Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Vector Processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Sparse Binary Matrix-Vector Multiplication on Neuromorphic Computers

Neuromorphic computers offer the opportunity for low-power, efficient computation. Though they have been primarily applied to neural network tasks, there is also the opportunity to leverage the inherent characteristics of neuromorphic computers (low power, massive parallelism, collocated processing and memory) to perform non-neural network tasks. Here, we demonstrate how an approach for performing sparse binary matrix-vector multiplication on neuromorphic computers. We describe the approach, which relies on the connection between binary matrix-vector multiplication and breadth first search, and we introduce the algorithm for performing this calculation in a neuromorphic way. We validate the approach in simulation. Finally, we provide a discussion of the runtime of this algorithm and discuss where neuromorphic computers in the future may have a computational advantage when performing this computation.

Schuman, Catherine↗
DOE OSTI2024

Measurement of the e+e− → $$ {K}_S^0{K}_L^0 $$π0 cross sections from $$ \sqrt{s} $$ = 2.000 to 3.080 GeV

Abstract Based one + e − collision data collected at center-of-mass energies from 2.000 to 3.080 GeV by the BESIII detector at the BEPCII collider, a partial wave analysis is performed for the processe + e − →$$ {K}_S^0{K}_L^0 $$ K S 0 K L 0 π 0 . The results allow the Born cross sections of the processe + e − →$$ {K}_S^0{K}_L^0 $$ K S 0 K L 0 π 0 , as well as its subprocessese + e − →K ∗ (892) 0 $$ \overline{K} $$ K ¯ 0 and$$ {K}_2^{\ast } $$ K 2 ∗ (1430) 0 $$ \overline{K} $$ K ¯ 0 to be measured. The Born cross sections fore + e − →$$ {K}_S^0{K}_L^0 $$ K S 0 K L 0 π 0 are consistent with previous measurements by BaBar, but with substantially improved precision. The Born cross section lineshape of the processe + e − K ∗ (892) 0 $$ \overline{K} $$ K ¯ 0 is consistent with a vector meson state around 2.2 GeV with a significance of 3.2σ. A Breit-Wigner fit determines its mass asM Y = (2164.7±9.1±3.1) MeV/c 2 and its width as Γ Y = (32.4±21.0±1.8) MeV.

Physics↗
DOE OSTI2022

Simulating single-particle dynamics in magnetized plasmas: The RMF code

The RMF (Rotating Magnetic Field) code is designed to calculate the motion of a charged particle in a given electromagnetic field. It integrates Hamilton’s equations in cylindrical coordinates using an adaptive predictor-corrector double-precision variable-coefficient ordinary differential equation solver for speed and accuracy. RMF has multiple capabilities for the field. Particle motion is initialized by specifying the position and velocity vectors. Here, the six-dimensional state vector and derived quantities are saved as functions of time. A post-processing graphics code, XDRAW, is used on the stored output to plot up to 12 windows of any two quantities using different colors to denote successive time intervals. Multiple cases of RMF may be run in parallel and perform data mining on the results. Recent features are a synthetic diagnostic for simulating the observations of charge-exchange-neutral energy distributions and RF grids to explore a Fermi acceleration parallel to static magnetic fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

X 17 boson and the H 3 ( p , e + e – ) He 4 and He 3 ( n , e + e – ) He 4 processes: A theoretical analysis

The present work deals with e + – e – pair production in the four-nucleon system. We first analyze the process as a purely electromagnetic one in the context of a state-of-the-art approach to nuclear strong-interaction dynamics and nuclear electromagnetic currents, derived from chiral effective field theory ( χ EFT ) . Next, we examine how the exchange of a hypothetical low-mass boson would impact the cross section for such a process. We consider several possibilities, that this boson is either a scalar, pseudoscalar, vector, or axial particle. The ab initio calculations use exact hyperspherical-harmonics methods to describe the bound state and low-energy spectrum of the A = 4 continuum, and they fully account for initial state interaction effects in the 3 + 1 clusters. While electromagnetic interactions are treated to high orders in the chiral expansion, the interactions of the hypothetical boson with nucleons are modeled in leading-order χ EFT (albeit, in some instances, selected subleading contributions are also accounted for). We also provide an overview of possible future experiments probing pair production in the A = 4 system at a number of candidate facilities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Search for resonant $WZ$ production in the fully leptonic final state in proton–proton collisions at $\sqrt{s}$= 13 TeV with the ATLAS detector

