Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THERMONUCLEAR DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

The effects of rotation, electric field, and recycling neutrals on determining the edge pedestal density profile

The edge density profile is calculated from the continuity and momentum balance equations, using experimental electric field and rotation velocities and a calculated recycling neutral source, to evaluate the relative importance of these quantities in determining the observed structure of the edge density profile in a DIII-D [J. Luxon, Nucl. Fusion 42, 614 (2002)] high-confinement mode discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Turbulence in solar wind and laboratory plasmas

Recent studies of plasma turbulence based on measurements within solar wind and laboratory plasmas has been discussed. Evidences for the presence of a turbulent energy cascade, using the Yaglom's law for MHD turbulence, has been provided through data from the Ulysses spacecraft. This allows, for the first time, a direct estimate of the turbulent energy transfer rate, which can contribute to the in situ heating of the solar wind. The energy cascade has been evidenced also for ExB electrostatic turbulence in laboratory magnetized plasmas using measurements of intermittent transport (bursty turbulence) at the edge of the RFX-mod reversed field pinch plasma device. Finally the problem of the dispersive region of turbulence in solar wind above the ion-cyclotron frequency, where a spectral break is usually observed, and the problem of dissipation in a collisionless fluid as the solar wind, are briefly discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hydrogen emissions from peripheral plasmas in local island divertor and helical divertor configurations

Superdense core plasmas with a highly peaked electron density profile have been obtained in reduced recycling discharges in the Large Helical Device [O. Motojima et al., Phys. Plasmas 6, 1843 (1999)]. The polarization separation spectroscopy technique has been applied to characterize H{alpha} emissions in the peripheral region of superdense core plasmas. Fitting positions of the high intensity H{alpha} line are located just outside of the last closed flux surface in the local island divertor configuration. In the helical divertor configuration, high intensity emissions are observed around the inner and outer X points and along the divertor legs. In both configurations the hydrogen atoms have an inward velocity along the lines of sight.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electromagnetic effects on toroidal momentum transport

A parametric study of electromagnetic effects on toroidal momentum transport has been performed. The work is based on a new version of the Weiland model where symmetry breaking toroidicity effects derived from the stress tensor have been taken into account. The model includes a self-consistent calculation of the toroidal momentum diffusivity, which contains both diagonal and off-diagonal contributions to the momentum flux. It is found that electromagnetic effects considerably increase the toroidal momentum pinch. They are sometimes strong enough to make the total toroidal momentum flux inward.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetic linear model of the interaction of helical magnetic perturbations with cylindrical plasmas

The linear kinetic model of the interaction of helical rotating magnetic perturbations (resonant and nonresonant) with a tokamak plasma developed in [M. F. Heyn et al., Nucl. Fusion 46, S159 (2006)] is extended by a Galilean invariant collision operator and a different finite Larmor radius expansion scheme of particle current density. The model is applied to study the plasma screening effect on resonant magnetic perturbations and the resulting torques acting on the plasma at various orders of Larmor radius expansion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Alfven cascades with downward frequency sweeping

It is suggested that relatively rare, but challenging for the existing theory Alfven cascades with downward frequency sweeping are actually the infernal Alfven eigenmodes (IAEs). Such modes exist in discharges with flat or weakly reversed q-profile in the broad central region, when the value of the safety factor in this region is slightly above the integer or low-order rational. Similar to the toroidal Alfven eigenmode, but in contrast to the ''conventional'' Alfven cascade with upward frequency sweeping, the spectrum of IAE is almost degenerate with respect to the mode numbers. Both features mentioned above are consistent with experimental observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Edge energy transport barrier and turbulence in the I-mode regime on Alcator C-Mod

