Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structural phase transition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Temperature-dependent changes in gas chromatographic separation metrics for trihexyl(tetradecyl)phosphonium-based ionic liquid stationary phases and comparison to conventional polysiloxane stationary phases

Here, to assess whether the trihexyl(tetradecyl)phosphonium chloride ([P 66614 + ][Cl - ]) ionic liquid (IL), employed as a gas chromatographic stationary phase, exhibits temperature-dependent phase transitions or structural heterogeneity, retention thermodynamics for probe molecules of varied chemical structure were investigated by gas chromatography (GC) over the temperature range of 25 to 64 °C using van’t Hoff analysis. All van’t Hoff plots for n-alkanes (C8–C12) and other probe analytes were linear, indicating the absence of detectable phase-transition behavior. The [P 66614 + ][Cl - ] IL was further compared with the [P 66614 + ] bis[(trifluoromethyl)sulfonyl]imide ([P 66614 + ][NTf 2 - ]) IL and commercial polysiloxane stationary phases in terms of temperature-dependent resolution behavior and chromatographic selectivity over the temperature range of 28–52 °C. The resolution factors of analytes in mixtures obtained using gas chromatography–mass spectrometry (GC–MS) and the summation of resolution values decreased smoothly with temperature on both IL stationary phases and on the dimethylphenylcyano-substituted polymeric stationary phase (OV-1701), whereas the poly(50% diphenyl/50% dimethyl siloxane) stationary phase (SPB-50) exhibited irregularities in its temperature-dependent summation of resolution profile, showing a distinct maximum in the temperature range of 34–40 °C. Selectivity values for the IL stationary phases were largely determined by the anion, with the [P 66614 + ][Cl - ] IL providing enhanced separation between polar and aromatic analytes, while the [P 66614 + ][NTf 2 - ] IL favored dispersive and π-π interactions that resulted in a reversal of elution order for some aliphatic–aromatic and alkyne-containing analyte pairs. Capillary columns prepared using different surface activation methods and coated with identical [P 66614 + ][Cl - ] IL stationary phase showed indistinguishable temperature-dependent trends in summation of resolution value and selectivity. An evaluation of analyte-specific selectivity provides insight into the characteristic separation behavior of the stationary phases and enables identification of analyte classes that are more efficiently separated on the [P 66614 + ]-based IL stationary phases compared to conventional stationary phase materials.

Chromatographic selectivity↗
DOE OSTI2024

Domain wall dynamics in tungsten trioxide: Evidence for polar domain walls

Domain walls have distinct properties from the bulk, and tailoring them to suit the needs for device applications is critical. Tungsten trioxide, WO 3 , is of great interest for device applications that make use of domain wall properties; it exhibits a phenomenologically rich sequence of phase transitions, virtually all of which are ferroelastic in character, resulting in many sets of domain walls at low temperatures, each with their own unique properties. Domain wall motion and its contribution to the piezoelectric response have been investigated in WO 3 from 300 to 180 K using resonant ultrasound spectroscopy (RUS) and resonant piezoelectric spectroscopy (RPS), which showed that the P 2 1 / n , P 1 ¯ , and P 2 1 / c phases give a piezoelectric response despite the bulk being nominally centrosymmetric. Second harmonic generation (SHG) confirmed that polarity was strongest within the domain walls, and additional weak signals were found in the domains. Domain wall mobility was investigated in the P b c n , P 2 1 / n , and P 2 1 / c phases from 685 to 5 K. Domain walls in the P 2 1 / n and P 1 ¯ were more mobile than those in the P b c n and P 2 1 / c structures, and soon after the P 1 ¯ → P 2 1 / c transition the walls become pinned at ∼ 140 K . Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Effect of Local Structural Distortions on Antiferroelectric–Ferroelectric Phase Transition in Dilute Solid Solutions of K x Na 1– x NbO 3

The fundamental principles that govern antiferroelectric (AFE)–ferroelectric (FE) transitions are not well understood for many solid solutions of perovskite compounds. For example, crystal chemical considerations based on the average Goldschmidt tolerance factor or ionic polarizability do not precisely predict the boundary between the AFE and FE phases in dilute solid solutions of alkali niobates, such as K x Na 1– x NbO 3 ( x ≤ 0.02). Here, based on detailed structural analysis from neutron total scattering experiments, we provide insights about how the relative local distortions around the A- and B-sites of the ABO 3 perovskite structure affect the AFE/FE order of the average crystallographic phases in K x Na 1– x NbO 3 . Specifically, we show that a higher (lower) ratio of B-site-centered distortions over A-site-centered distortions drives transition toward a long-range FE (AFE) phase, which is based on a competition between the long-range polarizing field of the Nb–O dipoles and the disordering effect of local distortions around the A-site. Our study provides a predictive tool for designing complex solid-solution perovskites with tunable (anti)ferroelectric polarization properties, which can be of interest for various energy-related applications such as high-density energy storage and solid-state cooling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Leveraging Polymorphism in YbCuBi to Map Transport and Elastic Properties

