Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TRAJECTORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Gravity-Assist Trajectories to the Ice Giants: An Automated Method to Catalog Mass-or Time-Optimal Solutions

This work presents an automated method of calculating mass (or time) optimal gravity-assist trajectories without a priori knowledge of the flyby-body combination. Since gravity assists are particularly crucial for reaching the outer Solar System, we use the Ice Giants, Uranus and Neptune, as example destinations for this work. Catalogs are also provided that list the most attractive trajectories found over launch dates ranging from 2024 to 2038. The tool developed to implement this method, called the Python EMTG Automated Trade Study Application (PEATSA), iteratively runs the Evolutionary Mission Trajectory Generator (EMTG), a NASA Goddard Space Flight Center in-house trajectory optimization tool. EMTG finds gravity-assist trajectories with impulsive maneuvers using a multiple-shooting structure along with stochastic methods (such as monotonic basin hopping) and may be run with or without an initial guess provided. PEATSA runs instances of EMTG in parallel over a grid of launch dates. After each set of runs completes, the best results within a neighborhood of launch dates are used to seed all other cases in that neighborhood---allowing the solutions across the range of launch dates to improve over each iteration. The results here are compared against trajectories found using a grid-search technique, and PEATSA is found to outperform the grid-search results for most launch years considered.

Hughes, Kyle M.↗

The Viability of Trajectory Analysis for Diagnosing Dynamical and Chemical Influences on Ozone Concentrations in the UTLS

The viability of trajectory analysis for diagnosing the interplay between chemistry and dynamics is investigated by comparing ozone mixing ratios modelled using air-parcel pathways to values observed along flight tracks during ATTREX (Airborne Tropical TRopopause EXperiment). Trajectories are initiated at the locations of ozone observations and tracked backward in time to their sources at termini of backward trajectories. The modelled values of ozone utilize 3-dimensional analysis fields from WACCM (Whole Atmosphere Community Climate Model) (a chemical-climate model with dynamical fields nudged towards MERRA (Modern-Era Retrospective Analysis and Research Applications) reanalysis) and ERA-interim (product of ECMWF - the European Centre for Medium-Range Weather Forecasts) to determine source mixing ratios with chemical production and loss terms derived from the ozone chemistry used in WACCM. A statistical base of modelled ozone is constructed with 6 trajectory platforms (adiabatic, diabatic, and kinematic forced by ERA-interim and MERRA), two chemical models (WACCM chemistry and no chemistry), and 4 trajectory lengths (5, 10, 20, and 30 days). Linear regression is employed to separate systematic errors from random errors and to characterize the impact of source mixing ratios, path length, vertical motion, and chemistry on modelled ozone errors. Errors in the analysis ozone fields are large, if not dominant, contributors to model error. Random errors are particularly large for point-by-point comparisons, however averaging over 800 km (75 minutes) flight segments substantially reduces random error and exposes systematic errors. Of the two analysis ozone data sets, WACCM, which incorporates detailed chemistry, provides the smaller systematic errors while ERA-interim, which has crude chemistry but assimilates observational data, has the smaller random errors. Of the different trajectory platforms, adiabatic calculations produce the smaller random errors (irrespective of the use of chemistry) but both vertical motion and chemistry are required to optimally reduce systematic errors. These results suggest that meaningful analysis of dynamical and chemical interactions that control ozone mixing ratios are viable on spatial scales larger than a few reanalysis grid spaces, that errors in the analyzed ozone data sets are large but not prohibitively so, and that vertical velocities and heating rates from reanalysis data, while problematic, contain useful information [on the ozone concentrations in the UTLS (Upper Troposphere/Lower Stratosphere)].

ozone↗

Computational Approaches to Simulation and Optimization of Global Aircraft Trajectories

This study examines three possible approaches to improving the speed in generating wind-optimal routes for air traffic at the national or global level. They are: (a) using the resources of a supercomputer, (b) running the computations on multiple commercially available computers and (c) implementing those same algorithms into NASA’s Future ATM Concepts Evaluation Tool (FACET) and compares those to a standard implementation run on a single CPU. Wind-optimal aircraft trajectories are computed using global air traffic schedules. The run time and wait time on the supercomputer for trajectory optimization using various numbers of CPUs ranging from 80 to 10,240 units are compared with the total computational time for running the same computation on a single desktop computer and on multiple commercially available computers for potential computational enhancement through parallel processing on the computer clusters. This study also re-implements the trajectory optimization algorithm for further reduction of computational time through algorithm modifications and integrates that with FACET to facilitate the use of the new features which calculate time-optimal routes between worldwide airport pairs in a wind field for use with existing FACET applications. The implementations of trajectory optimization algorithms use MATLAB, Python, and Java programming languages. The performance evaluations are done by comparing their computational efficiencies and based on the potential application of optimized trajectories. The paper shows that in the absence of special privileges on a supercomputer, a cluster of commercially available computers provides a good option for computing wind-optimal trajectories for national and global air traffic system studies.

