Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Thermal Cross Sections”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Aligned Boron Nitride Nanotube Reinforced Polyethylene Nanocomposite for Space Radiation Shielding

With NASA’s Artemis program aiming to establish a human presence on the Moon and eventually on Mars, protecting astronauts from radiation is necessary. Flight-heritage materials, like those with high hydrogen content, such as polyethylene (PE), have proven to be effective radiation shields. This is due to hydrogen’s high charge-to-mass ratio, low secondary radiation production, efficient energy absorption, and high cross-section, which increases the probability of particle interactions to slow or stop ionized particles. Boron nitride nanotubes (BNNTs) and other boron-rich materials offer more effective thermal neutron radiation-stopping capabilities due to their high cross-section and neutron absorption properties. BNNTs also enhance the mechanical properties of radiation shielding material due to their high strength-to-weight ratios. However, integrating high volumes of nanotubes in a matrix without defects presents significant manufacturing challenges. To address this, a bulk nanocomposite laminate fabricating technique, involving synthesizing millimeter-long vertically aligned BNNTs, densifying the nanotubes to high-volume fractions, and infusing the nanotubes with PE while applying heat and pressure was utilized to fabricate the BNNT-PE nanocomposite that was tested for its radiation shielding properties at NASA Langley Research Center’s neutron radiation exposure lab. Results from these experiments will be discussed in the presentation.

Palak B Patel↗
NASA NTRS1979

Energetic binary collisions in rare gas plasmas

Calculations have been made of cross sections for energy and momentum transfer in binary collisions between like pairs of Ar, Kr, and Xe atoms in the energy range from about 1 to 1000 eV. These calculations were made using a classical model with pair interaction potentials for the rare gases developed from experimental sources, e.g., investigations of specific heats, viscosities, solid-state parameters, and scattering data. Cross sections in this energy range have not been available. The cross sections exhibit a rapid decrease from accepted values at thermal energies as the interaction energy increases. This behavior can be used to understand directed beam propagation limits as well as particle propagation within a plasma. Experimental data have also been fit to a theoretical expression for the Ar resonance charge exchange cross section over the same energy range.

Robinson, R. S.↗
NASA NTRS1977

Spectrum of the Kleinmann-Low nebula from 29 to 125 micrometers

The infrared spectrum of the Kleinmann-Low nebula in M42 has been measured from 80 to 350 kaysers (approximately 29 to 125 microns) with a Michelson interferometer aboard the NASA Kuiper Airborne Observatory. The frequency spectrum peaks at about 185 kaysers. A simple model of the emission implies that the temperature is in the range 70-95 K and that the optical depth is at least 0.2 at the peak frequency. A possible absorption is seen at about 176 kaysers. Thermal emission by dust at a temperature of 71 K, with the absorption cross section proportional to frequency, provides a good fit to the data. Other thermal-emission models can also fit the spectrum. The data are compared with previous broad-band measurements. Upper limits are placed on expected line emission from the surrounding H II region at the position of the nebula.

Erickson, E. F.↗
NASA NTRS1985

The slab geometry laser. II - Thermal effects in a finite slab

This paper presents two methods for calculating the thermally induced stress, focusing, and depolarization in a pumped zigzag-slab solid-state laser. A computer program capable of detailed calculations of thermal effects in the general case is described. An approximate analysis of slab thermal effects in many cases allows calculation of these effects without use of the computer model directly. The analysis predicts that slabs of square cross section can be designed to have low depolarization and thermal focusing compared to Nd:YAG laser rods.

