Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WRF simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

City-Scale Building Anthropogenic Heating during Heat Waves

More frequent and longer duration heat waves have been observed worldwide and are recognized as a serious threat to human health and the stability of electrical grids. Past studies have identified a positive feedback between heat waves and urban heat island effects. Anthropogenic heat emissions from buildings have a crucial impact on the urban environment, and hence it is critical to understand the interactive effects of urban microclimate and building heat emissions in terms of the urban energy balance. Here we developed a coupled-simulation approach to quantify these effects, mapping urban environmental data generated by the mesoscale Weather Research and Forecasting (WRF) coupled to Urban Canopy Model (UCM) to urban building energy models (UBEM). We conducted a case study in the city of Los Angeles, California, during a five-day heat wave event in September 2009. We analyzed the surge in city-scale building heat emission and energy use during the extreme heat event. We first simulated the urban microclimate at a high resolution (500 m by 500 m) using WRF-UCM. We then generated grid-level building heat emission profiles and aggregated them using prototype building energy models informed by spatially disaggregated urban land use and urban building density data. The spatial patterns of anthropogenic heat discharge from the building sector were analyzed, and the quantitative relationship with weather conditions and urban land-use dynamics were assessed at the grid level. The simulation results indicate that the dispersion of anthropogenic heat from urban buildings to the urban environment increases by up to 20% on average and varies significantly, both in time and space, during the heat wave event. The heat dispersion from the air-conditioning heat rejection contributes most (86.5%) of the total waste heat from the buildings to the urban environment. We also found that the waste heat discharge in inland, dense urban districts is more sensitive to extreme events than it is in coastal or suburban areas. The generated anthropogenic heat profiles can be used in urban microclimate models to provide a more accurate estimation of urban air temperature rises during heat waves.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

High-Resolution Wind Resource Data Set of the Greater Puerto Rico Region

In February 2022, the U.S. Department of Energy and six national laboratories launched the Puerto Rico Grid Resilience and Transitions to 100% Renewable Energy Study (PR100). PR100 aims to provide a comprehensive analysis of possible pathways for Puerto Rico's energy future, with a goal of 100% renewable energy by 2050. As a part of the renewable energy potential assessment in this project, we developed 20 years (2001-2020) of data using a numerical weather prediction (NWP) model for onshore and offshore wind resource assessment for the Puerto Rico. The research steps in developing the long-term wind resource data sets based on the NWP model were: 1. Model wind resource based on the Weather Research and Forecasting (WRF) model. 2. Develop WRF model configurations for Puerto Rico. 3. Test WRF with 11 different physics parameterizations for planetary boundary layer (PBL). 4. Assess WRF output from the different PBL schemes against observations. 5. Select a final model configuration which can produce the modeled wind speed with sufficient accuracy. 6. Produce 20 years wind resource data sets for Puerto Rico region. In the first stage of our framework for developing wind resource data, we developed a WRF model configuration using two nested domains (9 km and 3 km) to cover Puerto Rico and U.S. Virgin Islands and downscale the ERA5 reanalysis data (0.25 degrees x 0.25 degrees; hourly interval) to a 3-km domain. For the second stage, we implemented one-year simulations focused on using 11 different PBL physics parameterizations to find a combination of WRF physics parameterizations that could provide accurately modeled wind speed for Puerto Rico. We also analyzed the sensitivity of the modeled wind speed to PBL schemes for onshore and offshore locations. The WRF output resulting from the 11 WRF experiments using different PBL parameterizations were evaluated against observations obtained from the National Data Buoy Center (NDBC) as well as at hub height for a location for which measurements were available. A final model setup selected through the validation with observational data was used to produce 20 years of data with 3-km spatial and 5-minute temporal resolution. The WRF model output was post-processed to include wind profiles and basic atmospheric variables in a format that can be easily used for downstream modeling. The 20 years of wind resource data will be made available through NREL and support the estimation of wind energy development costs for the PR100 study.

