SEARCH · Engineering Papers

Results for “Requirements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1951

Spark Ignition of Flowing Gases. 2: Effect of Electrode Parameters on Energy Required to Ignite a Propane-Air Mixture

Research was conducted to determine the effect of the electrode parameters of spacing, configuration, and material' on the energy required for ignition of a flowing propane-air mixture. In addition, the data were used to indicate the energy distribution along the spark length and to confirm previous observations concerning the effect of spark duration on ignition energy requirements. The data were obtained with a mixture at a fuel-air ratio of 0.0835 (by weight), a pressure of 3 inches of mercury absolute, a temperature of 80 F, and a mixture velocity of 5 feet per second. Results showed that the energy required for ignition decreased as the electrode spacing was increased; a minimum energy occurred at. a spacing of 0.65 inch for large electrodes. For small electrodes, the spacing for minimum energy was not sharply defined. Small-diameter electrodes required less energy than large-diameter electrodes if the spacing was less than the optimum distance of 0.65 inch; at a spacing equal to the optimum distance, no difference was noted. Significant effects of electrode material on ignition energy were ascribed to differences in the type of spark discharges produced; glow discharges required higher energy than the arc-glow discharges. With pure glow discharges, the ignition energy was substantially constant for lead, cadmium, brass, aluminum, and tungsten electrodes. A method is described for determining the energy distribution along a glow discharge. It was found that one-third to one-half of the energy in the spark was concentrated in a small region near the cathode electrode, and the remainder was uniformly distributed across the spark gap. It was impossible to ascertain the dependence of ignition on. this distribution. It was also observed that long-duration (600 microsec) sparks required much less energy for ignition than did short-duration (1 microsec) sparks.

Swett, Clyde. C., Jr.↗

NASA NTRS1976

Information and display requirements for independent landing monitors

The ways an Independent Landing Monitor (ILM) may be used to complement the automatic landing function were studied. In particular, a systematic procedure was devised to establish the information and display requirements of an ILM during the landing phase of the flight. Functionally, the ILM system is designed to aid the crew in assessing whether the total system (e.g., avionics, aircraft, ground navigation aids, external disturbances) performance is acceptable, and, in case of anomaly, to provide adequate information to the crew to select the least unsafe of the available alternatives. Economically, this concept raises the possibility of reducing the primary autoland system redundancy and associated equipment and maintenance costs. The required level of safety for the overall system would in these cases be maintained by upgrading the backup manual system capability via the ILM. A safety budget analysis was used to establish the reliability requirements for the ILM. These requirements were used as constraints in devising the fault detection scheme. Covariance propagation methods were used with a linearized system model to establish the time required to correct manually perturbed states due to the fault. Time-to-detect and time-to-correct requirements were combined to devise appropriate altitudes and strategies for fault recovery.

Karmarker, J. S.↗

NASA NTRS1976

Space processing payload experiment requirements

An overview is given of the definition of research requirements and derivation of engineering design requirements for a group of 77 representative applications of space processing. Representative requirements are documented for applied research in space on biological processes, chemical/fluid phenomena, solidification processes, and glass/ceramics processes. Design requirements for payload equipment to accommodate these research requirements are presented in engineering terms, such as power requirements, schematic diagrams, etc. In addition, a summary of the 77 applied research topics is included.

Taylor, K. R.↗

NASA NTRS1980

Preliminary study of VTO thrust requirements for a V/STOL aircraft with lift plus lift/cruise propulsion

A preliminary assessment was made of the VTO thrust requirements for a supersonic (Type B) aircraft with a Lift plus Lift/Cruise propulsion system. A baseline aircraft with a takeoff gross weight (TOGW) of 13 608 kg (30,000 lb) was assumed. Pitch, roll, and yaw control thrusts (i.e., the thrusts needed for aircraft attitude control in the flight hover mode) were estimated based on a specified set of maneuver acceleration requirements for V/STOL aircraft. Other effects (such as installation losses, suckdown, reingestion, etc.), which add to the thrust requirements for VTO were also estimated. For the baseline aircraft, the excess thrust required for attitude control of the aircraft during VTO and flight hover was estimated to range from 36.9 to 50.9 percent of the TOGW. It was concluded that the total thrust requirements for the aircraft/propulsion system are large and significant. In order to achieve the performance expected of this aircraft/propulsion system, reductions must be made in the excess thrust requirements.

