Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WIND DIFFUSION MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

DIRECT NUMERICAL SIMULATION OF RADIATION PRESSURE-DRIVEN TURBULENCE AND WINDS IN STAR CLUSTERS AND GALACTIC DISKS

The pressure exerted by the radiation of young stars may be an important feedback mechanism that drives turbulence and winds in forming star clusters and the disks of starburst galaxies. However, there is great uncertainty in how efficiently radiation couples to matter in these high optical depth environments. In particular, it is unclear what levels of turbulence the radiation can produce, and whether the infrared radiation trapped by the dust opacity can give rise to heavily mass-loaded winds. In this paper, we report a series of two-dimensional flux-limited diffusion radiation-hydrodynamics calculations performed with the code ORION in which we drive strong radiation fluxes through columns of dusty matter confined by gravity in order to answer these questions. We consider both systems where the radiation flux is sub-Eddington throughout the gas column, and those where it is super-Eddington at the midplane but sub-Eddington in the atmosphere. In the latter, we find that the radiation-matter interaction gives rise to radiation-driven Rayleigh-Taylor instability, which drives supersonic turbulence at a level sufficient to fully explain the turbulence seen in Galactic protocluster gas clouds, and to make a non-trivial contribution to the turbulence observed in starburst galaxy disks. However, the instability also produces a channel structure in which the radiation-matter interaction is reduced compared to time-steady analytic models because the radiation field is not fully trapped. For astrophysical parameters relevant to forming star clusters and starburst galaxies, we find that this effect reduces the net momentum deposition rate in the dusty gas by a factor of {approx}2-6 compared to simple analytic estimates, and that in steady state the Eddington ratio reaches unity and there are no strong winds. We provide an approximation formula, appropriate for implementation in analytic models and non-radiative simulations, for the force exerted by the infrared radiation field in this regime.

79 ASTRONOMY AND ASTROPHYSICS↗

Radiation belts of Jupiter

The results of a theoretical study of the radiation belts of Jupiter are presented. The model of the electron radiation belt is based on the assumption that electrons from the solar wind are transported into the region near Jupiter by radial diffusion. The diffusion is driven by electric fields caused by an upper atmospheric dynamo in Jupiter's ionosphere. A proton radiation belt at Jupiter is predicted.

Stansberry, K. G.↗

The Effect of Stochastic Acceleration on the Dynamics of Solar Energetic Particles in the Heliosphere

Solar Energetic Particles (SEPs) are crucial in space weather phenomena, impacting space-based technologies and human activities in space. Understanding the dynamics of SEPs, including their acceleration and transport mechanisms, is essential for improving predictive models and mitigating adverse effects. This study investigates the impact of stochastic acceleration (SA) on the dynamics of SEPs within the heliosphere. By integrating stochastic acceleration into a SEP transport model, we assess its impact relative to diffusive shock acceleration (DSA). The investigation utilizes the Adaptive Mesh Particle Simulator (AMPS) within the Space Weather Modeling Framework (SWMF) to simulate SEP dynamics, incorporating solar wind parameters and turbulence from the Alfven Wave Solar Model (AWSoM). To do this, we solve the focused transport equation to model the propagation of SEPs along magnetic field lines, extending these lines to 5 AU to incorporate the potential effects of pitch angle scattering beyond 1 AU. This aspect could notably impact the decay phase of a SEP event. Modeling the transport of SEPs is coupled with the simulation of solar wind dynamics, the interplanetary magnetic field, and the characteristics of Alfven wave turbulence. This presentation covers the modeling approach used in this research, the characterization of the impact of the stochastic acceleration, and the role of pitch angle scattering at various heliocentric distances on the dynamics of the SEP events' decay phase.

SEP↗

Particle energization during solar maximum: Diffusive shock acceleration at multiple shocks

We present a model for the acceleration of particles at multiple shocks using an approach related to box models. A distribution of particles is diffusively accelerated inside the box while simultaneously experiencing decompression through adiabatic expansion and losses from the convection and diffusion of particles out of the box by either the method used in Melrose and Pope and Pope and Melrose or by the approach introduced in Zank et al. where we solve the transport equation by a method analogous to operator splitting. The second method incorporates the additional loss terms of convection and diffusion and allows for the use of a variable time between shocks. We use a maximum injection energy (E{sub max}) appropriate for quasi-parallel and quasi-perpendicular shocks. We provide a preliminary application of the diffusive acceleration of particles by multiple shocks with frequencies appropriate for solar maximum.