17 WIND ENERGY↗
DOE OSTI2022

Impact of Meteorological Factors on the Mesoscale Morphology of Cloud Streets during a Cold-Air Outbreak over the Western North Atlantic

We report postfrontal clouds (PFC) are ubiquitous in the marine boundary layer, and their morphology is essential to estimating the radiation budget in weather and climate models. Here we examine the roles of sea surface temperature (SST) and meteorological factors in controlling the mesoscale morphology and evolution of shallow clouds associated with a cold-air outbreak that occurred on 1 March 2020 during phase I of the Aerosol Cloud Meteorology Interactions over the Western Atlantic Experiment (ACTIVATE). Our results show that the simulated PFC structure and ambient conditions by the Weather Research and Forecasting (WRF) Model are generally consistent with observations from GOES-16 and dropsonde measurements. We also examine the thermodynamical and dynamical influences in the cloud mesoscale morphology using WRF sensitivity experiments driven by two meteorological forcing datasets with different domain-mean SST and spatial gradients, which lead to dissimilar values of hydrometeor water path and cloud core fraction. The SST from ERA5 leads to weaker stability and higher inversion height than the SST from FNL does. In addition, the use of large-scale meteorological forcings from ERA5 yields a distinctive time evolution of wind direction shear in the inner domain, which favors the formation and persistence of longer cloud rolls. Both factors contribute to a change in the time evolution of domain-mean water path and cloud core fraction of cloud streets. Our study takes advantage of the simulation driven by the differences between two large-scale forcing datasets to illustrate the importance of SST and wind direction shear in the cloud street morphology in a realistic scenario.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

A numerical simulation of CCN impacts on weather modification efficiency

Aerosols affect development of clouds and precipitation by serving as cloud condensation nuclei (CCN) and ice nuclei (IN). Considering the dramatically changing ambient aerosol concentration, it is important to examine the potential “side effect” of aerosol pollution on precipitation enhancement by weather modification. In this study, the cloud seeding was performed on a precipitation event in Beijing in the summer of 2008, which is simulated by the NSSL two-moment cloud scheme of the Weather Research and Forecasting (WRF) model. Sensitivity tests were conducted by modifying the ambient aerosol concentration and the ice crystal seeding amount to investigate the cloud seeding efficacy in different CCN concentration scenarios. There was a slight difference in the precipitation distribution between the simulations with two ambient CCN concentrations: the northern precipitation center in polluted scenario was weaker and the southern center was stronger. Compared with normal CCN scenario, the cloud liquid water mass and ice crystal mass in the severe pollution scenario is larger, and the total contents of snow and graupel were not sensitive to the CCN concentration. With the same amount of man-made ice crystals seeding, the precipitation enhancement was quite different under different CCN conditions. The higher the CCN concentration usually leads to stronger precipitation suppression. As CCN concentration increase, the deposition growth of snow, auto-conversion and accretion of ice crystals to snow were weakened, as well as the conversion of melting snow and graupel into rainwater.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Multi-Scale Simulation of Wind Farm Performance during a Frontal Passage

Predicting the response of wind farms to changing flow conditions is necessary for optimal design and operation. Here in this work, simulation and analysis of a frontal passage through a utility scale wind farm is achieved for the first time using a seamless multi-scale modeling approach. A generalized actuator disk (GAD) wind turbine model is used to represent turbine–flow interaction, and results are compared to novel radar observations during the frontal passage. The Weather Research and Forecasting (WRF) model is employed with a nested grid setup that allows for coupling between multi-scale atmospheric conditions and turbine response. Starting with mesoscale forcing, the atmosphere is dynamically downscaled to the region of interest, where the interaction between turbulent flows and individual wind turbines is simulated with 10 m grid spacing. Several improvements are made to the GAD model to mimic realistic turbine operation, including a yawing capability and a power output calculation. Ultimately, the model is able to capture both the dynamics of the frontal passage and the turbine response; predictions show good agreement with observed background velocity, turbine wake structure, and power output after accounting for a phase shift in the mesoscale forcing. This study demonstrates the utility of the WRF-GAD model framework for simulating wind farm performance under complex atmospheric conditions.

