Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Systems Integration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

On some integrable systems in the extended lobachevsky space

Some classical and quantum-mechanical problems previously studied in Lobachevsky space are generalized to the extended Lobachevsky space (unification of the real, imaginary Lobachevsky spaces and absolute). Solutions of the Schroedinger equation with Coulomb potential in two coordinate systems of the imaginary Lobachevsky space are considered. The problem of motion of a charged particle in the homogeneous magnetic field in the imaginary Lobachevsky space is treated both classically and quantum mechanically. In the classical case, Hamilton-Jacoby equation is solved by separation of variables, and constraints for integrals of motion are derived. In the quantum case, solutions of Klein-Fock-Gordon equation are found.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Integrating Systems and Synthetic Biology to Understand and Engineer Microbiomes

Microbiomes are complex and ubiquitous networks of microorganisms whose seemingly limitless chemical transformations could be harnessed to benefit agriculture, medicine, and biotechnology. Here, the spatial and temporal changes in microbiome composition and function are influenced by a multitude of molecular and ecological factors. This complexity yields both versatility and challenges in designing synthetic microbiomes and perturbing natural microbiomes in controlled, predictable ways. In this review, we describe factors that give rise to emergent spatial and temporal microbiome properties and the meta-omics and computational modeling tools that can be used to understand microbiomes at the cellular and system levels. We also describe strategies for designing and engineering microbiomes to enhance or build novel functions. Throughout the review,we discuss key knowledge and technology gaps for elucidating the networks and deciphering key control points for microbiome engineering, and highlight examples where multiple omics and modeling approaches can be integrated to address these gaps.

42 ENGINEERING↗

Quantitative Evaluation of an Integrated System for Valorization of Wastewater Algae as Bio-oil, Fuel Gas, and Fertilizer Products

Algal systems have emerged as a promising strategy for simultaneous treatment and valorization of wastewater. However, further advancement and real-world implementation are hindered by the limited knowledge on the full energetic and nutrient product potentials of such systems and the corresponding value of these products. In this work, an aqueous-based system for the conversion of wastewater-derived algae and upgrading of crude products was designed and demonstrated. Bio-oil, fuel gas, and fertilizer products were generated from algal biomass harvested from a municipal wastewater treatment facility. Experiments showed that 68% of chemical energy contained in the algal biomass could be recovered with 44% in upgraded bio-oil and 23% in fuel gas (calculated as higher heating values), and 44% and 91% of nitrogen and phosphorus element contents in the original feedstock could be recovered as fertilizer products (ammonium sulfate and struvite), respectively. For 1,000 kg of such dry algal biomass, these products had an estimated total value of $427 (in 2014 U.S. dollars). For the first time, experiment-based energy and nutrient recovery potentials of wastewater-derived algae were presented in an integrated manner. Findings also revealed critical research needs and suggested strategies to further improve resource recovery and waste valorization in these systems.

09 BIOMASS FUELS↗

Wound-Field Synchronous Machine-System Integration toward 8X Power Density and Commercialization

In support of VTO's Electric Drive R&D activity, the Electric Drive Technologies (EDT) Consortium, a multi-disciplinary team of national labs and universities, coordinates and conducts a portfolio of research to advance the state-of-the-art in electric drive technologies. The Consortium established the following strategic goal listed below: (EDT Research Consortium Strategic Goal (compared to 2015 baseline)) A 125K electric traction drive system: (1) 8X power density improvement, or 1/10 the volume (33 kW/L), (2) 1/2 the cost ($\$$3.3/kW), (3) 2X useful life (300,000 miles), and (4) 100 kW/L inverter and a <20,000 rpm, 50kW/L electric motor The objective of this project is to design a Wound Field Synchronous Machine with 8X power density improvement and cost below $\$$3.3/kW.