79 ASTRONOMY AND ASTROPHYSICS↗

Depletion of solar wind plasma near a planetary boundary

A mathematical model is presented that describes the squeezing of solar wind plasma out along interplanetary magnetic field lines in the region between the bow shock and the effective planetary boundary (in the case of the earth, the magnetopause). In the absence of local magnetic merging the squeezing process should create a 'depletion layer', a region of very low plasma density just outside the magnetopause. Numerical solutions are obtained for the dimensionless magnetohydrodynamic equations describing this depletion process for the case where the solar wind magnetic field is perpendicular to the solar wind flow direction. For the case of the earth, the theory predicts that the density should be reduced by a factor exceeding 2 in a layer about 700-1300 km thick if the Alfven Mach number in the solar wind, is equal to 8. Scaling of the model calculations to Venus and Mars suggests layer thicknesses about 1/10 and 1/15 those of the earth, respectively, neglecting diffusion and ionospheric effects.

Zwan, B. J.↗

A numerical model of gravity wave breaking and stress in the mesosphere

The goal of the study is to calculate numerically the deceleration and heating caused by breaking gravity waves. The effect of the radiative dissipation of the wave is included as vertical-wavelength-dependent Newtonian cooling. The parameterization for zonal deceleration is extended by breaking gravity waves (Lindzen, 1981) to include the turbulent diffusion of heat and momentum. After describing the numerical model, the numerical results are presented and compared with the parameterizations in a noninteractive model of the mean zonal wind. Attention is then given to the transport of constituents by gravity waves and the attendant turbulent zone. It is noted that if gravity wave breaking were not an intermittent process, gravity wave stresses would produce an adiabatic mesosphere with a zonal mean velocity close to the phase speed of the breaking wave.

Schoeberl, M. R.↗

Cosmic-ray-modified stellar winds. II - A perturbation approach

A perturbation method is developed to describe the modification of a stellar wind flow with termination shock by the Galactic cosmic rays. The perturbation parameter epsilon used in the analysis is the ratio of the galactic cosmic-ray pressure to the thermal gas pressure at a large distance from the star. The positive galactic cosmic-ray pressure gradient serves to brake the outflowing stellar wind gas, particularly just upstream of the termination shock of the wind. A one-fluid polytropic model is used to describe the thermal stellar wind gas, with the coupling between the cosmic rays and the thermal gas being determined by an average hydrodynamical diffusion coefficient kappa describing the scattering of cosmic rays by magnetohydrodynamic waves traveling in the background flow. The analysis takes into account cosmic-ray modifications of the critical point of the wind, the thermal gas entropy constants on both sides of the shock, and the fluid velocity profile.

Ko, C. M.↗

Two-stream modeling of plasmaspheric refilling

Plasmaspheric refilling on an L = 4 flux tube was studied by using a time-dependent, hydrodynamic plasmaspheric flow model in which the ion streams from the two hemispheres are treated as distinct fluids. In the model the continuity, momentum, and energy equations of a two-ion (O(+) and H(+)), quasi-neutral, currentless plasma are solved along a closed geomagnetic field line; diffusive equilibrium is not assumed. collisions between all stream pairs and with neutral species are included. The model includes a corotating, tilted dipole magnetic field and neutral winds. Ionospheric sources and sinks are accounted for in a self-consistent manner. Electrons are assumed to be heated by photoelectrons. The model flux tube extends from a 200-km altitude in one hemisphere to a 200-km altitude in the other hemisphere. Initially, the upwelling streams pass through each other practically unimpeded. When the streams approach the boundary in the conjugate ionosphere, a shock develops there, which moves upward and dissipates slowly; at about the same time a reverse shock develops in the hemisphere of origin, which moves upward. After about 1 hour, large shocks develop in each stream near the equator; these shocks move toward the equator and downward after crossing the equator. However, these shocks are probably artificial, because counterstreaming flows occur in each H(+) fluid, which the model can only handle by creating shocks.

