Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sn”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Far-infrared spectrophotometry of SN 1987A - Days 265 and 267

The paper presents 16-66-micron spectra of SN 1987A taken on days 266 and 268 after core collapse. The spectrum consists of a nearly flat continuum, strong emission lines of hydrogen, and fine-structure lines of Fe II, Fe III, Co II, S I, and possibly Fe I, Ni II, and S III. From the relative strength of three lines which arise from transitions within the ground and excited states of Fe II, the temperature and a lower limit on the density of the line-emitting region are derived. From the line strengths, the abundances of Fe and S I, the end products of explosive nucleosynthesis in the supernova are estimated. An upper limit is also set to the amount of Co II remaining in the mantle. The low measured mass of Fe suggests that the ejecta are clumpy. The flat continuum is most likely free-free emission from the expanding supernova ejecta. About 35 percent of this emission arises from the ionized metals in the mantle; the rest arises from ionized hydrogen. At the time of these observations, there is no evidence for any emission from dust that may have formed in the supernova ejecta or from preexisting dust in the surrounding medium.

Moseley, S. H.↗
NASA NTRS1990

Convective instabilities in SN 1987A

Following Bandiera (1984), it is shown that the relevant criterion to determine the stability of a blast wave, propagating through the layers of a massive star in a supernova explosion, is the Schwarzschild (or Ledoux) criterion rather than the Rayleigh-Taylor criterion. Both criteria coincide only in the incompressible limit. Results of a linear stability analysis are presented for a one-dimensional (spherical) explosion in a realistic model for the progenitor of SN 1987A. When applying the Schwarzschild criterion, unstable regions get extended considerably. Convection is found to develop behind the shock, with a characteristic growth rate corresponding to a time scale much smaller than the shock traversal time. This ensures that efficient mixing will take place. Since the entire ejected mass is found to be convectively unstable, Ni can be transported outward, even into the hydrogen envelope, while hydrogen can be mixed deep into the helium core.

Benz, Willy↗
NASA NTRS1990

Explosive nucleosynthesis in SN 1987A. II - Composition, radioactivities, and the neutron star mass

The 20 solar mass model of Nomoto and Hashimoto (1988) is utilized with a 6 solar mass. He core is used to perform explosive nucleosynthesis calculations. The employed explosion energy of 10 to the 51st ergs lies within the uncertainty range inferred from the bolometric light curve. The nucleosynthesis processes and their burning products are discussed in detail. The results are compared with abundances from IR observations of SN 1987A and the average nucleosynthesis expected for Type II supernovae in Galactic chemical evolution. The abundances of long-lived radioactive nuclei and their importance for the late light curve and gamma-ray observations are predicted. The position of the mass cut between the neutron star and the ejecta is deduced from the total amount of ejected Ni-56. This requires a neutron star with a baryonic mass of 1.6 + or - 0.045 solar mass, which corresponds to a gravitational mass of 1.43 + or - 0.05 solar mass after subtracting the binding energy of a nonrotating neutron star.

Thielemann, Friedrich-Karl↗
NASA NTRS1990

Observations of gamma-ray line profiles from SN 1987A

Fully resolved gamma-ray line observations from the decay of Co-56 in SN 1987A are presented. Data are from the first two balloon flights of the Gamma-Ray Imaging Spectrometer. On day 433 (after the initial optical sighting) the 847 and 1238 keV lines from Co-56 were observed at 2.3 and 4.3 sigma significance. On day 613, the lines at 847, 1238, and 2599 keV were observed at 4.6, 3.4, and 1.9 sigma, respectively. The combined significance for the three-line complex in both flights is 7.8 sigma. Gaussian profiles yield acceptable least-squares fits to the lines. The line profiles are centered on the red side of the rest energy with typical velocity dispersions of about 3500 km/s FWHM, consistent with an optically thin source, but the line intensities are less than about 30 percent of those produced by the 0.075 solar mass of Co-56 determined from the bolometric light curve.

