Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WEATHERIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

The effects of terrestrial weathering on samarium-neodymium isotopic composition of ordinary chondrites

Following their fall to Earth, meteorites experience weathering. In this systematic study, we evaluate the trace element composition of ordinary chondrites from the Antarctic cold desert, and Atacama (Chile) and Lut (Iran) hot deserts, with an emphasis on rare earth elements (REE). Our data confirms that terrestrial weathering of meteorites in hot deserts changes their trace element (Sr, Ba, REE, Hf, Th, and U) concentrations. However, weathering effects in majority of Antarctic samples are limited to slight Ba, REE, Hf, and Th depletions and in some case to U enrichment. In comparison to the Antarctic meteorites, hot desert samples show greater disturbances and REE fractionation relative to the average fall values. We measured the Sm-Nd isotopic composition of the hot desert meteorites that have heavily affected REE compositions. Our Sm-Nd isotopic data show a significant effect of terrestrial weathering evidenced by non-CHUR (147)Sm/(144)Nd and (143)Nd/(144)Nd ratios. Measurements show a higher variation and lower values of (147)Sm/(144)Nd for the Atacama samples than those from the Lut Desert. Deviations from CHUR (147)Sm/(144)Nd value are in positive accordance with the degree of La/Lu fractionation caused by weathering. The ɛNd values of Atacama and Lut deserts meteorites range from −2.20 to +1.61, which is wider than the −1.07 to +0.64 range for falls. We suggest that disturbance of primary Sm/Nd ratios resulting from mixing with terrestrial components originating from soil during weathering is responsible for lower (147)Sm/(144)Nd ratio in these meteorites. The majority of the Atacama meteorites regardless of their weathering degrees have their REE compositions and ɛNd affected by terrestrial contamination. Both (147)Sm/(144)Nd ratio and ɛNd values show no straightforward relationship with weathering degree. However, in both cases the samples with the highest negative isotopic disturbances are H chondrites from the Atacama and Lut deserts. In addition, Ba concentration shows a negative correlation with (147)Sm/(144)Nd ratio. Care must be taken into account while dealing with samples collected from hot deserts, even fresh-looking ones.

Isotope geochemistry↗

NASA/GEWEX SRB Surface Radiation Budget Fluxes Through the Prism of Weather States

The NASA/GEWEX Surface Radiation Budget Version 4 (SRB Rel4) product is now publicly available, covering the period from July 1983 through June 2017. This supersedes the SRB Rel3 (Stackhouse et al., 2011) product which has been used in the community for a wide variety of applications, including climate model validation, agriculture, solar energy, and architecture. SRB Rel4 uses the newly recalibrated and processed ISCCP HXS product as its primary input for cloud and radiance data, replacing ISCCP DX with a ninefold increase in pixel count (10km instead of 30km). This version retains a 1°x1° resolution but benefits from a much larger number of samples per grid box than the SRB Rel3. ISCCP also provides an atmospheric temperature and moisture dataset known as nnHIRS which we use here, along with Seaflux and Landflux surface and near-surface meteorological parameters. Rel4 incorporates several important algorithm improvements. These include recalculated shortwave (SW) atmospheric transmissivities and reflectivities yielding a somewhat less transmissive atmosphere. Both shortwave and longwave (LW) now also include variable aerosol composition and radiative properties, allowing for the use of a detailed aerosol history from the Max Planck Institute Aerosol Climatology (MACv1). LW and SW algorithms now produce pristine sky fluxes, allowing the aerosol flux effects to be quantified. For SW, ocean albedo and snow/ice albedo are improved from Release 3. Total solar irradiance is now variable, and reduced to an average of 1361 Wm-2. The radiative treatment of ice cloud is improved. For the LW, a climatological monthly varying spectral surface emissivity is added. Here we evaluate the SRB Rel4 top of atmosphere (TOA) and surface fluxes in the context of weather states and oceanic regions. Weather states (Tselioudis et al., 2013, Tselioudis et al., 2021) are defined by K-means clustering 2-D histograms of satellite-retrieved cloud optical depths and cloud top pressures. The most recent (Tselioudis et al., 2021) weather states derived from the International Satellite Cloud Climatology Project (ISCCP) H-series data results in eight cloud weather states and one clear sky weather state, for a total of nine weather states. We examine the statistics of SRB Rel4 fluxes for each weather state and a variety of relevant land and ocean regions. We compare to similar analyses performed on CERES EBAF and SYN1Deg flux products, and validate against Baseline Surface Radiometer Network (BSRN) land stations and Pacific Marine Environmental Laboratory (PMEL) ocean buoy data. It is demonstrated that the weather state concept is valuable when examining the comparative strengths and weaknesses of satellite radiative flux algorithms.