Kane, T. J.↗
DOE OSTI2021

The impact of new d(p,γ)3 rates on Big Bang Nucleosynthesis

We consider the effect on Big Bang Nucleosynthesis (BBN) of new measurements of the d(p,γ) 3 He cross section by the LUNA Collaboration. These have an important effect on the primordial abundance of D/H which is also sensitive to the baryon density at the time of BBN. We have re-evaluated the thermal rate for this reaction, using a world average of cross section data, which we describe with model-independent polynomials; our results are in good agreement with a similar analysis by LUNA. We then perform a full likelihood analysis combining BBN and Planck cosmic microwave background (CMB) likelihood chains using the new rate combined with previous measurements and compare with the results using previous rates. Concordance between BBN and CMB measurements of the anisotropy spectrum using the old rates was excellent. The predicted deuterium abundance at the Planck value of the baryon density was (D/H) BBN+CMB old = (2.57 ± 0.13) × 10 –5 which can be compared with the value determined from quasar absorption systems (D/H) obs = (2.55 ± 0.03) × 10 –5 . Using the new rates we find (D/H) BBN+CMB = (2.51 ± 0.11) × 10 –5 . We thus find consistency among BBN theory, deuterium and 4He observations, and the CMB, when using reaction rates fit in our data-driven approach. We also find that the new reaction data tightens the constraints on the number of relativistic degrees of freedom during BBN, giving the effective number of light neutrino species N ν = 2.880 ± 0.144 in good agreement with the Standard Model of particle physics. Lastly, we note that the observed deuterium abundance continues to be more precise than the BBN+CMB prediction, whose error budget is now dominated by d(d,n) 3 He and d(d,p) 3 H.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Use of Nucleating Agent NA11 in the Preparation of Polyvinylidene Fluoride Dual-Layer Hollow Fiber Membranes

Polyvinylidene fluoride (PVDF) dual-layer hollow fiber membranes were simultaneously fabricated by thermally induced phase separation (TIPS) and non-solvent induced phase separation (NIPS) methods using a triple orifice spinneret (TOS) for water treatment application. The support layer was prepared from a TIPS dope solution, which was composed of PVDF, gamma-butyrolactone (GBL), and N-methyl-2-pyrrolidone (NMP). The coating layer was prepared from a NIPS dope solution, which was composed of PVDF, N,N-dimethylacetamide (DMAc), and polyvinylpyrrolidone (PVP). In order to improve the mechanical strength of the dual-layer hollow fiber, a nucleating agent, sodium 2,2'-methylene bis-(4,6-di-tert-butylphenyl) phosphate (NA11), was added to the TIPS dope solution. The performance of the membrane was evaluated by surface and cross-sectional morphology, water flux, mechanical strength, and thermal property. Our results demonstrate that NA11 improved the mechanical strength of the PVDF dual-layer hollow fiber membranes by up to 42%. In addition, the thickness of the coating layer affected the porosity of the membrane and mechanical performance to have high durability in enduring harsh processing conditions.

36 MATERIALS SCIENCE↗
NASA NTRS1981

Heat Capacity Mapping Mission (HCMM) program: Study of geological structure of Sicily and other Italian areas

The usefulness of thermal inertia mapping in discriminating geolithological units was investigated using Sardinia and the Gulf of Orosei as test sites. Software designed for LANDSAT data were modified and improved for HCMM tapes. A first attempt was made to compare the geological cross section, the topography, the IR radiance, and the thermal inertia along selected profiles of the test site. Thermal inertia profiles appear smoothed in comparison with the thermal radiance. The lowest apparent thermal inertia (ATI) was found on granitic and basaltic outcrops where their image is of sufficient extent, while ATI is higher on carbonatic and dolomitic or moist deposits. Almost every fault is marked by a jump of ATI, the interval being sometimes of the order of one pixel. This seems to demonstrate the ability of ATI to detect contacts or tectonically disturbed zones with a good resolution. It seems more difficult to measure the differences in ATI between homogeneous materials having different lithology. Ground surveys conducted and a simulation model of diurnal temperatures of rocks having different thermal inertia are discussed.

Cassinis, R.↗
NASA NTRS1993

Induced activation study of LDEF

Analysis of the induced radioactivity of the Long Duration Exposure Facility (LDEF) is continuing with extraction of specific activities for various spacecraft materials. Data and results of activation measurements from eight facilities are being collected for interpretation at Eastern Kentucky University and NASA/Marshall Space Flight Center. The major activation mechanism in LDEF components is the proton flux in the South Atlantic Anomaly (SAA). This flux is highly anisotropic, and could be sampled by taking advantage of the gravity-gradient stabilization of the LDEF. The directionally-dependent activation due to these protons was clearly observed in the data from aluminum experiment tray clamps (reaction product Na-22), steel trunnions (reaction product Mn-54 and others) and is also indicated by the presence of a variety of nuclides in other materials. A secondary production mechanism, thermal neutron capture, was observed in cobalt, indium, and tantalum, which are known to have large capture cross sections. Experiments containing samples of these metals and significant amounts of thermalizing low atomic number (Z) material showed clear evidence of enhanced activation of Co-60, In-114m, and Ta-182. Other mechanisms which activate spacecraft material that are not as easily separable from SAA proton activation, such as galactic proton bombardment and secondary production by fast neutrons, are being investigated by comparison to radiation environmental calculations. Deviations from one-dimensional radiation models indicate that these mechanisms are more important at greater shielding depths. The current status of the induced radioactivity measurements as of mid-year 1992 are reviewed. Specific activities for a number of materials which show SAA effects and thermal neutron capture are presented. The results for consistency by combining data from the participating institutions is also examined.