Tueller, J.↗
NASA NTRS1989

Hyperfine magnetic field on Cd-111 in Heusler alloys Co2MnZ (Z = Si, Ga, Ge, Sn)

The time differential perturbed angular correlation method has been used to measure, as a function of temperature, the hyperfine magnetic field at Cd sites in the Heusler alloys Co2MnZ (Z = Si, Ga, Ge, Sn). The hyperfine fields, normalized to the total magnetic moment per formula unit, show an approximately linear trend toward more positive values with increasing lattice parameter.

Jha, S.↗
NASA NTRS1988

Fe-57 and Sn-119 Moessbauer study of La2CuO(4-y), YBa2Cu3O(7-y) and SmBa2Cu3O(7-y)

Moessbauer studies reveal antiferromagnetic order in doped La2CuO(4-7): at 77 K, H = 476 kOe at Fe-57 and H is less that 10 kOe at Sn-119. Split-source and conventional absorber experiments on RBa2Cu3O(7-y) (R = Y, Sm) are consistent with occupation of 3 sites by Fe-57, the relative population depending on sample preparation and Fe concentration.

Jha, S.↗
NASA NTRS1990

Velocity-resolved far-infrared spectra of forbidden Fe II - Evidence for mixing and clumping in SN 1987A

The forbidden F II profiles at 18 and 26 micron from SN 1987A have been measured with a resolution of about 400 km/s. The central portion of each profile is well-fitted by a Gaussian with a FWHM of 2900 and 2500 km/s, respectively. The centroid velocity is redshifted relative to the LSR by 450 + or - 200 km/s at 18 microns and by 680 + or - 200 km/s at 26 microns. The integrated line fluxes alone imply a maximum expansion velocity of about 2000 km/s and a minimum expansion velocity much less than the maximum. A significant fraction of the iron has mixed with the overlying hydrogen regions. There is a high-velocity emission feature at about +3500 km/s relative to the main emission peak which contains about 3 percent of the total iron mass and has T about 2600 K. The measured 26 micron line flux corresponds to a total singly ionized iron mass of 0.026 solar. The line fluxes and profiles are inconsistent with a physically thin shell of gas and show that there is a wide range of expansion velocities for the iron.

Haas, Michael R.↗
NASA NTRS1990

A merger model for SN 1987 A

It is proposed that the progenitor of SN 1987A was the product of the merger of two binary components in a common envelope that formed as a result of a dynamically unstable mass-transfer phase. Two cases are considered, one in which the primary (presupernova) star is on the first red-giant branch, and one in which it is on the asymptotic giant branch, when the common-envelope phase commences. While in the first case the merger would always have been completed before the supernova event, it is possible in the second case that the supernova progenitor exploded while the stars were still in the process of spiraling into the center of the common envelope. It is shown how the latter scenario might lead to an exotic postsupernova binary with properties that could account for the 8 hr periodicity in the 2 kHz pulse frequency of the supernova pulsar (Kristian et al., 1989). It is also shown how both scenarios may explain all of the major observational features of this supernova event, including its most striking anomalies (particularly the blue color of the apparent progenitor Sk -69 deg 202).

Podsiadlowski, P.↗
NASA NTRS1990

Narrow circumstellar emission lines in SN 1987A

Low and high dispersion short wavelength prime (SWP) spectra of SN 1987A show that the supernova's progenitor was in a post red giant branch stage of evolution at the time of its demise in February 1987. The development of narrow high temperature emission lines of N 5, N 4, N 3, C 3, He 2 and O 3 were followed since May 1987. Observations through April 1990 are presented. The lines are interpreted as arising in a low density gas surrounding the supernova which was photoionized by the extreme UV pulse at shock breakout. In this picture, their temporal evolution is determined primarily by light travel time effects and recombination. Comparison of models of circumstellar environment with the International Ultraviolet Explorer (IUE) observations are discussed.

