Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “absorption saturation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Effect of the variation rate of an external magnetic field on the high-frequency response of surface superconductivity in a critical state

The effect of the magnetic field variation rate on the high-frequency absorption of surface superconductivity of cylindrical samples has been studied. It has been shown that the magnitude of additional highfrequency absorption attributed to Kulik vortices does not demonstrate saturation and other critical changes up to a magnetic field variation rate of 350 kOe/s, which indicates that the velocity of motion of Kulik vortices is higher than that of Abrikosov vortices. The effect of the normal core of the sample on the dynamics of a magnetic flux has been discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ground-based Photon Path Measurements from Solar Absorption Spectra of the O2 A-band

High-resolution solar absorption spectra obtained from Table Mountain Facility (TMF, 34.38degN, 117.68degW, 2286 m elevation) have been analyzed in the region of the O2 A-band. The photon paths of direct sunlight in clear sky cases are retrieved from the O2 absorption lines and compared with ray-tracing calculations based on the solar zenith angle and surface pressure. At a given zenith angle, the ratios of retrieved to geometrically derived photon paths are highly precise (approx.0.2%), but they vary as the zenith angle changes. This is because current models of the spectral lineshape in this band do not properly account for the significant absorption that exists far from the centers of saturated lines. For example, use of a Voigt function with Lorentzian far wings results in an error in the retrieved photon path of as much as 5%, highly correlated with solar zenith angle. Adopting a super-Lorentz function reduces, but does not completely eliminate this problem. New lab measurements of the lineshape are required to make further progress.

Yang, Z.↗

Absorption of sound in air - High-frequency measurements

The absorption of sound in air at frequencies from 4 to 100 kHz in 1/12 octave intervals, for temperatures from 255.4 K (0 F) to 310.9 K (100 F) in 5.5 K (10 F) intervals, and at 10% relative-humidity increments between 0% and saturation has been measured. The values of free-field absorption have been analyzed to determine the relaxation frequency of oxygen for each of the 92 combinations of temperature and relative humidity studied and the results are compared to an empirical expression. The relaxation frequencies of oxygen have been analyzed to determine the microscopic energy-transfer rates.

Bass, H. E.↗

Detection of a CH4 atmosphere on Pluto

A ratio spectrum of Pluto shows methane absorption bands at 6200, 7200, 7900, 8400, 8600, 8900, and 10,000 A. The heavy saturation of the 8900 band as compared to the other bands indicates a gaseous origin for the observed absorptions. A total methane abundance of 80 + or - 20 m-am is derived, and an upper limit to the total pressure of approximately .05 atm is set. The methane atmosphere would be stable if the mass of Pluto is increased 50% over its present value and its radius is 1400 km. A heavier gas mixed with the methane atmosphere would also aid its stability.

Fink, U.↗

Carbonic anhydrase-facilitated CO2 absorption with polyacrylamide buffering bead capture

A novel CO2 separation concept is described wherein the enzyme carbonic anhydrase (CA) is used to increase the overall rate Of CO2 absorption after which hydrated CO2 reacts with regenerable amine-bearing polyacrylamide buffering beads (PABB). Following saturation of the material's immobilized tertiary amines, CA-bearing carrier water is separated and recycled to the absorption stage while CO2-loaded material is thermally regenerated. Process application of this concept would involve operation of two or more columns in parallel with thermal regeneration with low-pressure steam taking place after the capacity of a column of amine-bearing polymeric material was exceeded. PABB CO2- bearing capacity was evaluated by thermogravimetric analysis (TGA) for beads of three acrylamido buffering monomer ingredient concentrations: 0 mol/kg bead, 0.857 mol/kg bead, and 2 mol/kg bead. TGA results demonstrate that CO2- bearing capacity increases with increasing PABB buffering concentration and that up to 78% of the theoretical CO2- bearing capacity was realized in prepared PABB samples (0.857 mol/kg recipe). The highest observed CO2-bearing capacity of PABB was 1.37 mol of CO2 per kg dry bead. TGA was also used to assess the regenerability Of CO2-loaded PABB. Preliminary results suggest that CO2 is partially driven from PABB samples at temperatures as low as 55 degrees C, with complete regeneration occurring at 100 degrees C. Other physical characteristics of PABB are discussed. In addition, the effectiveness of bovine carbonic anhydrase for the catalysis Of CO2 dissolution is evaluated. Potential benefits and drawbacks of the proposed process are discussed. Published by Elsevier Ltd.

