SEARCH · Engineering Papers

Results for “Video camera”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Using airborne radiometry to determine atmospheric effects in Landsat data

An empirical method was developed to measure how solar and atmospheric conditions affect Landsat images by comparing Landsat MSS data with terrain reflectance. Terrain reflectance was measured with a four-channel radiometer designed to measure radiance in wavelength bands matched to the Landsat MSS data. Other instrumentation included a digital data logger, an irradiance meter, and a video camera with recorder. Reflectance of many terrain elements which could be registered to the Landsat digital data were measured from a low-flying aircraft. Correlations of reflectance with Landsat radiance verified a linear atmospheric model with an additive (path radiance) term and a multiplicative (transmittance) term. Coefficients from this model permit the extension of spectral signatures in computer-aided classification of Landsat images.

Dana, R. W.↗

NASA NTRS1981

Video framerate, resolution and grayscale tradeoffs for undersea telemanipulator

The product of Frame Rate (F) in frames per second, Resolution (R) in total pixels and grayscale in bits (G) equals the transmission band rate in bits per second. Thus for a fixed channel capacity there are tradeoffs between F, R and G in the actual sampling of the picture for a particular manual control task in the present case remote undersea manipulation. A manipulator was used in the MASTER/SLAVE mode to study these tradeoffs. Images were systematically degraded from 28 frames per second, 128 x 128 pixels and 16 levels (4 bits) grayscale, with various FRG combinations constructed from a real-time digitized (charge-injection) video camera. It was found that frame rate, resolution and grayscale could be independently reduced without preventing the operator from accomplishing his/her task. Threshold points were found beyond which degradation would prevent any successful performance. A general conclusion is that a well trained operator can perform familiar remote manipulator tasks with a considerably degrade picture, down to 50 K bits/ sec.

Ranadive, V.↗

NASA NTRS1983

Speckle imaging for planetary research

The present study of speckle imaging technique effectiveness encompasses image reconstruction by means of a division algorithm for Fourier amplitudes, and the Knox-Thompson (1974) algorithm for Fourier phases. Results which have been obtained for Io, Titan, Pallas, Jupiter and Uranus indicate that spatial resolutions lower than the seeing limit by a factor of four are obtainable for objects brighter than Uranus. The resolutions obtained are well above the diffraction limit, due to inadequacies of the video camera employed. A photon-counting camera has been developed to overcome these difficulties, making possible the diffraction-limited resolution of objects as faint as Charon.

Nisenson, P.↗

NASA NTRS1982

Air jet levitation furnace system for observing glass microspheres during heating and melting

A collimated hole structure air jet levitation system has been developed which can be used to levitate hollow glass microspheres used in inertial confinement fusion studies. An ellipsoidal furnace has been added to the system to provide a heating source. A video camera and a 16 mm movie camera connected to a microsphere system provide real time observation as well as permanent documentation of the experiments. Microspheres have been levitated at temperatures over 1400 C for over 10 minutes at a time.

Ethridge, E. C.↗

NASA NTRS1984

Amyloplast movement in living statocytes

Much evidence implicates amyloplast movement in plant graviperception. How this signal is transduced into a differential growth response is not known. Studies using fixed tissue are useful for deriving mean sedimentation rates, but cannot yield data on: the movement of individual amyloplasts, the role of cytoplasmic streaming, and the initial dynamic events occurring during the presentation time. These limitations were overcome by examining living tissue sections with a horizontally mounted microscope connected to a video camera and recorder. The kinetics of the early response to reorientation are consistent with the hypothesis that amyloplasts act by contact with a sensitive surface near the lower wall and indicate that cytoplasmic streaming provides an important vector in amyloplast redistribution in response to gravity.