Atmospheric Radiation↗

Investigating Space Weathering of Ryugu Grains Using Electron Microscopy and X-Ray Computed Tomography

The effects of micrometeorite bombardment and solar wind ion irradiation – collectively known as space weathering – alter the microstructural, chemical, and spectral properties of airless surfaces. Characteristics of space weathering include vesiculated textures, amorphous grain rims (upper ~100 nm), and the production of Fe-bearing nanoparticles (npFe). The resulting modifications in the optical properties of the surface regolith include changes in spectral slope and overall reflectance of the surfaces as well as the attenuation of their characteristic absorption bands across VIS-NIR wavelengths. As the surface is continuously exposed to interplanetary space over time, the accrual of these features complicates the interpretation of remote sensing spectral data and the characterization of returned samples. Laboratory experiments that simulate solar wind irradiation and micrometeoroid impacts using carbonaceous analogs have revealed novel and complex microstructural and chemical changes, including the decrease in organic species concentrations and the reduction of Fe 3+ . In 2020, the Japan Aerospace Exploration Agency (JAXA)’s Hayabusa2 mission returned over 5 g of regolith particles from near- Earth C-type asteroid (162173) Ryugu – a unique opportunity to study space weathering on carbonaceous materials. Initial studies have established that the surface morphology and chemical signatures of space weathering in returned samples share characteristics with laser irradiation experiments simulating micrometeoroid bombardment, indicating that impacts are a significant space weathering mechanism operating on Ryugu. Here, we seek to improve our understanding of space weathering of carbonaceous asteroidal regolith grains by characterizing its effects directly on returned samples to determine the nature of space weathering on Ryugu. To do so, we performed coordinated analyses using electron beam techniques and X-ray computed tomography (XCT) to examine the effects of space weathering on grains returned from the surface of Ryugu by the Hayabusa2 mission.

L. E. Melendez↗

Advanced Weather Hazard Perception Capabilities for Remotely Piloted Aircraft in Wildland Fire Operations

Weather, specifically winds, are the most variable and least predictable of the weather-related elements that affect wildfire behavior.1 This leads to aviation operations which must deal with increased risks due to dynamic weather factors. Remotely piloted aircraft provide the opportunity to remove human loss of life from these risk consequences and mitigate the overall risks for air operations for fire suppression and dropping of retardant. UAS also allows the opportunity to continue fire suppression with nighttime operations. However, with the use of new technologies in aviation operations comes additional risk factors and the need for remote sensing capabilities to identify and permit navigation around extreme weather conditions, with turbulence being the most unforeseeable. This paper presents advanced concepts for weather hazard perception capabilities for remote pilot operators to include data and display techniques intended for dynamic environments and low altitude operations. This work can support the potential of weather sensing capabilities to create hazard maps to track high-risk weather patterns in mountainous regions. Advanced sensing may provide opportunity to locate extreme turbulence hazards for uninhabited aerial systems (UAS) and decrease the likelihood of flying into unknown weather conditions to enable safe operations to assist in wildfire air support.

Tyler L Willhite↗

The Nature of Space Weathering in Samples From Asteroid (162173) Ryugu Revealed By Coordinated Analysis

