Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Reduced grain boundary energies in rare-earth doped MgAl 2 O 4 spinel and consequent grain growth inhibition

In this paper, grain growth inhibition in MgAl 2 O 4 spinel nanostructure was achieved by grain boundary (GB) segregation of rare-earth dopants. Microcalorimetric measurements showed that dense spinel compacts doped with 3 mol% of R 2 O 3 (R = Y, Gd, and La) had decreased GB energies as compared to the undoped spinel, representing reduction in the driving force for grain growth. Segregation energies of the three dopants to the Σ3 (111) GB were calculated by atomistic simulation. The dopants with higher ionic radius tend to segregate more strongly to GBs. The GB energies were calculated from atomistic simulation and, consistent with experiments, a systematic reduction in GB energy with dopant ionic size was found. Finally, high temperature grain growth experiments revealed a significant reduction of grain growth in the doped nanostructures as compared to the undoped one, which was attributed to increased metastability or possibly also a GB dragging originated from the dopant segregation.

36 MATERIALS SCIENCE↗

Stabilization of MgAl 2 O 4 spinel surfaces via doping

Here, the surface structure of complex oxides plays a vital role in processes such as sintering, thin film growth, and catalysis, as well as being a critical factor determining the stability of nanoparticles. We report atomistic calculations of the low-index stoichiometric magnesium aluminate spinel (MgAl 2 O 4 ) surfaces, each with two different chemical terminations. High temperature annealing was used to explore the potential energy landscape and provide more stable surface structures. We find that the lowest energy surface is {100} while the highest energy surface is {111}. The surfaces were subsequently doped with three trivalent dopants (Y 3+ , Gd 3+ , La 3+ ) and one tetravalent dopant (Zr 4+ ) and both the surface segregation energies of the dopants and surface energies of the doped surface were determined. All of the dopants reduce the surface energy of spinel, though this reduction in energy depends on both the size and valence of the dopant. Dopants with larger ionic radius tend to segregate to the surface more strongly and reduce the surface energy to a greater extent. Furthermore, the ionic valence of the dopants seems to have a stronger influence on the segregation than does ionic size. For both undoped and doped spinel, the predicted crystal shape is dominated by {100} surfaces, but the relative fraction of the various surfaces changes with doping due to the unequal changes in energy, which has implications on equilibrium nanoparticle shapes and therefore on applications sensitive to surface properties.

36 MATERIALS SCIENCE↗

Role of Point Defects in Spinel Mg Chalcogenide Conductors

Close-packed chalcogenide spinels, such as MgSc2Se 4 , MgIn2S 4 , and MgSc2S 4 , show potential as solid electrolytes in Mg batteries, but are affected by non-negligible electronic conductivity, which contributes to self-discharge when used in an electrochemical storage device. Using first-principles calculations, we evaluate the energy of point defects as a function of synthesis conditions and Fermi level to identify the origins of the undesired electronic conductivity. Our results suggest that Mg-vacancies and Mg-metal antisites (where Mg is exchanged with Sc or In) are the dominant point defects that can occur in the systems under consideration. While we find anion-excess conditions and slow cooling to likely create conditions for low electronic conductivity, the spinels are likely to exhibit significant n-type conductivity under anion-poor environments, which are often present during high-temperature synthesis. Finally, we explore extrinsic aliovalent doping to potentially mitigate the electronic conductivity in these chalcogenide spinels. Furthermore, the computational strategy is general and can be easily extended to other solid electrolytes (and electrodes) to aid the optimization of the electronic properties of the corresponding frameworks.

36 MATERIALS SCIENCE↗

First-Principles Study of the Voltage Profile and Mobility of Mg Intercalation in a Chromium Oxide Spinel

The development of Mg batteries, which can potentially achieve higher energy densities than Li-ion systems, is in need of cathodes that can reversibly intercalate Mg 2+ and exhibit a higher energy density than the state-of-the-art Chevrel and thio-spinel cathodes. Recent theoretical and experimental studies indicate that the oxide spinel family presents a set of promising Mg cathodes. Here specifically, in this work, we investigate Mg intercalation into the spinel-MgxCr 2 O 4 system. Using first-principles calculations in combination with a cluster expansion model and the nudged elastic band theory, we calculate the voltage curve for Mg insertion at room temperature and the activation barriers for Mg diffusion, respectively, at different Mg concentrations in the Cr 2 O 4 structure. Our results identify a potential limitation to Mg intercalation in the form of stable Mg-vacancy orderings in the Cr 2 O 4 lattice, which exhibit high migration barriers for Mg diffusion in addition to a steep voltage change. Additionally, we propose cation substitution as a potential mechanism that can be used to suppress the formation of the stable Mg-vacancy ordering, which can eventually enable the practical usage of Cr 2 O 4 as a Mg-cathode.