We report extended studies of the I-mode regime [Whyte et al., Nucl. Fusion 50, 105005 (2010)] obtained in the Alcator C-Mod tokamak [Marmar et al., Fusion Sci. Technol. 51(3), 3261 (2007)]. This regime, usually accessed with unfavorable ion B x {nabla}B drift, features an edge thermal transport barrier without a strong particle transport barrier. Steady I-modes have now been obtained with favorable B x {nabla}B drift, by using specific plasma shapes, as well as with unfavorable drift over a wider range of shapes and plasma parameters. With favorable drift, power thresholds are close to the standard scaling for L-H transitions, while with unfavorable drift they are {approx} 1.5-3 times higher, increasing with I{sub p}. Global energy confinement in both drift configurations is comparable to H-mode scalings, while density profiles and impurity confinement are close to those in L-mode. Transport analysis of the edge region shows a decrease in edge {chi}{sub eff}, by typically a factor of 3, between L- and I-mode. The decrease correlates with a drop in mid-frequency fluctuations (f{approx} 50-150 kHz) observed on both density and magnetics diagnostics. Edge fluctuations at higher frequencies often increase above L-mode levels, peaking at f{approx} 250 kHz. This weakly coherent mode is clearest and has narrowest width ({Delta}f/f{approx} 0.45) at low q{sub 95} and high T{sub ped}, up to 1 keV. The E{sub r} well in I-mode is intermediate between L- and H-mode and is dominated by the diamagnetic contribution in the impurity radial force balance, without the V{sub pol} shear typical of H-modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two-dimensional axisymmetric and three-dimensional helical equilibrium in the line-tied screw pinch

The line-tying condition at a conducting anode is shown to provide a localized modification to the well-understood 1-D screw pinch equilibrium in the presence of bulk plasma diamagnetism. Diamagnetic currents cannot flow near the conducting anode and are measured to disappear in a localized boundary layer, causing a weak mirror configuration that breaks 1-D equilibrium and causes large parallel pressure gradients suggestive of significant radial outflows. For sufficiently large plasma currents, the paramagnetic nature of parallel current drives the equilibrium to paramagnetism and destroys the mirror effect. At a critical plasma current, the axisymmetric equilibrium is found to transition to a long-lived, rotating, helical 3-D equilibrium state. Internal measurements of this state via multi-point correlation analysis techniques illustrate that it preserves the flux surfaces and pressure profile of the axisymmetric equilibrium. Measurements indicate that despite the fact that the flux surfaces wander at the anode, the line-tied boundary conditions are not necessarily violated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of induced axial magnetic field on plasma dynamics and radiative characteristics of Z pinches

The influence of an induced axial magnetic field on plasma dynamics and radiative characteristics of Z pinches is investigated. An axial magnetic field was induced in a novel Z-pinch load: a double planar wire array with skewed wires (DPWAsk), which represents a planar wire array in an open magnetic configuration. The induced axial magnetic field suppressed magneto-Rayleigh-Taylor (MRT) instabilities (with m = 0 and m = 1 instability modes) in the Z-pinch plasma. The influence of the initial axial magnetic field on the structure of the plasma column at stagnation was manifested through the formation of a more uniform plasma column compared to a standard double planar wire array (DPWA) load [V. L. Kantsyrev et al., Phys. Plasmas 15, 030704 (2008)]. The DPWAsk load is characterized by suppression of MRT instabilities and by the formation of the sub-keV radiation pulse that occurs before the main x-ray peak. Gradients in plasma parameters along the cathode-anode gap were observed and analyzed for DPWAsk loads made from low atomic number Z (Al) and mid-Z (brass) wires.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma transport in stochastic magnetic field caused by vacuum resonant magnetic perturbations at diverted tokamak edge

A kinetic transport simulation for the first 4 ms of the vacuum resonant magnetic perturbations (RMPs) application has been performed for the first time in realistic diverted DIII-D tokamak geometry [J. Luxon, Nucl. Fusion 42, 614 (2002)], with the self-consistent evaluation of the radial electric field and the plasma rotation. It is found that, due to the kinetic effects, the stochastic parallel thermal transport is significantly reduced when compared to the standard analytic model [A. B. Rechester and M. N. Rosenbluth, Phys. Rev. Lett. 40, 38 (1978)] and the nonaxisymmetric perpendicular radial particle transport is significantly enhanced from the axisymmetric level. These trends agree with recent experimental result trends [T. E. Evans, R. A. Moyer, K. H. Burrell et al., Nat. Phys. 2, 419 (2006)]. It is also found, as a side product, that an artificial local reduction of the vacuum RMP fields in the vicinity of the magnetic separatrix can bring the kinetic simulation results to a more detailed agreement with experimental plasma profiles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Residual parallel Reynolds stress due to turbulence intensity gradient in tokamak plasmas

A novel mechanism for driving residual stress in tokamak plasmas based on k{sub ||} symmetry breaking by the turbulence intensity gradient is proposed. The physics of this mechanism is explained and its connection to the wave kinetic equation and the wave-momentum flux is described. Applications to the H-mode pedestal in particular to internal transport barriers, are discussed. Also, the effect of heat transport on the momentum flux is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Anisotropic flow analysis in the ALICE experiment