17 WIND ENERGY↗
DOE OSTI2020

Understanding Irrigation Impacts on Low-Level Jets over the Great Plains

Low-level jets (LLJs) over the Great Plains are well-known for their importance in transporting moisture from the Gulf of Mexico and forming precipitation in the Central US. However, the impact of irrigation practice on LLJs is rarely studied. To understand the irrigation impact on the Great Plains LLJs, the Weather Research and Forecasting (WRF) model is employed with and without an irrigation scheme. The simulated wind field is evaluated against the observed wind from Midlatitude Continental Convective Clouds Experiment (MC3E). The results show that adding irrigation improves the simulated wind, especially at lower altitudes below 800 hPa. Irrigation reduces the LLJ frequency over the Great Plains, mainly by reducing the intense LLJ frequency. The reduced LLJ frequency is caused by the irrigation-induced weakening of meridional wind. The favorable conditions for LLJs have been identified by examining the mechanism associated with LLJs: a ridge-like pattern with weak and calm synoptic-scale conditions in the mid-levels and a strong west-east temperature gradient at lower levels that promote meridional winds. Irrigation-induced cooling leads to a baroclinic pattern with high pressure at lower altitudes over the irrigation region and low pressure in the mid- and upper levels in the downstream region, resulting in a northerly component that hinders the formation of LLJs. Low-level surface cooling also decreases the west-east temperature gradient and hence weakens the thermal wind forcing. The irrigation-induced mid-level low and weaker west-east temperature gradient are responsible for the reduced meridional winds and the reduced LLJ frequencies.

Yang, Zhao↗
DOE OSTI2023

Impact of Wildfires on Solar Resource Availability in California in a Changing Climate

Wildfires can emit large amounts of atmospheric particulate matters and influence not only air quality but also availability of photovoltaic (PV) generation due to scattering and absorption of solar radiation. Under anthropogenic changing climate, wildfire activity is projected to increase over western North America due to drier and warmer climate, implying increasing impact on solar resource and larger uncertainty in solar generation especially in regions with faster PV penetration. This study focuses on quantifying the impact of wildfires on aerosol optical depth (AOD) and thus solar resource over California using National Solar Radiation Database (NSRDB), developed by the National Renewable Energy Laboratory (NREL). This assessment includes historical analysis and estimation of solar resource under wildfire scenarios (2020 wildfire and an enhanced wildfire scenario based on 2020 wildfires). Historical analysis for the period of July-October 2019/2020 (low/high fire activity period) shows that the averaged global horizontal irradiance (GHI) and direct normal irradiance (DNI) are reduced by about 30 and 90 W m-2 (5.6 and 15.3%), respectively, during high fire activity period. To create AOD dataset for enhanced fire scenario, 165% increase in burn area (in around 2050) is selected based on comprehensive literature review, which is further applied to the Fire INventory from NCAR (FINN) fire emission. WRF-Chem model with the enhanced FINN emissions is used to simulate and represent a preserving spatial distribution of burned areas and wildfire-emitted aerosols. Our initial analysis suggests that the"enhanced 2020 wildfire" AOD can increase by a factor of 1.3 - 2, which can significantly reduce solar irradiance and increase uncertainty in generation and reliability of power system in extreme wildfire events under a high solar penetration scenario. Overall, this study provides an estimate of the impacts of wildfires on solar resource to make informed decisions on reserve planning, generation scheduling, and reliability investments.

aerosol optical depth↗
DOE OSTI2021

Time Evolution and Diurnal Variability of the Parametric Sensitivity of Turbine-Height Winds in the MYNN-EDMF Parameterization

The Mellor-Yamada-Nakanishi-Niino (MYNN) parameterization applied in the Weather Research and Forecasting (WRF) model has been augmented to include the Eddy-Diffusion Mass-Flux (EDMF) approach to better represent transport by boundary-layer eddies. This change includes the addition of new parameters associated with convective updrafts and boundary-layer clouds. These additions lead to new parametric sensitivities in the hub-height wind speed compared to simulations using the standard MYNN parameterization that were explored previously. This work builds on efforts focused on WRF’s MYNN parameterization by examining the sensitivity of hub-height wind speed to parameters in the MYNN-EDMF parameterization as a function of simulation lead time. Summer and winter periods were selected from the second Wind Forecast Improvement Project (WFIP2). Five sets of simulations were completed for each season, with lead times ranging from 2 to 6 days. The results show that the sensitivity to the new parameters associated with the EDMF scheme is generally small compared to other parameters, with the largest impact in convective boundary layers. The spread in the perturbed parameter ensembles was found to grow quickly over the first 8 to 19 hours in the summer simulations and 17 to 24 hours in the winter simulations with little change after that, regardless of the simulation length. A strong diurnal cycle in the parameter sensitivity was also found associated with changes in the atmospheric stability, as well as an increase in the sensitivity to the entrainment parameter used in the EDMF parameterization that is associated with increasing fractional areas covered by plumes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Sensor Placement Optimization Study for the Built Environment: Operational Use Cases