Turney, G. E.↗

NASA NTRS1980

Automated Orbit Determination System (AODS) requirements definition and analysis

The requirements definition for the prototype version of the automated orbit determination system (AODS) is presented including the AODS requirements at all levels, the functional model as determined through the structured analysis performed during requirements definition, and the results of the requirements analysis. Also specified are the implementation strategy for AODS and the AODS-required external support software system (ADEPT), input and output message formats, and procedures for modifying the requirements.

Waligora, S. R.↗

NASA NTRS1983

OSHA medical and workplace surveillance requirements and NIOSH recommendations (for employees exposed to toxic substances and other work hazards)

Both OSHA medical and work place surveillance requirements and NIOSH recommendations were prepared as a desk reference to help occupational health professionals to perform their duties. The medical surveillance information focuses on frequency of physical examinations, specific problems that may arise as a result of exposure (e.g., decreased immunocompetence, weight loss, ets.), conditions that intensify the harmful effects of exposure (e.g., medication an exposed employee may be taking, cigarette smoking, etc.), the areas that should be scrutinized in medical and work histories and during the physical exam, and specific clinical tests that should be conducted. Recordkeeping requirements are also specified. The workplace surveillance information consists of monitoring requirements, personal protective equipment requirements, and recordkeeping requirements. Such details as the sampling devices that should be used, the type of respirators that should be worn, and the frequency of inspections are included. This document does not specify the training, labeling and posting, and safe work practice requirements and recommendations due to space considerations.

Cooper, L. P.↗

NASA NTRS1985

Accommodation requirements for microgravity science and applications research on space station

Scientific research conducted in the microgravity environment of space represents a unique opportunity to explore and exploit the benefits of materials processing in the virtual abscence of gravity induced forces. NASA has initiated the preliminary design of a permanently manned space station that will support technological advances in process science and stimulate the development of new and improved materials having applications across the commercial spectrum. A study is performed to define from the researchers' perspective, the requirements for laboratory equipment to accommodate microgravity experiments on the space station. The accommodation requirements focus on the microgravity science disciplines including combustion science, electronic materials, metals and alloys, fluids and transport phenomena, glasses and ceramics, and polymer science. User requirements have been identified in eleven research classes, each of which contain an envelope of functional requirements for related experiments having similar characteristics, objectives, and equipment needs. Based on these functional requirements seventeen items of experiment apparatus and twenty items of core supporting equipment have been defined which represent currently identified equipment requirements for a pressurized laboratory module at the initial operating capability of the NASA space station.

Uhran, M. L.↗

NASA NTRS1984

Earth observing system (Eos) requirements for a polar platform

This paper describes the requirements that the polar platform will have to meet if it is to satisfy the needs of the scientific earth observation communities in the early 1990s. The Eos is a prime mission for the polar platform. The polar platform will be a large satellite in a sun synchronous orbit that could be built up from the same components that are to be used to build the Space Station and its co-orbiting freeflying satellite. It will be serviced from the Shuttle so that it will be kept in operation and up-to-date for at least a decade. An initial set of scientific requirements has been documented by a Science and Missions Requirements Working Group (S&MRWG). These scientific requirements have been translated into derived technical requirements for the polar platform. These derived requirements are presented.

Muller, R. M.↗

NASA NTRS1985

System analysis study of space platform and station accommodations for life sciences research facilities. Volume 2: Study results. Appendix D: Life sciences research facility requirements

The purpose of this requirements document is to develop the foundation for concept development for the Life Sciences Research Facility (LSRF) on the Space Station. These requirements are developed from the perspective of a Space Station laboratory module outfitter. Science and mission requirements including those related to specimens are set forth. System requirements, including those for support, are detailed. Functional and design requirements are covered in the areas of structures, mechanisms, electrical power, thermal systems, data management system, life support, and habitability. Finally, interface requirements for the Command Module and Logistics Module are described.