Dilmore, Robert↗

Mitigation of two-plasmon decay in direct-drive inertial confinement fusion through the manipulation of ion-acoustic and Langmuir wave damping

The extended Zakharov model of the two-plasmon decay instability in an inhomogeneous plasma [D. F. DuBois et al., Phys. Rev. Lett. 74, 3983 (1995); D. A. Russell and D. F. DuBois, Phys. Rev. Lett. 86, 428 (2001)] is further generalized to include the evolution of the electron distribution function in the quasi-linear approximation [cf., e.g., K. Y. Sanbonmatsu et al. Phys. Plasmas 7, 2824 (2000); D. A. Russell et al., paper presented at the Workshop on SRS/SBS Saturation, Wente Vineyards, Livermore, CA, 2–5 April 2002]. This makes it possible to investigate anomalous absorption of laser light and hot electron production due to the two-plasmon decay instability of multiple overlapping electromagnetic waves. Scalings of hot-electron production in the (stationary) nonlinearly saturated regime relevant to recent experiments [B. Yaakobi et al., Phys. Plasmas 19, 012704 (2012); D. H. Froula et al., Phys. Rev. Lett. 108, 165003 (2012)] have been obtained. They indicate a sensitivity to ion-acoustic wave (IAW) damping and to the collisional absorption of Langmuir waves. Such a sensitivity might be exploited in inertial confinement fusion target design by the use of mid-Z ablators.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of solar magnetic fields by Fourier transform techniques. II - Saturated and blended lines

Fourier techniques have been exhaustively calibrated using Unno's (1956) results for the absorption profile of a simple Zeeman triplet. If a simple transformation is applied to the normalized line depths, then magnetic-field strengths and inclination angles can be measured very accurately from noisy saturated line profiles. Systematic errors caused by saturation effects can be estimated and reduced by varying one parameter. When a significant fraction of the line profile is unsplit and unpolarized, large errors may be made in measurements of low fields, unless the line is sufficiently weak. For a weak line, a vertical field of 1600 gauss can be measured to 10% accuracy even when 70% of the line profile is stray light. These stray-light errors are troublesome in measuring fields of gaps and pores but not sunspots. Numerical results of the error analysis are presented graphically.

Tarbell, T. D.↗

Two-dimensional fluorescence spectroscopy of uranium isotopes in femtosecond laser ablation plumes

Here, we demonstrate measurement of uranium isotopes in femtosecond laser ablation plumes using two-dimensional fluorescence spectroscopy (2DFS). The high-resolution, tunable CW-laser spectroscopy technique clearly distinguishes atomic absorption from 235 U and 238 U in natural and highly enriched uranium metal samples. We present analysis of spectral resolution and analytical performance of 2DFS as a function of ambient pressure. Simultaneous measurement using time-resolved absorption spectroscopy provides information on temporal dynamics of the laser ablation plume and saturation behavior of fluorescence signals. The rapid, non-contact measurement is promising for in-field, standoff measurements of uranium enrichment for nuclear safety and security.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effects of FeO and CaO/Al{sub 2}O{sub 3} Ratio in Slag on the Cleanliness of Al-Killed Steel

