Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Wave power”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Periodic structures with time-varying loads

A new method is described for generating and predicting the power scattered at multiple frequencies from a periodic array excited by a monochromatic incident plane wave. The scattered power is predicted by developing an equivalent circuit representation from the exact method of moment solution of the unloaded periodic problem and then employing a modified method of moments approach to predict the scattered fields due to time-varying loads. An advantage of this method is that the generality of the equivalent circuit can be exploited to study the effects of different loads on the power scattered in the harmonic frequencies with a minimal amount of effort. The method can also be applied to multiple incident frequencies.

Epp, Larry W.↗
NASA NTRS2006

Direct Measurement of Wave Kernels in Time-Distance Helioseismology

Solar f-mode waves are surface-gravity waves which propagate horizontally in a thin layer near the photosphere with a dispersion relation approximately that of deep water waves. At the power maximum near 3 mHz, the wavelength of 5 Mm is large enough for various wave scattering properties to be observable. Gizon and Birch (2002,ApJ,571,966)h ave calculated kernels, in the Born approximation, for the sensitivity of wave travel times to local changes in damping rate and source strength. In this work, using isolated small magnetic features as approximate point-sourc'e scatterers, such a kernel has been measured. The observed kernel contains similar features to a theoretical damping kernel but not for a source kernel. A full understanding of the effect of small magnetic features on the waves will require more detailed modeling.

Duvall, T. L., Jr.↗
NASA NTRS2010

Atypical Particle Heating at a Supercritical Interplanetary Shock

We present the first observations at an interplanetary shock of large amplitude (> 100 mV/m pk-pk) solitary waves and large amplitude (approx.30 mV/m pk-pk) waves exhibiting characteristics consistent with electron Bernstein waves. The Bernstein-like waves show enhanced power at integer and half-integer harmonics of the cyclotron frequency with a broadened power spectrum at higher frequencies, consistent with the electron cyclotron drift instability. The Bernstein-like waves are obliquely polarized with respect to the magnetic field but parallel to the shock normal direction. Strong particle heating is observed in both the electrons and ions. The observed heating and waveforms are likely due to instabilities driven by the free energy provided by reflected ions at this supercritical interplanetary shock. These results offer new insights into collisionless shock dissipation and wave-particle interactions in the solar wind.

Wilson, Lynn B., III↗
NASA NTRS2010

Large-Amplitude Electrostatic Waves Observed at a Supercritical Interplanetary Shock

We present the first observations at an interplanetary shock of large-amplitude (> 100 mV/m pk-pk) solitary waves and large-amplitude (approx.30 mV/m pk-pk) waves exhibiting characteristics consistent with electron Bernstein waves. The Bernstein-like waves show enhanced power at integer and half-integer harmonics of the cyclotron frequency with a broadened power spectrum at higher frequencies, consistent with the electron cyclotron drift instability. The Bernstein-like waves are obliquely polarized with respect to the magnetic field but parallel to the shock normal direction. Strong particle heating is observed in both the electrons and ions. The observed heating and waveforms are likely due to instabilities driven by the free energy provided by reflected ions at this supercritical interplanetary shock. These results offer new insights into collisionless shock dissipation and wave-particle interactions in the solar wind.

Wilson, L. B., III↗
NASA NTRS1975

Application of multivariate autoregressive spectrum estimation to ULF waves

The estimation of the power spectrum of a time series by fitting a finite autoregressive model to the data has recently found widespread application in the physical sciences. The extension of this method to the analysis of vector time series is presented here through its application to ULF waves observed in the magnetosphere by the ATS 6 synchronous satellite. Autoregressive spectral estimates of the power and cross-power spectra of these waves are computed with computer programs developed by the author and are compared with the corresponding Blackman-Tukey spectral estimates. The resulting spectral density matrices are then analyzed to determine the direction of propagation and polarization of the observed waves.

Ioannidis, G. A.↗
NASA NTRS1976

The NASA high power carbon dioxide laser: A versatile tool for laser applications

A closed-cycle, continuous wave, carbon dioxide high power laser has been designed and fabricated to support research for the identification and evaluation of possible high power laser applications. The device is designed to generate up to 70 kW of laser power in annular shape beams from 1 to 9 cm in diameter. Electric discharge, either self sustained or electron beam sustained, is used for excitation. This laser facility provides a versatile tool on which research can be performed to advance the state-of-the-art technology of high power CO2 lasers in such areas as electric excitation, laser chemistry, and quality of output beams. The facility provides a well defined, continuous wave beam for various application experiments, such as propulsion, power conversion, and materials processing.