Wiley, Lowell F.↗

NASA NTRS1989

Parallel Architectures for Planetary Exploration Requirements (PAPER)

The Parallel Architectures for Planetary Exploration Requirements (PAPER) project is essentially research oriented towards technology insertion issues for NASA's unmanned planetary probes. It was initiated to complement and augment the long-term efforts for space exploration with particular reference to NASA/LaRC's (NASA Langley Research Center) research needs for planetary exploration missions of the mid and late 1990s. The requirements for space missions as given in the somewhat dated Advanced Information Processing Systems (AIPS) requirements document are contrasted with the new requirements from JPL/Caltech involving sensor data capture and scene analysis. It is shown that more stringent requirements have arisen as a result of technological advancements. Two possible architectures, the AIPS Proof of Concept (POC) configuration and the MAX Fault-tolerant dataflow multiprocessor, were evaluated. The main observation was that the AIPS design is biased towards fault tolerance and may not be an ideal architecture for planetary and deep space probes due to high cost and complexity. The MAX concepts appears to be a promising candidate, except that more detailed information is required. The feasibility for adding neural computation capability to this architecture needs to be studied. Key impact issues for architectural design of computing systems meant for planetary missions were also identified.

Cezzar, Ruknet↗

NASA NTRS1988

A practical approach to object based requirements analysis

Presented here is an approach developed at the Unisys Houston Operation Division, which supports the early identification of objects. This domain oriented analysis and development concept is based on entity relationship modeling and object data flow diagrams. These modeling techniques, based on the GOOD methodology developed at the Goddard Space Flight Center, support the translation of requirements into objects which represent the real-world problem domain. The goal is to establish a solid foundation of understanding before design begins, thereby giving greater assurance that the system will do what is desired by the customer. The transition from requirements to object oriented design is also promoted by having requirements described in terms of objects. Presented is a five step process by which objects are identified from the requirements to create a problem definition model. This process involves establishing a base line requirements list from which an object data flow diagram can be created. Entity-relationship modeling is used to facilitate the identification of objects from the requirements. An example is given of how semantic modeling may be used to improve the entity-relationship model and a brief discussion on how this approach might be used in a large scale development effort.

Drew, Daniel W.↗

NASA NTRS1990

Results of the users' requirements survey

The objectives of the High Resolution, High Frame Rate Video Technology (HHVT) Users' Requirements Survey were the following: (1) Document the requirements of potential users of the HHVT system; (2) Establish a data base relating key video parameters to HHVT users; (3) Guide the development of a high resolution, high frame rate video system offering high data storage capacity and high data transmission rates; (4) Allow users to compare their requirements to those of other users and to the state-of-the-art technology; and (5) Allow users to reassess, if necessary, their requirements in the light of existing and near-term technology. The results of the Users' Requirements Survey are presented. The diversity of these requirements indicates a need for developing a video system with great flexibility.

Butcher, Robert L.↗

NASA NTRS1990

STV engine requirements

The Space Exploration Initiative program and the Space Transfer Vehicle studies provide the opportunity to evaluate the engine requirements for the next generation space engine within the context of a credible but technologically demanding program. Some of these requirements are generic, basically independent of the architecture, and others are mission and configuration dependent. Generic requirements include high reliability, space-basing, man-rataing, long life and reusability, and extended health monitoring, including automatic pre-mission checkout. Mission and configuration dependent requirements include vehicle/engine interfaces, engine throttling, performance specifications, engine system architecture, and operational requirements. It is argued that engine technology requirements must be extended from the usual performance-related issues to encompass reliability, space-basing, life, and extended health monitoring.

Redus, J. R.↗

NASA NTRS1991

Cryogenic propellant management system requirements for Space Station Freedom

Specific propellant management system requirements have been identified for each facility category of SSF. Distributed systems have been analyzed to indentify momentum management, guidance, and traffic management requirements associated with the guidance, navigation, and control system; space-to-space communications and enhanced tracking requirements associated with the communications and tracking system; and propellant management system utility requirements associated with the electrical power system. Flight element analyses determined attach structure, utility distribution, and structural integrity requirements for the pre-integrated truss and high mass manipulation and translation requirements for the mobile base system.