AMX Zintl compounds with the hexagonal ZrBeSi structure have gained significant attention for their remarkable vacancy tolerance and low thermal conductivity. Their 2D honeycomb sublattice, composed of M–X covalent bonds, is believed to contribute to high anharmonicity and unusual thermal transport properties. In this study, we explore the temperature-dependent polymorphism of YbCuBi as a model system to investigate the relationship between the structure and elastic and thermal transport properties in AMX Zintls. YbCuBi undergoes a structural transition from the “flat” Cu–Bi layers in the ZrBeSi structure to corrugated layers in the LiGaGe structure below 410 K, resulting in a distortion of its centrosymmetric structure. To probe the effects of this crystallographic transition, we employ inelastic neutron scattering and temperature-dependent resonant ultrasound spectroscopy. These experimental findings, coupled with first-principles calculations and thermal conductivity measurements, allow us to elucidate a direct relationship between corrugation of the honeycomb lattice and the observed changes in elastic and thermal transport properties. These insights can be extended to other Zintl phases with similar structure types, providing a platform for the rational design of functional materials with tailored thermal properties.

Chemical structure↗
DOE OSTI2021

Pressure Induced Assembly and Coalescence of Lead Chalcogenide Nanocrystals

We report here pressure induced nanocrystal coalescence of ordered lead chalcogenide nanocrystal arrays into one dimensional (1D) and 2D nanostructures. In particular, atomic crystal phase transitions and mesoscale coalescence of PbS and PbSe nanocrystals have been observed and monitored in-situ respectively by wide- and small-angle synchrotron X-ray scattering techniques. At the atomic scale, both nanocrystals underwent reversible structural transformations from cubic to orthorhombic at significantly higher pressures than those for the corresponding bulk materials. At the mesoscale, PbS nanocrystal arrays displayed a superlattice transformation from face-centered cubic to lamellar structures, while no clear mesoscale lattice transformation was observed for PbSe nanocrystal arrays. Intriguingly, transmission electron microscopy (TEM) showed that the applied pressure forced both spherical nanocrystals to coalesce into single crystalline 2D nanosheets and 1D nanorods. Our results confirm that pressure can be used as a straightforward approach to manipulate the interparticle spacing and engineer nanostructures with specific morphologies, and therefore provide insights into the design and functioning of new semiconductor nanocrystal structures under high-pressure conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Phase transitions and potential ferroelectricity in noncentrosymmetric KNaNbOF 5

Increasing the number of known ferroelectrics requires expanding the chemical design space and mechanisms producing ferroelectricity. To that end, we examine the displacive, noncentrosymmetric-to-centrosymmetric phase transition in the oxyfluoride KNaNbOF 5 using ab initio calculations and Landau theory. Here we predict an intermediate Pnma phase occurs in the transition from the known low- and high-temperature phases, Pna2 1 and Cmcm, respectively, which we subsequently confirm using high-resolution and in situ 19 F magic-angle spinning nuclear magnetic resonance. Using the intermediate structure, we then calculate the monodomain polarization switching barrier in KNaNbOF 5 to be ~ 93 meV per formula unit, comparable to existing ferroelectrics. The reversal of the polarization is due to uncompensated antipolar displacements of oxygen and fluorine and does not require oxygen and fluorine site exchange as in other nonswitchable heteroanionic materials, which makes KNaNbOF 5 a viable oxyfluoride for a switchable electric polarization.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Cryo-quenched Fe–Ni–Cr alloy decorative steel single crystals II: Alloy phases, structure, hardness, tensile, tribological, magnetic and electronic properties