Leopold, A. C.↗

NASA NTRS1984

Automatic holographic droplet analysis for liquid fuel sprays

The basic scheme for automated holographic analysis involves an optical system for reconstruction of the three dimensional real image of the droplet field, a spatial scanning system to transport a digitizing X-y image sensor through the real image, and processing algorithms for droplet recognition which establish the droplet sizes and positions. The hardware for system demonstrated includes the expanded and collimated beam from a 5 mW helium-neon laser for hologram reconstruction, an imaging lens for magnification of the real image field, and a video camera and digitizer providing 512-by-512 pixel resolution with 8-bit digitization. A mechanical stage is used to scan the hologram in three dimensional space, maintaining constant image magnification. A test droplet hologram is used for development and testing of the image processing algorithms.

Stanton, A. C.↗

NASA NTRS1986

Robotic Vision for Welding

Vision system for robotic welder looks at weld along axis of welding electrode. Gives robot view of most of weld area, including yet-unwelded joint, weld pool, and completed weld bead. Protected within welding-torch body, lens and fiber bundle give robot closeup view of weld in progress. Relayed to video camera on robot manipulator frame, weld image provides data for automatic control of robot motion and welding parameters.

Richardson, R. W.↗

NASA NTRS1985

Model deformation measurements at a cryogenic wind tunnel using photogrammetry

A photogrammetric closed circuit television system to measure model deformation at the National Transonic Facility (NTF) is described. The photogrammetric approach was chosen because of its inherent rapid data recording of the entire object field. Video cameras are used to acquire data instead of film cameras due to the inaccessibility of cameras which must be housed within the cryogenic, high pressure plenum of this facility. Data reduction procedures and the results of tunnel tests at the NTF are presented.

Burner, A. W.↗

NASA NTRS1986

Behavior of a non-wetting melt in free fall - Experimental

To explain why nonwetting metals and semiconductors, directionally solidified in space, yield ingots which are smaller in diameter than the ampoule, the behavior of mercury during a parabolic free-fall in a KC135 aircraft was observed using transparent ampoules with attached video cameras. Triangular glass ampoules and cylindrical polycarbonate ampoules were filled to 30-95 percent capacity. In polycarbonate ampoules, mercury did not pull away from the ampoule walls. The photographs displayed either liquid columns separated by gas spaces or gas bubbles on the wall. At low levels of liquid, separated columns were favored, while only bubbles were seen when the liquid mercury almost filled the ampoule. In ampoules with triangular cross section, the liquid pulled away from the glass walls along the edges and contacted the walls along the centers, over about half of the wall width of each side.

Sen, R.↗

NASA NTRS1987

Side-Looking Viewer for Crevices

Side-looking optical viewer inserted into gap 1 mm wide to depth of 10 cm. Instrument allows human observer to inspect small crevices from comfortable viewing angle. Small mirror atop pair of thin, flat legs inserted into gap. Mirror reflects image of gap wall or other object into microscope, which magnifies image 20 times. Quartz/halogen lamp in separate unit provides light to illuminate gap via optical-fiber bundle. Observer looks directly through microscope or attaches photographic or video camera without disturbing setup.

Hagen, G. R.↗

NASA NTRS1986

Oceanographic measurement capabilities of the NASA P-3 aircraft

Instrumentation on NASA P3 aircraft available to provide ground truth for ERS-1 is described. The wave sensors include the 36 GHz Surface Contour Radar (SCR), the Ku-band Radar Ocean Wave Spectrometer (ROWS), and the Airborne Oceanographic Lidar. The other sensors include a C-band scatterometer, video camera, radiation thermometer, and AXRTs. The SCR and ROWS directional spectrum measurements are discussed. When planning for an underflight mission, the limited endurance of the aircraft (6 hr) and flight cost (2.7 K$/hr) must be considered. The advantage of the redundancy afforded by the several wave instruments is another important consideration.

Mollo-Christensen, Erik↗

NASA NTRS1987

The Fringe Reading Facility at the Max-Planck-Institut fuer Stroemungsforschung

A Mach-Zehnder interferometer is used for optical flow measurements in a transonic wind tunnel. Holographic interferograms are reconstructed by illumination with a He-Ne-laser and viewed by a video camera through wide angle optics. This setup was used for investigating industrial double exposure holograms of truck tires in order to develop methods of automatic recognition of certain manufacturing faults. Automatic input is achieved by a transient recorder digitizing the output of a TV camera and transferring the digitized data to a PDP11-34. Interest centered around sequences of interferograms showing the interaction of vortices with a profile and subsequent emission of sound generated by this process. The objective is the extraction of quantitative data which relates to the emission of noise.

