Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Capillary pressure-saturation relations in quartz and carbonate sands: Limitations for correlating capillary and wettability influences on air, oil, and supercritical CO 2 trapping

Capillary pressure (P c )-saturation (S w ) relations are essential for predicting equilibrium and flow of immiscible fluid pairs in soils and deeper geologic formations. In systems that are difficult to measure, behavior is often estimated based on capillary scaling of easily measured P c –S w relations (e.g., air-water, and oil-water), yet the reliability of such approximations needs to be examined. In this study, 17 sets of brine drainage and imbibition curves were measured with air-brine, decane-brine, and supercritical (sc) CO 2 -brine in homogeneous quartz and carbonate sands, using porous plate systems under ambient (0.1 MPa, 23°C) and reservoir (12.0 MPa, 45°C) conditions. Comparisons between these measurements showed significant differences in residual nonwetting phase saturation, S nw,r . Through applying capillary scaling, changes in interfacial properties were indicated, particularly wettability. With respect to the residual trapping of the nonwetting phases, S nwr, CO2 > S nwr, decane > S nwr, air . Decane-brine and scCO 2 -brine Pc–Sw curves deviated significantly from predictions assuming hydrophilic interactions. Moreover, neither the scaled capillary behavior nor S nw,r for scCO 2 -brine were well represented by decane-brine, apparently because of differences in wettability and viscosities, indicating limitations for using decane (and other organic liquids) as a surrogate fluid in studies intended to apply to geological carbon sequestration. Thus, challenges remain in applying scaling for predicting capillary trapping and multiphase displacement processes across such diverse fields as vadose zone hydrology, enhanced oil recovery, and geologic carbon sequestration.

58 GEOSCIENCES↗
DOE OSTI2020

Loamy sand soil approaches organic carbon saturation after 37 years of conservation tillage

Conservation tillage is reported to increase soil organic carbon (SOC) and total nitrogen (TN) contents, but long-term (>30 yr) field results quantifying the responses in Coastal Plain Ultisols are sparse. The distribution, accumulation, and topsoil storage of SOC and TN after 37 yr of crop production using conventional (CvT) or conservation tillage (CnT) on a Norfolk loamy sand (fine-loamy, kaolinitic, thermic, Typic Kandiudults) were quantified. Soil samples were collected annually from the 0-5-, 5-10-, and 10-15-cm depth increments beneath corn (Zea mays L.), soybean [Glycine max (L.) Merr.], and cotton (Gossypium hirsutum L.) crops. Overall, SOC and TN accumulation in the 0-5-cm depth were highest for Norfolk soil under CnT. Focusing on total long-term changes for the 0-15-cm sampling depth beneath various corn crops shows that CnT and CvT sequestered 24.7 and 21.4 Mg C ha -1 , respectively. Between 1978 and 2016, there was a highly significant (P < .0001) exponential increase in SOC within the top 5-cm soil depth. However, the exponential curves began to plateau suggesting the Norfolk topsoil was approaching its organic carbon (OC) storage capacity. These field measurements strongly indicate that additional topsoil SOC increases with current tillage and crop management practices are limited.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Microbial communities and biogeochemical functioning across peatlands in the Athabasca Oil Sands region of Canada: Implications for reclamation and management

Abstract Peatlands play an important role in global biogeochemical cycles and are essential for multiple ecosystem functions. Understanding the environmental drivers of microbial functioning and community structure can provide insights to enable effective and evidence‐based management. However, it remains largely unknown how microbial diversity contributes to the functioning of belowground processes. Addressing this gap in knowledge will provide a better understanding of microbial‐mediated processes in peatlands that are undergoing restoration or reclamation. This study assessed the changes in microbial community diversity and structure as well as soil function by measuring microbial respiration on a range of substrates from three natural fen types found in the Athabasca Oil Sands region of Alberta, Canada (a poor fen, a hypersaline fen, and a tree‐rich fen) and a nearby constructed fen undergoing reclamation following open pit mining. Overall, substrate induced respiration was significantly higher in the constructed fen. Alpha diversity of fungi and prokaryotes was highest in the tree‐rich fen, and the composition of microbial communities was significantly different between fens. Both fungal and prokaryotic communities were strongly related to pore water pH and temperature, with plant richness also contributing to the shape of fungal communities. In summary, microbial community structure reflects the underlying differences in soil condition across different fens but plays essential roles in the ecological functions of soil. These findings provide a new outlook for the management of peatlands undergoing post‐mining reclamation. Future research on peatland reclamation should consider the dynamic interaction between communities and ecosystem functionality, for which this study forms a useful baseline.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Oxidation and Ignition Behaviors of Molten Mg-Nd-Zr Alloy in Resin-Sand Mold