25 ENERGY STORAGE↗

Metastable Li 1+δ Mn 2 O 4 (0 ≤ δ ≤ 1) Spinel Phases Revealed by in Operando Neutron Diffraction and First-Principles Calculations

Here, we examine the reaction mechanisms driven by the lithiation of Li 1+δ Mn 2 O 4 (0 ≤ δ ≤ 1) spinels via in operando neutron powder diffraction (NPD). New reaction mechanisms are proposed involving solid-solution regions within both cubic and tetragonal spinel phases in addition to a continuous phase transition between them. In operando NPD is an ideal tool to follow the light elements such as lithium and oxygen in cathode materials which are often the key to fully understand their structural evolutions. Here, we report a novel methodology to prepare an extremely thick electrode with ~378 mg·cm –2 loading density suitable for the in operando NPD studies. Enabled by such thick electrode, we find that the metal oxygen M–O (M = Li and Mn) bond lengths in both end members LiMn 2 O 4 and Li 2 Mn 2 O 4 experience pronounced changes larger than dictated by the change in lattice parameters because of the locally formed Jahn–Teller distorted Mn 3+ . First-principles density functional theory calculations confirm these metastable intermediates and further propose atomistic reaction pathways for the phase transition by coupling a global structure search algorithm. In conclusion, these findings redefine the conventional understandings on two-phase reactions of this spinel material.

36 MATERIALS SCIENCE↗

Single-Phase Spinel NiCo 2 O 4 as Highly Active and Stable Electrocatalysts for Urea Oxidation Reaction in Urea Electrolysis

Exploring and designing a stable and active catalyst for the urea electro-oxidation reaction (UOR, CO(NH 2 ) 2 + 6OH – → CO 2 + N 2 + 5H 2 O + 6e – ) is crucial for the long-term sustainability of ecological systems and clean energy production. We found that spinel NiCo 2 O 4 is a stable and active electrocatalyst for UOR at a relatively low anodic potential without triggering the competing oxygen evolution reaction (OER). A urea electrolysis cell (CO(NH 2 )2 + H 2 O → CO 2 + N 2 + 2H 2 ) utilizing a spinel NiCo 2 O 4 anode and a commercial Pt cathode was further characterized through galvanostatic polarization tests, demonstrating excellent structural stability at various current densities. Post-mortem analysis of long-term urea electrolysis measurements suggested that NiCo 2 O 4 electrocatalysts maintained a stable spinel structure. However, redistribution of Ni 3+ to Ni 2+ valence on the catalyst surface was observed, in contrast to the intact Co valence, indicating that (i) Ni sites are active toward urea adsorption and sequential electro-oxidation; (ii) while urea oxidation proceeds primarily through the direct electro-oxidation mechanism, chemical reactions between the Ni 3+ site and urea occur during long-term electrochemical UOR operation. Density functional theory (DFT) simulations were used to calculate the adsorption energies of urea molecules on NiO, Co 3 O 4 , and NiCo 2 O 4 , revealing the importance of regulating the configuration of adsorbed urea molecules on the NiCo 2 O 4 surface.

36 MATERIALS SCIENCE↗

Performance improvement of Li-rich layer-structured Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 by integration with spinel LiNi 0.5 Mn 1.5 O 4

Li-rich layered Li 1+x MnyM 1-x-y O 2 (or denoted xLi 2 MnO 3 center dot 1-x LiMO 2 , M = Ni, Co, Mn, etc.) are promising cathode materials for high energy-density Li-ion batteries. However, their commercial applications suffer from problems such as a drop in the capacity and discharge voltage during cycling. In this work, the cycling performance of a layered oxide Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 is improved by integration with spinel LiNi 0.5 Mn 1.5 O 4 to obtain a layered-spinel composite. Characterization by powder X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM) as well as cyclic voltammetry (CV) indicates that delayed degradation of layered Li 2 MnO 3 and the suppressed growth of LiMn 2 O 4 -like spinel are responsible for the performance improvement.

