Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Uncertainty modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Crop Model Improvement Reduces the Uncertainty of the Response to Temperature of Multi-Model Ensembles

To improve climate change impact estimates and to quantify their uncertainty, multi-model ensembles (MMEs) have been suggested. Model improvements can improve the accuracy of simulations and reduce the uncertainty of climate change impact assessments. Furthermore, they can reduce the number of models needed in a MME. Herein, 15 wheat growth models of a larger MME were improved through re-parameterization and/or incorporating or modifying heat stress effects on phenology, leaf growth and senescence, biomass growth, and grain number and size using detailed field experimental data from the USDA Hot Serial Cereal experiment (calibration data set). Simulation results from before and after model improvement were then evaluated with independent field experiments from a CIMMYT worldwide field trial network (evaluation data set). Model improvements decreased the variation (10th to 90th model ensemble percentile range) of grain yields simulated by the MME on average by 39% in the calibration data set and by 26% in the independent evaluation data set for crops grown in mean seasonal temperatures greater than 24 C. MME mean squared error in simulating grain yield decreased by 37%. A reduction in MME uncertainty range by 27% increased MME prediction skills by 47%. Results suggest that the mean level of variation observed in field experiments and used as a benchmark can be reached with half the number of models in the MME. Improving crop models is therefore important to increase the certainty of model-based impact assessments and allow more practical, i.e. smaller MMEs to be used effectively.

damage assessment↗

WFIRST Coronagraph Flight Performance Modeling

As it has for the past few years, numerical modeling is being used to predict the on-orbit, high-contrast imaging performance of the WFIRST coronagraph, which was recently defined to be solely a technology demonstrator. A consequence has been a realignment of modeling priorities and revised applications of modeling uncertainty factors and margins, which apply to multiple factors such as pointing and wavefront jitter, thermally-induced deformations, polarization, and aberration sensitivities. At the same time, the models have increased in fidelity as additional parameters have been added, such as time-dependent pupil shear and mid-spatial-frequency deformations of the primary and secondary mirrors, detector effects, and reaction-wheel-speed-dependent pointing and wavefront jitter.

Trauger, John↗

Dynamic modeling and adaptive control for space stations

Of all large space structural systems, space stations present a unique challenge and requirement to advanced control technology. Their operations require control system stability over an extremely broad range of parameter changes and high level of disturbances. During shuttle docking the system mass may suddenly increase by more than 100% and during station assembly the mass may vary even more drastically. These coupled with the inherent dynamic model uncertainties associated with large space structural systems require highly sophisticated control systems that can grow as the stations evolve and cope with the uncertainties and time-varying elements to maintain the stability and pointing of the space stations. The aspects of space station operational properties are first examined, including configurations, dynamic models, shuttle docking contact dynamics, solar panel interaction, and load reduction to yield a set of system models and conditions. A model reference adaptive control algorithm along with the inner-loop plant augmentation design for controlling the space stations under severe operational conditions of shuttle docking, excessive model parameter errors, and model truncation are then investigated. The instability problem caused by the zero-frequency rigid body modes and a proposed solution using plant augmentation are addressed. Two sets of sufficient conditions which guarantee the globablly asymptotic stability for the space station systems are obtained.

Ih, C. H. C.↗

Repeatability Modeling for Wind-Tunnel Measurements: Results for Three Langley Facilities

Data from extensive check standard tests of seven measurement processes in three NASA Langley Research Center wind tunnels are statistically analyzed to test a simple model previously presented in 2000 for characterizing short-term, within-test and across-test repeatability. The analysis is intended to support process improvement and development of uncertainty models for the measurements. The analysis suggests that the repeatability can be estimated adequately as a function of only the test section dynamic pressure over a two-orders- of-magnitude dynamic pressure range. As expected for low instrument loading, short-term coefficient repeatability is determined by the resolution of the instrument alone (air off). However, as previously pointed out, for the highest dynamic pressure range the coefficient repeatability appears to be independent of dynamic pressure, thus presenting a lower floor for the standard deviation for all three time frames. The simple repeatability model is shown to be adequate for all of the cases presented and for all three time frames.