Harmon, B. A.↗
DOE OSTI2021

A nodal transport method for coupled fast-thermal reactor analysis

We report that for efficient core analyses of coupled fast-thermal reactors, a new deterministic method has been developed based on the variational nodal transport method of VARIANT. A new multigroup cross section generation procedure was devised by combining Monte Carlo lattice calculations for thermal assemblies and the two-step procedure of the MC 2 -3 code for fast assemblies. To reduce assembly homogenization errors in nodal transport calculations, a new nodal equivalence method was developed based on the partial current discontinuity factor (PCDF) and incorporated in VARIANT. A practical procedure to calculate PCDFs with fixed source supercell calculations was also devised. The performance of the proposed method was investigated using a test problem derived from the versatile coupled test reactor (VCTR) design. The new procedure produced multigroup cross sections accurately for all assemblies. VARIANT transport calculations with PCDFs produced accurate multiplication factor and power distribution compared to reference Serpent-2 Monte Carlo solutions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Synthesis and Thermal Oxidation Resistance of Boron-Rich Boron–Carbide Material

A boron-rich boron–carbide material (B4+δC) was synthesized by spark plasma sintering of a ball-milled mixture of high-purity boron powder and graphitic carbon at a pressure of 7 MPa and a temperature of 1930 °C. This high-pressure, high-temperature synthesized material was recovered and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, Vickers hardness measurements, and thermal oxidation studies. The X-ray diffraction studies revealed a single-phase rhombohedral structure (space group R-3m) with lattice parameters in hexagonal representation as a = 5.609 ± 0.007 Å and c = 12.082 ± 0.02 Å. The experimental lattice parameters result in a value of δ = 0.55, or the composition of the synthesized compound as B4.55C. The high-resolution scans of boron binding energy reveal the existence of a B-C bond at 188.5 eV. Raman spectroscopy reveals the existence of a 386 cm−1 vibrational mode representative of C-B-B linear chain formation due to excess boron in the lattice. The measured Vickers microhardness at a load of 200 gf shows a high hardness value of 33.8 ± 2.3 GPa. Thermal gravimetric studies on B4.55C were conducted at a temperature of 1300 °C in a compressed dry air environment, and its behavior is compared to other high-temperature ceramic materials such as high-entropy transition metal boride. The high neutron absorption cross section, high melting point, high mechanical strength, and thermal oxidation resistance make this material ideal for applications in extreme environments.

36 MATERIALS SCIENCE↗
NASA NTRS1994

Modeling thermal infrared (2-14 micrometer) reflectance spectra of frost and snow

Existing theories of radiative transfer in close-packed media assume that each particle scatters independently of its neighbors. For opaque particles, such as are common in the thermal infrared, this assumption is not valid, and these radiative transfer theories will not be accurate. A new method is proposed, called 'diffraction subtraction', which modifies the scattering cross section of close-packed large, opaque spheres to account for the effect of close packing on the diffraction cross section of a scattering particle. This method predicts the thermal infrared reflectance of coarse (greater than 50 micrometers radius), disaggregated granular snow. However, such coarse snow is typically old and metamorphosed, with adjacent grains welded together. The reflectance of such a welded block can be described as partly Fresnel in nature and cannot be predicted using Mie inputs to radiative transfer theory. Owing to the high absorption coefficient of ice in the thermal infrared, a rough surface reflectance model can be used to calculate reflectance from such a block. For very small (less than 50 micrometers), disaggregated particles, it is incorrect in principle to treat diffraction independently of reflection and refraction, and the theory fails. However, for particles larger than 50 micrometers, independent scattering is a valid assumption, and standard radiative transfer theory works.