Systems of fixed-position radiation sensors can provide information that assists emergency responders following nuclear and radiological incidents. State, local, tribal, and territorial (SLTT) government agencies that implement systems of fixed-position sensors are faced with numerous decisions regarding sensor selection, quantity, and placement. To develop guidance on implementation of radiation detection systems, we simulated the release of radioactive material in an urban environment using a combination of three models: the Weather Research Forecasting (WRF), Quick Urban and Industrial Complex (QUIC), and Monte Carlo N-Particle (MCNP) models. We then evaluated the performance of several hypothetical sensor systems. The small number of simulations we conducted are not sufficient to generate definitive design guidance for radiation sensor systems, but we did identify trends that would be of interest to emergency planners. For a scenario that releases 1000 curies of Cs-137, radiation detectors were needed at 500-meter intervals to have a high likelihood of event detection and to estimate source location and plume detection. We also noted that optimal detector altitude varied with distance to the source. We recommend additional research in this area be conducted to support developing sensor placement guidelines that expand on a range of locations, isotopes, activity levels, and different weather conditions. Original simulation strategies included a range of environments, additional radioisotopes (Am241 and AmBe), and a larger selection of sensor types. These types of expansions would support SLTT guidance on sensor system recommendations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Reconciliation of asynchronous satellite-based $\mathrm{NO_2}$ and $\mathrm{XCO_2}$ enhancements with mesoscale modeling over two urban landscapes

Fossil fuel carbon dioxide (CO 2ff ), the main driver of global warming and climate change, is often co-emitted with nitrogen oxides (NO x ) and precursors to ground-level ozone from anthropogenic sources like power plants or vehicles. In urban and suburban areas, satellite-based NO 2 can be used as a proxy to track the emissions of CO 2ff . Because of NO 2 ’s shorter lifetime, urban NO 2 plumes are more distinguishable from backgrounds and more sensitive to variations in emissions. However, the combination of these two gases is limited by the asynchrony among NO 2 and CO 2 monitoring satellites. We used CO 2ff simulated by the Weather Research and Forecasting model coupled with Chemistry (WRF-Chem) model to reconcile the tropospheric NO 2 vertical column density (VCD) from the Tropospheric Monitoring Instrument (TROPOMI) and column-averaged dry-air mole fractions of carbon dioxide enhancements (ΔXCO 2 ) from Orbiting Carbon Observatory 3 (OCO-3) Snapshot Area Maps (SAMs) over a multicity area, Washington D.C.-Baltimore (DC-Balt), and a basin city, Mexico City. NO 2 /CO 2ff ratios over DC-Balt are smaller than Mexico City, indicative of stricter emission restrictions, a more combustion-efficient vehicle fleet, and higher combustion efficiency due to lower altitude in DC-Balt. For single-track cases, the spatial correlations between NO 2 and ΔXCO 2 over Mexico City are stronger than DC-Balt because the NO 2 and CO 2 are mostly trapped in the valley of Mexico City, while DC-Balt is severely affected by distant sources (i.e., US East Coast cities). Using multi-track averaging, spatial correlation coefficients increase with the number of days used for averaging. The correlations reached a maximum when averaging >12 continuous images for DC-Balt and > 10 continuous images for Mexico City. This finding indicates that multi-track averaging using modeled CO 2ff as a proxy is helpful to filter the noise in single-track images, to cancel the interference from distant sources, and to magnify correlations between NO 2 and CO 2ff . Mexico City showed stronger spatial correlations but weaker temporal correlations than DC-Balt due to biomass burning hot spots and large transport errors caused by the trapping effects of the surrounding mountains. Tracking the 20-day moving average of CO 2ff emissions using TROPOMI NO 2 seems technically feasible, considering the relationship between correlation coefficients and the number of available satellite images.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Tendencies of Soil Microbial NO Emissions During HI‐SCALE as Predicted by a Nitrification/Denitrification Scheme