Hemsch, Michael J.↗

Evaluating Differences Among Crop Models in Simulating Soybean in-Season Growth

Crop models are useful tools for simulating agricultural systems that require continued model development and testing to increase their robustness and improve how they describe our current understanding of processes. Coordinated and “blind” evaluation of multiple models using same protocols and experimental datasets provides unique opportunities to further improve models and enhance their reliability. For soybean [Glycine max (L.) Merr.], there has been limited coordinated multi-model evaluations for the simulation of in-season plant growth dynamics. We evaluated ten dynamic soybean crop models for their simulation of in-season plant growth using data from five experiments conducted in Argentina, Brazil, France, and USA. We evaluated models after a Blind (using only phenology data) and a Full calibration (with in-season and end-of-season variables). Calibration reduced model uncertainty by reducing standard bias for the simulation of in-season variables (biomass, leaf, pod, and stem weights, and leaf area index, LAI). However, we found that most models had difficulty in reproducing leaf growth dynamics, with normalized root mean squared error (nRMSE) of 56% for leaf weight and 43% for LAI (across locations and models after Full calibration). Models with different levels of complexity and experience were capable of simulating final seed yield at maturity with reasonable accuracy (nRMSE of 8–31% after Full calibration). However, the nRMSE for pod weight (of 17–64% after Full calibration) was two-fold larger than that of seed yield. Moreover, the models differed in how they simulated timing from sowing to beginning seed growth (47–93 days) and effective seed filling period (18–54 days), owing to model structural differences in defining the reproductive developmental stages. Overall, we identified the following processes that can benefit from further model improvement: leaf expansion and senescence, reproductive phenology, and partitioning to reproductive growth. Simulation of pod wall tissue and individual seed cohorts is another aspect that many models currently lack. Model improvement can benefit from high-temporal resolution experimental datasets that concurrently account for phenology, plant growth, and partitioning. Further, we recommend collecting reproductive phenology in the field consistent with actual dry matter allocation to organs in the models and collecting multiple observations of seed and pod weight to aid model improvement for simulation of seed growth and yield formation.

Agricultural Model Intercomparison and Improvement↗

Utilizing Flight Data to Update Aeroelastic Stability Estimates

Stability analysis of high performance aircraft must account for errors in the system model. A method for computing flutter margins that incorporates flight data has been developed using robust stability theory. This paper considers applying this method to update flutter margins during a post-flight or on-line analysis. Areas of modeling uncertainty that arise when using flight data with this method are investigated. The amount of conservatism in the resulting flutter margins depends on the flight data sets used to update the model. Post-flight updates of flutter margins for an F/A-18 are presented along with a simulation of on-line updates during a flight test.

Lind, Rick↗

An intercomparison of nitrogen-containing species in Nimbus 7 LIMS and SAMS data

Odd-nitrogen chemistry and transport are analyzed using a two-dimensional model and Nimbus 7 data. The Nimbus 7 data include: measurements of O3, NO2, HNO3, H2O, and temperature by the LIMS instrument; N2O, CH4, and temperature measurements by the SAMS instrument; and O3 data from the SBUV instrument. The characteristics of the two-dimensional model used in the study, a modified Guthrie et al. (1984) model, are described. NO2 and HNO3 are calculated using the two-dimensional model, and the computed data are compared with the LIMS NO2 and HNO3 measurements. The model uncertainties are computed based on the photochemical equilibrium assumption, and the role of stratospheric dynamics in determining NO2 and HNO3 is discussed. It is observed that there is good correlation between the LIMS and model data in the upper stratosphere; however, the data do not correspond in the lower stratosphere. The effect of nitrogen sources, such as lightning, on the stratospheric odd nitrogen distribution is examined.

Jackman, Charles H.↗

Global Comparison of CFD and Wind-Tunnel-Derived Force and Moment Databases for the Space Launch System

Recently a very large (739 runs) collection of high-fidelity RANS CFD solutions was obtained for Space Launch System ascent aerodynamics for the vehicle to be used for the first exploratory (unmanned) mission (EM-1). The extensive computations, at full-scale conditions, were originally developed to obtain detailed line and protuberance loads and surface pressures for venting analyses. The line loads were eventually integrated for comparison of the resulting forces and moments to the database that was derived from wind tunnel tests conducted at sub-scale conditions. The comparisons presented herein cover the ranges 0.5 < or = M(infinity) < or = 5, −6deg < or = alpha < or = 6deg, and −6deg < or = beta < or = 6deg. For detailed comparisons, slender-body-theory-based component build-up aero models from missile aerodynamics are used. The differences in the model fit coefficients are shown to be relatively small except for the low supersonic Mach number range, 1.1 < or = M(infinity) < or = 2.0. The analysis is intended to support process improvement and development of uncertainty models.