Sonneborn, George↗
NASA NTRS1991

Directional solidification of Pb-Sn eutectics with vibration

Pb-Sn eutectic alloy was directionally solidified at 1.4 to 3.2 cm/hr with forced convection induced by axial vibration of the growth ampoule with a frequency of 10 to 40 Hz and an amplitude of 0.5 to 1.0 mm. To determine the exact growth rate, an interface demarcation technique was applied. The lamellar spacing was increased 10 to 40 percent in ingots solidified with vibration compared to those solidified without vibration. The number of grain boundaries was increased by vibration. The average intensity of convection in the melt under axial vibration of the ampoule was estimated by comparing the experimental results with a theoretical model.

Caram, Rubens↗
NASA NTRS1991

Directional solidification of Pb-Sn eutectic with vibration

Pb-Sn eutectic alloy was directionally solidified at 1.4 to 3.2 cm/hr with forced convection induced by axial vibration of the growth ampoule with a frequency of 10 to 40 Hz and an amplitude of 0.5 to 1.0 mm. To determine the exact growth rate, an interface demarcation technique was applied. The lamellar spacing was increased 10 to 40 percent in ingots solidified with vibration compared to those solidified without vibration. The average intensity of convection in the melt under axial vibration of the ampoule was estimated by comparing the experimental results with a theoretical model.

Caram, Rubens↗
NASA NTRS1989

Effect of grinding on the fatigue life of titanium alloy (5 Al-2.5 Sn) under dry and wet conditions

The principal factors in the performance of aerospace materials are strength-to-weight ratio, fatigue life, fracture toughness, survivability and, of course, reliability. Machining processes and, in particular, grinding under adverse conditions have been found to cause damage to surface integrity and affect the residual stress distribution in the surface and subsurface region. These effects have a direct bearing on the fatigue life. In this investigation the effects of grinding conditions on the fatigue life of Titanium 5 Al-2.5Sn were studied. This alloy is used in ground form in the manufacturing of some critical components in the space shuttle's main engine. It is essential that materials for such applications be properly characterized for use in severe service conditions. Flat sub-size specimens 0.1 inch thick were ground on a surface grinding machine equipped with a variable speed motor at speeds of 2000 to 6000 rpm using SiC wheels of grit sizes 60 and 120. The grinding parameters used in this investigation were chosen from a separate study. The ground specimens were then fatigued at a selected stress and the resulting lives were compared with that of the virgin material. The surfaces of the specimens were examined under a scanning electron microscope, and the roughness and hardness were measured using a standard profilometer and microhardness tester, respectively. The fatigue life of the ground specimens was found to decrease with the increase in speed for both dry and wet conditions. The fatigue life of specimens ground under wet conditions showed a significant increase at the wheel speed of 2000 rpm for both the grit sizes and thereafter decreased with increase profilometry, microhardness measurements and scanning electron microscopic examination.

Rangaswamy, Partha↗
NASA NTRS1991

Co-57 and Ti-44 production in SN 1987A

A survey of parameterized explosive silicon burning is carried out in order to limit the range of allowed masses of Co-57 produced by SN 1987A. The most likely value is between 0.5 and 2.5 times that implied by a solar ratio for Fe-57/Fe-56. Values more than four and less than one-third times the solar ratio would pose very severe problems for the theory of stellar nucleosynthesis, implying, for example, that Fe-56 was not the dominant iron group isotope or that no electron capture occurred during oxygen burning. Though dependent somewhat on the neutron excess, the Fe-57 yield is most sensitive to the occurrence of an alpha-rich freeze-out. An accurate measurement of the Fe-57 yield, as reflected observationally by the current abundance of radioactive Co-57, is thus an important constraint upon the supernova explosion mechanism. The abundance of Ti-44, another nucleus produced exclusively in the alpha-rich freeze-out, cannot be much greater than that implied by the solar ratio of Ca-44/Fe-56.