A search for a $WZ$ resonance, in the fully leptonic final state (electrons or muons), is performed using 139 fb –1 of data collected at a centre-of-mass energy of 13 TeV by the ATLAS detector at the Large Hadron Collider. The results are interpreted in terms of a singly charged Higgs boson of the Georgi–Machacek model, produced by WZ fusion, and of a Heavy Vector Triplet, with the resonance produced by $WZ$ fusion or the Drell–Yan process. No significant excess over the Standard Model prediction is observed and limits are set on the production cross-section times branching ratio as a function of the resonance mass for these processes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

LAROMance Grade 91 Model Integration in NEML2

New reactor designs are targeting higher operating temperatures for increased thermal efficiency when compared to the current fleet of light water reactors. Designing structural components for these high temperature environments with reliable long-term operations requires material models that can accurately capture the deformation mechanisms active in these environments. The LAROMance surrogate material models are based on a database of mechanistic crystal plasticity simulations for high-temperature conditions. Inputs to the LAROMance models reflect the microstructural pedigree of the material, like dislocation densities and precipitate contents. Based on the evolution of these microstructural features, the LAROMance model provides the engineering scale constitutive model response. The LAROMance model was recently parameterized for Grade 91, a high temperature alloy. In the present work, the Grade 91 LAROMance model is implemented in the New Material Model Library, version 2 (NEML2). NEML2 provides a modular way to build material models from smaller blocks and was developed to vectorize the material update to efficiently run on modern computational architectures with graphics processing unit accelerators. NEML2 constitutive models can be used in simulations based on the multiphysics object-oriented simulation environment (MOOSE). This report provides details on the implementation of the Grade 91 LAROMance model in NEML2 and its verification of engineering scale finite element simulations in MOOSE.

42 - ENGINEERING↗
DOE OSTI2026

Hidden-sectors search and probe of discrete symmetries at the REDTOP experiment

The $η$ and $η^{\prime}$ mesons are nearly unique in the particle universe since they are nearly Goldstone bosons, and their decay dynamics are strongly constrained. While earlier experiments collected samples of order $\sim 10^{9}η$, the proposed REDTOP (Rare Eta Decays To Observe Physics Beyond the Standard Model) facility targets $\mathcal{O}(10^{14})η$ and $\mathcal{O}(10^{12})η^\prime$, enabling broad searches for physics beyond the Standard Model. In this work, we present studies evaluating REDTOP sensitivity to processes that couple the Standard Model to New Physics through four portals: the Vector (dark photon), the Scalar (Higgs-mixing), the Axion-like, and the Heavy Lepton. In parallel, the proposed statistics allow precise tests of $CP$ and $T$ invariance and lepton universality and improve determinations of the $η/η'$ transition form factors, which are crucial inputs to the hadronic light-by-light contribution to the muon anomalous magnetic moment $(g-2)_μ$.

