Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Very Low Frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Experimental Investigation of Low-Frequency Distributed Acoustic Sensor Responses to Two Parallel Propagating Fractures

Low-frequency distributed acoustic sensing (LF-DAS) is a diagnostic tool for hydraulic fracture propagation with far-field monitoring using fiber optic sensors. LF-DAS senses strain rate variation caused by stress field change due to fracture propagation. Fiber optic sensors are installed in the monitoring wells in the vicinity of a fractured well. From the strain responses, fracture propagation can be evaluated. To understand subsurface conditions with multiple propagating fractures, a laboratory-scale hydraulic fracture experiment was performed simulating the LF-DAS response to fracture propagation with embedded distributed optical fiber strain sensors under these conditions. The experiment was performed using a transparent cube of epoxy with two parallel radial initial flaws centered in the cube. Fluid was injected into the sample to generate fractures along the initial flaws. The experiment used distributed high-definition fiber optic strain sensors with tight spatial resolutions. The sensors were embedded at two different locations on opposite sides of the initial flaws, serving as observation/monitoring locations. We also employed finite element modeling to numerically solve the linear elastic equations of equilibrium continuity and stress–strain relationships. The measured strains from the experiment were compared to simulation results from the finite element model. The experimentally derived strain and strain-rate waterfall plots from this study show the responses to both fractures propagating, while the fracture at the lower position took most of the fluid during the experiment. Interestingly, a fracture first began propagating from the upper flaw of the two flaws, but once the lower fracture was initiated, it grew much faster than the upper fracture. Both fibers were intercepted by the lower fracture, further verifying the strain signature as a fracture is approaching and intersecting an offset fiber.

Chemistry↗
NASA NTRS1977

Development of a procedure to model high-resolution wind profiles from smoothed or low-frequency data

The derivation of simulated Jimsphere wind profiles from low-frequency rawinsonde data and a generated set of white noise data are presented. A computer program is developed to model high-resolution wind profiles based on the statistical properties of data from the Kennedy Space Center, Florida. Comparison of the measured Jimsphere data, rawinsonde data, and the simulated profiles shows excellent agreement.

Camp, D. W.↗
NASA NTRS1981

Low-frequency plasma waves near Saturn

Voyager planetary radio astronomy observations of low frequency emissions detected around the time of closest approach to Saturn and near the outbound ring plane crossing are presented. Near the ring plane an electron density of between 5 and 20 electrons/cu cm at dista

Pedersen, B. M.↗
NASA NTRS1987

Low-frequency oscillations of the large-scale stratospheric temperature field

Low-frequency analyses are reported for four years of three-day-mean satellite microwave and infrared data representative of temperatures in the stratosphere. In data representative of 30-150 mb temperatures, oscillations with 39-51 day periods are observed as a tropical dipole pattern in the Indonesia/central Pacific. In addition, the first evidence is presented for such oscillations in the southeast Pacific. Furthermore, significant 39-51 day oscillations are observed in the mid- and upper stratosphere, centered near 60 deg latitude.

Gao, Xin Hai↗
NASA NTRS1989

Calculation of low frequency vibrational resonances of submerged structures

Numerical techniques for calculating the low frequency vibrational resonances of submerged structures are reviewed. Both finite element and boundary element approaches for calculating fully-coupled added mass matrices for use in NASTRAN analysis are described and illustrated. The finite element approach is implemented using existing capability in NASTRAN. The boundary element approach uses the NASHUA structural-acoustics program to compute the added mass matrix. The two procedures are compared to each other for the case of a submerged cylindrical shell with flat end closures. It is concluded that both procedures are capable of computing accurate submerged resonances and that the more elegant boundary element procedure is easier to use but may be more expensive computationally.

Everstine, Gordon C.↗
NASA NTRS1990

Comparison of FFP predictions with measurements of a low-frequency signal propagated in the atmosphere

An experimental study of low-frequency propagation over a distance of 770 m was previously reported (J. Acoust. Soc. Am. Suppl. 1 86, S120 (1989)). For that study, sound speed profiles were reconstructed entirely from surface-layer micrometeorological data. When the acoustic data were compared with theoretical predictions from a fast field program (FFP), it was found that the FFP underpredicted sound levels measured in a shadow zone. Here, the effect on the predictions of including meteorological data for heights greater than the surface layer, i.e., wind profiles measured by a Doppler sodar, is discussed. Vertical structure of turbulence is simulated by stochastically perturbing the mean profiles, and the agreement between the acoustic data and FFP predictions is improved.

Wilson, K. Keith↗
NASA NTRS1995

Simulation study of the role of ion kinetics in low-frequency wave train evolution

The evolution of uniform, parallel propagating, low-frequency (less than or approx. ion cyclotron) wave trains is followed with a one-dimensional hybrid numerical code with fluid electrons and particle ions. We show that moderate amplitude (delta B/B less than 1/2) wave trains give instabilities and saturated states which differ completely from pure fluid evolution. This is most clearly seen when beta greater than 1 and instability exists for wavenumbers both below and above the wavenumber of an inital, left-handed wave train or pump wave. For corresponding parameters a fluid theory gives only a narrow range of instability above the pump wavenumber where decay and beat instabilities can occur. in simulations wave energy inverse cascades to smaller wavenumbers and into a greater number of forward than backward going waves. In fluids energy by decay goes mostly to backward ones of smaller wavenumber, and energy by beat goes mostly to forward ones of larger wavenumber. Neither fluid instability explains simulation results. The instability is saturated by thermalizing ions and sometimes exciting small wavenumber electrostatic or acoustic modes. In contrast, saturation in fluids first occurs by generating the harmonics of the growing linear modes. Harmonic generation is mostly absent in simulations. Simulations are carried out to long times and mostly reach a limit beyond which no further significant evolution can occur. Application to Alfvenic fluctuations in the solar wind is discussed.