The slag composition plays a critical role in the formation of inclusions and the cleanliness of steel. In this study, the effects of FeO content and the C/A (CaO/Al{sub 2}O{sub 3}) ratio in the slag on the formation of inclusions were investigated based on a 10-minute slag–steel reaction in a MgO crucible. The FeO content in the top slag was shown to have a significant effect on the formation of MgO·Al{sub 2}O{sub 3} spinel inclusions, and critical content exists; when the initial FeO content in the slag was less than 2 pct, MgO·Al{sub 2}O{sub 3} spinel inclusions formed, and the T.O (total oxygen) was 20 ppm; when the initial FeO content in the slag was more than 4 pct, only Al{sub 2}O{sub 3} inclusions were observed and the T.O was 50 ppm. It was clarified that the main source of Mg for the MgO·Al{sub 2}O{sub 3} spinel inclusion formation was the top slag rather than the MgO crucible. In addition, the cleanliness of the steel increased as the initial FeO content in the top slag decreased. As regards the effects of the C/A ratio, the MgO amount in the observed inclusions gradually increased, whereas the T.O content decreased gradually with the increasing C/A ratio. Slag with a composition close to the CaO-saturated region had the best effect on the inclusion absorption.

36 MATERIALS SCIENCE↗

CO oxidation on MgAl 2 O 4 supported Ir n : activation of lattice oxygen in the subnanometer regime and emergence of nuclearity-activity volcano

CO oxidation on Pt group metals is affected by the metal size and reducibility of the oxide support. In this study, we report that Ir supported on MgAl 2 O 4 , traditionally considered non-reducible, exhibits properties similar to reducible oxides when the Ir size is in the subnanometer regime. To show this effect, we synthesized subnanometer Ir clusters and compared their properties to single atoms and nanoparticles (1–1.5 nm). The CO oxidation activity is highest on Ir 0.6–0.8nm while showing distinctly different reaction orders in CO and O 2 (0, +0.4), than single atoms (1, 0) and nanoparticles (–1, +1). Microcalorimetry, in situ X-ray absorption, and infrared spectroscopies show that the CO-saturated Ir 0.6–0.8nm clusters could adsorb and activate O 2 despite binding CO more strongly than nanoparticles. Density functional theory calculations on CO saturated Ir 4 clusters suggest that the increased activity is due to the ability to activate O 2 on oxygen vacancies at the Ir–MgAl 2 O 4 interface. The findings show the important effect of the metal nuclearity on the support and catalyst properties and can guide future design of CO oxidation catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Climatic effects due to halogenated compounds in the earth's atmosphere

Using a one-dimensional radiative-convective model, a sensitivity study is performed of the effect of ozone depletion in the stratosphere on the surface temperature. There could be a cooling of the surface temperature by approximately 0.2 K due to chlorofluoromethane-induced ozone depletion at steady state (assuming 1973 release rates). This cooling reduces significantly the greenhouse effect due to the presence of chlorofluoromethanes. Carbon tetrafluoride has a strong nu sub 3 band at 7.8 microns, and the atmospheric greenhouse effect is shown to be 0.07 and 0.12 K/ppbv with and without taking into account overlap with CH4 and N2O bands. At concentrations higher than 1 ppbv, absorption by the nu sub 3 band starts to saturate and the greenhouse effect becomes less efficient.

Wang, W.-C.↗

Surface (Electro)chemistry of CO 2 on Pt Surface: An in Situ Surface-Enhanced Infrared Absorption Spectroscopy Study

Understanding the surface (electro)chemistry of CO 2 and CO on Pt is needed to design active, selective catalysts for CO-tolerant fuel cell reactions and CO 2 reduction. In this work, the surface reactivity of Pt in a CO 2 -saturated alkaline electrolyte was revealed by combining in situ surface-enhanced infrared absorption spectroscopy (SEIRAS) with density functional theory (DFT) calculations. Here, we show that during potential cycling in 1 M KHCO 3 electrolyte, CO adsorbates (CO ad ), more specifically, CO ad surrounded by OH adsorbates (OH ad ), with linear or bridged configuration, were produced through the reductive adsorption of HCO 3 – catalyzed by H adsorbates on Pt. The CO ad coadsorbed with OH ad was oxidized to COOH ad at potentials as low as ~0.3 V RHE , which was further oxidized to CO 2 at 0.9 V RHE and higher. Further analysis suggests that the proximity between CO ad and OH ad is key to trigger the conversion reaction from CO ad to CO 2 through forming COOH ad intermediate at room temperature. The details about how Pt surface adsorbates change as a function of voltage in CO 2 -saturated alkaline electrolytes can provide strategies to design CO-tolerant catalysts for fuel cell applications and active and selective catalysts for the CO 2 reduction reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel insight into the hydrogen absorption mechanism at the Pd(110) surface