Space weathering, driven primarily by micrometeorite bombardment and solar wind ion irradiation, alters the morphology, microstructure, and chemistry of the surface regolith on airless bodies. The accumulation of microstructural and chemical space weathering features, including melt deposits, amorphous rims, and nanophase iron-bearing particles (npFe), are associated with alterations of the spectral properties of the regolith. In particular, space weathering changes the spectral slope and reflectance of surface materials, and causes the attenuation of characteristic absorption bands in the visible to near-infrared wave-lengths, as well as a shift towards longer wavelengths of the Christiansen feature (CF)in thermal infrared spectra. Previous studies of space weathering characteristics have focused on siliceous bodies like the Moon and S-type asteroid Itokawa. However, observations of asteroid Ryugu by the JAXA Hayabusa2 spacecraft and subsequent analyses of returned samples revealed carbonaceous and hydrated materials. These samples provided our first opportunity to constrain the effects of space weathering processes on primitive, C-type asteroids. Analyses of returned samples to understand the space weathering of carbonaceous materials are important for accurately interpreting remote sensing observations of carbonaceous asteroids. In addition, the analysis of Hayabusa2 samples from Ryugu paved the way for the analysis of samples from the asteroid Bennu, re-turned by the NASA OSIRIS-REx mission. As space weathering impacts the microstructure, chemistry, and spectral characteristics of asteroidal surfaces, here we report the results of a coordinated analytical study of the micro-and nano-scale signatures of space weathering in samples returned from Ryugu.

L E Melendez↗

Weatherization Innovation Pilot Program (WIPP): Technical Assistance Summary

The U.S. Department of Energy (DOE) Energy Efficiency and Renewable Energy (EERE) Weatherization and Intergovernmental Programs Office (WIPO) launched the Weatherization Innovation Pilot Program (WIPP) to accelerate innovations in whole-house weatherization and advance DOE's goal of increasing the energy efficiency and health and safety of low-income residences without the utilization of additional taxpayer funding. Sixteen WIPP grantees were awarded a total of $30 million in Weatherization Assistance Program (WAP) funds in September 2010. These projects focused on: including nontraditional partners in weatherization service delivery; leveraging significant non-federal funding; and improving the effectiveness of low-income weatherization through the use of new materials, technologies, behavior-change models, and processes.

33 ADVANCED PROPULSION SYSTEMS↗

Effects of Natural and Artificial Weathering on the Physical Properties of Recycled Poly(ethylene terephthalate)

In accelerated weathering tests, specimens are exposed to higher radiation intensity, temperature and humidity than is likely under natural weathering in order to achieve rapid degradation of the polymer in a convenient short time. In the current work, a correlation between the two environments is attempted so that a prediction of lifetimes in the natural environment can be achieved. During aging, surface flaws are created due to the chain scission process. This is initiated by the absorption of ultra-violet light and directly affects visual appearance and impact strength. After natural weathering, the material shows only plastic deformation in an impact test. However, after artificial weathering to 5000 h of UV exposure, there is a decrease of 85% in impact strength. Colour change occurs at a high rate in the early stages of UV exposure. Beyond 2000 h of exposure, the colour change approaches a steady state and a correlation between the changes under natural and artificial weathering becomes apparent for a potential prediction of lifetimes. From the analysis including the specular component (SCI), taking surface roughening into account, 1 year under natural weathering was found to be equivalent to 25 days under accelerated weathering.

36 MATERIALS SCIENCE↗

A general spatial-temporal framework for short-term building temperature forecasting at arbitrary locations with crowdsourcing weather data

Weather forecasting has been a critical component to predict and control building energy consumption for better building energy management. Without accessibility to other data sources, the onsite observed temperatures or the airport temperatures are used in forecast models. In this paper, we present a novel approach by utilizing the crowdsourcing weather data from neighboring personal weather stations (PWS) to improve the weather forecast accuracy around buildings using a general spatial-temporal modeling framework. The final forecast is based on the ensemble of local forecasts for the target location using neighboring PWSs. Our approach is distinguished from existing literature in various aspects. First, we leverage the crowdsourcing weather data from PWS in addition to public data sources. In this way, the data is at much finer time resolution (e.g., at 5-minute frequency) and spatial resolution (e.g., arbitrary location vs grid). Second, our proposed model incorporates spatial-temporal correlation information of weather variables between the target building and a set of neighboring PWSs so that underlying correlations can be effectively captured to improve forecasting performance. Here, we demonstrate the performance of the proposed framework by comparing to the benchmark models on temperature forecasting for a building located at an arbitrary location at San Antonio, Texas, USA. In general, the proposed model framework equipped with machine learning technique such as Random Forest can improve forecasting by 50% compares with persistent model and has 90% chance to outperform airport forecast in short-term forecasting. In a real-time setting, the proposed model framework can provide more accurate temperature forecasting results compared with using airport temperature forecast for most forecast horizon. Moreover, we analyze the sensitivity of model parameters to gain insights on how crowdsourcing data from the neighboring personal weather stations impacts forecasting performance. Finally, we implement our model in other cities such as Syracuse and Chicago to test the model's performance in different landforms and climate types.