High-temperature oxidation behavior of molten Mg-Nd-Zr in the pyrolysis atmosphere of resin-bind sand mold was investigated. The results showed that pouring temperature higher than 1023 K would sharply increase the ignition risk of melt in mold. The oxide formed on Mg-Nd-Zr melt below 973 K consists of two layers: mainly MgO for outer layer; mixture of MgO and Nd{sub 2}O{sub 3} for inner layer. The inner oxide mixture layer played an essential role in the protection of Mg-Nd-Zr matrix. Based on the experimental results and thermodynamic analysis, the oxidation process containing three stages was proposed. Nd- and Zn-enriched zone was found at the subsurface of oxide scale, without the enrichment of Zr. DICTRA calculation results indicated that this phenomenon was caused by the depletion of Mg and up-hill diffusion of Zr. Thus, Zr showed limited protection to the melt in long-term oxidation.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Fallout melt debris and aerodynamically-shaped glasses in beach sands of Hiroshima Bay, Japan

An intricate association of millimeter-sized, aerodynamically-shaped debris, including glass spherules, glass filaments, and composite-fused melt particles was recovered from beach sands on the shores of the Motoujina Peninsula in Hiroshima Bay, Japan. Based on optical microscopy, this debris comprises six morphological groups ranging from clear glasses to rubber-like constituents. Scanning electron microscopy and synchrotron X-ray microdiffraction revealed dominant aluminum, silicon and calcium (Al-Si-Ca) elemental composition with some iron, mainly in glass, associated with precipitates of mullite and anorthite microcrystals, hematite dendrites and iron-chromium globules, indicative of original temperature conditions >1800 °C. Aerodynamically-shaped fallout debris, including glass spherules described in this study, are generally produced by single high-energy catastrophic events, such as an extraterrestrial body impacting Earth or a nuclear explosion. Our work interprets the large volumes of fallout debris generated under extreme temperature conditions as products of the Hiroshima August 6th, 1945 atomic bomb aerial detonation. The chemical composition of the melt debris provides clues to their origin, particularly with regard to city building materials. This study is the first published record and description of fallout resulting from the destruction of an urban environment by atomic bombing.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Precipitation behavior near shrinkage porosity in a large sand casting of Haynes 282 alloy

The precipitation behavior of L1 2 structure Ni 3 (Al,Ti)-type γ' precipitates near shrinkage porosity in a large sand casting of Haynes 282 alloy has been investigated by scanning/transmission electron microscopy in conjunction with energy dispersive x-ray spectroscopy. The experimental results revealed that in the carbonitride-rich region close to the shrinkage porosity, γ' precipitates could still form with comparable sizes though at lower volume density than those in the general cast Ni matrix. The resulting γ' precipitates had a very high Al/Ti ratio. Close to oxide-rich pore surfaces, an absence of γ' precipitates was observed due to Al and Ti depletion by forming Al oxides and Ti carbonitrides, respectively. This work suggests that Al rather than Ti plays a dominant role in the formation of γ' precipitates in porous regions in cast Haynes 282 alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Centrifuge modeling of lateral bearing behavior of offshore wind turbine with suction bucket foundation in sand

