Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shell Solar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Evidence for Reduced, Carbon-rich Regions in the Solar Nebula from an Unusual Cometary Dust Particle

Geochemical indicators in meteorites imply that most formed under relatively oxidizing conditions. However, some planetary materials, such as the enstatite chondrites, aubrite achondrites, and Mercury, were produced in reduced nebular environments. Because of large-scale radial nebular mixing, comets and other Kuiper Belt objects likely contain some primitive material related to these reduced planetary bodies. Here, we describe an unusual assemblage in a dust particle from comet 81P/Wild 2 captured in silica aerogel by the NASA Stardust spacecraft. The bulk of this ∼20 μ m particle is comprised of an aggregate of nanoparticulate Cr-rich magnetite, containing opaque sub-domains composed of poorly graphitized carbon (PGC). The PGC forms conformal shells around tiny 5–15 nm core grains of Fe carbide. The C, N, and O isotopic compositions of these components are identical within errors to terrestrial standards, indicating a formation inside the solar system. Magnetite compositions are consistent with oxidation of reduced metal, similar to that seen in enstatite chondrites. Similarly, the core–shell structure of the carbide + PGC inclusions suggests a formation via FTT reactions on the surface of metal or carbide grains in warm, reduced regions of the solar nebula. Together, the nanoscale assemblage in the cometary particle is most consistent with the alteration of primary solids condensed from a C-rich, reduced nebular gas. The nanoparticulate components in the cometary particle provide the first direct evidence from comets of reduced, carbon-rich regions that were present in the solar nebula.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of iron opacity experiment plasma gradients with synthetic data analyses

Experiments have been performed at Sandia National Laboratories Z-facility to validate iron opacity models relevant to the solar convection/radiation zone boundary. Sample conditions were measured by mixing Mg with the Fe and using Mg K-shell line transmission spectra, assuming that the plasma was uniform. We develop a spectral model that accounts for hypothetical gradients, and compute synthetic spectra to quantitatively evaluate the plasma gradient size that can be diagnosed. Two sample designs are investigated, assuming linear temperature and density gradients. First, Mg uniformly mixed with Fe enables temperature gradients greater than 10% to be detected. The second design uses Mg mixed into one side and Al mixed into the other side of the sample in an attempt to more accurately infer the sample gradient. Both temperature and density gradients as small as a few percent can be detected with this design. Experiments have successfully recorded spectra with the second design. In future research, the spectral model will be used to place bounds on gradients that exist in Z opacity experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Design and Fabrication of a Precious Metal‐Free Tandem Core–Shell p + n Si/W‐Doped BiVO 4 Photoanode for Unassisted Water Splitting

Abstract Tandem photoelectrochemical water splitting cells utilizing crystalline Si and metal oxide photoabsorbers are promising for low‐cost solar hydrogen production. This study presents a device design and a scalable fabrication scheme for a tandem heterostructure photoanode: p + n black silicon (Si)/SnO 2 interface/W‐doped bismuth vanadate (BiVO 4 )/cobalt phosphate (CoPi) catalyst. The black‐Si not only provides a substantial photovoltage of 550 mV, but it also serves as a conductive scaffold to decrease charge transport pathlengths within the W‐doped BiVO 4 shell. When coupled with cobalt phosphide (CoP) nanoparticles as hydrogen evolution catalysts, the device demonstrates spontaneous water splitting without employing any precious metals, achieving an average solar‐to‐hydrogen efficiency of 0.45% over the course of an hour at pH 7. This fabrication scheme offers the modularity to optimize individual cell components, e.g., Si nanowire dimensions and metal oxide film thickness, involving steps that are compatible with fabricating monolithic devices. This design is general in nature and can be readily adapted to novel, higher performance semiconducting materials beyond BiVO 4 as they become available, which will accelerate the process of device realization.

Chakthranont, Pongkarn↗

Pyroelectricity of Lead Sulfide (PbS) Quantum Dot Films Induced by Janus-Ligand Shells

Asymmetry is an essential property to control. To do that in nanocrystalline systems we have developed methods to produce Janus-ligand shells on otherwise symmetric PbS quantum dots (QDs). In this work, we demonstrate that control by constructing a system that exhibits pyroelectricity built from spherical PbS QDs. We observed a pyroelectric current in two different configurations. In one configuration, the QDs are self-assembled into close-packed arrays while in the second configuration, the QDs are dispersed into an electro-inactive polymer, polydimethylsiloxane. Both exhibit a pyroelectric response. In the first configuration we estimate a lower limit of the pyroelectric coefficient to be 1.97 × 10 -7 C/m 2 K, which is likely limited by the degree of QD alignment during film formation but is already on par with common pyroelectric systems. Compared with inorganic ceramic-like and polymeric pyroelectric materials, pyroelectric films self-assembled from polar QDs are easier to prepare, responsive to light with different energies based on QD exciton energy, and the polarization of each QD could be easily tuned by constructing different Janus-ligand shells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication and optical properties of multishell InAs quantum dots on GaAs nanowires