54 ENVIRONMENTAL SCIENCES↗

Comparison of typical year and multiyear building simulations using a 55-year actual weather data set from China

Weather has significant impacts on the thermal environment and energy use in buildings. Thus, accurate weather data are crucial for building performance evaluations. Traditionally, typical year data inputs are used to represent long-term weather data. However, there is no guarantee that a single year represents the changing climate well. In this study, the long-term representation of a typical year was assessed by comparing it to a 55-year actual weather data set. To investigate the weather impact on building energy use, 559 simulation runs of a prototype office building were performed for 10 large cities covering all climate zones in China. The analysis results demonstrated that the weather data varied significantly from year to year. Hence, a typical year cannot reflect the variation range of weather fluctuations. Typical year simulations overestimated or underestimated the energy use and peak load in many cases. With the increase in computational power of personal computers, it is feasible and essential to adopt multiyear simulations for full assessments of long-term building performance, as this will improve decision-making by allowing for the full consideration of variations in building energy use.

54 ENVIRONMENTAL SCIENCES↗

Survey and Analysis of Weather Data for Building Energy Simulations

In recent years, calibrated energy modeling of residential and commercial buildings has gained importance in a retrofit-dominated market. Accurate weather data plays an important role in this calibration process and projected energy savings. It would be ideal to measure weather data at the building location to capture relevant microclimate variation but this is generally considered cost-prohibitive. There are data sources publicly available with high temporal sampling rates but at relatively poor geospatial sampling locations. To overcome this limitation, there are a growing number of service providers that claim to provide real time and historical weather data for 20-35 km2 grid across the globe. Unfortunately, there is limited documentation from 3rd-party sources attesting to the accuracy of this data. This paper compares provided weather characteristics with data collected from a weather station inaccessible to the service providers. Monthly average dry bulb temperature; relative humidity; direct, diffuse and horizontal solar radiation; and wind speed are statistically compared. Moreover, we ascertain the relative contributions of each weather variable and its impact on building loads. Annual simulations are calculated for three different building types, including a closely monitored and automated energy efficient research building. The comparison shows that the difference for an individual variable can be as high as 90%. In addition, annual building energy consumption can vary by 7% while monthly building loads can vary by 40% as a function of the provided location s weather data.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Neutron radiography and X-ray computed tomography for quantifying weathering and water uptake processes inside porous limestone used as building material

Euville and Savonnières limestones were weathered by acid test and this resulted in the formation of a gypsum crust. In order to characterize the crystallization pattern and the evolution of the pore structure below the crust, a combination of high resolution X-ray computed tomography and SEM–EDS was used. A time lapse sequence of the changing pore structure in both stones was obtained and afterwards quantified by using image analysis. The difference in weathering of both stones by the same process could be explained by the underlying microstructure and texture. Because water and moisture play a crucial role in the weathering processes, water uptake in weathered and non-weathered samples was characterized based on neutron radiography. In this way the water uptake was both visualized and quantified in function of the height of the sample and in function of time. In general, the formation of a gypsum crust on limestone slows down the initial water uptake in the materials. - Highlights: • Time lapse sequence in 3D of changing pore structures inside limestone • A combination of X-ray CT, SEM and neutron radiography was used. • Quantification of water content in function of time, height and weathering • Characterization of weathering processes due to gypsum crystallization.