Suction bucket foundation is a promising alternative for offshore wind turbine foundations. The lateral bearing behavior and failure mechanism are significant topics for optimizing its design criteria. In this study, a group of centrifuge tests were performed to investigate the lateral bearing capacity of suction bucket foundation with three aspect ratios. Force-controlled lateral static and cyclic tests were performed at a centrifuge acceleration of 50g. Four soil conditions were considered in centrifuge tests with a combination of loose/dense and dry/saturated sand. The load-displacement and the stiffness-displacement relationships are presented in the paper, and it is concluded that the lateral bearing capacity can be reached when the normalized lateral displacement (displacement divided by the bucket diameter) reached 3% as the first method. Displacement rates are plotted against the lateral load to give the second method for defining the ultimate lateral capacity. In cyclic tests, the lateral displacement and stiffness are correlated to the cycle numbers in the first 5 cycles, but the change is less apparent in the rest. The results demonstrated the behavior of bucket foundation in service conditions. Finally, a simplified calculation method is used as the third method and checked with tests results.

17 WIND ENERGY↗
DOE OSTI2012

Asian sand dust enhances murine lung inflammation caused by Klebsiella pneumoniae

Inhaling concomitants from Asian sand dust (ASD) may result in exacerbation of pneumonia by the pathogen. The exacerbating effect of ASD on pneumonia induced by Klebsiella pneumoniae (KP) was investigated in ICR mice. The organic substances adsorbed onto ASD collected from the atmosphere of Iki-island in Japan were excluded by heat treatment at 360 °C for 30 min. ICR mice were instilled intratracheally with ASD at doses of 0.05 mg or 0.2 mg/mouse four times at 2-week intervals (total dose of 0.2 mg or 0.8 mg/mouse) and were administrated with ASD in the presence or absence of KP at the last intratracheal instillation. Pathologically, ASD caused exacerbation of pneumonia by KP as shown by increased inflammatory cells within the bronchiolar and the alveolar compartments. ASD enhanced the neutrophil number dose dependently as well as the expression of cytokines (IL-1β, IL-6, IL-12, IFN-γ, TNF-α) and chemokines (KC, MCP-1, MIP-1α) related to KP in BALF. In an in vitro study using RAW264.7 cells, combined treatment of ASD and KP increased gene expression of IL-1β, IL-6, IFN-β, KC, MCP-1, and MIP-1α. The same treatment tended to increase the protein level of IL-1β, TNF-α and MCP-1 in a culture medium compared to each treatment alone. The combined treatment tended to increase the gene expression of Toll-like receptor 2 (TLR2), and NALP3, ASC and caspase-1 compared with KP alone. These results suggest that the exacerbation of pneumonia by ASD + KP was due to the enhanced production of pro-inflammatory mediators via activation of TLR2 and NALP3 inflammasome pathways in alveolar macrophages.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

Consolidation and Permeability of the B1 and D1 Gas Hydrate Bearing Sands and Associated Seal Sediments of the Extended-Duration Gas Production Test Site on the Alaska North Slope

Gas hydrate, a solid combination of gas (mostly methane in nature) and water molecules stable at low temperatures and elevated pressures, occurs naturally in marine and permafrost-associated environments. Gas hydrate reservoirs, such as those in the Alaska North Slope, have been considered potential energy resources for gas production. To understand the petrophysical and geo-mechanical characteristics of the reservoir, core samples retrieved from the site of the JOGMEC-DOE-USGS collaborative gas hydrate R&D project have been analyzed in the laboratory for their hydraulic and mechanical properties. This paper focuses on both seal and reservoir samples associated with the B1 and D1 sands, which are evaluated for index properties (including porosity, grain size distribution, liquid and plastic limits, specific surface area, and specific gravity), consolidation, permeability, and water retention. Furthermore, the reservoir core samples were tested with pore-filling, laboratory-grown tetrahydrofuran hydrate, in order to assess reservoir behavior during gas production from hydrates. Under simulated in situ stress conditions, the seal and hydrate-free reservoir cores had a permeability anisotropy ratio of k h /k v = 3.0−5.0, and k h /k v = 2.4−3.0 for the reservoir tetrahydrofuran hydrate-bearing cores. The data suggest that depressurizing the reservoir to induce hydrate dissociation alters the reservoir effective permeability in three ways: permeabilities decrease due to porosity lost (e.g., the initial reservoir thickness can decrease by up to 5% upon 7 MPa depressurization), permeability increases due to the loss of solid hydrate in the pore space, and permeability anisotropy k h /k v decreases in response to the evolving pore-space geometry. We show that given the simulated in situ gas hydrate saturations (i.e., S h = 32% in core 7P-2E and S h = 21% in core 20P-4), gas production from the dissociation of tetrahydrofuran hydrate in the two tested cores results in a net increase in effective permeability and a decrease in k h /k v . This study highlights the importance of investigating seal and reservoir sediments and the impacts of depressurization on the porosity and permeability responses during production.