Woosley, S. E.↗
NASA NTRS1991

Hydrodynamical instabilities and mixing in SN 1987A - Two-dimensional simulations of the first 3 months

Results are presented from numerical simulations of the early stages of the explosion of SN 1987A. Using a two-dimensional cylindrical geometry version of a smooth particle hydrodynamics code, the explosion is followed for three months to investigate both the early hydrodynamical instabilities and the effect of the subsequent radioactive decay of Ni-56 and Co-56 with half-lives of 6.1 and 77.8 days, respectively. It is shown that the mixing induced by hydrodynamical instabilities occurring during the first few hours is substantially modified at later time by the radioactive decay of Ni-56 and Co-56. The inner cavity of the expanding supernova remnant fills up with nickel, its decay products thus forming a giant 'nickel bubble'. The peak velocity of the nickel increases by approximately 30 percent after the decays. While these results adequately model the core of the observed Fe line profiles, they fail to reproduce the high velocity wings of the spectra.

Herant, Marc↗
NASA NTRS1991

Origin of the burst of TeV gamma-rays from SN 1987 A

An electromagnetic origin of the TeV gamma-ray burst from SN 1987 A is proposed. The TeV gamma-rays result from inverse Compton scattering in the extreme Klein-Nishina limit of nuclear Co-56 gamma-ray lines and soft X-rays by monoenergetic TeV electrons. The model accounts for the observed time delay between the TeV burst and the peak X-ray intensity of about 3 days, and the different burst duration at TeV and X-ray energies.

Schlickeiser, R.↗
NASA NTRS1991

Effect of grinding conditions on the fatigue life of titanium 5Al-2.5Sn alloy

An investigation into the effect of grinding conditions on the fatigue life of titanium 5Al-2.5Sn is presented. Damage to surface integrity and changes in the residual stresses distribution are studied to assess changes in fatigue life. A surface grinding machine, operating at speeds ranging from 2000 to 6000 fpm and using SiC wheels of grit sizes 60 and 120, was used to grind flat subsize specimens of 0.1-in. thickness. After grinding, the specimens were fatigued at a chosen stress and compared with the unadulterated material. A standard profilometer, a microhardness tester, and a scanning electron microscope were utilized to examine surface characteristics and measure roughness and hardness. Increased grinding speed in both wet and dry applications tended to decrease the fatigue life of the specimens. Fatigue life increased markedly at 2000 fpm under wet conditions, but then decreased at higher speeds. Grit size had no effect on the fatigue life.

Rangaswamy, P.↗
NASA NTRS1992

The effect of weld porosity on the cryogenic fatigue strength of ELI grade Ti-5Al-2.5Sn

The effect of weld porosity on the fatigue strength of ELI grade Ti-5Al-2.5Sn at cryogenic temperature was determined. A series of high cycle fatigue (HCF) and tensile tests were performed at -320 F on specimens made from welded sheets of the material. All specimens were tested with weld beads intact and some amount of weld offset. Specimens containing porosity and control specimens containing no porosity were tested. Results indicate that for the weld configuration tested, the fatigue life of the material is not affected by the presence of spherical embedded pores.

Rogers, P. R.↗
NASA NTRS1991

Massive star evolution and SN 1987A

The evolution of massive stars through hydrogen and helium burning is addressed. A set of stellar evolutionary sequences for mass/solar mass of 15, 20, and 25, and metallicity of 0.002, 0.005, 0.007, 0.010, and 0.20 are presented; semiconvection is restricted to operating slower than the local thermal time scale. Using these sequences, simple models of the massive star content of the LMC are found to agree moderately well with the new observational data of Fitzpatrick and Garmany (1990). LMC supergiants were detected only in their postmain-sequence phases, so that 5-10 times more massive stars are there but not identified as such. It is argued that SN 1987A exhibits the normal evolution of a single star of about 20 solar mases having LMC abundances. Despite the variety of envelope behavior, the structure of the core at collapse is rather similar for the stars of a given mass. Variations due to different rates of mass loss are likely to be larger than those due to composition.

Arnett, David↗