Guiter, S. M.↗

Developments and Validations of Fully Coupled CFD and Practical Vortex Transport Method for High-Fidelity Wake Modeling in Fixed and Rotary Wing Applications

A novel Computational Fluid Dynamics (CFD) coupling framework using a conventional Reynolds-Averaged Navier-Stokes (BANS) solver to resolve the near-body flow field and a Particle-based Vorticity Transport Method (PVTM) to predict the evolution of the far field wake is developed, refined, and evaluated for fixed and rotary wing cases. For the rotary wing case, the RANS/PVTM modules are loosely coupled to a Computational Structural Dynamics (CSD) module that provides blade motion and vehicle trim information. The PVTM module is refined by the addition of vortex diffusion, stretching, and reorientation models as well as an efficient memory model. Results from the coupled framework are compared with several experimental data sets (a fixed-wing wind tunnel test and a rotary-wing hover test).

Anusonti-Inthra, Phuriwat↗

Test-Anchored Vibration Response Predictions for an Acoustically Energized Curved Orthogrid Panel with Mounted Components

rich body of vibroacoustic test data was recently generated at Marshall Space Flight Center for component-loaded curved orthogrid panels typical of launch vehicle skin structures. The test data were used to anchor computational predictions of a variety of spatially distributed responses including acceleration, strain and component interface force. Transfer functions relating the responses to the input pressure field were generated from finite element based modal solutions and test-derived damping estimates. A diffuse acoustic field model was applied to correlate the measured input sound pressures across the energized panel. This application quantifies the ability to quickly and accurately predict a variety of responses to acoustically energized skin panels with mounted components. Favorable comparisons between the measured and predicted responses were established. The validated models were used to examine vibration response sensitivities to relevant modeling parameters such as pressure patch density, mesh density, weight of the mounted component and model form. Convergence metrics include spectral densities and cumulative root-mean squared (RMS) functions for acceleration, velocity, displacement, strain and interface force. Minimum frequencies for response convergence were established as well as recommendations for modeling techniques, particularly in the early stages of a component design when accurate structural vibration requirements are needed relatively quickly. The results were compared with long-established guidelines for modeling accuracy of component-loaded panels. A theoretical basis for the Response/Pressure Transfer Function (RPTF) approach provides insight into trends observed in the response predictions and confirmed in the test data. The software developed for the RPTF method allows easy replacement of the diffuse acoustic field with other pressure fields such as a turbulent boundary layer (TBL) model suitable for vehicle ascent. Structural responses using a TBL model were demonstrated, and wind tunnel tests have been proposed to anchor the predictions and provide new insight into modeling approaches for this environment. Finally, design load factors were developed from the measured and predicted responses and compared with those derived from traditional techniques such as historical Mass Acceleration Curves and Barrett scaling methods for acreage and component-loaded panels.

Frady, Gregory P.↗

Harnessing stratospheric diffusion barriers for enhanced climate geoengineering

Stratospheric sulfate aerosol geoengineering is a proposed method to temporarily intervene in the climate system to increase the reflectance of shortwave radiation and reduce mean global temperature. In previous climate modeling studies, choosing injection locations for geoengineering aerosols has, thus far, only utilized the average dynamics of stratospheric wind fields instead of accounting for the essential role of time-varying material transport barriers in turbulent atmospheric flows. Here we conduct the first analysis of sulfate aerosol dispersion in the stratosphere, comparing what is now a standard fixed-injection scheme with time-varying injection locations that harness short-term stratospheric diffusion barriers. We show how diffusive transport barriers can quickly be identified, and we provide an automated injection location selection algorithm using short forecast and reanalysis data. Within the first 7 d days of transport, the dynamics-based approach is able to produce particle distributions with greater global coverage than fixed-site methods with fewer injections. Additionally, this enhanced dispersion slows aerosol microphysical growth and can reduce the effective radii of aerosols up to 200–300 d after injection. While the long-term dynamics of aerosol dispersion are accurately predicted with transport barriers calculated from short forecasts, the long-term influence on radiative forcing is more difficult to predict and warrants deeper investigation. Statistically significant changes in radiative forcing at timescales beyond the forecasting window showed mixed results, potentially increasing or decreasing forcing after 1 year when compared to fixed injections. We conclude that future feasibility studies of geoengineering should consider the cooling benefits possible by strategically injecting sulfate aerosols at optimized time-varying locations. Our method of utilizing time-varying attracting and repelling structures shows great promise for identifying optimal dispersion locations, and radiative forcing impacts can be improved by considering additional meteorological variables.