Geological materials↗
DOE OSTI2015

Correction to Capillary Pressure–Saturation Relations for Supercritical CO 2 and Brine in Limestone/Dolomite Sands: Implications for Geologic Carbon Sequestration in Carbonate Reservoirs

Our previous publication on capillary pressure-saturation (P c -S w ) relations in carbonate sands contained P c values that were offset from their true equilibrium values. Original Figures 2, 3, and 4 showed nonequilibrium P c values that were close to the intended equilibrium P c . The modified figures using the equilibrium P c data are shown below. Other elements of the original paper and its conclusions remain unaffected. Further corrections to the Supporting Information are also available. We apologize for the inconvenience caused to readers.

58 GEOSCIENCES↗
DOE OSTI2018

The Relative Importance of Saturated Silica Sand Interfacial and Pore Fluid Geochemistry on the Spectral Induced Polarization Response

Adsorption at the solid-pore fluid interface is a key mechanism controlling the mobility of nutrients and contaminants in subsurface soils and sediments. The spectral induced polarization (SIP) method has been shown to be sensitive to the quantity and type of adsorbed ions. Extending previous results, we investigated the relevance of pH, solution conductivity, and ion type on the SIP response of saturated silica sand. We also performed adsorption experiments to evaluate whether adsorption plays a relevant role on the effect of saturating solution conductivity and pH. Given their environmental relevance and different electrochemical characteristics, we focused on exploring the influence of Cu 2+ and Na + adsorption on the SIP signature. The adsorption results confirm the expected and modeled pH influence on the adsorption of both Cu 2+ and Na + . The measured quadrature conductivity spectra indicate that pH and solution conductivity control the electrical double layer electrochemical state and its capacitive behavior. On the contrary, no appreciable SIP signal changes are associated with ion substitution. The adsorption experiments highlight low values of site occupancy for Na and Cu, which suggests that the effects of pH and fluid conductivity are unrelated to their control on the ion adsorption. We interpret the solution conductivity as a proxy for ionic strength. The relative importance of pH and solution conductivity over ion type helps to further constrain the interpretation of SIP results in field geochemical and biogeochemical characterization and monitoring.

58 GEOSCIENCES↗
DOE OSTI2021

Additive manufacturing of strong silica sand structures enabled by polyethyleneimine binder

Abstract Binder Jet Additive Manufacturing (BJAM) is a versatile AM technique that can form parts from a variety of powdered materials including metals, ceramics, and polymers. BJAM utilizes inkjet printing to selectively bind these powder particles together to form complex geometries. Adoption of BJAM has been limited due to its inability to form strong green parts using conventional binders. We report the discovery of a versatile polyethyleneimine (PEI) binder for silica sand that doubled the flexural strength of parts to 6.28 MPa compared with that of the conventional binder, making it stronger than unreinforced concrete (~4.5 MPa) in flexural loading. Furthermore, we demonstrate that PEI in the printed parts can be reacted with ethyl cyanoacrylate through a secondary infiltration, resulting in an increase in flexural strength to 52.7 MPa. The strong printed parts coupled with the ability for sacrificial washout presents potential to revolutionize AM in various applications including construction and tooling.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Synthesis and characterization of black, red and yellow nanoparticles pigments from the iron sand