Saucillo, R. J.↗

NASA NTRS1991

Technical Requirements Analysis and Control Systems (TRACS) Initial Operating Capability (IOC) documentation

The Technical Requirements Analysis and Control Systems (TRACS) software package is described. TRACS offers supplemental tools for the analysis, control, and interchange of project requirements. This package provides the fundamental capability to analyze and control requirements, serves a focal point for project requirements, and integrates a system that supports efficient and consistent operations. TRACS uses relational data base technology (ORACLE) in a stand alone or in a distributed environment that can be used to coordinate the activities required to support a project through its entire life cycle. TRACS uses a set of keyword and mouse driven screens (HyperCard) which imposes adherence through a controlled user interface. The user interface provides an interactive capability to interrogate the data base and to display or print project requirement information. TRACS has a limited report capability, but can be extended with PostScript conventions.

Hammond, Dana P.↗

NASA NTRS1991

Evolution user requirements for the restructured space station

Space Station Freedom (SSF) is designed to be an Earth orbiting multidisciplinary R&D facility capable of evolving to accommodate a variety of potential uses. In order to identify SSF evolution requirement and define potential growth configurations, NASA-Langley is analyzing user resource requirements for the post-PMC time frame. The analysis goal is to define resource levels, including crew, power, and volume, which allow full utilization of SSF capabilities commensurate with minimum essential user requirements. Multiple scenarios were studied including core R&D and combined SEI plus R&D utilization. An analysis is presented of a core R&D utilization scenario. Included are discussions of resource allocation assumptions for specific R&D disciplines, user requirements trends, and growth resource projections. These preliminary results show total resource requirements of 13 crew, 150 kW power, and additional lab volume equivalent to a second U.S. lab module. Additionally, orthogonal growth structure was identified as required to support SSF systems and users.

Leath, K.↗

NASA NTRS1992

NASA TSRV essential flight control system requirements via object oriented analysis

The objective was to analyze the baseline flight control system of the Transport Systems Research Vehicle (TSRV) and to develop a system specification that offers high visibility of the essential system requirements in order to facilitate the future development of alternate, more advanced software architectures. The flight control system is defined to be the baseline software for the TSRV research flight deck, including all navigation, guidance, and control functions, and primary pilot displays. The Object Oriented Analysis (OOA) methodology developed is used to develop a system requirement definition. The scope of the requirements definition contained herein is limited to a portion of the Flight Management/Flight Control computer functionality. The development of a partial system requirements definition is documented, and includes a discussion of the tasks required to increase the scope of the requirements definition and recommendations for follow-on research.

Duffy, Keith S.↗

NASA NTRS1992

Functional requirements document for the Earth Observing System Data and Information System (EOSDIS) Scientific Computing Facilities (SCF) of the NASA/MSFC Earth Science and Applications Division, 1992

Five scientists at MSFC/ESAD have EOS SCF investigator status. Each SCF has unique tasks which require the establishment of a computing facility dedicated to accomplishing those tasks. A SCF Working Group was established at ESAD with the charter of defining the computing requirements of the individual SCFs and recommending options for meeting these requirements. The primary goal of the working group was to determine which computing needs can be satisfied using either shared resources or separate but compatible resources, and which needs require unique individual resources. The requirements investigated included CPU-intensive vector and scalar processing, visualization, data storage, connectivity, and I/O peripherals. A review of computer industry directions and a market survey of computing hardware provided information regarding important industry standards and candidate computing platforms. It was determined that the total SCF computing requirements might be most effectively met using a hierarchy consisting of shared and individual resources. This hierarchy is composed of five major system types: (1) a supercomputer class vector processor; (2) a high-end scalar multiprocessor workstation; (3) a file server; (4) a few medium- to high-end visualization workstations; and (5) several low- to medium-range personal graphics workstations. Specific recommendations for meeting the needs of each of these types are presented.

Botts, Michael E.↗