Hemsch, Michael J.↗

Tuning and Robustness Analysis for the Orion Absolute Navigation System

The Orion Multi-Purpose Crew Vehicle (MPCV) is currently under development as NASA's next-generation spacecraft for exploration missions beyond Low Earth Orbit. The MPCV is set to perform an orbital test flight, termed Exploration Flight Test 1 (EFT-1), some time in late 2014. The navigation system for the Orion spacecraft is being designed in a Multi-Organizational Design Environment (MODE) team including contractor and NASA personnel. The system uses an Extended Kalman Filter to process measurements and determine the state. The design of the navigation system has undergone several iterations and modifications since its inception, and continues as a work-in-progress. This paper seeks to show the efforts made to-date in tuning the filter for the EFT-1 mission and instilling appropriate robustness into the system to meet the requirements of manned space ight. Filter performance is affected by many factors: data rates, sensor measurement errors, tuning, and others. This paper focuses mainly on the error characterization and tuning portion. Traditional efforts at tuning a navigation filter have centered around the observation/measurement noise and Gaussian process noise of the Extended Kalman Filter. While the Orion MODE team must certainly address those factors, the team is also looking at residual edit thresholds and measurement underweighting as tuning tools. Tuning analysis is presented with open loop Monte-Carlo simulation results showing statistical errors bounded by the 3-sigma filter uncertainty covariance. The Orion filter design uses 24 Exponentially Correlated Random Variable (ECRV) parameters to estimate the accel/gyro misalignment and nonorthogonality. By design, the time constant and noise terms of these ECRV parameters were set to manufacturer specifications and not used as tuning parameters. They are included in the filter as a more analytically correct method of modeling uncertainties than ad-hoc tuning of the process noise. Tuning is explored for the powered-flight ascent phase, where measurements are scarce and unmodelled vehicle accelerations dominate. On orbit, there are important trade-off cases between process and measurement noise. On entry, there are considerations about trading performance accuracy for robustness. Process Noise is divided into powered flight and coasting ight and can be adjusted for each phase and mode of the Orion EFT-1 mission. Measurement noise is used for the integrated velocity measurements during pad alignment. It is also used for Global Positioning System (GPS) pseudorange and delta- range measurements during the rest of the flight. The robustness effort has been focused on maintaining filter convergence and performance in the presence of unmodeled error sources. These include unmodeled forces on the vehicle and uncorrected errors on the sensor measurements. Orion uses a single-frequency, non-keyed GPS receiver, so the effects due to signal distortion in Earth's ionosphere and troposphere are present in the raw measurements. Results are presented showing the efforts to compensate for these errors as well as characterize the residual effect for measurement noise tuning. Another robustness tool in use is tuning the residual edit thresholds. The trade-off between noise tuning and edit thresholds is explored in the context of robustness to errors in dynamics models and sensor measurements. Measurement underweighting is also presented as a method of additional robustness when processing highly accurate measurements in the presence of large filter uncertainties.

Holt, Greg N.↗

PAN AIR analysis of the NASA/MCAIR 279-3: An advanced supersonic V/STOL fighter/attack aircraft

PAN AIR is a computer program for predicting subsonic or supersonic linear potential flow about arbitrary configurations. The program was applied to a highly complex single-engine-cruise V/STOL fighter/attack aircraft. Complexities include a close-coupled canard/wing, large inlets, and four exhaust nozzles mounted directly under the wing and against the fuselage. Modeling uncertainties involving canard wake location and flow-through approximation through the inlet and the exhaust nozzles were investigated. The recently added streamline capability of the program was utilized to evaluate visually the predicted flow over the model. PAN AIR results for Mach numbers of 0.6, 0.9, and angles of attack of 0, 5, and 10 deg. were compared with data obtained in the Ames 11- by 11-Foot Transonic Wind tunnel, at a Reynolds number of 3.69 x 10 to the 6th power based on c bar.