The microscopic mechanism of low-temperature (80 K < T < 160 K) hydrogen (H) ingress into the H{sub 2} (<2.66 × 10{sup −3} Pa) exposed Pd(110) surface is explored by H depth profiling with {sup 15}N nuclear reaction analysis (NRA) and thermal desorption spectroscopy (TDS) with isotope (H, D) labeled surface hydrogen. NRA and TDS reveal two types of absorbed hydrogen states of distinctly different depth distributions. Between 80 K and ∼145 K a near-surface hydride phase evolving as the TDS α{sub 1} feature at 160 K forms, which initially extends only several nanometers into depth. On the other hand, a bulk-absorbed hydrogen state develops between 80 K and ∼160 K which gives rise to a characteristic α{sub 3} TDS feature above 190 K. These two absorbed states are populated at spatially separated surface entrance channels. The near-surface hydride is populated through rapid penetration at minority sites (presumably defects) while the bulk-absorbed state forms at regular terraces with much lower probability per site. In both cases, absorption of gas phase hydrogen transfers pre-adsorbed hydrogen atoms below the surface and replaces them at the chemisorption sites by post-dosed hydrogen in a process that requires much less activation energy (<100 meV) than monatomic diffusion of chemisorbed H atoms into subsurface sites. This small energy barrier suggests that the rate-determining step of the absorption process is either H{sub 2} dissociation on the H-saturated Pd surface or a concerted penetration mechanism, where excess H atoms weakly bound to energetically less favorable adsorption sites stabilize themselves in the chemisorption wells while pre-chemisorbed H atoms simultaneously transit into the subsurface. The peculiarity of absorption at regular Pd(110) terraces in comparison to Pd(111) and Pd(100) is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure, Morphology, Cation Distribution and Magnetic Properties of Cr{sup 3+}-Substituted CoFe{sub 2}O{sub 4} Nanoparticles

The present investigations deal with the effect of trivalent chromium ions (Cr{sup 3+}) on structural and magnetic properties of nanocrystalline cobalt ferrite (CoFe{sub 2}O{sub 4}) nanoparticles. The samples of CoCr{sub x}Fe{sub 2−x}O{sub 4} (where x = 0.0 to 1.0 in step of 0.2) were successfully synthesized by citric acid-assisted sol-gel auto combustion method. Further, the prepared samples were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), infrared spectroscopy (IR) and pulsed field hysteresis loop technique for structural, morphological and magnetic properties analysis, respectively. XRD patterns showed the formation of single-phase cubic spinel structure with broad Bragg’s peak for all the samples. The value of lattice parameter was found to be decreased with chromium substitution x. Cation distribution studies revealed that Co{sup 2+} and Fe{sup 3+} occupied both A and B sites, whereas Cr{sup 3+} ions occupied only B site. SEM analysis of the prepared samples confirmed the nanocrystalline nature of the material. The two absorption bands belonging to spinel structure were observed in IR spectra. Saturation magnetization (M{sub S}), remanence magnetization (M{sub r}) and coercivity (H{sub C}) was found to be decreased with increase in chromium substitution x.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Gamma ray irradiation-induced variations in structure and optical properties of cerium/titanium-doped oxyfluoride transparent glass-ceramics