We have previously reported (Boatner et al., J. Alloys Compd. 691 (2017) 666–671) on the discovery, formation, processing, and application of a new decorative ternary steel alloy and on its use in a wide range of practical applications including: custom and commercial knives, art objects, jewelry, electronics, and furniture. This decorative property results when polished single crystals of the 70 wt%Fe-15 wt%Ni-15 wt% Cr austenitic alloy are cryo-quenched into the martensitic phase resulting in the formation of a three-dimensional raised pattern of mixed austenitic/martensitic laths. These laths propagate across large dimensions of the material due to the absence of grain boundaries in the single crystal. The macroscopic optically reflective 3-D decorative pattern reproduces the structural symmetry inherent in the single-crystal orientation. This pattern results solely from the metallurgical phase properties of the ternary alloy and is completely distinct from the properties of Damascus steels or more modern so-called pattern-welded steels. Here we use X-ray diffraction, nanoindentation, hardness measurements/scratch testing, tribological measurements, and alloy resistivity and magnetization methods to obtain a more fundamental and comprehensive study of the effects of the austenitic/martensitic phase transition on the structural and physical properties of the 70 wt%Fe-15 wt%Ni-15 wt% Cr alloy. These results reveal new insight into irreversible phenomena that are associated with the inhibited phase transition on heating of the two-phase, mixed austenitic/martensitic structure that is formed subsequent to cryo-quenching the alloy crystal to 77 K.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Quantized resistance revealed at the criticality of the quantum anomalous Hall phase transitions

In multilayered magnetic topological insulator structures, magnetization reversal processes can drive topological phase transitions between quantum anomalous Hall, axion insulator, and normal insulator states. Here we report an examination of the critical behavior of two such transitions: the quantum anomalous Hall to normal insulator (QAH-NI), and quantum anomalous Hall to axion insulator (QAH-AXI) transitions. By introducing a new analysis protocol wherein temperature dependent variations in the magnetic coercivity are accounted for, the critical behavior of the QAH-NI and QAH-AXI transitions are evaluated over a wide range of temperature and magnetic field. Despite the uniqueness of these different transitions, quantized longitudinal resistance and Hall conductance are observed at criticality in both cases. Furthermore, critical exponents were extracted for QAH-AXI transitions occurring at magnetization reversals of two different magnetic layers. The observation of consistent critical exponents and resistances in each case, independent of the magnetic layer details, demonstrates critical behaviors in quantum anomalous Hall transitions to be of electronic rather than magnetic origin. Our finding offers a new avenue for studies of phase transition and criticality in QAH insulators.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Structure of Complex Liquid–Liquid Extraction Organic Phases for Rare Earth Separations

Complex, multicomponent liquids with hierarchical structure and phase transitions are encountered in many natural and industrial processes, including in chemical separations. One notable example is aggregation and organic phase splitting in liquid–liquid extraction (LLE) of metal ions. While these two phenomena that have long been closely associated, a mechanistic link between mesoscale structure and the capacity-limiting organic phase splitting remains elusive due to complexity of these systems. Here, in this study, we combine small-angle X-ray scattering (SAXS), X-ray photon correlation spectroscopy (XPCS), and molecular dynamics simulation to reveal a comprehensive picture of structure at the nano- and mesoscale in these complex solutions. For the representative case of rare earth extraction from an acidic aqueous phase by a malonamide extractant in dodecane, we investigate a wide range of process-relevant extractant and acid concentrations to provide a complete picture of how aggregation depends on composition. We decompose organic phase structure from SAXS into two contributions, which together can capture the scattering at all compositions: composition fluctuations described by the Ornstein–Zernike equation at low wavenumber Q, and nanostructure modeled by a “pre-peak” at intermediate Q. The former contains information about the thermodynamics of demixing, while the latter reflects nanoscopic self-assembly of the extractant and extracted solutes. While fluctuations have typically not been considered in the literature, we find they in fact dominate the total structure for nearly all practical conditions. As only the fluctuations have a strong temperature response, we confirm this attribution with temperature-dependent SAXS measurements, including for extracted europium nitrate complexes. SAXS and XPCS measurements near the critical point find static and dynamic scaling consistent with theory. Overall, this new paradigm for understanding LLE organic phases connects composition, nanoscale, and mesoscale structuring to phase behavior, providing both a comprehensive picture of solution structure and a quantitative link between aggregation and third phase formation.

