduate student, as well as two years of two weeks PI summer-salary for the PI. However, ultimately the project could not be effectively pursued due to severe interferences outside the context scientific problems and was cancelled. Apart from two weeks of PI salary (and associated fringe & overhead costs issues by the performing institution), no costs were charged against the award, with the entire rest of funding returned to the Department of Energy. This report reiterates the primary background information regarding the project, its original goals, and outlines the preliminary work performed during the two weeks of DOE funding charged.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physical interaction of the activator protein-1 factors c-Fos and c-Jun with Cbfa1 for collagenase-3 promoter activation

Previously, we determined that the activator protein-1 (AP-1)-binding site and the runt domain (RD)-binding site and their binding proteins, c-Fos.c-Jun and Cbfa, regulate the collagenase-3 promoter in parathyroid hormone-treated and differentiating osteoblasts. Here we show that Cbfa1 and c-Fos.c-Jun appear to cooperatively bind the RD- and AP-1-binding sites and form ternary structures in vitro. Both in vitro and in vivo co-immunoprecipitation and yeast two-hybrid studies further demonstrate interaction between Cbfa1 with c-Fos and c-Jun in the absence of phosphorylation and without binding to DNA. Additionally, only the runt domain of Cbfa1 was required for interaction with c-Jun and c-Fos. In mammalian cells, overexpression of Cbfa1 enhanced c-Jun activation of AP-1-binding site promoter activity, demonstrating functional interaction. Finally, insertion of base pairs that disrupted the helical phasing between the AP-1- and RD-binding sites also inhibited collagenase-3 promoter activation. Thus, we provide direct evidence that Cbfa1 and c-Fos.c-Jun physically interact and cooperatively bind the AP-1- and RD-binding sites in the collagenase-3 promoter. Moreover, the AP-1- and RD-binding sites appear to be organized in a specific required helical arrangement that facilitates transcription factor interaction and enables promoter activation.

Non-NASA Center↗

NASA metric transition plan

NASA science publications have used the metric system of measurement since 1970. Although NASA has maintained a metric use policy since 1979, practical constraints have restricted actual use of metric units. In 1988, an amendment to the Metric Conversion Act of 1975 required the Federal Government to adopt the metric system except where impractical. In response to Public Law 100-418 and Executive Order 12770, NASA revised its metric use policy and developed this Metric Transition Plan. NASA's goal is to use the metric system for program development and functional support activities to the greatest practical extent by the end of 1995. The introduction of the metric system into new flight programs will determine the pace of the metric transition. Transition of institutional capabilities and support functions will be phased to enable use of the metric system in flight program development and operations. Externally oriented elements of this plan will introduce and actively support use of the metric system in education, public information, and small business programs. The plan also establishes a procedure for evaluating and approving waivers and exceptions to the required use of the metric system for new programs. Coordination with other Federal agencies and departments (through the Interagency Council on Metric Policy) and industry (directly and through professional societies and interest groups) will identify sources of external support and minimize duplication of effort.

Source record↗