Lancashire, R. B.↗
NASA NTRS2007

High-Power, High-Efficiency Ka-Band Space Traveling-Wave Tube

The L-3 Communications Model 999H traveling-wave tube (TWT) has been demonstrated to generate an output power of 144 W at 60-percent overall efficiency in continuous-wave operation over the frequency band from 31.8 to 32.3 GHz. The best TWT heretofore commercially available for operation in the affected frequency band is characterized by an output power of only 35 W and an efficiency of 50 percent. Moreover, whereas prior TWTs are limited to single output power levels, it has been shown that the output power of the Model 999H can be varied from 54 to 144 W. A TWT is a vacuum electronic device used to amplify microwave signals. TWTs are typically used in free-space communication systems because they are capable of operating at power and efficiency levels significantly higher than those of solid-state devices. In a TWT, an electron beam is generated by an electron gun consisting of a cathode, focusing electrodes, and an anode. The electrons pass through a hole in the anode and are focused into a cylindrical beam by a stack of periodic permanent magnets and travel along the axis of an electrically conductive helix, along which propagates an electromagnetic wave that has been launched by an input signal that is to be amplified. The beam travels within the helix at a velocity close to the phase velocity of the electromagnetic wave. The electromagnetic field decelerates some of the electrons and accelerates others, causing the beam to become formed into electron bunches, which further interact with the electromagnetic wave in such a manner as to surrender kinetic energy to the wave, thereby amplifying the wave. The net result is to amplify the input signal by a factor of about 100,000. After the electrons have passed along the helix, they impinge on electrodes in a collector. The collector decelerates the electrons in such a manner as to recover most of the remaining kinetic energy and thereby significantly increase the power efficiency of the TWT.

Krawczyk, Richard↗
NASA NTRS1987

Evidence for a saturated spectrum of atmospheric gravity waves

The slope and power spectral density of atmospheric velocity fluctuations versus vertical wavenumber at large wavenumbers are observed to be nearly independent of altitude. It is suggested that such a universality is due to saturation of short vertical-scale fluctuations. A brief review of linear gravity wave saturation theory indicates a physical basis for such spectra. It is demonstrated that observed saturation spectra are not solely due to individually saturated waves but most likely result from amplitude limiting instabilities arising from wave superposition. It is also shown that, while the spectrum is saturated at large wavenumbers, the total kinetic energy per unit mass and the characteristic vertical wavelength increase with altitude. Both of these predictions are consistent with observations.

Smith, Steven A.↗
NASA NTRS1972

Laser power stations in orbit.

Potential laser applications for space-borne power generation are discussed in the light of the current state of the art. The feasible ranges of various laser classes with standing waves are estimated. Power and efficiency, mirror factors, phased-array performance and beam patterns are analyzed as selection characteristics. Other topics include the maximum receiving-element size, energy conversion, pointing and tracking, causes of deformation, and mirror distortions. It is theorized that a nuclear-fueled laser satellite could beam power to distances twice the earth-sun distance with predictable pointing accuracies.

Hansen, C. F.↗
NASA NTRS2003

Analysis of Wave and Particle Signatures Observed in Plasma Escape at Venus

Atmospheric gases escape from Venus as neutral and ionized atoms and molecules. Ion escape, considered here, occurs through ion pickup or collective plasma processes. The latter can arise from upward flow of nightside ionospheric plasma into the ionotail, day to night ionospheric flow into the ionotail, and scavenging of ionospheric plasma by ionosphere-magnetosheath instabilities at the ionopause. These plasma processes produce differing signatures in ion velocity and energy distributions and in ULF waves in the magnetic field. Using plasma ion spectra measured by the Pioneer Venus Orbiter (PVO) Orbiter Plasma Analyzer (OPA) and magnetic field fluctuations observed by the PVO Orbiter Magnetometer (OMAG) along with the expected particle and field signatures, various ion escape processes occurring along Pioneer Venus orbits are identified. In particular, OPA ion energy distributions are used in parallel with magnetic field power spectra and wave phase angles derived from OMAG measurements to study the characteristics of escaping ions. The principle ions observed escaping the influence of Venus are H+, He+ and 0'. In the ion energy distributions of the OPA, pickup ions appear hot relative to the much cooler ions flowing away from Venus in the ionotail and in the plasma clouds detached from the ionopause. This energy contrast is particularly evident downstream when PVO crosses the ionotail boundary from the hot solar wind plasma to the much cooler plasma within the tail. Magnetic field signatures accompanying the escaping ions appear as peaks in the power spectra at the corresponding ion cyclotron frequencies. Also, coherent wave trains at the same frequencies are observed in the phase angle plots of magnetic field fluctuations about the mean field.

