Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

The effect of interfacial phenomena on gas solubility measurements in molten salts

The behavior of fission gases in molten fuel salt reactors governs activity transport from the reactor and can also affect the performance of the reactor itself. The gas solubility can be described thermodynamically by Henry’s law. However, the coupling of the condensed and gas phases depends on the interfacial area, which is difficult to measure or even to estimate. Surfaces of materials in the reactor will include disperse phases in the salt and porosity within the structural materials, covering a range of compositions and sizes. These attributes can affect measurements of fundamental properties such as gas solubility. Methods to obtain gas solubility, surface tension, interfacial energies, and bubble gas transport are reviewed. Recent data from manometric experiments are interpreted based on xenon sorption onto salt-wetted quartz.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Circumstellar shells in the young cluster NGC 2264. II - Infrared and further optical observations.

Flux measurements at 1.6, 2.2, and 3.4 microns for 42 stars in the young cluster NGC 2264 suggest that a significant number of these stars are surrounded by circumstellar material which produces observable infrared excesses. Hydrogen line profiles are used to estimate surface gravities and thereby to predict visual luminosities for a number of pre-main-sequence A stars. Those stars which appear faintest as compared with their predicted luminosities all have infrared excesses.

Strom, S. E.↗

Analysis of hydrological features of portions of the Lake Ontario basin using Skylab and aircraft data

The author has identified the following significant results. S190A and S190B photography proved to be useful for mapping large scale geomorophological features, and for assessing water depth and water quality. Available S192 data were affected by low frequency noise caused by diode light. Hydrological features were classified, and upland green herbaceous vegetation was separated into several classes based on percent vegetation cover. A model for estimating surface soil moisture based on red and near infrared reflectance data was developed and subsequently implemented.

Polcyn, F. C.↗

Cycles till failure of silver-zinc cells with completing failures modes: Preliminary data analysis

One hundred and twenty nine cells were run through charge-discharge cycles until failure. The experiment design was a variant of a central composite factorial in five factors. Preliminary data analysis consisted of response surface estimation of life. Batteries fail under two basic modes; a low voltage condition and an internal shorting condition. A competing failure modes analysis using maximum likelihood estimation for the extreme value life distribution was performed. Extensive diagnostics such as residual plotting and probability plotting were employed to verify data quality and choice of model.

Sidik, S. M.↗

Windfield retrieval from Doppler lidar observations

An approach to the retrieval of a vector wind field from Doppler lidar observations is developed in general terms. The field of radial velocity measurements from each look angle is modeled by a smooth surface, the parameters of the model being determined from the data by least squares techniques. The vector wind field and higher-order fields are obtained from the two modeled surfaces. Estimated measurement errors are taken into account, and error estimates are available for all output data sets.

Lee, R. W.↗

Cycles till failure of silver-zinc cells with competing failure modes - Preliminary data analysis

The data analysis of cycles to failure of silver-zinc electrochemical cells with competing failure modes is presented. The test ran 129 cells through charge-discharge cycles until failure; preliminary data analysis consisted of response surface estimate of life. Batteries fail through low voltage condition and an internal shorting condition; a competing failure modes analysis was made using maximum likelihood estimation for the extreme value life distribution. Extensive residual plotting and probability plotting were used to verify data quality and selection of model.

Sidik, S. M.↗

Windfield retrieval from Doppler lidar observations

An approach to the retrieval of a vector wind field from Doppler lidar observations is developed in general terms. The field of radial velocity measurements from each look angle is modeled by a smooth surface, the parameters of the model being determined from the data by least squares techniques. The vector wind field and higher order fields are obtained from the two modeled surfaces. Estimated measurement errors are taken into account, and error estimates are available for all output data sets.

Lee, R. W.↗

Evaluation of gravimetric ground truth soil moisture data collected for the agricultural soil moisture experiment, 1978 Colby, Kansas, aircraft mission

Soil moisture data acquired to support the development of algorithms for estimating surface soil moisture from remotely sensed backscattering of microwaves from ground surfaces are presented. Aspects of field uniformity and variability of gravimetric soil moisture measurements are discussed. Moisture distribution patterns are illustrated by frequency distributions and contour plots. Standard deviations and coefficients of variation relative to degree of wetness and agronomic features of the fields are examined. Influence of sampling depth on observed moisture content an variability are indicated. For the various sets of measurements, soil moisture values that appear as outliers are flagged. The distribution and legal descriptions of the test fields are included along with examinations of soil types, agronomic features, and sampling plan. Bulk density data for experimental fields are appended, should analyses involving volumetric moisture content be of interest to the users of data in this report.

Arya, L. M.↗

The inner satellites of Jupiter

The Jupiter moon Amalthea and the smaller satellites J1, J2, and J3, discovered by Voyagers 1 and 2, are discussed under the collective appellation of 'inner satellites', which distinguishes them from the Galilean satellites and the outer satellites, J6-J13. Amalthea is a dark, irregular body on which two large craters are visible, with an estimated surface gravity of 5-7 cm/sec-squared. It is speculated that Amalthea's unique color/reflectance characteristics are due to prolonged charged particle and high-velocity micrometeoroid exposure. Dimensional data are presented for J1-3.

Veverka, J.↗

LANDSAT 4 band 6 data evaluation

A series of images of a portion of a TM frame of Lake Ontario are presented. The top left frame is the TM Band 6 image, the top right image is a conventional contrast stretched image. The bottom left image is a Band 5 to Band 3 ratio image. This image is used to generate a primitive land cover classificaton. Each land cover (Water, Urban, Forest, Agriculture) is assigned a Band 6 emissivity value. The ratio image is then combined with the Band 6 image and atmospheric propagation data to generate the bottom right image. This image represents a display of data whose digital count can be directly related to estimated surface temperature. The resolution appears higher because the process cell is the size of the TM shortwave pixels.