Becker, F.↗

NASA NTRS1986

Mars to earth optical communication link for the proposed Mars Sample Return mission roving vehicle

The Mars Sample Return (MSR) mission planed for 1989 will deploy a rover from its landing craft to survey the Martian surface. During traversals of the rover from one site to the next in search of samples, three-dimensional images from a pair of video cameras will be transmitted to earth; the terrestrial operators will then send back high level direction commands to the rover. Attention is presently given to the effects of wind and dust on communications, the architecture of the optical communications package, and the identification of technological areas requiring further development for MSR incorporation.

Sipes, Donald L., Jr.↗

NASA NTRS1988

Shifting Of Image Fields For Better Stereoscopic TV Images

Concept for shifting horizontal positions of TV image fields of stereoscopic TV display reduces stereoscopic depth distorting while increasing stereoscopic depth resolution of images. Applicable to form of stereoscopic TV in which two views of scene presented by two video cameras to different fields of one monitor. According to concept, view of left camera shifts to left, and right camera, to right. Images made to overlap, so observed comfortably. Shifting done by inexpensive electronic circuitry.

Diner, Daniel B.↗

NASA NTRS1989

Samara Probe For Remote Imaging

Imaging probe descends through atmosphere of planet, obtaining images of ground surface as it travels. Released from aircraft over Earth or from spacecraft over another planet. Body and single wing shaped like samara - winged seed like those of maple trees. Rotates as descends, providing panoramic view of terrain below. Radio image obtained by video camera to aircraft or spacecraft overhead.

Burke, James D.↗

NASA NTRS1988

Observations of breakup processes of liquid jets using real-time X-ray radiography

To unravel the liquid-jet breakup process in the nondilute region, a newly developed system of real-time X-ray radiography, an advanced digital image processor, and a high-speed video camera were used. Based upon recorded X-ray images, the inner structure of a liquid jet during breakup was observed. The jet divergence angle, jet breakup length, and fraction distributions along the axial and transverse directions of the liquid jets were determined in the near-injector region. Both wall- and free-jet tests were conducted to study the effect of wall friction on the jet breakup process.

Char, J. M.↗

NASA NTRS1988

Hardware development for the surface tension driven convection experiment aboard the USML-1 spacelab mission

The Surface Tension Driven Convection Experiment is a Space Transportation System flight experiment to study both transient and steady thermocapillary fluid flows aboard the USML-1 Spacelab mission planned for March 1992. Hardware is under development to establish the experimental conditions and perform the specified measurements, for both ground based research and the flight experiment in a Spacelab single rack. Major development areas include an infrared thermal imaging system for surface temperature measurement, a CO2 laser and control system for surface heating, and for flow visualization, a He-Ne laser and optical system in conjunction with an intensified video camera. For ground based work the components of each system were purchased or designed, and tested individually. The three systems will be interfaced with the balance of the experimental hardware and will constitute a working engineering model. A description of the three systems and examples of the component performance is given along with the plans for the development of flight hardware.

Pline, A. D.↗

NASA NTRS1988

High resolution video monitoring of coating thickness during plasma spraying

A new approach to monitoring the thickness of plasma sprayed coatings during application is described. The method employs a high resolution video camera and width analyzer to accurately measure the dimensions of samples having simple geometries. This approach is best suited for cylindrical or flat substrates but it may also work for selected locations on more complex geometries. Measurement accuracy is a function of specimen dimensions and extent of magnification. Tolerances of plus or minus 0.5 mil (0.13 mm) on final coating thickness can be achieved. Additionally, the plot of cumulative coating thickess versus the number of passes has proven to be a useful diagnostic tool. While the ideal plot is linear, strong deviations from linearity - indicating the need for corrective action - may be observed.

Miller, Robert A.↗