Ng, Hok K.↗

Understanding Extended Projected Profile (EPP) Trajectory Error Using a Medium-Fidelity Aircraft Simulation

A critical component of Trajectory-Based Operations is the ability for a consistent and accurate 4-dimensional trajectory to be shared and synchronized between airborne and ground systems as well as amongst various ground automation systems. The Aeronautical Telecommunication Network—Baseline 2 standard defines the Extended Projected Profile (EPP) trajectory that can be sent via Automatic Dependent Surveillance-Contract from an aircraft to ground automation. The EPP trajectory message contains a representation of the reference trajectory from an aircraft’s Flight Management System (FMS). In this work, a set of scenarios were run in a medium-fidelity aircraft and FMS simulation to perform an initial characterization of EPP trajectory errors under a given set of conditions. The parameters investigated were the route length, route type, wind magnitude error, wind direction error, and with and without a required time-of-arrival constraint.

Guerreiro, Nelson M.↗

Keplerian Analysis for Versatile Evaluation of Arbitrary Trajectories

Designing interplanetary missions is an iterative process, with a tight coupling between mission analysis and vehicle design. The ability to simultaneously process both analyses early on can provide significant benefits in both the concept formulation and in overall mission feasibility. To implement such a simultaneous analysis process, there is a need to model interplanetary trajectories rapidly while maintaining an acceptable level of fidelity. Many simple patched conics tools make too many assumptions to satisfactorily address all relevant constraints and objectives, while full-fidelity trajectory design tools often require more time and expertise than is available in early conceptual studies. Hence, some form of middle-ground modeling tool would provide value. This paper introduces the development of such a tool using Python. This tool, Keplerian Analysis for Versatile Evaluation of Arbitrary Trajectories (KAVEAT), implements a patched conics method that enforces continuity of state (time, mass, position, velocity) through all transitions between various spheres of influence on the trajectory. The trajectory is constructed in an object-oriented manner, dynamically assembling unique maneuvers such as departure burns, heliocentric transfers (ballistic or with electric propulsion), and planetary flybys (powered or unpowered). Each maneuver has its own specific set of basic inputs needed to define it. The tool then takes these defined maneuvers, strings them together creating all the interdependencies required, and solves for the ideal trajectory using a gradient-based optimizer.

Katherine T McBrayer↗

An Algorithm for Trajectory Generation in Redundant Manipulators with Joint Transmission Accommodation

Trajectory generation for manipulators involves generating incremental updates of joint variables to achieve a desired end–effector motion. The Jacobian matrix maps incremental joint motion to incremental end–effector motion in a linear fashion and is typically used in manipulator trajectory generation algorithms. In the case of a redundant manipulator, the Jacobian matrix is not square or invertible and therefore algorithms based on pseudoinverses and their variations are commonly used for trajectory generation. These methods either are computationally not efficient or do not utilize all the joints in motion generation and therefore do not completely exploit the redundancy of the manipulator. The method presented in this paper is a simple method that maximizes transmission of all joint variables onto a desired end–effector motion trajectory. The method is based on aligning the null–space of an augmented Jacobian matrix with the path of the desired end–effector motion, from which a linear combination of joints that projects fully onto the desired end–effector trajectory is obtained. In this manner, all joints of the redundant manipulator are used to generate the end–effector trajectory accommodating the ability of each joint in terms of its motion transmission.

Ravani, Bahram↗

Designing Trajectories Resilient to Missed Thrust Events Using Expected Thrust Fraction

With the adoption of efficient low-thrust propulsion methods, the probability of a missed thrust event occurring has become a significant concern for short and long- duration missions. If the missed thrust events take place during a critical portion of the trajectory, the mission can be compromised. Therefore, it is essential to de- velop trajectories that are resilient to missed thrust events. This paper investigates the use of expected thrust fraction, which embeds the stochastic nature of missed thrust events into a deterministic optimal control problem. The performance of trajectories designed using expected thrust fraction is compared with traditionally designed trajectories to measure changes in resiliency to missed thrust events. In this investigation, trajectories designed using expected thrust fraction arrive with a median lateness half that of traditionally designed trajectories. Using expected thrust fraction can help astrodynamicists mitigate risks posed by the use of low- thrust propulsion.