36 MATERIALS SCIENCE↗

Localized Actual Meteorological Year File Creator (LAF): A tool for using locally observed weather data in building energy simulations

The Localized Actual Meteorological Year File Creator (LAF) application provides web-based access to real meteorological data and processes it into a weather file suitable for building energy modeling. Building energy consumption is affected by what is inside the building (such as occupants, appliances, HVAC systems, etc.) and by what is outside: the weather conditions the building is exposed to. However, freely available weather data files are limited to a number of specific locations, usually airports, which are often located away from city centers where buildings are concentrated. The authors have developed a new tool that supports the investigation and quantification of micro-climate conditions on building energy consumption. LAF is built on the Python open-source programming language and has a Graphical User Interface (GUI) that allows users to create custom weather data files for building energy simulations. Many sets of actual meteorological year weather data for long time periods are publicly available online (such as the MesoWest database) for thousands of locations in the US. LAF selects weather data according to user specifications and automatically processes it through an API across multiple weather stations and multiple time periods. The user may easily select a specific location, time frame, and time step that best meets their needs. This article presents a useful tool for energy modelers, building designers and operators to assist with building performance analysis and optimization.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Evolution of porosity and diffusivity associated with chemical weathering of a basalt clast

Weathering of rocks as a result of exposure to water and the atmosphere can cause significant changes in their chemistry and porosity. In low-porosity rocks, such as basalts, changes in porosity, resulting from chemical weathering, are likely to modify the rock's effective diffusivity and permeability, affecting the rate of solute transport and thus potentially the rate of overall weathering to the extent that transport is the rate limiting step. Changes in total porosity as a result of mineral dissolution and precipitation have typically been used to calculate effective diffusion coefficients through Archie's law for reactive transport simulations of chemical weathering, but this approach fails to account for unconnected porosity that does not contribute to transport. In this study, we combine synchrotron X-ray microcomputed tomography ({mu}CT) and laboratory and numerical diffusion experiments to examine changes in both total and effective porosity and effective diffusion coefficients across a weathering interface in a weathered basalt clast from Costa Rica. The {mu}CT data indicate that below a critical value of {approx}9%, the porosity is largely unconnected in the basalt clast. The {mu}CT data were further used to construct a numerical pore network model to determine upscaled, effective diffusivities as a function of total porosity (ranging from 3 to 30%) for comparison with diffusivities determined in laboratory tracer experiments. By using effective porosity as the scaling parameter and accounting for critical porosity, a model is developed that accurately predicts continuum-scale effective diffusivities across the weathering interface of the basalt clast.

54 ENVIRONMENTAL SCIENCES↗

INDICATION OF INSENSITIVITY OF PLANETARY WEATHERING BEHAVIOR AND HABITABLE ZONE TO SURFACE LAND FRACTION

It is likely that unambiguous habitable zone terrestrial planets of unknown water content will soon be discovered. Water content helps determine surface land fraction, which influences planetary weathering behavior. This is important because the silicate-weathering feedback determines the width of the habitable zone in space and time. Here a low-order model of weathering and climate, useful for gaining qualitative understanding, is developed to examine climate evolution for planets of various land-ocean fractions. It is pointed out that, if seafloor weathering does not depend directly on surface temperature, there can be no weathering-climate feedback on a waterworld. This would dramatically narrow the habitable zone of a waterworld. Results from our model indicate that weathering behavior does not depend strongly on land fraction for partially ocean-covered planets. This is powerful because it suggests that previous habitable zone theory is robust to changes in land fraction, as long as there is some land. Finally, a mechanism is proposed for a waterworld to prevent complete water loss during a moist greenhouse through rapid weathering of exposed continents. This process is named a 'waterworld self-arrest', and it implies that waterworlds can go through a moist greenhouse stage and end up as planets like Earth with partial ocean coverage. This work stresses the importance of surface and geologic effects, in addition to the usual incident stellar flux, for habitability.

79 ASTRONOMY AND ASTROPHYSICS↗

Mitigating Cascading Outages in Severe Weather Using Simulation-Based Optimization

Severe weather events can trigger cascading power outages and lead to significant losses. In this work, we investigate cascading outage mitigation under severe weather conditions. Given day-ahead weather forecasts and component failure models, we aim to identify a set of power lines that can be hardened to minimize the expected impact of potential cascading outages. Since the expected load shedding cannot be expressed as an explicit function of line hardening decisions and system states, we developed a cascading outage simulator to estimate the expected value of load shedding under various initial weather-related disruption scenarios generated using a weather forecast. To avoid massive enumeration of all possible combinations of line hardening decisions and reduce the simulation efforts, we employed an efficient simulation-based optimization approach that quickly identifies the (near) optimal line hardening decisions in the presence of both large simulation noises due to the highly variable initial disturbances and system states, and significant randomness in the subsequent cascades. Furthermore, the algorithm is also able to utilize parallel computing to dramatically reduce computation time to support decision making in preparation for severe weather conditions. We performed a case study on the Northeast Power Coordinating Council (NPCC) 140-bus system model to demonstrate that our approach can significantly improve power grid resilience to adverse weather events.

