Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “S WAVES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Performance of a small, graphite electrode, multistage depressed collector with a 500-W, continuous wave, 4.8- to 9.6-GHz traveling wave tube

A small, isotropic graphite multistage depressed collector (MDC) and a short permanent magnet refocuser were designed, fabricated, and evaluated in conjunction with a 500-W, continuous-wave (CW), 4.8 to 9.6 GHz traveling wave tube (TWT). A novel performance optimization system and technique were used to optimize the TWT-MDC performance for saturated broad-band operation. The MDC performance was evaluated in both four- and three-stage configurations. Average TWT overall and four-stage collector efficiencies of 43.8 and 82.6 percent, respectively, were obtained for saturated octave-bandwidth operation. The isotropic graphite electrode material performed well, and shows considerable promise. However, considerably more test experience is required before definitive conclusions on its suitability for space and airborne TWT's can be made.

Ramins, Peter↗
NASA NTRS1987

Electric field and plasma density measurements in the strongly driven daytime equatorial electrojet. I - The unstable layer and gradient drift waves. II - Two-stream waves

The results of electric field and plasma density measurements in the strongly driven daytime equatorial electrojet over Peru, made during the March 1983 Condor electrojet experiment from Punta Lobos, Peru, are discussed together with the rocket instrumentation used for the measurements and the pertinent payload dynamics. The overall characteristics of the irregularity layer observed in situ in the electrojet are described. Special consideration is given to the waves generated by the gradient drift instability (observed between 90 and 106.5 km) and to primary and secondary two-stream waves detected by the two probes on the topside between 103 and 111 km, where the electron current was considered to be strongest.

Pfaff, R. F.↗
NASA NTRS1988

Ion-ion waves in the auroral region - Wave excitation and ion heating

The properties of the ion-ion mode which is excited in plasmas when two or more cold ion beams are streaming relative to one another are investigated assuming a warm electron distribution at rest (the model consistent with particle distributions observed in auroral plasma cavities). Numerical solutions are derived for the generalized electrostatic dispersion equation for parallel propagation and for oblique propagation of ion waves. It is shown that the relative ion temperature and concentration have significant effects on the stability of the accelerated plasma and the expected ion heating. Finally, a relationship between ion drift and thermal speed is derived using the marginal stability of ion-ion waves for nonzero ion temperature; the relationship was found to compare favorably with DE-1 ion observations at the high-altitude boundary of the auroral cavity.

Dusenbery, P. B.↗
NASA NTRS1988

A theory for the radiation of magnetohydrodynamic surface waves and body waves into the solar corona

The Green's function for the slab coronal hole is obtained explicitly. The Fourier integral representation for the radiated field inside and outside the coronal hole waveguide is obtained. The radiated field outside the coronal hole is calculated using the method of steepest descents. It is shown that the radiated field can be written as the sum of two contributions: (1) a contribution from the integral along the steepest descent path and (2) a contribution from all the poles of the integrand between the path of the original integral and the steepest descent path. The free oscillations of the waveguide can be associated with the pole contributions in the steepest descent representation for the Green's function. These pole contributions are essentially generalized surface waves with a maximum amplitude near the interface which separates the plasma inside the coronal hole from the surrounding background corona. The path contribution to the integral is essentially the power radiated in body waves.

Davila, Joseph M.↗
NASA NTRS1988

Lower hybrid waves upstream of comets and their implications for the Comet Halley 'bow wave'

Observed and theoretical features concerning the nature of so-called cometary 'bow shocks' or 'bow waves' are discussed. Collective plasma effects associated with the presence of pickup ring ions (protons and water ions) in the vicinity of the supermagnetosonic to submagnetosonic transition region in the quasi-perpendicular limit are considered; the linear and nonlinear evolution of instabilities around the lower hybrid frequency is emphasized. It is shown that lower hybrid waves can lead to heating and produce distributions with magnitudes in reasonable agreement with Giotto data. The implications to the existence and structure of cometary bow shocks are discussed.