Hartle, R. E.↗
NASA NTRS2002

A Cryogenic Half-Wave Plate Module to Measure Polarization at Multiple FIR Passbands

One of the key components in a far-infrared polarimeter that is being designed at the University of Chicago is a locally-powered half-wave plate module. This compact, lightweight, and reliable module will operate at cryogenic temperatures, rotating a half-wave plate about its axis within the optical path. By doing so, polarization measurements can be made. Further, by utilizing multiple half-wave plate modules within the polarimeter, multiple wavelengths or passbands can be studied. In this paper, we describe the design and performance of a relatively inexpensive prototype module that was assembled and tested successfully, outline the difficulties that had to be overcome, and recommend improvements to future modules. This effort now lays some of the groundwork for a next-generation polarimeter for far-infrared astronomy.

Rennick, Timothy S.↗
NASA NTRS1994

Theoretical calculations of ion acceleration in the vicinity of comet Giacobini-Zinner

Ionization of cometary neutral molecules produces ions which are picked up by the solar wind. The cometary ion pickup process for comet Giacobini-Zinner is studied in two ways: (1) with a test particle method in which trajectories are numerically calculated for several thousand ions whose initial locations were chosen randomly with probability proportional to the neutral density and (2) with a quasi-linear diffusion model. The cometary ion distribution function was calculated with the test particle model at several locations upstream of the bow shock and for several types of magnetic fluctuations (or waves). These waves were allowed to propagate in both directions along the magnetic field at the Alfven speed. Both pitch angle scattering and energy diffusion are evident in the derived ion distributions. The monochromatic waves result in less ion acceleration than turbulent fluctuations with about the same amplitude. The calculated ion distribution functions are in reasonable agreement with the distributions measured in the vicinity of comet Giacobini-Zinner in 1985 by particle detectors on the ICE spacecraft when the ratio of power in sunward propagating Alfven waves to the power in antisunward propagating waves is assumed to lie between about 20% and 50%. However, the quasi-linear diffusion model results agree best with the measured distribution functions when the power ratio is only about 3 percent.

Mckenzie, M. L.↗
NASA NTRS1975

Flow lasers

The present work reviews the fluid-mechanical aspects of high-power continuous-wave (CW) lasers. The flow characteristics of these devices appear as classical fluid-mechanical phenomena recast in a complicated interactive environment. The fundamentals of high-power lasers are reviewed, followed by a discussion of the N2-CO2 gas dynamic laser. Next, the HF/DF supersonic diffusion laser is described, and finally the CO electrical-discharge laser is discussed.

Christiansen, W. H.↗
NASA NTRS1996

Wave Engine Topping Cycle Assessment

The performance benefits derived by topping a gas turbine engine with a wave engine are assessed. The wave engine is a wave rotor that produces shaft power by exploiting gas dynamic energy exchange and flow turning. The wave engine is added to the baseline turboshaft engine while keeping high-pressure-turbine inlet conditions, compressor pressure ratio, engine mass flow rate, and cooling flow fractions fixed. Related work has focused on topping with pressure-exchangers (i.e., wave rotors that provide pressure gain with zero net shaft power output); however, more energy can be added to a wave-engine-topped cycle leading to greater engine specific-power-enhancement The energy addition occurs at a lower pressure in the wave-engine-topped cycle; thus the specific-fuel-consumption-enhancement effected by ideal wave engine topping is slightly lower than that effected by ideal pressure-exchanger topping. At a component level, however, flow turning affords the wave engine a degree-of-freedom relative to the pressure-exchanger that enables a more efficient match with the baseline engine. In some cases, therefore, the SFC-enhancement by wave engine topping is greater than that by pressure-exchanger topping. An ideal wave-rotor-characteristic is used to identify key wave engine design parameters and to contrast the wave engine and pressure-exchanger topping approaches. An aerodynamic design procedure is described in which wave engine design-point performance levels are computed using a one-dimensional wave rotor model. Wave engines using various wave cycles are considered including two-port cycles with on-rotor combustion (valved-combustors) and reverse-flow and through-flow four-port cycles with heat addition in conventional burners. A through-flow wave cycle design with symmetric blading is used to assess engine performance benefits. The wave-engine-topped turboshaft engine produces 16% more power than does a pressure-exchanger-topped engine under the specified topping constraints. Positive and negative aspects of wave engine topping in gas turbine engines are identified.