Source record↗

Air-sea interaction with SSM/I and altimeter

A number of important developments in satellite remote sensing techniques have occurred recently which offer the possibility of studying over vast areas of the ocean the temporally evolving energy exchange between the ocean and the atmosphere. Commencing in spring of 1985, passive and active microwave sensors that can provide valuable data for scientific utilization will start to become operational on Department of Defense (DOD) missions. The passive microwave radiometer can be used to estimate surface wind speed, total air column humidity, and rain rate. The active radar, or altimeter, senses surface gravity wave height and surface wind speed.

Source record↗

Using the radiative temperature difference at 3.7 and 11 microns to track dust outbreaks

The radiative temperature difference between 3.7 and 11 microns (Delta T) is investigated as a possible method for tracking dust outbreaks. Theoretical calculations indicate that the technique would be most sensitive to dust loading during the day when the Delta Ts are enhanced by reflection of 3.7-micron solar radiation. The feasibility of tracking dust outbreaks is demonstrated by comparing satellite observations with surface estimates of visibility. Theoretical calculations also demonstrate the potential of inferring the dust layer optical depth from these spectral measurements.

Ackerman, Steven A.↗

Hypersonic Research Vehicle (HRV) real-time flight test support feasibility and requirements study. Part 1: Real-time flight experiment support

The results are presented of a study to identify potential real time remote computational applications to support monitoring HRV flight test experiments along with definitions of preliminary requirements. A major expansion of the support capability available at Ames-Dryden was considered. The focus is on the use of extensive computation and data bases together with real time flight data to generate and present high level information to those monitoring the flight. Six examples were considered: (1) boundary layer transition location; (2) shock wave position estimation; (3) performance estimation; (4) surface temperature estimation; (5) critical structural stress estimation; and (6) stability estimation.

Rediess, Herman A.↗

Evaluation of a technique for satellite-derived area estimation of forest fires

The advanced very high resolution radiometer (AVHRR), has been found useful for the location and monitoring of both smoke and fires because of the daily observations, the large geographical coverage of the imagery, the spectral characteristics of the instrument, and the spatial resolution of the instrument. This paper will discuss the application of AVHRR data to assess the geographical extent of burning. Methods have been developed to estimate the surface area of burning by analyzing the surface area effected by fire with AVHRR imagery. Characteristics of the AVHRR instrument, its orbit, field of view, and archived data sets are discussed relative to the unique surface area of each pixel. The errors associated with this surface area estimation technique are determined using AVHRR-derived area estimates of target regions with known sizes. This technique is used to evaluate the area burned during the Yellowstone fires of 1988.

Cahoon, Donald R., Jr.↗

Topography estimation with interferometric synthetic aperture radar using fringe detection

Methods are presented for using Synthetic Aperture Radar (SAR) interferometry data to estimate surface topography. An expression is given to relate the elevation of a ground point to the phase difference of SAR images received from two spatially separated antennas. An iterative algorithm which solves for the position and elevation of each point in the image simultaneously is developed. One of the critical issues that determines the accuracy of the terrain mapping is the phase unwrapping. An approach to the problem by fringe line detection is proposed. The algorithms are tested with two Seasat SAR images of terrain near Yellowstone National Park. The resultant elevation map is compared with a USGS terrain elevation model. The error of the SAR elevation with respect to the digital terrain map is about 8.2 percent of the total terrain variation.

Lin, Qian↗

Comparison of velocity estimates from advanced very high resolution radiometer in the Coastal Transition Zone

Two methods of estimating surface velocity vectors from AVHRR data are applied to the same set of images and the results are compared with in situ and altimeter measurements. The first technique utilizes an automated feature-tracking algorithm and the second uses an inversion of the heat equation. The two methods were comparable in their degree of agreement with the in situ data, giving velocity magnitudes that were 30 to 50 percent less than drifter and acoustic Doppler current profiler velocities measured at 15 to 20 m depth, with rms directional differences of about 60 degrees.

Kelly, Kathryn A.↗

Lagrangian mixed layer modeling of the western equatorial Pacific

Processes that control the upper ocean thermohaline structure in the western equatorial Pacific are examined using a Lagrangian mixed layer model. The one-dimensional bulk mixed layer model of Garwood (1977) is integrated along the trajectories derived from a nonlinear 1 1/2 layer reduced gravity model forced with actual wind fields. The Global Precipitation Climatology Project (GPCP) data are used to estimate surface freshwater fluxes for the mixed layer model. The wind stress data which forced the 1 1/2 layer model are used for the mixed layer model. The model was run for the period 1987-1988. This simple model is able to simulate the isothermal layer below the mixed layer in the western Pacific warm pool and its variation. The subduction mechanism hypothesized by Lukas and Lindstrom (1991) is evident in the model results. During periods of strong South Equatorial Current, the warm and salty mixed layer waters in the central Pacific are subducted below the fresh shallow mixed layer in the western Pacific. However, this subduction mechanism is not evident when upwelling Rossby waves reach the western equatorial Pacific or when a prominent deepening of the mixed layer occurs in the western equatorial Pacific or when a prominent deepening of the mixed layer occurs in the western equatorial Pacific due to episodes of strong wind and light precipitation associated with the El Nino-Southern Oscillation. Comparison of the results between the Lagrangian mixed layer model and a locally forced Eulerian mixed layer model indicated that horizontal advection of salty waters from the central Pacific strongly affects the upper ocean salinity variation in the western Pacific, and that this advection is necessary to maintain the upper ocean thermohaline structure in this region.

Shinoda, Toshiaki↗