36 MATERIALS SCIENCE↗

Sulfur-resistant and regenerable Ni/Co spinel-based catalysts for methane dry reforming

Oxide-supported metal catalysts were prepared in this study by thermal impregnation of highly crystalline and highly-faceted starting spinels of the form (M 0.75 Mg 0.25 )Al 2 O 4 , where M = Ni, Co, or Cu and mixtures thereof. In situ reduction at 900°C extracts the transition metals from the oxide, and the resulting catalysts contain metal crystallites with particle sizes of ~100 nm and exceedingly low dispersion, but show high activity for dry reforming of methane with turnover frequencies as large as 3.9 at 850°C. The Ni 0.37 5Cu 0.375 Mg 0.25 Al 2 O 4 catalyst shows stable methane conversion out to 12 hours on stream without performance-degrading coking. For the Ni/Co catalysts, the reforming activity and sulfur tolerance are both functions of the Ni/Co ratio and the synthesis temperature of the starting spinel, with Ni 0.375 Co 0.375 Mg 0.25 Al 2 O 4 synthesized at 1500°C displaying fast reaction kinetics even in the presence of 20 ppm H 2 S. High reforming activity is attributed to long linear lengths of high-perfection facet edges and corners on the metal crystallites. Sulfur tolerance seems to be improved by a combination of the oxygen storage capacity of the defective spinel support and its faceting that provides additional reaction sites for activation of CO 2 .

36 MATERIALS SCIENCE↗

Evaluation of sulfur spinel compounds for multivalent battery cathode applications

The rapid growth of portable consumer electronics and electric vehicles demands new battery technologies with greater energy stored at a reduced cost. Energy storage solutions based on multivalent metals, such as Mg, could significantly increase the energy density as compared to lithium-ion based technology. Here, we employ density functional theory calculations to systematically evaluate the performance, such as thermodynamic stability, ion diffusivity and voltage, of a group of 3d transition-metal sulfur-spinel compounds (21 in total) for multivalent cathode applications. Based on our calculations, Cr 2 S 4 , Ti 2 S 4 and Mn 2 S 4 spinel compounds exhibit improved Mg 2+ mobility (diffusion activation energy <650 meV) relative to their oxide counterparts, however the improved mobility comes at the expense of lower voltage and thereby lower theoretical specific energy. Ca 2+ intercalating into Cr 2 S 4 spinel exhibits a low diffusion activation barrier of 500 meV and a voltage of ~2 V, revealing a potential cathode for use in Ca rechargeable batteries.

25 ENERGY STORAGE↗

Phase control of Mn-based spinel films via pulsed laser deposition

Phase transformations in battery cathode materials during electrochemical-insertion reactions lead to capacity fading and low cycle life. One solution is to keep the same phase of cathode materials during cation insertion-extraction processes. Here, we demonstrate a novel strategy to control the phase and composition of Mn-based spinel oxides for magnesium-ion battery applications through the growth of thin films on lattice-matched substrates using pulsed laser deposition. Materials at two extreme conditions are considered: fully discharged cathode MgMn 2 O 4 and fully charged cathode Mn 2 O 4 . The tetragonal MgMn 2 O 4 (MMO) phase is obtained on MgAl 2 O 4 substrates, while the cubic MMO phase is obtained on MgO substrates. Similarly, growth of the empty Mn 2 O 4 spinel in the cubic phase is obtained on an MgO substrate. These results demonstrate the ability to control separately the phase of spinel thin films (e.g., tetragonal vs. cubic MMO) at nominally fixed composition, and to maintain a fixed (cubic) phase while varying its composition (MgxMn 2 O 4 , for x = 0, 1). As a result, this capability provides a novel route to gain insights into the operation of battery electrodes for energy storage applications.