Peroutka, Allison A. [Argonne National Laboratory ↗
DOE OSTI2020

Tuning energy barriers by doping 2D group-IV monochalcogenides

Structural degeneracies underpin the ferroic behavior of anisotropic next-generation two-dimensional materials and lead to peculiar two-dimensional structural transformations under external fields, charge doping, and/or temperature. The most direct indicator of the ease of these transformations is an elastic energy barrier, defined as the energy difference between the (degenerate) structural ground state unit cell and a unit cell with an increased structural symmetry. Proximity of a two-dimensional material to a bulk substrate can affect the magnitude of the critical fields and/or temperature at which these transformations occur, with the first effect being a relative charge transfer, which could trigger a structural quantum phase transition. With this physical picture in mind, we report the effect of modest charge doping (within -0.2 and +0.2 electrons per unit cell) on the elastic energy barrier J s of ferroelastic black phosphorene and nine ferroelectric/ferroelastic monochalcogenide monolayers. J s is the energy needed to create a Pnm2 1 →P4/nmm two-dimensional structural transformation, and it is sensitive to the orbital character of the electronic charge added or removed. Similar to the effect on the elastic energy barrier of ferroelastic SnO monolayers, group-IV monochalcogenide monolayers show a tunable elastic energy barrier for similar amounts of doping, and a decrease (increase) of J s can be engineered under a modest hole (electron) doping of not more than one-tenth of an electron or a hole per atom.

36 MATERIALS SCIENCE↗
DOE OSTI2022

First-Principles Phonon Quasiparticle Theory Applied to a Strongly Anharmonic Halide Perovskite

Understanding and predicting lattice dynamics in strongly anharmonic crystals is one of the long-standing challenges in condensed matter physics. Here we propose a first-principles method that gives accurate quasiparticle (QP) peaks of the phonon spectrum with strong anharmonic broadening. On top of the conventional first-order self-consistent phonon (SC1) dynamical matrix, the proposed method incorporates frequency renormalization effects by the bubble self-energy within the QP approximation. We apply the developed methodology to the strongly anharmonic α-CsPbBr 3 that displays phonon instability within the harmonic approximation in the whole Brillouin zone. While the SC1 theory significantly underestimates the cubic-to-tetragonal phase transition temperature (T c ) by more than 50%, we show that our approach yields T c = 404–423 K, in excellent agreement with the experimental value of 403 K. Furthermore, we also demonstrate that an accurate determination of QP peaks is paramount for quantitative prediction and elucidation of phonon linewidth.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Computational modeling of grain boundary segregation: A review

Nearly all metals, alloys, ceramics, and their associated composites are polycrystalline in nature, with grain boundaries that separate well-defined crystalline regions that influence materials properties. In all but the most pure elemental systems, intentional solutes or impurities are present and can segregate to, or less commonly away from, the grain boundaries, in turn influencing boundary behavior, their stability, and associated materials properties. In some cases, grain-boundary segregation can also trigger “phase-like” structural transitions that dramatically alter the essential nature of the boundary. With the development of advanced electron microscopy techniques, researchers can directly observe grain-boundary structures and segregation with atomic precision. Despite such spatial resolution, the underlying mechanisms governing grain-boundary segregation remain difficult to characterize. As a result, computational modeling techniques such as density functional theory, molecular dynamics, mesoscale phase-field, continuum defect theory, and others are important complementary tools to experimental observations for studying grain-boundary segregation behavior. In conclusion, these computational methods offer the ability to explore the underlying formation mechanisms of grain-boundary segregation, elucidate complex segregation behavior, and provide insights into solutions to effectively controlling microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Unraveling the Atomic Mechanism of the Crystalline Phase‐Dependent Structural Features and Special Spectral Design of α‐, β‐, and Ɛ‐Ga₂O₃

Atomic‐scale phase transformations profoundly influence the functional properties of Ga₂O₃ polymorphs. By combining irradiation experiments with microstructure characterization and theoretical approaches, phase‐specific energy‐dissipation pathways in α‐, β‐, and ε‐Ga₂O₃ are uncovered and strategies for targeted property design are outlined. Competing antiphase boundaries (APBs) and twin domain boundaries (TDBs) promote irreversible α→ε interconversion through domain fragmentation. In β‐Ga₂O₃, defect‐induced stress gradients drive two distinct local transformations: surface Ga‐aggregated β→δ that stabilizes transient states, and latent‐track‐confined β→κ phase transition with recoverable distortions via cation reordering. Under electronic excitation, β‐Ga₂O₃ forms nanohillocks via robust GaO₆ octahedra (high density/strong Ga─O bonds), while α/ε‐Ga₂O₃ generates nanopores from tetrahedral Ga looseness (low bonding energy), highlighting phase‐dependent surface dynamics shaped by atomic packing and bonding anisotropy. Defect‐regulated recombination suppresses visible photoluminescence in α/β‐Ga₂O₃, whereas in ε‐Ga₂O₃ bandgap narrowing of ΔE: 0.30 eV is observed, enhancing emission. Linking phase‐dependent defect‐carrier interactions and metastable‐phase engineering in Ga₂O₃ enables property optimization for power‐electronics and optoelectronics devices.