Hybrid nanostructures combining nanowires with quantum dots promote the development of nanoelectronic and nanophotonic devices with integrated functionalities. In this work, we present a complex nanostructure with multishell quantum dots grown on nanowires. 1–4 shells of Stranski-Krastanov InAs quantum dots are grown on the sidewalls of GaAs nanowires by metal organic chemical vapor deposition. Different dot shells are separated by 8 nm GaAs spacer shells. With increasing the number of shells, the quantum dots become sparser and tend to align in one array, which is caused by the shrinkage of facets on which dots prefer to grow as well as the strain fields produced by the lower set of dots which influences the migration of In adatoms. The size of quantum dots increases with the increase of shell number due to enhanced strain fields coupling. The spectra of multishell dots exhibit multiwavelength emission, and each peak corresponds to a dot shell. This hybrid structure may serve as a promising element in nanowire intermediate band solar cells, infrared nanolasers, and photodetectors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fe-rich ejecta in the supernova remnant G352.7–0.1 with Suzaku

In this work, we present results from a ∼201.6 ks observation of G352.7–0.1 using the X-ray Imaging Spectrometer on board Suzaku X-ray Observatory. The X-ray emission from the remnant is well described by two-temperature thermal models of non-equilibrium ionization with variable abundances with a column density of N{sub H} ∼ 3.3 × 10{sup 22} cm{sup –2}. The soft component is characterized by an electron temperature of kT{sub e} ∼ 0.6 keV, an ionization timescale of τ ∼ 3.4 × 10{sup 11} cm{sup –3} s, and enhanced Si, S, Ar, and Ca abundances. The hard component has kT{sub e} ∼ 4.3 keV, τ ∼ 8.8 × 10{sup 9} cm{sup –3} s, and enhanced Fe abundance. The elemental abundances of Si, S, Ar, Ca, and Fe are found to be significantly higher than the solar values that confirm the presence of ejecta. We detected strong Fe K-shell emission and determined its origin to be the ejecta for the first time. The detection of Fe ejecta with a lower ionization timescale favors a Type Ia origin for this remnant.

79 ASTRONOMY AND ASTROPHYSICS↗

Differential rotation in magnetized and non-magnetized stars

The effects of magnetic field on stellar differential rotation (DR) are studied by comparing magnetohydrodynamic (MHD) models and their hydrodynamic (HD) counterparts in the broad range of rotation rates and across varying initial rotation profiles. Fully compressible MHD simulations of rotating penetrative convection are performed in a full-spherical shell geometry. Critical conditions for the transition of the DR between a faster equator (solar type) and a slower equator (anti-solar type) are explored by focusing on the “Rossby number (Ro)” and the “convective Rossby number (Ro{sub conv}).” It is confirmed that the transition is more gradual and the critical value for it is higher in the MHD model than in the HD model in view of the Ro{sub conv} dependence. As observed in earlier studies, the rotation profile shows a bistability near the transition in the HD model, whereas it disappears when allowing the growth of magnetic fields except in the model taking the anti-solar-type solution as the initial condition. We find that the transition occurs at Ro≃1 both in the MHD and HD models independently of the hysteresis. Not only the critical value but also the sharpness of the transition is similar between the two models in view of the Ro dependence. The influences of the dynamo-generated magnetic field and/or the hysteresis on convective motion are reflected by Ro. This is why the transition is unified in view of the Ro dependence. We also discuss the Ro dependence of magnetic dynamo activities with emphasis on their possible relation to the kinetic helicity profile.

79 ASTRONOMY AND ASTROPHYSICS↗

Coupled Experimental/Computational Investigation of the Dynamics of Interacting Magnetized Plasmas