Gatto, C. [INFN, Naples; Northern Illinois U.]↗
DOE OSTI2017

Thermo-Catalytic Reforming of municipal solid waste

Highlights: • Successful Thermo-Catalytic Reforming of municipal solid waste into fuels. • Highly de-oxygenated bio-oil was produced using this process. • Bio-oil produced had a high-energy content and low total acid number. • 60% of the energy in the feedstock was transferred to the products. • Conversion of MSW using the TCR® offers many promising advantages. - Abstract: Municipal Solid Waste (MSW) refers to a heterogeneous mixture composed of plastics, paper, metal, food and other miscellaneous items. Local authorities commonly dispose of this waste by either landfill or incineration which are both unsustainable practices. Disposing of organic wastes via these routes is also becoming increasingly expensive due to rising landfill taxes and transport costs. The Thermo-Catalytic Reforming (TCR®) process, is a proposed valorisation route to transform organic wastes and residues, such as MSW, into sustainable energy vectors including (H{sub 2} rich synthesis gas, liquid bio-oil and solid char). The aim herein, was to investigate the conversion of the organic fraction of MSW into fuels and chemicals utilising the TCR technology in a 2 kg/h continuous pilot scale reactor. Findings show that MSW was successfully processed with the TCR after carrying out a feedstock pre-treatment step. Approximately, 25 wt.% of the feedstock was converted into phase separated liquids, composed of 19 wt.% aqueous phase and 6 wt.% organic phase bio-oil. The analysis of the bio-oil fraction revealed physical and chemical fuel properties, higher heating value (HHV) of 38 MJ/kg, oxygen content <7 wt.% and water content <4 wt.%. Due to the bio-oil’s chemical and physical properties, the bio-oil was found to be directly miscible with fossil diesel when blended at a volume ratio of 50:50. The mass balance closure was 44 wt.% synthesis gas, with a H{sub 2} content of 36 vol% and HHV of 17.23 MJ/Nm{sup 3}, and 31 wt.% char with a HHV of 17 MJ/kg. The production of high quantities of H{sub 2} gas and highly de-oxygenated organic liquids makes downstream hydrogen separation and subsequent hydro-deoxygenation of the produced bio-oil a promising upgrading step to achieve drop-in transportation fuels from MSW.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Efficient generation and amplification of intense vortex and vector laser pulses via strongly-coupled stimulated Brillouin scattering in plasmas

The past decade has seen tremendous progress in the production and utilization of vortex and vector laser pulses. Although both are considered as structured light beams, the vortex lasers have helical phase fronts and phase singularities, while the vector lasers have spatially variable polarization states and polarization singularities. In contrast to the vortex pulses that carry orbital angular momentum (OAM), the vector laser pulses have a complex spin angular momentum (SAM) and OAM coupling. Despite many potential applications enabled by such pulses, the generation of high-power/-intensity vortex and vector beams remains challenging. Here, we demonstrate using theory and three-dimensional simulations that the strongly-coupled stimulated Brillouin scattering (SC-SBS) process in plasmas can be used as a promising amplification technique with up to 65% energy transfer efficiency from the pump beam to the seed beam for both vortex and vector pulses. We also show that SC-SBS is strongly polarization-dependent in plasmas, enabling an all-optical polarization control of the amplified seed beam. Additionally, the interaction of such structured lasers with plasmas leads to various angular momentum couplings and decouplings that produce intense new light structures with controllable OAM and SAM. This scheme paves the way for novel optical devices such as plasma-based amplifiers and light field manipulators.

Physics↗
DOE OSTI2018

Search for pair production of up-type vector-like quarks and for four-top-quark events in final states with multiple b-jets with the ATLAS detector

A search for pair production of up-type vector-like quarks ( T ) with a significant branching ratio into a top quark and either a Standard Model Higgs boson or a Z boson is presented. The same analysis is also used to search for four-top-quark production in several new physics scenarios. The search is based on a dataset of pp collisions at $\sqrt{s}$ =13 TeV recorded in 2015 and 2016 with the ATLAS detector at the CERN Large Hadron Collider and corresponds to an integrated luminosity of 36.1 fb -1 . Data are analysed in the lepton+jets final state, characterised by an isolated electron or muon with high transverse momentum, large missing transverse momentum and multiple jets, as well as the jets + E T miss final state, characterised by multiple jets and large missing transverse momentum. The search exploits the high multiplicity of jets identified as originating from b -quarks, and the presence of boosted, hadronically decaying top quarks and Higgs bosons reconstructed as large-radius jets, characteristic of signal events. No significant excess above the Standard Model expectation is observed, and 95% CL upper limits are set on the production cross sections for the different signal processes considered. These cross-section limits are used to derive lower limits on the mass of a vector-like T quark under several branching ratio hypotheses assuming contributions from T → W b , Zt , Ht decays. The 95% CL observed lower limits on the T quark mass range between 0 . 99 TeV and 1 . 43 TeV for all possible values of the branching ratios into the three decay modes considered, significantly extending the reach beyond that of previous searches. Additionally, upper limits on anomalous four-top-quark production are set in the context of an effective field theory model, as well as in an universal extra dimensions model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

A Decision-Making Machine Learning Approach in Hermite Spectral Approximations of Partial Differential Equations