Many atmospheric chemical processes, including the formation of secondary organic aerosol (SOA), are strongly modulated by the reactions of NO and NO 2 (NO x ). Though NO x is controlled by anthropogenic emissions near urban areas, in rural areas soil microbes can be a significant contribution to NO emission globally. The relative rates of emissions of different nitrogen-containing species (e.g., NO, N 2 O, HONO, and N 2 ) are strong functions of soil properties such as temperature, moisture content, pH, and soil carbon and nitrogen pools. However, typical large-scale biogeochemical models either express these emissions simplistically, or not at all. Here we investigate the potential impact of soil NO emissions on atmospheric chemistry and SOA formation over regional and monthly time scales, specifically the 2016 spring and summer Intensive Observational Periods (IOPs) of the Holistic Interactions of Shallow Clouds, Aerosols and Land Ecosystems (HI-SCALE) field campaign. We implement the soil NO nitrification/denitrification parameterization of Rasool et al. (2019) into the Weather Research and Forecasting model coupled with Chemistry (WRF-Chem), supplemented by a 1-km soil moisture analysis. We then simulate both IOPs over the U.S. Great Plains, evaluating against ground stations and flight data. We show that soil NO emissions can account for a large fraction of total NO x and locally increase O 3 concentrations by up to 25%, while alleviating negative biases of gases and aerosols toward observations. Soil moisture and temperature changes between IOP1 and IOP2 lead to overall differences in emissions, but with large regional variability due to heterogeneous surface characteristics.

Atmoshpheric Chemistry↗
DOE OSTI2022

Studying Cloud and Radiative Impacts Through an Improved Physically Based Representation of Organic Aerosol in a Large-Scale Model (WRF-Chem) (Final Report)

The work performed under this award resulted in the development of a computationally-efficient kinetic model to simulate the chemistry, thermodynamics, and microphysics of organic aerosol. Versions of the kinetic model were used to study a suite of aerosol processes including, multigenerational gas-phase chemistry, phase-state influenced gas/particle partitioning, heterogeneous oxidation, oligomerization reactions, and experimental artifacts. The kinetic model has now been implemented into a regional chemistry-climate model (WRF-Chem) to further study the formation, evolution, properties, and spatiotemporal distribution of organic aerosol at urban, regional, and global scales.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Cold-Season Precipitation Sensitivity to Microphysical Parameterizations: Hydrologic Evaluations Leveraging Snow Lidar Datasets

Abstract Cloud microphysical processes are an important facet of atmospheric modeling, as they can control the initiation and rates of snowfall. Thus, parameterizations of these processes have important implications for modeling seasonal snow accumulation. We conduct experiments with the Weather Research and Forecasting (WRF V4.3.3) Model using three different microphysics parameterizations, including a sophisticated new scheme (ISHMAEL). Simulations are conducted for two cold seasons (2018 and 2019) centered on the Colorado Rockies’ ∼750-km 2 East River watershed. Precipitation efficiencies are quantified using a drying-ratio mass budget approach and point evaluations are performed against three NRCS SNOTEL stations. Precipitation and meteorological outputs from each are used to force a land surface model (Noah-MP) so that peak snow accumulation can be compared against airborne snow lidar products. We find that microphysical parameterization choice alone has a modest impact on total precipitation on the order of ±3% watershed-wide, and as high as 15% for certain regions, similar to other studies comparing the same parameterizations. Precipitation biases evaluated against SNOTEL are 15% ± 13%. WRF Noah-MP configurations produced snow water equivalents with good correlations with airborne lidar products at a 1-km spatial resolution: Pearson’s r values of 0.9, RMSEs between 8 and 17 cm, and percent biases of 3%–15%. Noah-MP with precipitation from the PRISM geostatistical precipitation product leads to a peak SWE underestimation of 32% in both years examined, and a weaker spatial correlation than the WRF configurations. We fall short of identifying a clearly superior microphysical parameterization but conclude that snow lidar is a valuable nontraditional indicator of model performance.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Orographic enhancement of rainfall over the Congo Basin

Abstract The Congo rainforest located in central equatorial Africa is an important, yet understudied part of the globe surrounded by complex orographic features. A primitive understanding of precipitation processes such as mesoscale convective dynamics magnifies uncertainties in the future climate projections of the hydrological cycle over the Congo. Furthermore, the effects of orography, which is an important forcing for convection and precipitation, are poorly resolved by climate models, and ill‐conceptualized over the Congo. To address this knowledge gap, perturbed orographic forcing experiments are conducted using the Weather Research and Forecasting (WRF) mesoscale numerical model in a high‐resolution convection‐permitting model setup. The model simulated selected dates in November 2014. The thunderstorms and rainfall simulated in the control run for the case study analyzed in this article compared reasonably well to satellite‐derived brightness temperature and rainfall data. The results from this case study show that the dynamical impact of increasing the height of the East African Highlands is the blocking of the lower‐tropospheric tropical easterlies. This weakening of the lower‐tropospheric zonal winds increases the windshear over the Congo Basin resulting in slower propagating, more intense mesoscale convective systems with enhanced rainfall.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Structural Uncertainty in the Sensitivity of Urban Temperatures to Anthropogenic Heat Flux