electronic state configuration↗
DOE OSTI2025

Helium Incorporation into Scandium Fluoride, a Model Negative Thermal Expansion Material

Scandium trifluoride is a model negative thermal expansion (NTE) material. Its simple structure can be described as an A-site vacant perovskite, and it shows isotropic NTE over a very wide temperature range (up to ~1100 K), due to transverse vibrational motion of the fluoride. Like many framework NTE materials, it undergoes a phase transition at low pressures, adopting a rhombohedral (R3̅c) structure at >0.7 GPa and 300 K in commonly used nonpenetrating pressure media, such as silicone oil. High pressure X-ray diffraction data and gas uptake/release measurements indicate that, on compression in helium above ~200 K, helium is inserted into ScF 3 to form the defect perovskite He x ScF 3 . The incorporation of helium stiffens the structure and changes its phase behavior. At room temperature, complete filling of the structure with helium does not occur until >1.5 GPa. On compression, a cubic perovskite structure is maintained until ~5 GPa. As the pressure was increased to ~9.5 GPa, a further transition occurred at ~7 GPa. The first transition at ~5 GPa is likely to a tetragonal (P4/mbm) perovskite, but the detailed structure of the perovskite phase formed on compression above ~7 GPa is unclear. Cooling down from 300 to 100 K in helium at ~0.4 GPa leads to an approximate composition of He 0.1 ScF 3 . High pressure neutron diffraction measurements, in the temperature range 15–150 K show that the incorporation of helium increases the pressure at which the cubic (Pm3̅m) to rhombohedral (R3̅c) putative quantum structural phase transition occurs from close to 0 GPa to ~0.2 GPa at 0 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

From diamond to BC8 to simple cubic and back: Kinetic pathways to post-diamond carbon phases from metadynamics

Understanding the kinetic pathways connecting carbon polymorphs at multimegabar pressures remains a major unsolved problem in high-pressure physics. Here, we provide insights into the long-standing question of BC8 formation and stability by combining a state-of-the-art SNAP machine-learning interatomic potential with enhanced sampling via metadynamics, enabling direct access to transition mechanisms far beyond the reach of standard molecular dynamics. Our simulations show that carbon phase transformations are intrinsically complex, proceeding through multiple intermediate disordered and crystalline states governed by nontrivial kinetic ordering. We determine the upper pressure limit for BC8 formation and reveal that hexagonal diamond transforms to BC8 faster than cubic diamond—an unexpected and experimentally testable prediction. We also identify a 𝑃⁢222 carbon phase that becomes competitive with diamond and simple cubic above 1.8 TPa, and we demonstrate that BC8 may be quenched to ambient conditions at moderate temperatures. Altogether, these results establish a general and transferable framework for resolving kinetic pathways in solid-solid phase transitions and provide physical insights into carbon's complex high-pressure landscape.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Superconducting dome in ferroelectric-type materials from soft mode instability

Here we present a minimal theory of superconductivity enhancement in ferroelectric-type materials. Simple expressions for the optical mode responsible for the soft mode transition are assumed. A key role is played by the anharmonic phonon damping which is modulated by an external control parameter (electron doping or mechanical strain) causing the appearance of the soft mode. It is shown that the enhancement in the superconducting critical temperature T c upon approaching the ferroelectric transition from either side is due to the Stokes electron-phonon scattering processes promoted by strong phonon damping effects.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Structural dynamics of first-order phase transition in giant magnetocaloric La(Fe,Si) 13 : The free energy landscape

Maximizing the performance of magnetic refrigerators and thermomagnetic energy harvesters is imperative for their successful implementation and can be done by maximizing their operation frequency. One of the features delimiting the frequency and efficiency of such devices is the phase transition kinetics of their magnetocaloric/thermomagnetic active material. While previous studies have described the magnetic component governing the kinetics of the magnetovolume phase transition in La(Fe,Si) 13 giant magnetocaloric materials, a comprehensive description of its structural component has yet to be explored. In this study, in situ synchrotron X-ray diffraction is employed to describe the structural changes upon magnetic field application/removal. Long magnetic field dependent relaxation times up to a few hundred seconds are observed after the driving field is paused. The phase transition is found to be highly asymmetric upon magnetic field cycling due to the different Gibbs energy landscapes and the absence of an energy barrier upon field removal. An exponential relationship is found between the energy barriers and the relaxation times, suggesting the process is governed by a non-thermal activation over an energy barrier process. Such fundamental knowledge on first-order phase transition kinetics suggests pathways for materials optimization and smarter design of magnetic field cycling in real-life devices.

36 MATERIALS SCIENCE↗