The aim of this research is to synthesize nanoparticles of black pigment of Magnetite (Fe{sub 3}O{sub 4}), red pigment of hematite (α-Fe{sub 2}O{sub 3}), and yellow pigment of ghoetite (α-FeOOH) from the iron sand. The black pigment of Fe{sub 3}O{sub 4} and the yellow pigment α-FeOOH nanoparticles were synthesized by coprecipitation method with variation of pH. Whereas, the red pigment Fe{sub 2}O{sub 3} was synthesized by sintering Fe{sub 3}O{sub 4} nanoparticles at temperature between 400 °C and 700 7°C for 1 hour. All the pigments has been characterized using X-ray diffraction and SEM. The XRD results shown that the particle size of the black pigmen Fe{sub 3}O{sub 4}, red pigment Fe{sub 3}O{sub 4} and yellow pigment α-FeOOH are around 12, 32, and 30 nm respectively. The particle size of Fe{sub 2}O{sub 3} nanoparticles increase by increasing sintering temperature from 32 nm at 400 °C to 39 nm at 700 °C. For yellow pigment of α-FeOOH, the particle size increase by increasing pH from 30,54 nm at pH 4 to 48,60 nm at pH 7. The SEM results shown that the morphologies of black, yellow and red pigments are aglomarated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Seismic response to paleo-sand dunes in the Nugget Sandstone Formation, southwestern Wyoming

We have analyzed a 3D seismic survey acquired for a carbon sequestration project on top of the Moxa Arch in southwestern Wyoming. We observed a zone of discontinuous reflectors on vertical slices of seismic amplitude volume, whereas, the northwest–southeast lineations were observed on the time slices. We performed a seismic to well tie that suggested that the lineations occur within the Nugget Sandstone. The Nugget Sandstone is an eolian sandstone deposit of Early Jurassic age, deposited as a subtropical dune field, and equivalent to the Navajo Sandstone of southwestern Utah. Petrophysical analysis indicates that the Nugget Sandstone is dominated by clean sandstone (70%–80%), whereas evaporites, including halite and anhydrite, are present in certain zones. Previous outcrop studies on the Navajo Sandstone indicate the wind direction to be predominantly northeast–southwest. Seismic attributes, including coherence and curvature, displayed on stratal slices within the Nugget Sandstone interval indicate the presence of lineations in the northwest–southeast direction with irregular spacing. These lineations are approximately perpendicular to the inferred dominant wind direction. We computed the dominant wind direction from the average azimuth of the lineations as seen on the curvature attribute in the Nugget Sandstone interval. Geological feature: Eolian sand dunes with interdunal evaporites Seismic appearance: Parallel lineations with irregular spacing on seismic attribute horizon slices Alternative interpretations: Canyons at continental slopes; slope failures Features with a similar appearance: Marine bars; contourites Formation: The Nugget Sandstone — equivalent to the Navajo Sandstone Age: Early Jurassic Location: Moxa Arch, Wyoming Seismic data: Obtained by the University of Wyoming with U.S. DOE funding Contributors: Dhruv Agrawal, Brady Lujan, Sumit Verma, Shuvajit Bhattacharya, and Subhashis Mallick Analysis tools: Coherence and curvature attributes; seismic inversion; petrophysical inversion

Geochemistry & Geophysics↗
DOE OSTI2022

Transport and Retention of Particulate Organic Matter in Sand: Lab Experiments and Modelling

Flow-through reactor (FTR) experiments were conducted at three different downward vertical flow rates to study the transport and retention of particulate organic matter (Chlorella powder) in riverbed sediments. This data package includes data files (.csv) regarding effluent collected from the FTRs during the experiments (time, duration, volume of each sample collection; concentration of nonreactive bromide tracer; concentration of suspended Chlorella determined by absorbance measurements) and sediment (sand) slices collected from the FTRs after the experiments (mass of Chlorella retained in 1 cm depth intervals determined by loss-on-ignition method). More detailed descriptions of data are provided in the data dictionary, and detailed methods are available in the associated MSc thesis listed in ‘Related References.’ The data dictionary and file level meta data (FLMD) are included in the data package as both .csv and .xlsx files. This data package also includes timelapse videos (.mp4) of the experiments, and modelling scripts associated with the experiments. The modelling scripts are included as MATLAB ‘live scripts’ (.mlx, which can be run using MATLAB), and are also included as .pdf and .html files with output plots included (which can be viewed without a MATLAB license and installation). The data files and modelling scripts are organized into a .zip folder for each of the three FTR experiments (three flow rates).

54 ENVIRONMENTAL SCIENCES↗