36 MATERIALS SCIENCE↗

Disorder-induced spin excitation continuum and spin-glass ground state in the inverse spinel CuGa 2 O 4

Spinel-structured compounds serve as prototypical examples of highly frustrated systems and are promising candidates for realizing the long-sought quantum spin liquid (QSL) state. However, structural disorder is inevitable in many real QSL candidates and its impact remains a topic of intense debate. In this work, we conduct comprehensive investigations on CuGa 2 ⁢ O 4 , a spinel compound with significant structural disorder, focusing on its thermodynamic properties and spectroscopic behaviors. No long-range magnetic order is observed down to ∼80 mK, as evidenced by magnetic susceptibility, specific-heat, and elastic neutron scattering measurements. More intriguingly, inelastic neutron scattering experiments reveal a broad gapless continuum of magnetic excitations around the Brillouin zone boundary, resembling the magnetic excitation spectra expected for a QSL. Nevertheless, a spin-freezing transition at 𝑇 f ≈ 0.88 K is identified from the cusp in the dc susceptibility curves, where a bifurcation between zero-field-cooling and field-cooling curves occurs. Furthermore, ac susceptibility measurements show a peak close to 𝑇 f at low frequency, which shifts to higher temperature with increasing frequency. These results show that CuGa 2 ⁢ O 4 has a spin-glass ground state, consistent with the establishment of short-range order inferred from the specific-heat measurements. Collectively, these results illustrate the crucial role of disorder in defining the excitation spectrum out of the disordered ground state. Furthermore, our findings shed light onto the broader class of 𝐴⁢𝐵 2 ⁢O 4 spinels and advance our understanding of the spin dynamics in magnetically disordered systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface structure and equilibrium particle shape of the LiMn 2 O 4 spinel from first-principles calculations

First-principles density functional calculations were used to calculate surface properties of the LiMn 2 O 4 spinel. The calculations were benchmarked to obtain the correct semiconducting, Jahn-Teller distorted electronic ground state of bulk LiMn 2 O 4 and, using the same parameters, the predominant low-index polar surface facets (100), (110), and (111) were calculated to study their structure and stability. Following an investigation of possible surface terminations as well as surface layer reconstructions we find that the (111) LMO surface stabilizes through a targeted site exchange of the undercoordinated surface Mn cations with fully coordinated tetrahedral subsurface Li cations, effectively creating a partial inverse spinel arrangement at the surface. This reconstruction renders the (111) facet the most stable among the investigated facets. Here, the equilibrium (Wulff) shape of a LiMn 2 O 4 particle was constructed and exhibits a cubo-octahedral shape with predominant (1 1 1) facets, in agreement with common experimental findings for the spinel structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermodynamics of copper‐manganese and copper‐iron spinel solid solutions

Abstract High‐temperature oxide melt solution calorimetry has been performed to investigate the energetics of spinel solid solutions in the Mn 3 O 4 ‐CuMn 2 O 4 and Fe 3 O 4 ‐CuFe 2 O 4 systems. The spinel solid solutions were synthesized by a ceramic route and calcined at appropriate temperatures to obtain single phase samples. The drop solution enthalpies of the solid solutions in the Mn 3 O 4 ‐CuMn 2 O 4 system are the same within experimental error as the enthalpies of drop solution of mechanical mixtures of the end‐members, indicating a zero heat of mixing, i.e., ideal mixing in terms of enthalpy. In Fe 3 O 4 ‐CuFe 2 O 4 , the drop solution enthalpy of the solid solutions shows a positive deviation from those of the mechanical mixture of the end‐members, suggesting negative mixing enthalpy. The formation enthalpies of the spinel solid solutions from their constituent oxides plus oxygen and from the elements were also determined.

Sahu, Sulata K.↗

Review–From LiMn 2 O 4 to Partially-Disordered Li 2 MnNiO 4 : The Evolution of Lithiated-Spinel Cathodes for Li-Ion Batteries

This personal narrative relates to the discovery in 1981 of stoichiometric LiM 2 O 4 spinel electrodes (where M = metal cation) for lithium-ion batteries by the Goodenough group at Oxford University, UK, and the subsequent identification and evolution of stable lithiated-spinel Li 2 M 2 O 4 (or LiMO 2 ) cathodes at the Council for Scientific and Industrial Research in South Africa and Argonne National Laboratory (USA). In this work, the competition that occurs between the formation of lithiated-spinel and layered (LiMO 2 ) structures at 400 °C, and recent efforts to design high-capacity, Mn-rich composite cathodes with partial disorder, are discussed. The paper is written in honor of John Goodenough's 100th birthday.