Highlights: • CeO{sub 2} favors CaF{sub 2} crystallization while TiO{sub 2} suppresses CaF{sub 2} crystallization. • Doping TiO{sub 2} helps reduce intrinsic coloring caused by CeO{sub 2}. • Doping CeO{sub 2} and/or TiO{sub 2} improves defects saturation over irradiation does. • Doping CeO{sub 2} allows lower radiation induced absorption coefficient than co-doping CeO{sub 2}/TiO{sub 2}. - Abstract: CeO{sub 2}/TiO{sub 2}-doped oxyfluoride transparent glass ceramics with a composition of 45SiO{sub 2}–20Al{sub 2}O{sub 3}–10CaO–25CaF{sub 2} were synthesized and irradiated by gamma ray. The effects of CeO{sub 2}/TiO{sub 2} on the structure and optical properties of the samples before and after irradiation were investigated. Doping with CeO{sub 2} causes network depolymerization and conversion of [AlO{sub 6}] to [AlO{sub 4}], enlarging the percolation region and promoting CaF{sub 2} crystallization. Co-doping with CeO{sub 2}/TiO{sub 2} helps reduce the intrinsic coloring of transparent glass ceramics containing only CeO{sub 2}, and the addition of TiO{sub 2} enhances network interconnectivity, suppressing CaF{sub 2} crystallization. Doping with CeO{sub 2} and/or TiO{sub 2} improves the structural stability of transparent glass ceramics upon irradiation and maintains the optical band gap and Urbach energy constant due to the defect saturation over the irradiation dose. Doping solely with CeO{sub 2} allows for a lower radiation-induced absorption coefficient than co-doping CeO{sub 2}/TiO{sub 2} because of the enhanced crystallization induced by CeO{sub 2} and balanceable light absorption of polyvalent cerium ions.

36 MATERIALS SCIENCE↗

RGO/BaFe12O19/Fe3O4 nanocomposite as microwave absorbent with lamellar structures and improved polarization interfaces

Highlights: • RGO/BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} nanocomposite are prepared via a two-step solvothermal method. • The maximum reflection loss can reach −46.04 dB, and the effective absorption bandwidth under −10 dB is 5.68 GHz. • Interfacial polarization as one of the mechanism for the enhanced absorption properties was detailedly analyzed. - Abstract: In this paper, we designed and prepared a composite of BaFe{sub 12}O{sub 19} (BFO) flakes, two-dimensional graphene and Fe{sub 3}O{sub 4} nanoparticles using a two-step solvothermal method. The combination of BFO flakes and two-dimensional graphene could effectively enhance the heterointerface and is believed to be favorable to enhance the interface polarization. The introduction of inverse spinel Fe{sub 3}O{sub 4} as the third phase could increase the saturated magnetization. The phase structure, morphology, magnetic properties and electromagnetic wave absorption performance of the as-prepared samples were characterized. Due to the enhanced interfacial polarization between the BaFe{sub 12}O{sub 19} flakes and graphene, the composite of RGO/BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} exhibits excellent microwave absorption properties. The maximum reflection loss can reach -46.04 dB at 15.6 GHz with a thickness of 1.8 mm, and the effective absorption bandwidth reaches 5.68 GHz (from 11.60 GHz to 17.28 GHz). It is believed that the RGO/BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} composites can find potential application in the field of microwave absorption due to their excellent absorption properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Ligands on Characteristics of (CdSe)13 Quantum Dot

The widespread applications of quantum dots (QDs) have spurred an increasing interest in the study of their coating ligands, which can not only protect the electronic structures of the central QDs, but also control their permeability through biological membranes with both size and shape. In this work, we have used density functional theory (DFT) to investigate the electronic structures of (CdSe)13 passivated by OPMe2(CH2)nMe ligands with different lengths and various numbers of branches (Me=methyl group, n = 0, 1-3). Our results show that the absorption peak in the ultraviolet-visible (UV-vis) spectra displays a clear blue-shift, on the scale of ~100 nm, upon the binding of ligands. Once the total number of ligands bound with (CdSe)13 reached a saturated number (9 or 10), no more blue-shift occurred in the absorption peak in the UV-vis spectra. On the other hand, the aliphatic chain length of ligands has a negligible effect on the optical properties of the QD core. Analyses of the bonding characteristics confirm that optical transitions are dominantly governed by the central QD core rather than the organic passivation. Interestingly, the density of states (DOS) share similar characteristics as vibrational spectra, even though there is no coordination vibration mode between the ligands and the central QD. These findings might provide insights on the material design for the passivation of quantum dots for biomedical applications.

Environmental Molecular Sciences Laboratory↗