24 POWER TRANSMISSION AND DISTRIBUTION↗

How open data and interdisciplinary collaboration improve our understanding of space weather: A risk and resiliency perspective

Space weather refers to conditions around a star, like our Sun, and its interplanetary space that may affect space- and ground-based assets as well as human life. Space weather can manifest as many different phenomena, often simultaneously, and can create complex and sometimes dangerous conditions. The study of space weather is inherently trans-disciplinary, including subfields of solar, magnetospheric, ionospheric, and atmospheric research communities, but benefiting from collaborations with policymakers, industry, astrophysics, software engineering, and many more. Effective communication is required between scientists, the end-user community, and government organizations to ensure that we are prepared for any adverse space weather effects. With the rapid growth of the field in recent years, the upcoming Solar Cycle 25 maximum, and the evolution of research-ready technologies, we believe that space weather deserves a reexamination in terms of a “risk and resiliency” framework. By utilizing open data science, cross-disciplinary collaborations, information systems, and citizen science, we can forge stronger partnerships between science and industry and improve our readiness as a society to mitigate space weather impacts. The objective of this manuscript is to raise awareness of these concepts as we approach a solar maximum that coincides with an increasingly technology-dependent society, and introduce a unique way of approaching space weather through the lens of a risk and resiliency framework that can be used to further assess areas of improvement in the field.

79 ASTRONOMY AND ASTROPHYSICS↗

When Weather Matters: Science and Service to Meet Critical Societal Needs

The goal of weather prediction is to provide information people and organizations can use to reduce weather-related losses and enhance societal benefits, including protection of life and property, public health and safety, and support of economic prosperity and quality of life. In economic terms, the benefit of the investment in public weather forecasts and warnings is substantial: the estimated annualized benefit is about $31.5 billion, compared to the $5.1 billion cost of generating the information. Between 1980 and 2009, 96 weather disasters in the United States each caused at least $1 billion in damages, with total losses exceeding $700 billion. Between 1999 and 2008, there were an average of 629 direct weather fatalities per year. The annual impacts of adverse weather on the national highway system and roads are staggering: 1.5 million weather-related crashes with 7,400 deaths, more than 700,000 injuries, and $42 billion in economic losses.

Weather forecasting↗

Benefits Analysis of Multi-Center Dynamic Weather Routes

Dynamic weather routes are flight plan corrections that can provide airborne flights more than user-specified minutes of flying-time savings, compared to their current flight plan. These routes are computed from the aircraft's current location to a flight plan fix downstream (within a predefined limit region), while avoiding forecasted convective weather regions. The Dynamic Weather Routes automation has been continuously running with live air traffic data for a field evaluation at the American Airlines Integrated Operations Center in Fort Worth, TX since July 31, 2012, where flights within the Fort Worth Air Route Traffic Control Center are evaluated for time savings. This paper extends the methodology to all Centers in United States and presents benefits analysis of Dynamic Weather Routes automation, if it was implemented in multiple airspace Centers individually and concurrently. The current computation of dynamic weather routes requires a limit rectangle so that a downstream capture fix can be selected, preventing very large route changes spanning several Centers. In this paper, first, a method of computing a limit polygon (as opposed to a rectangle used for Fort Worth Center) is described for each of the 20 Centers in the National Airspace System. The Future ATM Concepts Evaluation Tool, a nationwide simulation and analysis tool, is used for this purpose. After a comparison of results with the Center-based Dynamic Weather Routes automation in Fort Worth Center, results are presented for 11 Centers in the contiguous United States. These Centers are generally most impacted by convective weather. A breakdown of individual Center and airline savings is presented and the results indicate an overall average savings of about 10 minutes of flying time are obtained per flight.

NAS based Benefits Analysis↗