The accuracy and effectiveness of Hermite spectral methods for the numerical discretization of partial differential equations on unbounded domains are strongly affected by the amplitude of the Gaussian weight function employed to describe the approximation space. This is particularly true if the problem is under-resolved, i.e., there are no enough degrees of freedom. The issue becomes even more crucial when the equation under study is time-dependent, forcing in this way the choice of Hermite functions where the corresponding weight depends on time. In order to adapt dynamically the approximation space, it is here proposed an automatic decision-making process that relies on machine learning techniques, such as deep neural networks and support vector machines. The algorithm is numerically tested with success on a simple 1D problem, but the main goal is its exportability in the context of more serious applications. Here we also show at the end an application in the framework of plasma physics.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Search for a new heavy resonance decaying to a top quark and a neutral scalar boson in proton-proton collisions at $\sqrt{s}$ = 13 TeV

A first search at the LHC for a new heavy resonance decaying to a top quark and a neutral scalar boson ϕ in the fully hadronic final state is presented, where the ϕ boson is identified by its decay into a bottom quark-antiquark pair. The search is focused on final states in which the decay products of the highly Lorentz boosted top quark and ϕ boson are each reconstructed as a single, large-radius jet with distinct substructure. The analysis is performed using proton-proton collision data at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 138 fb −1 , recorded with the CMS detector at the LHC in 2016–2018. The single production of a vector-like top quark, T′, is used as a benchmark model for the signal process. The results of this search are combined with those of a previous CMS search in which semileptonic decays of the top quark were used. No significant excess of data is observed with respect to the background prediction. For the case where the neutral scalar is a standard model Higgs boson and the T′ quark width is 5% of its mass, T′ quark masses between 0.85 and 1.3 TeV are excluded at 95% confidence level and the most stringent limits to date are set for masses above 2 TeV . For other ϕ boson masses, upper limits as low as 0.1 fb are set on the product of the T′ quark production cross section and branching fraction for its decay to a top quark and a ϕ boson.

Boosted↗
DOE OSTI2019

Electron-Phonon Coupling from Ab Initio Linear-Response Theory within the G W Method: Correlation-Enhanced Interactions and Superconductivity in Ba 1 - x K x BiO 3

We present a new first-principles linear-response theory of changes due to perturbations in the quasiparticle self-energy operator within the GW method. This approach, named GW perturbation theory ( GW PT), is applied to calculate the electron-phonon ( e -ph) interactions with the full inclusion of the GW nonlocal, energy-dependent self-energy effects, going beyond density-functional perturbation theory. Avoiding limitations of the frozen-phonon technique, GW PT gives access to e -ph matrix elements at the GW level for all phonons and scattering processes, and the computational cost scales linearly with the number of phonon modes (wave vectors and branches) investigated. We demonstrate the capabilities of GW PT by studying the e -ph coupling and superconductivity in Ba 0.6 K 0.4 BiO 3 . We show that many-electron correlations significantly enhance the e -ph interactions for states near the Fermi surface, and explain the observed high superconductivity transition temperature of Ba 0.6 K 0.4 BiO 3 as well as its doping dependence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Photonuclear tomography in ultraperipheral heavy-ion collisions

We present a theoretical investigation of photonuclear tomography as a novel technique for probing the internal structure of nuclei. In this approach, ultraperipheral heavy-ion collisions (UPCs) serve as a source of intense fluxes of virtual photons, which induce coherent production of vector mesons. By analyzing the probabilities and cross sections of these photon-induced processes, we propose a methodology for reconstructing the spatial distribution of nucleons within the nucleus. Our framework provides a systematic way to access information on the nuclear geometry probed in UPCs, offering new opportunities for studies of nuclear structure using particle production as a probe. Numerical calculations for selected examples illustrate the feasibility and potential of this method.

particle & resonance production↗
DOE OSTI2024

NSTXU Diagnostic Disruption Dynamic Loading Represented by Response Spectra

This article presents the results of transient dynamic simulations of loads due to disruption eddy currents on the NSTXU vacuum vessel. Dynamic loading at diagnostic mounting locations is expressed as response spectra derived from the time history results of the dynamic structural simulations of a variety of disruption scenarios. The disruption simulations draw on a history of the project assessments of worst case disruptions for specific components. Major efforts to assess disruption loading have included the vacuum vessel which is the major structural support for the machine, as well as the passive plates (PPs), high harmonic fast wave (HHFW) antenna, and centerstack casing. Each one of these efforts included transient electromagnetic simulations producing time-dependent eddy current Lorentz loads (and in some cases halo loads) which then were applied to time-dependent structural dynamic analyses intended to obtain the proper dynamic amplification factors. In some instances, the EM model and structural model were identical allowing direct transfer of EM forces to the structural model. In other cases, the EM and structural model were not identical and the vector potential (VP) transfer method was used. The results files from these analyses were available (or re-run) to post process in ANSYS Classic time history postprocessor. In conclusion, the ANSYS command is used to create response spectra from time history data at desired points on the vessel.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2017