54 ENVIRONMENTAL SCIENCES↗

PROTON HEATING BY NONLINEAR FIELD-ALIGNED ALFVEN WAVES IN SOLAR CORONAL HOLES

Field-aligned Alfven waves are often viewed as a source of the proton heating that accelerates the fast solar wind. However, the energy that they can inject into the protons in the limit of cyclotron-resonant quasi-linear diffusion is insufficient to account for the observed acceleration. To test the validity of this limit in coronal holes, nonlinear Alfven waves are modeled using a hybrid code. It is found that the nonlinearity is particularly strong when the intensity of antisunward-propagating waves is comparable to that of sunward waves. The sunward waves can be generated by the proton distribution as it evolves with the heliocentric distance. The ponderomotive force and beat interaction are identified as the most important nonlinear effects. The nonlinearity of the field-aligned Alfven waves produces density fluctuations. In the simulations, the amplitude of the density fluctuations was kept within the observed constraints from the interplanetary scintillation measurements in the corona. In this case, the characteristic time of the proton heating is almost 2 orders of magnitude smaller than the solar wind expansion time. Therefore, it can contribute to the energization of the solar wind on the global scale. The nonlinear wave damping operating alone cannot be responsible for the energization because it only causes particle diffusion parallel to the magnetic field. However, it can relax the limitation on the perpendicular diffusion imposed by the cyclotron resonance condition. The nonlinear damping combined with the linear one can then inject the additional thermal energy needed to accelerate the solar wind.

99 GENERAL AND MISCELLANEOUS↗

Energy diffusion of pickup ions upstream of comets

A steady state model of pickup ion energization upstream of a cometary bow wave is presented in order to investigate the effects of quasi-linear energy diffusion in the turbulence there. The model assumes that the ions are immediately isotropized at pickup, and it includes the effects of adiabatic acceleration in the slowing solar wind and of continual pickup of ions as the comet is approached. By taking all physical quantities to fall off as power laws with distance from the comet, an analytical expression is obtained for the distribution function of pickup ions in the reference frame moving with the solar wind. To illustrate the application of this model, the model results are compared to the observations of pickup ions at comet Giacobini-Zinner. At present, this is the only cometary encounter for which sufficient quantitative information is available. The model does not compare well with these observations, but it is not clear whether the differences are due to artificial problems in the model or the data analysis or to the action of other energization processes at this comet. Preliminary results from the Halley encounters appear to agree more closely with this model.

Isenberg, Philip A.↗

Thermal Remote Anemometer Device

Thermal Remote Anemometer Device developed for remote, noncontacting, passive measurement of thermal properties of sample. Model heated locally by scanning laser beam and cooled by wind in tunnel. Thermal image of model analyzed to deduce pattern of airflow around model. For materials applications, system used for evaluation of thin films and determination of thermal diffusivity and adhesive-layer contact. For medical applications, measures perfusion through skin to characterize blood flow and used to determine viabilities of grafts and to characterize tissues.

Heyman, Joseph S.↗

Preliminary Evaluation of the Simplified Higher Order Closure (SHOC) in the NASA Goddard Earth Observing System (GEOS)

Here we evaluate alternative planetary boundary layer (PBL) schemes in the NASA Goddard Earth Observing System (GEOS) model. The model currently calculates turbulent diffusivities with a local Richardson number-based scheme for stable layers, and a K-profile scheme with surface- and cloud-driven plumes based on Lock et al. (2000) for unstable layers. In this study, these are replaced with the TKE-based Simplified Higher Order Closure (SHOC). SHOC combines a 1.5-order turbulence closure with a double-Gaussian PDF serving as a subgrid condensation scheme. The new diffusivity calculations are paired with two new shallow mass flux schemes. First, the University of Washington shallow cumulus scheme of Park and Bretherton (2009), a buoyancy-sorting entraining-detraining bulk plume with overshooting entrainment and a TKE/CIN-based closure. Second, an Eddy Diffusivity Mass Flux (EDMF) scheme based on the multiple plume model of Suselj et al. (2013) with stochastic lateral entrainment. Global climatologies of low level temperature, humidity, and wind are evaluated against MERRA-2 and ERA-Interim reanalyses, and significant reductions in bias are seen with both mass flux schemes. The diurnal cycle over the continental United States is evaluated using MERRA-2 and an in situ network of surface Lidar profilers.