Laipert, Frank E.↗

Trajectory Optimization Methods and Applications at NASA Goddard

The process of spacecraft trajectory design frequently incorporates an optimization step in which one or more objectives, such as propellant consumption or time of flight, is minimized. Optimization is especially crucial for low-thrust mission design, due to the need to specify a thrust vector at every instant in time along a trajectory. At NASA's Goddard Space Flight Center (GSFC) a number of open-source tools have been developed for spacecraft trajectory optimization that utilize direct shooting and collocation methods. These tools have been effectively applied to cislunar, libration point, and interplanetary mission design for the Lunar IceCube, SWFO, and DAVINCI missions, among others. This presentation outlines the theory underlying these optimization tools along with the details of their application to several trajectory design problems, with a focus on the Lunar IceCube (LIC) mission. The LIC mission required a low-thrust trajectory from a high-energy deployment state to a lunar orbit, and its limited control authority necessitated the use of optimization tools and low-energy trajectory design techniques. The tools discussed demonstrate how the use of optimization methods expands mission capabilities and enables transformational science.

Robert Pritchett↗

Trajectory Reconstruction of the Low-Earth Orbit Flight Test of an Inflatable Decelerator

The Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) project conducted a flight test of a 6m inflatable aeroshell. The LOFTID test article was a secondary payload on an Atlas V launcher that carried the Joint Polar Satellite System-2 (JPSS-2) as its primary payload. The vehicle launched on November 10th, 2022. After reaching orbit, the LOFTID test article inflated the aeroshell, separated from the upper stage on an entry trajectory, and entered the atmosphere to splash down in the Pacific Ocean under parachutes. The test concept of operations is shown in Figure 1. The test article was instrumented with a variety of sensors to be used for post-flight evaluation of vehicle performance. Data from one of the key sensors for trajectory reconstruction, the Inertial Measurement Unit (IMU), was not captured in the data recorder due to a malfunction. Data from the nose cone mounted Flush Air Data Sensing (FADS) system were successfully acquired. The layout of the FADS sensors and the measured pressures during atmospheric entry are shown in Figure 2. The FADS data were combined with a Newtonian flow pressure model [1, 2] to produce estimates of the atmospheric relative trajectory. A Mach number anchoring technique given in [2] was used to stabilize estimates in high speed flight conditions. Since no IMU data were available, a trajectory simulation was used to provide the Mach number time history. The resulting estimates of the atmospheric-relative trajectory are shown in Figures 3. Given the loss of the IMU data, alternate methods for trajectory reconstruction are being explored. One approach under investigation is the use of the on-board video recorder data to be analyzed to reconstruct attitude motion. This approach is currently under investigation and will be reported on in the final paper. The Newtonian flow pressure model for the FADS analysis will also be updated with a CFD-based pressure model.

Christopher D Karlgaard↗

Trajectory Reconstruction of the Low-Earth Orbit Flight Test of an Inflatable Decelerator

The Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) project conducted a flight test of a 6m inflatable aeroshell. The LOFTID test article was a secondary payload on an Atlas V launcher that carried the Joint Polar Satellite System-2 (JPSS-2) as its primary payload. The vehicle launched on November 10th, 2022. After reaching orbit, the LOFTID test article inflated the aeroshell, separated from the upper stage on an entry trajectory, and entered the atmosphere to splash down in the Pacific Ocean under parachutes. The test concept of operations is shown in Figure 1. The test article was instrumented with a variety of sensors to be used for post-flight evaluation of vehicle performance. Data from one of the key sensors for trajectory reconstruction, the Inertial Measurement Unit (IMU), was not captured in the data recorder due to a malfunction. Data from the nose cone mounted Flush Air Data Sensing (FADS) system were successfully acquired. The layout of the FADS sensors and the measured pressures during atmospheric entry are shown in Figure 2. The FADS data were combined with a Newtonian flow pressure model [1, 2] to produce estimates of the atmospheric relative trajectory. A Mach number anchoring technique given in [2] was used to stabilize estimates in high speed flight conditions. Since no IMU data were available, a trajectory simulation was used to provide the Mach number time history. The resulting estimates of the atmospheric-relative trajectory are shown in Figures 3. Given the loss of the IMU data, alternate methods for trajectory reconstruction are being explored. One approach under investigation is the use of the on-board video recorder data to be analyzed to reconstruct attitude motion. This approach is currently under investigation and will be reported on in the final paper. The Newtonian flow pressure model for the FADS analysis will also be updated with a CFD-based pressure model.