Hizanidis, K.↗
NASA NTRS1989

Design, fabrication, and performance of brazed, graphite electrode, multistage depressed collectors with 500-W, continuous wave, 4.8- to 9.6-GHz traveling-wave tubes

A small, isotropic graphite electrode, multistage depressed collector (MDC) was designed, fabricated, and evaluated in conjunction with a 500-W, continuous wave (CW), 4.8- to 9.6-GHz traveling-wave tube (TWT). The carbon electrode surfaces were used to improve the TWT overall efficiency by minimizing the secondary electron emission losses in the MDC. The design and fabrication of the brazed graphite MDC assembly are described. The brazing technique, which used copper braze filler metal, is compatible with both vacuum and the more commonly available hydrogen atmosphere brazing furnaces. The TWT and graphite electrode MCC bakeout, processing, and outgassing characteristics were evaluated and found to be comparable to TWT's equipped with copper electrode MDC's. The TWT and MDC performance was optimized for broadband CW operation at saturation. The average radiofrequency (RF), overall, and MDC efficiencies were 14.9, 46.4, and 83.6 percent, respectively, across the octave operating band. A 1500-hr CW test, conducted without the use of an appendage ion pump, showed no gas buildup and excellent stability of the electrode surfaces.

Ramins, Peter↗
NASA NTRS1988

Theory for synthetic aperture radar imaging of the ocean surface - With application to the Tower Ocean Wave and Radar Dependence experiment on focus, resolution, and wave height spectra

A one-dimensional model for simulating azimuthal SAR imaging of the ocean surface is developed which can admit both the 'distributed surface' and 'velocity bunching' approaches. Computer simulations demonstrate that the time-dependent modulation patterns due to the radar cross section variation and the velocity bunching effects provide optimum focusing around half the phase velocity of the long wave. The results indicate that in the Tower Ocean Wave and Radar Dependence experiment, SAR imaging at L band is approximately linear.

Kasilingam, Dayalan P.↗
NASA NTRS1988

The effect of lower-hybrid waves on the propagation of hydromagnetic waves

The two-fluid plasma equations are used to model the interaction of hydromagnetic waves (HMWs) in a magnetic plasma with lower-hybrid waves (LHWs) propagating perpendicular to the magnetic field. The derivation of the governing equations is given in detail, and numerical results are presented in extensive graphs. It is shown that, when the angle between the HMW and LHW propagation directions is small, the HMWs can be excited, with the energy propagating nearly parallel to the LHW direction. The implications of these findings for the geomagnetic tail are briefly discussed.

Hamabata, Hiromitsu↗
NASA NTRS1989

On the generation of flux tube waves in stellar convection zones. I - Longitudinal tube waves driven by external turbulence

The source functions and the energy fluxes for wave generation in magnetic flux tubes embedded in an otherwise magnetic field-free, turbulent, and compressible fluid are derived. The calculations presented here assume that the tube interior is not itself turbulent, e.g., that motions within the flux tube are due simply to external excitation. Specific results for the generation of longitudinal tube waves are presented.

Musielak, Z. E.↗
NASA NTRS1989

Interfacial wave theory for dendritic structure of a growing needle crystal. I - Local instability mechanism. II - Wave-emission mechanism at the turning point

The complicated dendritic structure of a growing needle crystal is studied on the basis of global interfacial wave theory. The local dispersion relation for normal modes is derived in a paraboloidal coordinate system using the multiple-variable-expansion method. It is shown that the global solution in a dendrite growth process incorporates the morphological instability factor and the traveling wave factor.

Xu, Jian-Jun↗
NASA NTRS1990

Simulation studies of plasma waves in the electron foreshock - The generation of Langmuir waves by a gentle bump-on-tail electron distribution

Particle simulation experiments were used to study the basic physical ingredients needed for building a global model of foreshock wave phenomena. In particular, the generation of Langmuir waves by a gentle bump-on-tail electron distribution is analyzed. It is shown that, with appropriately designed simulations experiments, quasi-linear theory can be quantitatively verified for parameters corresponding to the electron foreshock.