Arnold, Nathan↗

Solar Wind Implantation Into the Lunar Regolith: Monte Carlo Simulations of H Retention in a Surface With Defects and the H2 Exosphere

The solar wind implants protons into the top 20–30 nm of lunar regolith grains, and the implanted hydrogen will diffuse out of the regolith but also interact with oxygen in the regolith oxides. We apply a statistical approach to estimate the diffusion of hydrogen in the regolith hindered by forming temporary bonds with regolith oxygen atoms. A Monte Carlo simulation was used to track the temporal evolution of bound OH surface content and the H2 exosphere. The model results are consistent with the interpretation of the Chandrayaan‐1 M3 observations of infrared absorption spectra by surface hydroxyls as discussed in Li and Milliken (2017, https://doi.org/10.1126/sciadv.1701471). The model reproduced the latitudinal concentration of OH by using a Gaussian energy distribution of f(U(sub 0) = 0.5 eV, U(sub W) = 0.078–0.1 eV) to characterize the activation energy barrier to the diffusion of hydrogen in space weathered regolith. In addition, the model results of the exospheric content of H2 are consistent with observations by the Lyman Alpha Mapping Project on the Lunar Reconnaissance Orbiter. Therefore, we provide support for hydroxyl formation by chemically trapped solar wind protons.

Tucker, O. J.↗

Solar Wind Implantation Into the Lunar Regolith: Monte Carlo Simulations of H Retention in a Surface With Defects and the H2 Exosphere

The solar wind implants protons into the top 20–30 nm of lunar regolith grains, and the implanted hydrogen will diffuse out of the regolith but also interact with oxygen in the regolith oxides. We apply a statistical approach to estimate the diffusion of hydrogen in the regolith hindered by forming temporary bonds with regolith oxygen atoms. A Monte Carlo simulation was used to track the temporal evolution of bound OH surface content and the H2 exosphere. The model results are consistent with the interpretation of the Chandrayaan-1 M3 observations of infrared absorption spectra by surface hydroxyls as discussed in Li and Milliken (2017). Themodel reproduced the latitudinal concentration of OH by using a Gaussian energy distribution of f(U(o) = 0.5eV, U(w) = 0.078 – 0.1 eV) to characterize the activation energy barrier to the diffusion of hydrogen in space weathered regolith. In addition, the model results of the exospheric content of H2 are consistent with observations by the Lyman Alpha Mapping Project on the Lunar Reconnaissance Orbiter. Therefore, we provide support for hydroxyl formation by chemically trapped solar wind protons.

O. J. Tucker↗

Solar Wind Implantation Into the Lunar Regolith: Monte Carlo Simulations of H Retention in a Surface With Defects and the H2 Exosphere

The solar wind implants protons into the top 20–30 nm of lunar regolith grains, and the implanted hydrogen will diffuse out of the regolith but also interact with oxygen in the regolith oxides. We apply a statistical approach to estimate the diffusion of hydrogen in the regolith hindered by forming temporary bonds with regolith oxygen atoms. A Monte Carlo simulation was used to track the temporal evolution of bound OH surface content and the H2 exosphere. The model results are consistent with the interpretation of the Chandrayaan‐1 M3 observations of infrared absorption spectra by surface hydroxyls as discussed in Li and Milliken (2017, https://doi.org/10.1126/sciadv.1701471). The model reproduced the latitudinal concentration of OH by using a Gaussian energy distribution of f(U0 = 0.5 eV, UW = 0.078–0.1 eV) to characterize the activation energy barrier to the diffusion of hydrogen in space weathered regolith. In addition, the model results of the exospheric content of H2 are consistent with observations by the Lyman Alpha Mapping Project on the Lunar Reconnaissance Orbiter. Therefore, we provide support for hydroxyl formation by chemically trapped solar wind protons.

O J Tucker↗