42 ENGINEERING↗

Crop models: integrating systems from the molecular to global for agricultural productivity and sustainability

Mathematical models that simulate crop growth in response to environmental conditions and management practices are essential tools for exploring agriculture-based strategies to address food security and environmental sustainability challenges. Early applications of crop models focused on supporting farmers in making management decisions. Applications have since expanded to estimating future impacts on local and global food production from changing climates. Emerging applications of crop models aim to leverage how these models integrate plant processes across biological scales to identify engineering or breeding strategies that account for environmentally-responsive dynamics at field scales and for exploring solutions to improve sustainability. In this review, we highlight recent studies across these four broad application areas and highlight potential future directions for the crop modeling field.

Piao, Ximin [Univ. of Illinois at Urbana-Champaign↗

Magnetic field in the Lobachevsky space and related integrable systems

Various possibilities to define analogs of the uniform magnetic field in the Lobachevsky space are considered using different coordinate systems in this space. Quantum mechanical problem of motion in the defined fields is also treated. Variables in the Schroedinger equation are separated and diagonal operators are found. For some cases, exact solutions are obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

System Integration of Rationally Designed Dilute Alloy Catalysts for Energy-Efficient Electrochemical CO 2 -To-Fuel Conversion

Energy effiecient electrochemical conversion of CO 2 to high-demand chemicals and transportation fuels using renewable solar and wind energy is a key technology needed for a high-productivity, low-carbon future. However, the development of scalable, low-cost, active, selective, and stable electrocatalysts remains a key challenge that needs to be overcome to enable high-volume conversion of CO 2 to feedstock chemicals for the chemical industry. In previous work, Lawrence Livermore National Laboratory (LLNL) has developed a rational design platform for dilute alloy transition metal electrocatalysts that promise to make electrochemical CO 2 conversion more energy efficient and selective. In this project, we worked with our industrial partners, Twelve and TotalEnergies, to improve scale up, integration, and stability of LLNL’s dilute alloy catalyst technology into an industry-relevant zero gap electrolyzer platform. Through virtual experiments and data analysis, we designed efficient and cost-effective copper-based catalysts. The catalyst was specifically designed to streamline the slowest and most energy-intensive step of the electrochemical chemical transformation of CO 2 to multi-carbon products – that is making the carbon-carbon bond by dimerization of the reaction intermediate carbon monoxide - resulting in up to 10% improvement in energy efficiency for C 2 products while simultaneously increasing the selectivity towards C 2 products. We tested two different scalable catalyst coating technologies and down-selected magnetron sputtering as the technique that provided the best control over catalyst loading, composition, and morphology. Using this technology, we successfully demonstrated integration of our dilute alloy catalysts into a 100 cm 2 electrolyzer platform with Faradaic efficiencies for ethylene production reaching 40% at a current density of 200 mA/cm 2 . We also developed the technology to integrate a well-defined nanoscale porosity by depositing alloy compositions that were compatible with dealloying, that is, selective leaching of an alloy component to generate nanoscale porosity. We observed that integration of the dealloying-derived nanoporosity improved catalyst performance and stability by leading to a more hydrophobic catalyst/anion exchange membrane interface. Unsolved problems that still need to be addressed are corrosion of the Cu catalyst -specifically if the used catalyst is exposed to air - as well as long term stability do to salt formation/deposition and flooding of the catalyst/electrolyzer flow channels, especially at higher current densities. As we only worked on optimization of catalyst composition, coating thickness, and morphology, further performance optimization will require a system level approach that includes optimization of electrolyzer design and membrane technology.

36 MATERIALS SCIENCE↗

Integrated system tests of the LSST raft tower modules

The science focal plane of the LSST camera is made up of 21 fully autonomous 144 Mpixel imager units designated raft tower modules (RTM). These imagers incorporate nine 4K x 4K fully-depleted CCDs and 144 channels of readout electronics, including a dedicated CMOS video processing ASIC and components that provide CCD biasing and clocking, video digitization, thermal stabilization, and a high degree of monitoring and telemetry. Here, the RTM achieves its performance goals for readout speed, read noise, linearity, and crosstalk with a power budget of less than 400mW/channel. Series production is underway on the first units and the production will run until 2018. We present the RTM final design, tests of the integrated signal chain, and performance results for the fully-integrated module with pre-production CCDs.