Dum, C. T.↗
NASA NTRS1990

The electric field induced by a gravitational wave in a superconductor - A principle for a new gravitational wave antenna

This paper investigates the effect of gravitational waves on a superconductor. It is found that the key properties of a superconductor, namely zero resistance and perfect diamagnetism, give rise to an important new effect, the presence of an induced electric field E in the interior of the superconductor. The E field reacts with the ions and superelectrons. It is argued that the induced E field might provide a significantly more sensitive means of detecting gravitational waves. It appears likely that existing resonant-mass superconducting antennas with L about 3m, Q about 10 to the 8th could be readily modified to detect E fields induced by GWs of dimensionless amplitude h about 10 to the -24th.

Peng, Huei↗
NASA NTRS1991

A comparison of time domain boundary conditions for acoustic waves in wave guides

Researchers consider several types of boundary conditions in the context of time domain models for acoustic waves. Experiments with four different duct terminations (hard wall, free radiation, foam, and wedge) were carried out in a wave duct from which reflection coefficients over a wide frequency range were measured. These reflection coefficients were used to estimate parameters in the time domain boundary conditions. A comparison of the relative merits of the models in describing the data is presented. Boundary conditions which yield a good fit of the model to the experimental data were found for all duct terminations except the wedge.

Banks, H. T.↗
NASA NTRS1990

Wave pressure in stellar atmospheres due to shock wave trains

Analytic expressions for the wave pressure of propagating shock wave trains in stellar atmospheres or winds are derived. Applications to weak shocks and stronger shocks with sawtooth profiles are discussed in detail. The shocks are treated as discontinuities. The results provide insight in the momentum balance of time-dependent stellar wind flows. The analytic expressions can be used as an independent test of hydrodynamic codes.

Gail, H.-P.↗
NASA NTRS1991

An adjustable RF tuning element for microwave, millimeter wave, and submillimeter wave integrated circuits

Planar RF circuits are used in a wide range of applications from 1 GHz to 300 GHz, including radar, communications, commercial RF test instruments, and remote sensing radiometers. These circuits, however, provide only fixed tuning elements. This lack of adjustability puts severe demands on circuit design procedures and materials parameters. We have developed a novel tuning element which can be incorporated into the design of a planar circuit in order to allow active, post-fabrication tuning by varying the electrical length of a coplanar strip transmission line. It consists of a series of thin plates which can slide in unison along the transmission line, and the size and spacing of the plates are designed to provide a large reflection of RF power over a useful frequency bandwidth. Tests of this structure at 1 GHz to 3 Ghz showed that it produced a reflection coefficient greater than 0.90 over a 20 percent bandwidth. A 2 GHz circuit incorporating this tuning element was also tested to demonstrate practical tuning ranges. This structure can be fabricated for frequencies as high as 1000 GHz using existing micromachining techniques. Many commercial applications can benefit from this micromechanical RF tuning element, as it will aid in extending microwave integrated circuit technology into the high millimeter wave and submillimeter wave bands by easing constraints on circuit technology.

Lubecke, Victor M.↗
NASA NTRS1993

Nonlinear wave-wave interactions in the subauroral ionosphere on the basis of ISIS-2 satellite observations of Siple station VLF signals

Nonlinear wave-wave interaction between signals from a ground-based VLF transmitter and narrow-band ELF emissions in the subauroral ionosphere is studied by means of the bispectrum and bicoherence analysis. A bicoherence analysis has indicated that the sideband structures around the Siple transmitter signal received onboard the ISIS satellite are due to the nonlinear interaction between the Siple VLF signal and the pre-existing ELF emission.

Ohnami, S.↗
NASA NTRS1993

Silicon micromachined waveguides for millimeter-wave and submillimeter-wave frequencies

Rectangular waveguide is commonly used up to high millimeter-wave frequencies. However, conventional machining techniques for waveguides operating above a few hundred GHz are complicated and costly. The development of silicon micro-machining techniques to create silicon-based waveguide circuits, which can operate up to high submillimeter-wave frequencies, is reported. As a first step, WR-10 waveguide has been fabricated from (110) silicon wafers. Insertion loss measurements of gold plated silicon waveguide show performance comparable to standard metal waveguides. It is suggested that active devices and planar circuits can be integrated with the waveguides, solving the traditional mounting problems.

Mcgrath, William R.↗