Anisotropic flow is one of the observables which is sensitive to the properties of the created hot and dense system in heavy-ion collisions. Unfortunately detailed measurements of anisotropic flow are difficult due to contributions from nonflow correlations. In these proceedings a recently developed method for flow analysis, called Q-cumulants (a.k.a. direct cumulants), will be presented. This new method is used to study azimuthal correlations in p-p collisions at 7 TeV with the ALICE detector.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The pinch of cold ions from recycling in the tokamak edge pedestal

We apply the ''natural fueling mechanism'' [W. Wan, S. E. Parker, Y. Chen, and F. W. Perkins, Phys. Plasmas 17, 040701 (2010)] to the edge pedestal. The natural fueling mechanism is where cold ions naturally pinch radially inward for a heat-flux dominated plasma. It is shown from neoclassical-neutral transport coupled simulations that the recycling neutrals and the associated source ions are colder than the main ions in the edge pedestal. These recycling source ions will pinch radially inward due to microturbulence. Gyrokinetic turbulence simulations indicate that near the top of the pedestal, the pinch velocity of the recycling source ions is much higher than the main ion outgoing flow velocity. The turbulent pinch of the recycling source ions may play a role in the edge pedestal transport and dynamics. The cold ion temperature significantly enhances the pinch velocity of the recycling source ions near to the pedestal top. Neoclassical calculations show a cold ion pinch in the pedestal as well.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Peak neoclassical toroidal viscosity at low toroidal rotation in the DIII-D tokamak

Observation of a theoretically predicted peak in the neoclassical toroidal viscous (NTV) force as a function of toroidal plasma rotation rate {Omega} is reported. The NTV was generated by applying n=3 magnetic fields from internal (I-)coils to low {Omega} plasmas produced with nearly balanced neutral beam injection. Locally, the peak corresponds to a toroidal rotation rate {Omega}{sub 0} where the radial electric field E{sub r} is near zero as determined by radial ion force balance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Vibrational States of Hydrogen Molecules in One Third LHD Negative Ion Source

The effect of the cesium on hydrogen negative ions is discussed using the vacuum ultraviolet emissions (VUV) from vibrational states of hydrogen molecules. The VUV spectrum from 90 to 165 nm is related to the H{sup -} production from the dissociative attachment of electrons to hydrogen molecules. The VUV spectra in hydrogen plasmas are measured in the extraction region of a negative ion source for neutral beam injector. Under the pure hydrogen discharge, the cesium vapor is introduced into the ion source to enhance the hydrogen negative ion density. When the same arc power of {approx}99 kW is applied in both with and without cesium admixture cases, the ratio of the observed VUV spectrum without to with cesium is not changed clearly. Therefore the production process of H{sup -} related to the wall/electrode surface would be enhanced rather than the volume production process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cavity Ring-Down System for Density Measurement of Negative Hydrogen Ion on Negative Ion Source

A Cavity Ring-Down (CRD) system was applied to measure the density of negative hydrogen ion (H{sup -}) in vicinity of extraction surface in the H{sup -} source for the development of neutral beam injector on Large Helical Device (LHD). The density measurement with sampling time of 50 ms was carried out. The measured density with the CRD system is relatively good agreement with the density evaluated from extracted beam-current with applying a similar relation of positive ion sources. In cesium seeded into ion-source plasma, the linearity between an arc power of the discharge and the measured density with the CRD system was observed. Additionally, the measured density was proportional to the extracted beam current. These characteristics indicate the CRD system worked well for H{sup -} density measurement in the region of H{sup -} and extraction.

43 PARTICLE ACCELERATORS↗

Observation of an Energetic-Particle-Driven Instability in the Wall-Stabilized High-beta Plasmas in the JT-60U Tokamak

We have observed a bursting mode in the high-beta plasmas above the ideal beta limit without a conducting wall. The mode frequency is chirping down as the mode amplitude increases, and its initial value is close to the precession frequency of the trapped energetic particle from the perpendicular neutral beams. The mode structure is radially extended with a peak around the q=2 surface. This mode can finally trigger the resistive wall mode (RWM) despite enough plasma rotation for RWM stabilization. It is concluded that the mode is driven by trapped energetic particles. The mode is attributed to the interaction between the trapped energetic particles and a marginally stable mode in the wall-stabilized high-beta{sub N} region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