The interaction, or interpenetration, of magnetized plasmas of different density and/or pressure occurs in a wide variety of natural and man-made systems. Such systems include extragalactic jets propagating into the intergalactic medium, solar coronal mass ejections into background solar wind, compact toroid (CT) fueling of magnetic fusion plasmas, and jets of capsule shell impurities into DT fusion fuel, which can lead to enhanced impurity mix in inertial fusion implosions. These plasmas may take the form of jets, with open, helical magnetic structure, or plasma “bubbles” with closed magnetic fields (B-fields), such as spheromaks or CT’s. Such structures, both open and closed B-field cases, can transport heat, particles and magnetic flux or magnetic helicity into background plasma regions. For example, the origin of extragalactic magnetic fields may be due, at least in part, to transport by astrophysical jets. The goal of this proposed work was to elucidate the detailed plasma and magnetic field dynamics of high-density plasma jets (open B-field) and bubbles (closed B-field) propagating into lower density background magnetized plasma through controlled laboratory experiments and closely coupled nonlinear MHD modeling. These experiments were conducted in the HelCat (Helicon-Cathode) linear plasma device at the University of New Mexico (UNM). Plasma jets and bubbles were launched via an existing compact coaxial plasma gun, mounted on the HelCat device. This gun produced plasmas tens of cm in scale and lasting tens of microseconds, thereby allowing detailed multipoint, space- and time-resolved measurements to be made routinely. The experiments were directly modeled using the extended magnetohydrodynamic (XMHD) PERSEUS code, developed at Cornell University [23,24]. Both experimental and numerical modeling work are ongoing. The main results to date are reported here. Additional supplemental funding for one year (8/1/2019 – 7/31/2020) supported numerical investigation of photoionization processes important in many low temperature plasmas, including the HelCat device. Initial results of this modeling work is also reported.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectrophotometry of OH 26.5+0.6 from 2 to 40 microns

Airborne and ground-based observations show that OH 26.5+0.6 has strong 10 micrometers and weak 18 micrometers silicate absorptions superposed on an overall energy distribution much like a blackbody. The flux level, color temperature, and depth of the 10 micrometers absorption have varied during two years of observations. A model of the source as a late-type variable star that has ejected an optically thick dust shell is suggested; the mass-loss rate implied is greater than about 0.00001 solar masses per year. The fact that significant flux from the source is observed between 4 and 7 micrometers is evidence that oxygen-rich dust has significant opacity in that wavelength range.

Forrest, W. J.↗

The evolution of the dust shell of Nova Serpentis 1978

Photometric measurements of Nova Serpentis 1978 from V to 19.5 microns covering the first 240 days of the nova's development are reported. A free-free expansion phase was followed by the condensation of a dust shell that became optically thick at both visible and infrared wavelengths. Carbon grains grew to radii of approximately 0.3 microns during the condensation period. The grains appeared to sputter or evaporate for a period of approximately 100 days following infrared maximum. It is found that the condensed carbon comprised 2% of the ejected mass, which implies that carbon abundance was enhanced in the nova shell. The angular expansion rate of the shell yields a distance of approximately 5 kpc and a luminosity of approximately 3000 solar luminosities for Nova Serpentis 1978.

Gehrz, R. D.↗

Implications of the high-state iron-line feature and soft X-ray emission of Hercules X-1

The interpretation that the soft X-ray emission of Her X-1 is due to reprocessing of the primary hard X-rays intercepted by a plasma layer in the Alfven surface imposes quite a stringent - but not an unreasonable - constraint on its parameters. By using the Alfven shell parameters constrained by this interpretation, the degree of ionization of the Alfven shell is calculated. Because the flux of hard X-ray from the neutron star is greatly attenuated inside the Alfven shell, except for a skin depth from its inner surface, the degree of ionization is determined by photoionization due to soft X-rays produced within the Alfven shell. On one hand, the large soft X-ray luminosity, which is about the same as the hard X-ray luminosity, indicates that a substantial fraction of primary hard X-rays is absorbed by the Alfven shell. On the other hand, the fact that the hard X-ray spectrum of Her X-1 observed during the high state shows neither a significant absorption feature down to about 3 keV nor an iron K-absorption dip tells us that the hard X-rays observed at the earth are mostly not reprocessed. This apparent conflict is resolved if the Alfven shell is clumpy (i.e., made of streams or blobs). The observed iron-line feature around 6.5 keV (E.W. about 300 keV) is explained by fluorescent iron K photons produced as a by-product of reprocessing of the hard X-rays by the Alfven shell; for this a large enhancement of the iron abundance with respect to the solar value is not required.

Bai, T.↗

Low-energy hot plasma and particles in Saturn's magnetosphere

Results of the low-energy charged particle experiment carried by Voyager 2 in the Saturn magnetosphere are presented. Measurements of ions of energy greater than 28 keV and electrons of energies greater than 22 keV revealed the presence of a region containing an extremely hot (30-50 keV) plasma extending from the orbit of Tethys past the orbit of Rhea, and a low-energy ion mantle inside the dayside and nightside magnetospheres. H, H2, H3, He, C and O at energies greater than 200 keV/n were found to be important constituents of the Saturn magnetosphere, at relative abundances suggestive of a solar wind origin. Low-energy electron flux enhancements were observed between the L shells of Rhea and Tethys which were absent during the Voyager 1 encounter, and persistent asymmetric electron pitch-angle distributions were noted in the outer magnetosphere in conjunction with the hot ion plasma torus. Signatures of the passage of Tethys and Enceladus through the magnetosphere were found, although not at the positions predicted by dipole magnetic field models.