Welch, Gerard E.↗
NASA NTRS1987

Rayleigh lidar observations of gravity wave activity in the stratosphere and lower mesosphere

Forty-two monochromatic gravity wave events were observed in the 25 to 55 km altitude region during 16 nights of Rayleigh lidar measurements at Poker Flat, Alaska and Urbana, Illinois. The measured wave parameters were compared to previous radar and lidar measurements of gravity wave activity. Vertical wavelengths, lambda(z), between 2 and 11.5 km with vertical phase velocities, c(z), between 0.1 and 1 m/s were observed. Measured values of lambda(z) and c(z) were used to infer observed wave periods, T(ob), between 50 and 1000 minutes and horizontal wavelengths, lambda(x), from 25 to 2000 km. Dominant wave activity was found at vertical wavelengths between 2 to 4 km and 7 to 10 km. No seasonal variations were evident in the observed wave parameters. Vertical and horizontal wavelengths showed a clear tendency to increase with T(ob), which is consistent with recent sodium lidar studies of monochromatic wave events near the mesopause. Measured power law relationships between the wave parameters were lambda(z) varies as T(ob) sup 0.96, lambda(x) varies as T(ob) sup 1.8, and c(z) varies as T(ob) sup -0.85. The kinetic energy calculated for the monochromatic wave events varied as k(z) sup -2, k(x) sup -1, and f(ob) sup -1.7. The atmospheric scale heights calculated for each observation date range from 6.5 to 7.6 km with a mean value of 7 km. The increase of rms wind perturbations with altitude indicated an amplitude growth length of 20.9 km. The altitude profile of kinetic energy density decreased with height, suggesting that waves in this altitude region were subject to dissipation or saturation effects.

Miller, M. S.↗
NASA NTRS1987

A new interpretation of plasma-line overshoot phenomena

The temporal evolution of Langmuir waves excited by high-power, high-frequency (HF) radio waves in the ionosphere is studied theoretically. This study is motivated by past observations made with the 450 MHz radar at Arecibo Observatory in Puerto Rico. Two kinds of nonlinear damping to the parametric decay instability are considered in the derivation of the rate equation for the spectral intensity of enhanced Langmuir waves. They are Langmuir wave cascading caused by nonlinear Landau damping and cross-field electron diffusion. The first damping process leads to the saturation of individual unstable Langmuir wave. The second process, which results from the incoherent scattering of electron orbits by the total excited Langmuir waves, yields anomalous damping that applies to each Langmuir wave. Consequently, Langmuir waves with smaller growth rates will be suppressed by those with larger growth rates. Such a mode competition process may cause the overshoot of the HF-enhanced plasma line observed with the Arecibo 430 MHz radar. Favorable agreement is obtained between theory and the Arecibo observations.

Kuo, S. P.↗
NASA NTRS2011

3D Modeling of Ultrasonic Wave Interaction with Disbonds and Weak Bonds

Ultrasonic techniques, such as the use of guided waves, can be ideal for finding damage in the plate and pipe-like structures used in aerospace applications. However, the interaction of waves with real flaw types and geometries can lead to experimental signals that are difficult to interpret. 3-dimensional (3D) elastic wave simulations can be a powerful tool in understanding the complicated wave scattering involved in flaw detection and for optimizing experimental techniques. We have developed and implemented parallel 3D elastodynamic finite integration technique (3D EFIT) code to investigate Lamb wave scattering from realistic flaws. This paper discusses simulation results for an aluminum-aluminum diffusion disbond and an aluminum-epoxy disbond and compares results from the disbond case to the common artificial flaw type of a flat-bottom hole. The paper also discusses the potential for extending the 3D EFIT equations to incorporate physics-based weak bond models for simulating wave scattering from weak adhesive bonds.

Leckey, C.↗