Christopher D. Karlgaard↗

Mission-Maps For Outbound Cislunar Transfer Trajectories

This study quantifies the robustness and sensitivity of an outbound cislunar trajectory for a lunar lander in the form of mission-maps, or topological maps that allows either a computer program or mission designer to intuitively optimize the placement of critical outbound correction burns from the derived sensitivity data. The non-linear multi-body dynamics are applied to generate an outbound cislunar reference profile used by a linear covariance analysis (LinCov) tool to compute the expected Δv and trajectory dispersions due to the initial state uncertainty, sensor errors, maneuver execution errors, and disturbance accelerations along the outbound cislunar profile. The rapid performance analysis capabilities of LinCov are complimented with parallel processing techniques to evaluate hundreds and thousands of different translational burn locations, placements, and targeting constraints to identify the combination that minimizes the total Δv usage (nominal plus 3σ Δv) and trajectory dispersions at lunar orbit insertion. This study utilizes a generalized reference targeting algorithm to quickly assess the integrated closed-loop GN&C system performance due to different targeting configurations and constraints. The resulting mission maps provide an intuitive insight to ascertain each trajectory correction maneuver’s (TCM) sensitivity to different burn times along an outbound cislunar trajectory and quickly identify desirable engineering tradeoffs when performing analysis on the number and placement of these burns that nominally zero. Multiple mission maps are generated for a variety of different performance parameters that allow engineers to visually identify optimal solutions for trajectory correction maneuver placements, the number of correction burns, and the targeting constraints for each burn.

GN&C↗

Vehicle trajectory prediction near or at traffic signal

A system and method for determining a predicted trajectory of a human-driven host vehicle as the human-driven host vehicle approaches a traffic signal. The method includes: obtaining a host vehicle-traffic light distance d x and a longitudinal host vehicle speed v x that are each taken when the human-driven host vehicle approaches the traffic signal; obtaining a traffic light signal phase P t and an traffic light signal timing T t ; obtaining a time of day TOD; providing the host vehicle-traffic light distance d x , the longitudinal host vehicle speed v x , the traffic light signal phase P t , the traffic light signal timing T t , and the time of day TOD as input into an artificial intelligence (AI) vehicle trajectory prediction application, wherein the AI vehicle trajectory prediction application implements an AI vehicle trajectory prediction model; and determining the predicted trajectory of the human-driven host vehicle using the AI vehicle trajectory prediction application.

97 MATHEMATICS AND COMPUTING↗

Speed Trajectory Optimization for a Heavy-Duty Truck Traversing Multiple Signalized Intersections: A Dynamic Programming Study

This paper explores the fuel savings that can be achieved by optimizing the speed trajectory of a heavy-duty truck traversing a sequence of intersections, under the assumptions that the behavior of the leading traffic and the timing of the traffic lights is known. Specifically, we look at the impact of corridor topology (i.e. green cycle lengths, phase offsets) on the expected fuel savings of the optimized trajectories. This is an important area of research because vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) technology has the potential to allow autonomous vehicles to reduce fuel consumption, especially in urban and sub-urban driving scenarios. The literature tackles the problem of arterial corridor trajectory optimization, and shows the potential fuel saving benefits. However, previous research focuses primarily on passenger vehicles, and often limits its findings to specific case studies. The main contribution of this paper is to offer an estimate of the fuel saving potential - for heavy-duty trucks and under different corridor characteristics - of optimizing trajectories in an urban arterial with V2V and V21 capabilities.

42 ENGINEERING↗

Observing quantum trajectories: From Mott’s problem to quantum Zeno effect and back

The experimental results of Kocsis et al., Mahler et al. and the proposed experiments of Morley et al. show that it is possible to construct “trajectories” in interference regions in a two-slit interferometer. These results call for a theoretical re-appraisal of the notion of a “quantum trajectory” first introduced by Dirac and in the present paper we re-examine this notion from the Bohm perspective based on Hamiltonian flows. In particular, we examine the short-time propagator and the role that the quantum potential plays in determining the form of these trajectories. These trajectories differ from those produced in a typical particle tracker and the key to this difference lies in the active suppression of the quantum potential necessary to produce Mott-type trajectories. We show, using a rigorous mathematical argument, how the active suppression of this potential arises. Finally we discuss in detail how this suppression also accounts for the quantum Zeno effect.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Symplectic approach to calculation of magnetic field line trajectories in physical space with realistic magnetic geometry in divertor tokamaks