Madson, Michael D.↗

Robust stability of second-order systems

A feedback linearization technique is used in conjunction with passivity concepts to design robust controllers for space robots. It is assumed that bounded modeling uncertainties exist in the inertia matrix and the vector representing the coriolis, centripetal, and friction forces. Under these assumptions, the controller guarantees asymptotic tracking of the joint variables. A Lagrangian approach is used to develop a dynamic model for space robots. Closed-loop simulation results are illustrated for a simple case of a single link planar manipulator with freely floating base.

Chuang, C.-H.↗

A passivity based controller for free base manipulators

A feedback linearization technique is used in conjunction with passivity concepts to design robust controllers for free base robots. It is assumed that bounded modeling uncertainties exist in the inertia matrix and the vector representing the coriolis, centripetal, and friction forces. Under these assumptions, the controller guarantees asymptotic tracking of the joint variables. A Lagrangian approach is used to develop a dynamic model for space robots. Closed-loop simulation results are illustrated for a simple case of a single link planar space manipulator with freely floating base.

Chuang, C.-H.↗

3D Material Response Analysis of PICA Pyrolysis Experiments

Primarily interested in improving ablation modeling for use in inverse reconstruction of flight environments on ablative heat shields. Ablation model is essentially a component of the heat flux sensor, so model uncertainties lead to measurement uncertainties. Non-equilibrium processes have been known to be significant in low density ablators for a long time, but increased accuracy requirements of the reconstruction process necessitates incorporating this physical effect. Attempting to develop a pyrolysis model for implementation in material response based on the PICA data produced by Bessire and Minton. Pyrolysis gas species molar yields as a function of temperature and heating rate. Several problems encountered while trying to fit Arrhenius models to the data led to further investigation of the experimental setup.

Oliver, Brandon A.↗

Modeling the Proton Radiation Belt With Van Allen Probes Relativistic Electron-Proton Telescope Data

An empirical model of the proton radiation belt is constructed from data taken during 2013-2017 by the Relativistic Electron-Proton Telescopes on the Van Allen Probes satellites. The model intensity is a function of time, kinetic energy in the range 18-600 megaelectronvolts, equatorial pitch angle, and L shell of proton guiding centers. Data are selected, on the basis of energy deposits in each of the nine silicon detectors, to reduce background caused by hard proton energy spectra at low L. Instrument response functions are computed by Monte Carlo integration, using simulated proton paths through a simplified structural model, to account for energy loss in shielding material for protons outside the nominal field of view. Overlap of energy channels, their wide angular response, and changing satellite orientation require the model dependencies on all three independent variables be determined simultaneously. This is done by least squares minimization with a customized steepest descent algorithm. Model uncertainty accounts for statistical data error and systematic error in the simulated instrument response. A proton energy spectrum is also computed from data taken during the 8 January 2014 solar event, to illustrate methods for the simpler case of an isotropic and homogeneous model distribution. Radiation belt and solar proton results are compared to intensities computed with a simplified, on-axis response that can provide a good approximation under limited circumstances.

Selesnick, R. S.↗

Multivariable control of the Space Shuttle Remote Manipulator System using linearization by state feedback

This thesis develops and demonstrates an approach to nonlinear control system design using linearization by state feedback. The design provides improved transient response behavior allowing faster maneuvering of payloads by the SRMS. Modeling uncertainty is accounted for by using a second feedback loop designed around the feedback linearized dynamics. A classical feedback loop is developed to provide the easy implementation required for the relatively small on board computers. Feedback linearization also allows the use of higher bandwidth model based compensation in the outer loop, since it helps maintain stability in the presence of the nonlinearities typically neglected in model based designs.