25 ENERGY STORAGE↗

Effect of Form of Chromium on Spinel Formation

A number of Hanford high level waste (HLW) streams contain sufficiently high concentrations of chromium for it to become the waste loading limiting component in the waste. Chromium has relatively low solubility in borosilicate glasses and leads to the formation of various crystal phases including spinels. The extent of crystal formation must be managed during melter processing to prevent operational issues and potential premature melter failure that can result from excessive accumulation of crystals in the melter. In previous work for the Department of Energy (DOE) Office of River Protection (ORP), high-waste loading glass formulations were developed for representative HLW streams that are high in chromium. Results from those studies suggested that there may be differences in the crystallization behavior between glasses prepared in crucible melts and those prepared in DuraMelter 100 (DM100) joule heated melter runs. Understanding the cause of those differences has the potential to lead to the development of methods to further increase waste loadings for high chromium HLW streams through control of the formation of chromium-bearing crystals. As noted previously, the potential causes include differences in the form of components in the batch, including the form of chromium, as well as redox effects. This report describes the results from work to elucidate the origins of the observed differences and to identify melter feed composition modifications to control the formation of chromium-bearing crystal phases. The work focused on determining the effects of the form of chromium and the concentrations of oxidants in feed batches on spinel crystallization. Also evaluated was the use of potential melter feed additives to influence the redox state of chromium in the melt and its effect on spinel crystallization. As described in the Test Plan for this work, the objectives were accomplished through a combination of crucible-scale tests, small-scale tests with additives to influence redox state, and melter tests. This work builds on previous work performed at the Vitreous State Laboratory (VSL) of The Catholic University of America (CUA) for ORP to increase the waste loadings and processing rates of HLW glass formulations.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Compositional variations in lunar spinels.

Electron probe data for spinels from Apollo 11, 12, and 14 are presented and analyzed. A modified Johnstone spinel prism showing the data distribution is given. Three projections of this prism are then presented which illustrate the variations of simple ratios that are present in the prism and permit three different perspectives of the data. The results are summarized as fO2 isobars on the spinel prism.

Haggerty, S. E.↗

Pyroxene-spinel intergrowths in lunar and terrestrial pyroxenes

The paper describes the oriented intergrowth of spinel and pyroxene in a pigeonite from Luna 20, an augite from Apollo 16 anorthosite 67075, and an orthopyroxene from a spinel lherzolite nodule from the San Quintin volcanic field, Mexico. Using Mo K alpha radiation, photographs were taken of small, hand-picked single-crystals. A mechanism of exsolution is suggested in which the oxygen framework remains intact and spinel nuclei are formed by the migration of cations from interstitial sites and tetrahedral sites in the original non-stoichiometric pyroxene.

Okamura, F. P.↗

Liquid-solid equilibria involving spinel, ilmenite, and ferropseudobrookite in the system 'FeO'-Al2O3-TiO2 in contact with metallic iron

Phase relations in the liquidus temperature region of the system 'FeO'-Al2O3-TiO2 in contact with metallic iron, at a total pressure below 1 atm, have been determined by the quenching technique. Four invariant points have been located, with phase assemblages and temperatures as follows; wuestite, ulvoespinel, nercynite and liquid, 1306 C; ulvoespinel, ilmenite, ferropseudobrookite and liquid, 1340 C; ulvoespinel, hercynite, ferropseudobrookite and liquid, 1367 C; hercynite, ferropseudobrookite, corundum and liquid, 1465 C. The data obtained confirm the presence of a miscibility gap between titanate and aluminate spinels, and provide quantitative data for the effect of Al2O3 on mutual stability relations among spinel, ilmenite, and ferropseudobrookite phases in the presence of liquid at high temperatures and strongly reducing conditions. It is shown that Al2O3 has a strong stabilizing effect on the phase assemblage ferropseudobrookite and spinel relative to ilmenite.

Schreifels, W. A.↗