Vasquez, Bernard J.↗
DOE OSTI2021

Low-Frequency Electronic Noise in Quasi-2D van der Waals Antiferromagnetic Semiconductor FePS 3 —Signatures of Phase Transitions

Here, low-frequency current fluctuations, i.e., noise, in the quasi-2D van der Waals antiferromagnetic semiconductor FePS 3 with the electronic bandgap of 1.5 eV is investigated. The electrical and noise characteristics of the p-type, highly resistive, thin films of FePS 3 are measured at different temperatures. The noise spectral density is of the 1/f-type over most of the examined temperature range but reveals well-defined Lorentzian bulges, and increases strongly near the Néel temperature T N =118 K (f is the frequency). Intriguingly, the noise spectral density attains its minimum at temperature T≈200 K, which is attributed to an interplay of two opposite trends in noise scaling—one for semiconductors and another for materials with the phase transitions. The Lorentzian corner frequencies reveal unusual dependence on temperature and bias voltage, suggesting that their origin is different from the generation—recombination noise in conventional semiconductors. The obtained results are important for proposed applications of antiferromagnetic semiconductors in spintronic devices. They also attest to the power of the noise spectroscopy for monitoring various phase transitions.

36 MATERIALS SCIENCE↗
NASA NTRS2016

MAVEN Observation of an Obliquely Propagating Low-Frequency Wave Upstream of Mars

We report Mars Atmosphere and Volatile EvolutioN (MAVEN) mission observations of a large amplitude low-frequency plasma wave that propagated oblique to the ambient magnetic field upstream of Mars along with a non-solar-wind plasma component that had a flow velocity perpendicular to the magnetic field. We consider nine possibilities for this wave that include various combinations of its propagation direction, polarization in the solar wind frame, and ion source responsible for its generation. Using the observed wave parameters and the measured plasma parameters as constraints, we uniquely identify the wave by systematically discarding these possibilities. We determine that the wave is a right-hand polarized wave that propagated upstream in the solar wind frame. We find two possibilities for the ion source that can be responsible for this wave generation. They are either newly born pickup protons or reflected solar wind protons from the bow shock.We determine that the observed non-solar-wind component is not responsible for the wave generation, and it is likely that the non-solar-wind component was merely perturbed by the passage of the wave.

low frequency wave↗
NASA NTRS2019

Electron Scattering by Low-frequency Whistler Waves at Earth’s Bow Shock

Electrons are accelerated to nonthermal energies at shocks in space and astrophysical environments. While shock drift acceleration (SDA) has been considered a key process of electron acceleration at Earth’s bow shock, it has also been recognized that SDA needs to be combined with an additional stochastic process to explain the observed power-law energy spectra. Here, we show mildly energetic (∼0.5 keV) electrons are locally scattered (and accelerated while being confined) by magnetosonic-whistler waves within the shock transition layer, especially when the shock angle is large (θ(sub Bn) approximately equal or greater than 70°). When measured by the Magnetospheric Multiscale mission at a high cadence, ∼0.5 keV electron flux increased exponentially in the shock transition layer. However, the flux profile was not entirely smooth and the fluctuation showed temporal/spectral association with large-amplitude (δB/B ~ 0.3), low-frequency (approximately equal or less than 0.1 Ω(sub ce) where Ω(sub ce) is the cyclotron frequency), obliquely propagating (θ(sub kB) ~ 30°–60°, where θ(sub kB) is the angle between the wave vector and background magnetic field) whistler waves, indicating that the particles were interacting with the waves. Particle simulations demonstrate that, although linear cyclotron resonances with ∼0.5 keV electrons are unlikely due to the obliquity and low frequencies of the waves, the electrons are still scattered beyond 90° pitch angle by (1) resonant mirroring (transit-time damping), (2) non-resonant mirroring, and (3) subharmonic cyclotron resonances. Such coupled nonlinear scattering processes are likely to provide the stochasticity needed to explain the power-law formation.

Oka, M.↗
NASA NTRS1984

Correlated low-frequency electric and magnetic noise along the auroral field lines

Dynamics Explorer 1 measurements of intense low-frequency electric and magnetic noise observed at low altitudes over the auroral zone are described. The intensity of both the electric and magnetic fields decreases rapidly with increasing frequency. Most of the energy is at frequencies below the O(+) cyclotron frequency, and some evidence is found for a cutoff or change in spectral slope near that frequency. The magnetic to electric field ratio decreases rapidly with increasing radial distance and also decreases with increasing frequency. The polarization of the electric field in a plane perpendicular to the earth's magnetic field is essentially random. The transverse electric and magnetic fields are closely correlated, with the average Poynting flux directed toward the earth. The total electromagnetic power flow associated with the noise is substantial. Two general models are discussed to interpret these observations, one based on static electric and magnetic fields imbedded in the ionosphere and the other based on Alfven waves propagating along the auroral field lines.

Gurnett, D. A.↗