Gettman, Chang-Ching LO↗

Early Operations Flight Correlation of the Lunar Laser Communications Demonstration (LLCD) on the Lunar Atmosphere and Dust Environment Explorer (LADEE)

The Lunar Atmosphere and Dust Environment Explorer (LADEE) mission launched on September 7, 2013 with a one month cruise before lunar insertion. The LADEE spacecraft is a power limited, octagonal, composite bus structure with solar panels on all eight sides with four vertical segments per side and 2 panels dedicated to instruments. One of these panels has the Lunar Laser Communications Demonstration (LLCD), which represents a furthering of the laser communications technology demonstration proved out by the Lunar Reconnaissance Orbiter (LRO). LLCD increases the bandwidth of communication to and from the moon with less mass and power than LROs technology demonstrator. The LLCD Modem and Controller boxes are mounted to an internal cruciform composite panel and have no dedicated radiator. The thermal design relies on power cycling of the boxes and radiation of waste heat to the inside of the panels, which then reject the heat when facing cold space. The LADEE mission includes a slow roll and numerous attitudes to accommodate the challenging thermal requirements for all the instruments on board. During the cruise phase, the internal Modem and Controller avionics for LLCD were warmer than predicted by more than modeling uncertainty would suggest. This caused concern that if the boxes were considerably warmer than expected while off, they would also be warmer when operating and could limit the operational time when in lunar orbit. The thermal group at Goddard Space Flight Center evaluated the models and design for these critical avionics for LLCD. Upon receipt of the spacecraft models and audit was performed and data was collected from the flight telemetry to perform a sanity check of the models and to correlate to flight where possible. This paper describes the efforts to correlate the model to flight data and to predict the thermal performance when in lunar orbit and presents some lessons learned.

LADEE↗

Probable LAGEOS contributions to a worldwide geodynamics control network

The paper describes simulations performed on the contributions which LAGEOS laser ranging data can make to the establishment of a worldwide geodynamics control network. A distribution of 10 fixed ranging stations was assumed for most of the calculations, and a single 7-day arc was used, measurements assumed to be made every 10 minutes in order to avoid artificial reductions in the uncertainties due to oversampling. Computer simulations were carried out in which the coordinates of the stations and improvements in the gravity field coefficients were solved for simultaneously. It is suggested that good accuracy for station coordinates can be expected, even with the present gravity field model uncertainties, if sufficient measurement accuracy is achieved at a reasonable distribution of stations. Further, it is found that even 2-cm range measurement errors would be likely to be the main source of station coordinate errors in retrospective analyses of LAGEOS ranging results five or six years from now.

Bender, P. L.↗

Evaluation of Automotive Grade Resistors for Space Flight

Over the past decade, electronic, electrical, and electromechanical (EEE) parts for space applications have undergone significant changes, largely driven by CubeSat and commercial space developers pushing the boundaries on the utilization of commercial parts in space. Global product shortages and shipping delays are still impacting space flight project deadlines. Many projects have turned to automotive grade resistors as an alternate to their MILSPEC counterparts to fulfill requirements. In addition, automotive grade resistors may offer designers a wider range of parts to consider. A recent NASA study recommended the use of high-volume manufactured commercial components for space applications provided these components show evidence of stringent fabrication controls and thorough reliability monitoring practices. Automotive grade components have stringent qualification requirements per the Automotive Electronic Council (AEC). However, the end user usually does not have insight into the practices the manufacturer may use to reduce/eliminate infant mortality nor for compliance to all datasheet specifications. Screening, Life and Accelerated Life testing on a set of standard automotive-grade chip resistors is proposed to evaluate the reliability of these components. Requirements from both the AEC-Q (Automotive Electronic Council Qualification) and EEE-INST-002 (Instructions for EEE Parts Selection, Screening, Qualification, and Derating) for resistors is compared and discussed. The resistors have been tested by using a modified methodology from EEEINST-002 to evaluate their reliability for space flight projects. The findings of this study indicate that the underlying degradation mechanisms at rated temperature and power are best represented by power law models with a fitted exponent between 0 and 1. A linear model is more conservative which compensates for potential model uncertainty given the wide range of design and materials used in automotive resistors, while still providing useful long-term resistance drift estimates. No electrical anomalies or failures were observed throughout the 1000-hour Life Tests other than small in tolerance resistance drift aging. Degradation models were utilized to quantify and extrapolate the long-term resistance drift under operating conditions for the components. The models demonstrated that some automotive-grade resistors are likely to operate 10 years at nominal usage conditions while others might fail earlier.

Zainab Abdullahi↗