A new approach to integration of magnetic field lines in divertor tokamaks is proposed. In this approach, an analytic equilibrium generating function (EGF) is constructed in natural canonical coordinates ({psi},{theta}) from experimental data from a Grad-Shafranov equilibrium solver for a tokamak. {psi} is the toroidal magnetic flux and {theta} is the poloidal angle. Natural canonical coordinates ({psi},{theta},{phi}) can be transformed to physical position (R,Z,{phi}) using a canonical transformation. (R,Z,{phi}) are cylindrical coordinates. Another canonical transformation is used to construct a symplectic map for integration of magnetic field lines. Trajectories of field lines calculated from this symplectic map in natural canonical coordinates can be transformed to trajectories in real physical space. Unlike in magnetic coordinates [O. Kerwin, A. Punjabi, and H. Ali, Phys. Plasmas 15, 072504 (2008)], the symplectic map in natural canonical coordinates can integrate trajectories across the separatrix surface, and at the same time, give trajectories in physical space. Unlike symplectic maps in physical coordinates (x,y) or (R,Z), the continuous analog of a symplectic map in natural canonical coordinates does not distort trajectories in toroidal planes intervening the discrete map. This approach is applied to the DIII-D tokamak [J. L. Luxon and L. E. Davis, Fusion Technol. 8, 441 (1985)]. The EGF for the DIII-D gives quite an accurate representation of equilibrium magnetic surfaces close to the separatrix surface. This new approach is applied to demonstrate the sensitivity of stochastic broadening using a set of perturbations that generically approximate the size of the field errors and statistical topological noise expected in a poloidally diverted tokamak. Plans for future application of this approach are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Persistent quantum interfering electron trajectories

The emission of above-ionization-threshold harmonics results from the recombination of two-electron wave packets moving along a ''short'' and a ''long'' trajectory in the atomic continuum. Attosecond pulse train generation has, so far, been attributed to the short trajectory, attempted to be isolated through targeted trajectory-selective phase-matching conditions. Here, we provide experimental evidence for the contribution of both trajectories to the harmonic emission, even under phase-matching conditions unfavorable for the long trajectory. This is finger printed in the interference modulation of the harmonic yield as a function of the driving laser intensity. The effect is also observable in the sidebands, which arise from the frequency mixing of the harmonics and the driving laser field, an effect with consequences in cross-correlation pulse metrology approaches.

74 ATOMIC AND MOLECULAR PHYSICS↗

Trajectory Segmentation Map-Matching Approach for Large-Scale, High-Resolution GPS Data

With the development of smartphones and portable GPS devices, large-scale, high-resolution GPS data can be collected. Map matching is a critical step in studying vehicle driving activity and recognizing network traffic conditions from the data. A new trajectory segmentation map-matching algorithm is proposed to deal accurately and efficiently with large-scale, high-resolution GPS trajectory data. The new algorithm separated the GPS trajectory into segments. It found the shortest path for each segment in a scientific manner and ultimately generated a best-matched path for the entire trajectory. The similarity of a trajectory segment and its matched path is described by a similarity score system based on the longest common subsequence. The numerical experiment indicated that the proposed map-matching algorithm was very promising in relation to accuracy and computational efficiency. Large-scale data set applications verified that the proposed method is robust and capable of dealing with real-world, large-scale GPS data in a computationally efficient and accurate manner.

97 MATHEMATICS AND COMPUTING↗

Extracting Vehicle Trajectories from Partially Overlapping Roadside Radar

This work presents a methodology for extracting vehicle trajectories from six partially-overlapping roadside radars through a signalized corridor. The methodology incorporates radar calibration, transformation to the Frenet space, Kalman filtering, short-term prediction, lane-classification, trajectory association, and a covariance intersection-based approach to track fusion. The resulting dataset contains 79,000 fused radar trajectories over a 26-h period, capturing diverse driving scenarios including signalized intersections, merging behavior, and a wide range of speeds. Compared to popular trajectory datasets such as NGSIM and highD, this dataset offers extended temporal coverage, a large number of vehicles, and varied driving conditions. The filtered leader–follower pairs from the dataset provide a substantial number of trajectories suitable for car-following model calibration. The framework and dataset presented in this work has the potential to be leveraged broadly in the study of advanced traffic management systems, autonomous vehicle decision-making, and traffic research.

33 ADVANCED PROPULSION SYSTEMS↗