Krimigis, S. M.↗

The development of shell-like distributions from newborn cometary ions

One-dimensional hybrid computer simulations that are spatially homogeneous are used to investigate the evolution of newborn cometary ions that interact self-consistently with the solar wind. Cometary ions injected at a constant rate are scattered by the growing electromagnetic fluctuations resulting from the associated free energy, and the scattering at relatively low fluctuating field amplitudes leads to shell-like velocity distributions which subtend about 4 pi in solid angle but which have small spread in speed. Shell-like distributions are found to occur when the ion injection rate is relatively slow, when the injected ion mass is relatively light, and when the energy density of the fluctuating magnetic fields exhibits linear growth.

Gary, S. Peter↗

Modeling of the Dust and Gas Outflows from OH 26.5+0.6: The Superwind

We have observed the extreme OH/IR star, OH 26.5+0.6, in the infrared dust continuum and in the sub- millimeter rotational lines of CO. Mid-infrared images reveal the compact nature of the circumstellar shell (less than 0.5 sec). A deep 9.7 microns absorption feature and an absorption at 18 microns show that the dust mass-loss rate is very high. However, the low antenna temperatures of CO J = 1-0 and 2-1 lines suggest that the outer part of the circumstellar shell is much more tenuous. In order to resolve this discrepancy, we have observed the J = 3-2 and 4-3 CO rotational transitions. We have developed a model for the circumstellar shell for OH 26.5 + 0.6 which is consistent with the infrared and submillimeter observations. The dust and gas data are well fitted by a two-shell model, consisting of a dense shell surrounded by a more tenuous shell. The former we identify with the superwind (M = 5.5 x 10(exp -4) solar mass/ yr), and the latter we identify with mass loss on the asymptotic giant branch (AGB) (M = 10(exp -6) solar mass/ yr). The transition between the two mass-loss phases is shown to be rather abrupt ((Delta)t less than 150 yr). Depending on the mass of the progenitor, this superwind phase may be the last thermal pulse (for M(sub *) less than 1.5 solar mass), or the first of a series of the superwind phases (for up to 8 solar mass), punctuated by a period of low mass-loss rates, before the star evolves off the AGB.

Justtanont, K.↗

Unveiling the Journey of A Highly Inclined CME: Insights from the March 13, 2012, Event With 110° Longitudinal Separation

Context. A fast (∼2000 km s -1 ) and wide (>110°) coronal mass ejection (CME) erupted from the Sun on March 13, 2012. Its interplanetary counterpart was detected in situ two days later by STEREO-A and near-Earth spacecraft, such as ACE, Wind, and Cluster. We suggest that at 1 au the CME extended at least 110° in longitude, with Earth crossing its east flank and STEREO-A crossing its- west flank. Despite their separation, measurements from both positions showed very similar in situ CME signatures. The solar source region where the CME erupted was surrounded by three coronal holes (CHs). Their locations with respect to the CME launch site were east (negative polarity), southwest (positive polarity) and west (positive polarity). The solar magnetic field polarity of the area covered by each CH matches that observed at 1 au in situ. Suprathermal electrons at each location showed mixed signatures with only some intervals presenting clear counter streaming flows as the CME transits both locations. The strahl population coming from the shortest magnetic connection of the structure to the Sun showed more intensity. Aims. The aim of this work is to understand the propagation and evolution of the CME and its interaction with the surrounding CHs, to explain the similarities and differences between the observations at each spacecraft, and report what one of the most longitudinal expanded CME structures measured in situ would be. Methods. Known properties of the large-scale structures from a variety of catalogues and previous studies were used to have a better overview of this particular event. In addition, multipoint observations were used to reconstruct the 3D geometry of the CME and determine the context of the solar and heliospheric conditions before the CME eruption and during its propagation. The graduated cylindrical shell model (GCS) was used to reproduce the orientation, size and speed of the structure with a simple geometry. Also, the Drag-Based Model (DBM) was utilised to understand the conditions of the interplanetary medium better in terms of the drag undergone by the structure while propagating in different directions. Finally, a comparative analysis of the different regions of the structure through the different observatories was carried out in order to directly compare the in situ plasma and magnetic field properties at each location. Results. The study presents important findings regarding the in situ measured CME on March 15, 2012, detected at a longitudinal separation of 110° in the ecliptic plane despite its initial inclination being around 45° when erupted (March 13). This suggests that the CME may have deformed and/or rotated, allowing it to be observed near its legs with spacecraft at a separation angle greater than 100°. The CME structure interacted with high-speed streams generated by the surrounding CHs. The piled-up plasma in the sheath region exhibited an unexpected correlation in magnetic field strength despite the large separation in longitude. In situ observations reveal that at both locations there was a flank encounter – where the spacecraft crossed the first part of the CME – then encountered ambient solar wind, and finally passed near the legs of the structure. Conclusions. A scenario covering all evidence is proposed for both locations with a general view of the whole structure and solar wind conditions. Also, the study shows the necessity of having multipoint observations of large-scale structures in the heliosphere.