42 ENGINEERING↗

Atomically precise graphene etch stops for three dimensional integrated systems from two dimensional material heterostructures

Atomically precise fabrication methods are critical for the development of next-generation technologies. For example, in nanoelectronics based on van der Waals heterostructures, where two-dimensional materials are stacked to form devices with nanometer thicknesses, a major challenge is patterning with atomic precision and individually addressing each molecular layer. Here we demonstrate an atomically thin graphene etch stop for patterning van der Waals heterostructures through the selective etch of two-dimensional materials with xenon difluoride gas. Graphene etch stops enable one-step patterning of sophisticated devices from heterostructures by accessing buried layers and forming one-dimensional contacts. Graphene transistors with fluorinated graphene contacts show a room temperature mobility of 40,000 cm 2 V -1 s -1 at carrier density of 4 × 10 12 cm -2 and contact resistivity of 80 Ω·μm. We demonstrate the versatility of graphene etch stops with three-dimensionally integrated nanoelectronics with multiple active layers and nanoelectromechanical devices with performance comparable to the state-of-the-art.

36 MATERIALS SCIENCE↗

Microelectromechanical systems integrating molecular spin crossover actuators

Silicon MEMS cantilevers coated with a 200 nm thin layer of the molecular spin crossover complex [Fe(H{sub 2}B(pz){sub 2}){sub 2}(phen)] (H{sub 2}B(pz){sub 2} = dihydrobis(pyrazolyl)borate and phen = 1,10-phenantroline) were actuated using an external magnetic field and their resonance frequency was tracked by means of integrated piezoresistive detection. The light-induced spin-state switching of the molecules from the ground low spin to the metastable high spin state at 10 K led to a well-reproducible shift of the cantilever's resonance frequency (Δf{sub r} = −0.52 Hz). Control experiments at different temperatures using coated as well as uncoated devices along with simple calculations support the assignment of this effect to the spin transition. This latter translates into changes in mechanical behavior of the cantilever due to the strong spin-state/lattice coupling. A guideline for the optimization of device parameters is proposed so as to efficiently harness molecular scale movements for large-scale mechanical work, thus paving the road for nanoelectromechanical systems (NEMS) actuators based on molecular materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Special Purpose Application Reactors: Systems Integration Decision Support

Microreactors, also known as very-Small Modular Reactors (vSMRs) or Special Purpose Reactors (SPRs), are being considered for use in unique applications where other methods of megawatt level energy production are uneconomical or unavailable. For the purposes of this report, a microreactor is defined as meeting the following criteria: • Factory manufacturable • Easily transportable by truck, plane, train, and/or ship • Produce no more than 20 megawatt thermal (MWth) energy, in order to qualify as Hazard Category 2 under 10CFR830 • Maintains neutronic simplicity, allowing semi- or fully-autonomous operation In the United States (U.S.), there are two general types of microreactors under development: high-temperature gas reactors (HTGRs) and heat pipe reactors. These two reactor types may, due to their differences in working fluid temperatures, be more effectively suited to different use cases. Additionally, they will require different interfacing components depending on their intended use. This report identifies a broad range of use cases for micro-reactors. Additionally, multiple reactor technologies are examined with an emphasis on the reactor sub-systems and interconnections. Using this information, a decision framework is developed to guide future efforts.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Carbon Utilization: Electrochemical Approach Using Novel Catalyst and System Integration