Wald, Andrew E.↗
DOE OSTI2021

Evaluation of Low-Pressure-Sintered Multi-Layer Substrates for Medium-Voltage SiC Power Modules: Preprint

Direct-bonded aluminum (DBA) multi-layer substrates have been fabricated using low-pressure silver sintering. These multi-layer substrates can be used to reduce the peak electric field strength inside power modules. This benefit is particularly important for medium-voltage silicon carbide (SiC) MOSFETs due to their higher operating voltages. The voiding content and defect density of the bond used to create the multi-layer substrate stackup is critical to the thermal performance and reliability of the power module. This work two low-pressure-assisted sintering techniques; one using nano-silver preform and the other using nano-silver paste to bond 23 mm by 49 mm DBA substrates. Scanning acoustic microscopy (C-SAM) is used to evaluate the bond quality after sintering. To evaluate the reliability of the sintered multi-layer substrates, passive thermal cycling from –40 °C to 200 °C was performed. Cross-sections were cut at pre-determined intervals and imaged with Scanning Electron Microscopy (SEM). After 1,000 thermal cycles, minor cracking was observed, but no failures have occurred.

28 EE - Advanced Manufacturing Office (EE-5A)↗
DOE OSTI2021

Critical roles of pores and moisture in sustainable nanocellulose-based super-thermal insulators

In a recent report in Matter, Bergström and co-workers describe a novel thermal transport behavior that subverts this assumption of porous materials. In their work, the authors describe a nanocellulose-based foam that features ultrahigh porosity (> 99.6%) and aligned µm-scale pores (10–100 µm) whose radial thermal conductivity (i.e., perpendicular to the pore alignment) is close to that of free air in the dry state. Furthermore, the radial thermal conductivity of the cellulose-based foam can be reduced to ~14 mW/(m·K) when the relative humidity is ~35%. Super-thermal insulators, which demonstrate a thermal conductivity below that of stationary air (~ 25 mW/(m·K), 20 ºC, 1.0 atm), are needed to minimize heat loss in various applications (e.g., buildings, thermal energy storage tanks, cold chain packaging, etc.) to mitigate the energy crisis and reduce carbon emissions. Introducing pores into a material is a facile and effective way to achieve low thermal conductivity as pores can suppress thermal transport through solids by reducing the cross-sectional area and increasing the tortuosity of the heat transfer pathway. In porous structures there are two kinds of pores: open and closed. While increased porosity can reduce heat conduction through solids with an open porous structure, the improved gas conduction creates a competing effect that simultaneously elevates the heat transfer. Therefore, the thermal conductivity of a material with µm-scale open pores is usually larger than that of stationary air. Reducing the pore size to less than the mean free path of air (~ 70 nm, 20 ºC, 1.0 atm) can effectively reduce gas conduction, enabling the material to achieve a thermal conductivity below that of stationary air. However, high cost of the nanosized raw materials and time-consuming fabrication processes limit the large-scale applications of nanoporous thermal insulators. Meanwhile, closed pores can block heat transport only through the continuous gas phase. As a result, the thermal conductivity of a closed porous structure can theoretically be much smaller than that of stationary air if the solid conduction can also be suppressed by (1) lowering the solid content of the material, (2) reducing the thermal conductivity of the building blocks of the material, and/or (3) increasing interfacial thermal resistance between neighboring building blocks. Most processes used to generate porous structures (e.g., supercritical drying, freeze drying) involve a solvent that escapes the material. Therefore, it is difficult to create pores and isolate them simultaneously, preventing the fabrication of super-thermal insulators with closed pores.

36 MATERIALS SCIENCE↗
NASA NTRS1992

Experimental observation of the influence of furnace temperature profile on convection and segregation in the vertical Bridgman crystal growth technique

Azulene-doped naphthalene was directionally solidified during the vertical Bridgman-Stockbarger technique. Doping homogeneity and convection were determined as a function of the temperature profile in the furnace and the freezing rate. Convection velocities were two orders of magnitude lower when the temperature increased with height. Rarely was the convection pattern axisymmetric, even though the temperature varied less than 0.1 K around the circumference of the growth ampoule. Correspondingly the cross sectional variation in azulene concentration tended to be asymmetric, especially when the temperature increased with height. This cross sectional variation changed dramatically along the ingot, reflecting changes in convection presumably due to the decreasing height of the melt. Although there was large scatter and irreproducibility in the cross sectional variation in doping, this variation tended to be least when the growth rate was low and the convection was vigorous. It is expected that compositional variations would also be small at high growth rates with weak convection and flat interfaces, although this was not investigated in the present experiments. Neither rotation of the ampoule nor deliberate introduction of thermal asymmetries during solidification had a significant influence on cross sectional variations in doping. It is predicted that slow directional solidification under microgravity conditions could produce greater inhomogeneities than on Earth. Combined use of microgravity and magnetic fields would be required to achieve homogeneity when it is necessary to freeze slowly in order to avoid constitutional supercooling.