methods: data analysis↗

The pick-up of cometary protons by the solar wind

The HERS detector of the Ion Mass Spectrometer on the Giotto spacecraft measured the 3 dimensional distribution of picked-up cometary protons over a distance of 6 million km upstream of the bow shock. The protons are elastically scattered out of their original cycloidal trajectories such that they are nonuniformly distributed over a spherical shell in velocity space. The shell thickness increases as the bow shock is approached. Inside the shock, the cometary protons are difficult to distinguish from the heated solar wind protons.

Neugebauer, M.↗

Dense nanoimprinted silicon nanowire arrays with passivated axial p-i-n junctions for photovoltaic applications

We report on the fabrication and photovoltaic characteristics of vertical arrays of silicon axial p-i-n junction nanowire (NW) solar cells grown by vapor-liquid-solid (VLS) epitaxy. NW surface passivation with silicon dioxide shell is shown to enhance carrier recombination time, open-circuit voltage (V{sub OC}), short-circuit current density (J{sub SC}), and fill factor (FF). The photovoltaic performance of passivated individual NW and NW arrays was compared under 532 nm laser illumination with power density of ∼10 W/cm{sup 2}. Higher values of V{sub OC} and FF in the NW arrays are explained by enhanced light trapping. In order to verify the effect of NW density on light absorption and hence on the photovoltaic performance of NW arrays, dense Si NW arrays were fabricated using nanoimprint lithography to periodically arrange the gold seed particles prior to epitaxial growth. Compared to sparse NW arrays fabricated using VLS growth from randomly distributed gold seeds, the nanoimprinted NW array solar cells show a greatly increased peak external quantum efficiency of ∼8% and internal quantum efficiency of ∼90% in the visible spectral range. Three-dimensional finite-difference time-domain simulations of Si NW periodic arrays with varying pitch (P) confirm the importance of high NW density. Specifically, due to diffractive scattering and light trapping, absorption efficiency close to 100% in the 400–650 nm spectral range is calculated for a Si NW array with P = 250 nm, significantly outperforming a blanket Si film of the same thickness.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Preparation of morphology-controlled TiO{sub 2} nanocrystals for the excellent photocatalytic activity under simulated solar irradiation

Graphical abstract: Morphology-controlled TiO{sub 2} nanocrystals with excellent photocatalytic activity under simulated solar irradiation were successfully synthesized. - Highlights: • TiO{sub 2} nanocrystals (NCs) with different morphologies were synthesized. • The growth mechanism of morphology-controlled TiO{sub 2} NCs was proposed. • The core-shell structured TiO{sub 2} NCs (co-TiO{sub 2}) had a narrow band gap (2.67 eV). • The co-TiO{sub 2} NCs possessed excellent photocatalytic activity and recyclability. - Abstract: A simple synthetic approach based on solvothermal technique and hydrogenation was developed for preparation of TiO{sub 2} nanocrystals with different morphologies such as elongated rhombic, dog-bone, oval and core-shell structured oval. The effect of oleic acid (OA) and oleylamine (OM) as two capping surfactants on the growth of TiO{sub 2} nanocrystals was investigated. The physicochemical properties of the obtained samples were characterized by various techniques including TEM, XRD, UV–vis absorption, Raman, XPS, BET, PL and photocurrent measurement. In photodegradation of RhB under simulated solar irradiation, the oval-shaped TiO{sub 2} nanocrystals with core-shell structure (co-TiO{sub 2}) was superior to other TiO{sub 2} nanocrystals in catalytic activity. Moreover, the co-TiO{sub 2} nanocrystals exhibited well recyclability during multiple photocatalytic tests. These excellent properties of co-TiO{sub 2} were attributed to its special structure, including lattice-disordered surface layer and well-crystallized lattice core, and narrow band gap (2.67 eV).

36 MATERIALS SCIENCE↗