The environmental footprint from power generation can be mitigated by capturing emitted carbon dioxide (CO2) and converting it to value-added fuel sources. A multitude of different fuels can be produced from CO2 depending on the chemical reaction catalysts. Typically, these pathways can be developed electrochemically, or through hydrogenation. In recent years the electrochemical reduction of CO2 has grown exponentially, as it has shown potential to decrease atmospheric pollution and provide an additional means of on-demand electricity storage. Formic acid (FA) in particular has industrial applications such as in fuel cells or as a hydrogen storage medium, and requires a lower thermodynamic energy input than any other fuel produced for electrochemical CO2 reduction. However, product selectivity remains a challenge for conventional electrocatalysts, making FA production efficiencies above 50% difficult. To address the challenge of catalytic selectivity, UK CAER employs enzymatic catalysts to facilitate the FA production and minimize unwanted byproducts. Our process couples the catalyst with a charge mediator which is necessary to shuttle electrons, and an electrolyte pH buffer to prevent the catalyst from degrading. Presently, production efficiencies have approached 60% at a rate of over 10 mM FA/hour. System design considerations (flow rate, bulk volume) will also be discussed.

01 COAL, LIGNITE, AND PEAT↗

Bifurcation diagram and the discriminant of a spectral curve of integrable systems on Lie algebras

A bifurcation diagram is a stratified (in general, nonclosed) set and is one of the efficient tools of studying the topology of the Liouville foliation. In the framework of the present paper, the coincidence of the closure of a bifurcation diagram {Sigma}-bar of the moment map defined by functions obtained by the method of argument shift with the closure of the discriminant D-bar{sub z} of a spectral curve is proved for the Lie algebras sl(n+1), sp(2n), so(2n+1), and g{sub 2}. Moreover, it is proved that these sets are distinct for the Lie algebra so(2n). Bibliography: 22 titles.

97 MATHEMATICS AND COMPUTING↗

Transportation and electricity systems integration via electric vehicle charging-as-a-service: A review of techno-economic and societal benefits

Here, in support of global decarbonization efforts, the adoption of electric vehicles is proceeding rapidly across transportation sectors, population groups, and regions. However, access to electric vehicle charging infrastructure remains sparse and inequitable, and technical, economic, and procedural challenges have encumbered its expansion. Charging-as-a-service, which can mitigate cost and effort risks of charging equipment ownership, adds a means of meeting many of these challenges. As charging-as-a-service has not been analyzed or addressed in the scholarly literature, we synthesize media, marketing, and analogous scholarly publications to categorize and describe the functions asserted by existing charging-as-a-service vendors. We demonstrate and quantify the benefits of many of these functions via four example business cases, sited at a detached residence, a multi-unit dwelling, a consumer-facing business, and a commercial fleet depot. Outcomes show that savings and revenues realized via charging-as-a-service can reduce charging costs, beneficially shape grid loads, and make charging installation economical where it otherwise would not be. Discussion highlights the need to deploy charging-as-a-service in cooperation with initiatives promoting societal benefits, including charging access equity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Integrated System of Thermal/Dimensional Analysis for Quality Control of Metallic Melt and Ductile Iron Casting Solidification

The main objective of the present work is to introduce a specific experimental instrument and technique for simultaneously evaluating cooling curves and expansion or contraction of cast metals during solidification. Contraction/expansion analysis illustrates the solidification parameters progression, according to the molten cast iron characteristics, which are dependent on the melting procedure and applied metallurgical treatments, mold media rigidity and thermal behavior [heat transfer parameters]. The first part of the paper summarizes the performance of this two-mold device. Its function is illustrated by representative shrinkage tendency results in ductile cast iron as affected by mold rigidity (green sand and furan resin sand molds) and inoculant type (FeSi-based alloys), published in part previously. The second part of the paper illustrates an application of this equipment adapted for commercial foundry use. It conducts thermal analysis and volume change measurements in a single ceramic cup so that mold media as well as solidification conditions are constants, with cast iron quality as the variable. Experiments compared gray and ductile cast iron solidification patterns. Gray iron castings are characterized by higher undercooling at the beginning and at the end of solidification and lower graphitic expansion. Typically, ductile cast iron exhibits higher graphitic, initial expansion, conducive for shrinkage formation in soft molds.

36 MATERIALS SCIENCE↗