One key source of uncertainty for weather and climate models is structural uncertainty arising from the fact that these models must simplify or approximate complex physical, chemical, and biological processes that occur in the real world. However, structural uncertainty is rarely examined in the context of simulated effects of anthropogenic heat flux in cities. Using the Weather Research and Forecasting (WRF) model coupled with a single-layer urban canopy model, it is found that the sensitivity of urban canopy air temperature to anthropogenic heat flux can differ by an order of magnitude depending on how anthropogenic heat flux is released to the urban environment. Moreover, varying model structures through changing the treatment of roof-air interaction and the parameterization of convective heat transfer between the canopy air and the atmosphere can affect the sensitivity of urban canopy air temperature by a factor of 4. Urban surface temperature and 2-m air temperature are less sensitive to the methods of anthropogenic heat flux release and the examined model structural variants than urban canopy air temperature, but their sensitivities to anthropogenic heat flux can still vary by as much as a factor of 4 for surface temperature and 2 for 2-m air temperature. Our study recommends using temperature sensitivity instead of temperature response to understand how various physical processes (and their representations in numerical models) modulate the simulated effects of anthropogenic heat flux.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Representations of Precipitation Diurnal Cycle in the Amazon as Simulated by Observationally Constrained Cloud‐System Resolving and Global Climate Models

Abstract The ability of an observationally‐constrained cloud‐system resolving model (Weather Research and Forecasting; WRF, 4‐km grid spacing) and a global climate model (Energy Exascale Earth System Model; E3SM, 1‐degree grid spacing) to represent the precipitation diurnal cycle over the Amazon basin during the 2014 wet season is assessed. The WRF model coupled with a 3‐D variational data assimilation scheme reproduces the spatial variability of the precipitation diurnal cycle over the basin and the lifecycle of westward propagating MCSs initiated by the coastal sea‐breeze front. In contrast, a single morning peak in rainfall is produced by E3SM for simulations despite the nudging of large‐scale winds toward global reanalysis, indicating precipitation in E3SM is largely controlled by local convection associated with diurnal heating. The role of propagating MCS on the environment are discussed by using a multivariate perturbation analysis. We also find that the advection of moisture perturbations from ocean to inland regions have a higher correlation with the occurrence of MCSs in the Amazon than the intensity of colder air intrusion associated with sea breezes along the coast. Moreover, the presence of large cold pools over the central Amazon basin are responsible for the maintenance of propagating deep convection.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Modeling the impact of extreme weather events and future climate on the radiologically contaminated sites of Enewetak Atoll

Enewetak Atoll underwent 43 historical nuclear tests from 1948 to 1958, including the first hydrogen bomb test, resulting in a substantial nuclear material fallout contaminating the Atoll and the lagoon waters. The radionuclide fallout material deposited in lagoon sediments and land soil will remain for decades to come. With intensifying climate and extreme weather events, the possibility of redistribution of deposited radionuclide material has become a great concern. This study uses a numerical modeling approach to estimate the potential elevated radionuclide concentrations that can be distributed during storm events under current and future climates. We simulated three historical storm scenarios that are most likely to impact Atoll’s environment and remobilize the radionuclide-bound sediments. WRF-ARW was used to reconstruct these storm scenarios under current year (2015) and future year (2090) climates. Storm-induced ocean hydrodynamics conditions were generated using FVCOM. FVCOM-ICM was externally coupled to simulate the fate and transport of radionuclides. Given that the 239 Pu is the largest inventory of the lagoon and Atoll islands, the model results show the highest average 239 Pu concentration that an island may be exposed to is 3.25E-4 Bq/m 3 (becquerel per cubic meters), which is an increase of 84 times the average baseline/existing 239 Pu concentration without the storm conditions. The overall increase in 239 Pu average over all the islands of Atoll is about 20 folds relative to the baseline concentration. Despite the high relative increase ratios, the significantly low activity concentrations may not pose an immediate exposure risk. However, due to the limitations of the study and uncertainties/biases in the historical data used, further research supported by field surveys to better characterize the current contamination level may be needed to make more accurate predictions.

54 ENVIRONMENTAL SCIENCES↗