Functional diversity and redundancy across fish gut, sediment and water bacterial communities

Here, this work explores the functional diversity and redundancy in a bacterial metacommunity constituted of three habitats (sediment, water column and fish gut) in a coastal lagoon under anthropogenic pressure. Comprehensive functional gene arrays covering a wide range of ecological processes and stress resistance genes to estimate the functional potential of bacterial communities were used. Then, diversity partitioning was used to characterize functional diversity and redundancy within (α), between (β) and across (γ) habitats. It was showed that all local communities exhibit a highly diversified potential for the realization of key ecological processes and resistance to various environmental conditions, supporting the growing evidence that macro-organisms microbiomes harbour a high functional potential and are integral components of functional gene dynamics in aquatic bacterial metacommunities. Several levels of functional redundancy at different scales of the bacterial metacommunity were observed (within local communities, within habitats and at the metacommunity level). The findings indicated a high potential for the realization of spatial ecological insurance within this ecosystem, that is, the functional compensation among microorganisms for the realization and maintenance of key ecological processes, within and across habitats. Finally, the role of macro-organisms as dispersal vectors of microbes and their potential influence on marine metacommunity dynamics were discussed.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Braneworld cosmological effect on freeze-in dark matter density and lifetime frontier

In the 5-dimensional braneworld cosmology, the Friedmann equation of our 4-dimensional universe on a brane is modified at high temperatures while the standard Big Bang cosmology is reproduced at low temperatures. Based on two well-known scenarios, the Randall–Sundrum and Gauss–Bonnet braneworld cosmologies, we investigate the braneworld cosmological effect on the relic density of a non-thermal dark matter particle whose interactions with the Standard Model particles are so weak that its relic density is determined by the freeze-in mechanism. For dark matter production processes in the early universe, we assume a simple scenario with a light vector-boson mediator for the dark matter particle to communicate with the Standard Model particles. We find that the braneworld cosmological effect can dramatically alters the resultant dark matter relic density from the one in the standard Big Bang cosmology. As an application, we consider a right-handed neutrino dark matter in the minimal B – L extended Standard Model with a light B – L gauge boson (Z') as a mediator. We find an impact of the braneworld cosmological effect on the search for the long-lived Z' boson at the planned/proposed Lifetime Frontier experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Commissioning of SRF Cavity Analyzer System

Research and development in Superconducting Radio Frequency (SRF) cavities manufacturing, surface treatment, preparation, and doping techniques for the improvement of cavities performance necessitate reliable cavities’ intrinsic quality factor measurement with accurate and repeatable results. Fermilab Vertical Test Stand facility (VTS) performs ~270 cavities tests per year, including R&D cavities as well as production cavities at each step of their preparation for the placement in accelerator’s cryomodules. Current Fermilab VTS testing system is based on the scalar approach of power measurement, which neglects potential error factors of the RF networks with distributed parameters, hence the assessed measurement errors of such a system might be slightly underestimated. Alternative approach, utilizing a vector measurement (amplitude and phase) of RF signals in the setup with a cavity as a device under test, promises an enhanced accuracy and results traceability. New cavity an alyser system based on this approach (Vector VTS) was developed by D. Frolov et al. and currently undergoes a commissioning process. Basic underlying principles of the system will be presented with the methods of quality factor extraction from S-parameters measurement of multiport cavities and brief error analysis will be discussed. The system architecture will be shown with main components parameters and ensuing testing capabilities. Multiple tests results will be discussed with a cross-check comparison of the results obtained with a conventional testing method. System advantages such as automated calibration process and additional features as a built- in microphonics measurement capability will be presented.

Netepenko, A.↗