Neugebauer, G. T.↗
DOE OSTI2021

Griffin Software Development Plan

Griffin is a MOOSE-based reactor physics application for advanced reactor multiphysics modeling and simulation. The application is developed in a consistent multiphysics environment with strong software quality assurance. Griffin inherited most of the capabilities of MAMMOTH/Rattlesnake and is adopting the capabilities from PROTEUS that are needed in the code. The toolset includes a variety of deterministic radiation transport solvers for fixed source, k-eigenvalue, ad-joint, and subcritical multiplication, as well as transient solvers for point-kinetics, improved quasi-static, and spatial dynamics. The code contains the cross-section preparation capabilities applicable to fast and thermal reactors, including TRISO-fueled reactors. Core management capabilities include core performance, fuel depletion and shuffling, equilibrium core calculation, pebble-bed reactor run-in and equilibrium core, molten-salt reactor delayed neutron precursor drift, and control rod and drum movement with cusping correction. This software development plan presents the current and future capabilities and features in Griffin for the design and analysis of non-light-water reactor systems in steady-state and transient conditions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

DOE/NNSA Nuclear Criticality Safety Program – Brief Overview [Slides]

This presentation discusses nuclear data measurements and evaluation work for the NCSP. The objective of the NCSP is to provide measured and evaluated thermal, resonance, unresolved resonance, and fast region cross section data to address the priority NCSP nuclear data needs. It also discusses its vision which is to address multiple Nuclear Data 5- and 10-year goals and attributes identified in the NCSP. The intended final product is for rigorous ENDF/B evaluations to be produced from cross section measurements and analyses. It also discusses NCSP integral experiments and differential experiments in addition to NCSP support of SCALE in the future.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Assessment and validation of NEAMS tools for high-fidelity multiphysics transient modeling of microreactors: Application of NEAMS codes to perform multiphysics modeling analyses of micro-reactor concepts

The NEAMS Multiphysics Applications team aims at providing assessment of code useability and functionality for microreactor design and analyses, together with demonstration of their capabilities to properly capture the steady-state and time-dependent behavior of different microreactor concepts. In FY-24, significant progress was achieved in improving multi-physics models of several microreactors systems: HP-MR, GC-MR and KRUSTY. These efforts focused on solving more complex multiphysics problems enabled by enhanced tools capability, verifying and validating results obtained, providing feedback to developers for suggested improvements, and sharing these models to facilitate user training. A series of new multiphysics transients were completed on the HP-MR (using Griffin/BISON/Sockeye) with core startup transient, control drum inadvertent rotation accident, and hydrogen leakage from hydride moderator (also including SWIFT). On the GC-MR, a new full-core model was developed and analyzed through a series of new multiphysics (Griffin/BISON/SAM) transients to simulate moderator leakage (also including SWIFT), flow blockage and coolant depressurization. Additional and updated TRISO failure analyses were completed on the HP-MR unit-cell and GC-MR assembly models leveraging improved TRISO modeling capabilities. The amount of SiC failure following accidental transients at end-of-life was null. However, GC-MR assembly TRISO analysis highlighted Pd penetration rate can be problematic and may require design changes on the studied microreactor concept. The neutronics discrepancies observed on the KRUSTY model in previous years were resolved using hybrid set of Monte Carlo/Deterministic cross-sections. The multiphysics (Griffin neutronics / BISON thermal-mechanics) 15₵ insertion transient simulation displayed good agreement when comparing with experimental data. Initial modeling of the 30 ₵ reactivity insertion also displays promising results. Such close agreement provides important validation data that can be leveraged by the NEAMS program and by microreactor vendors to support licensing of their technology. Finally, important experience was gathered with the NEAMS tools leading to several user feedback shared with tools developers, especially with regards to MOOSE mesh generator and Griffin. This project led to many publications demonstrating modeling capabilities, and to three models shared on the Virtual Test Bed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