Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reduce order modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Verification of a Reduced-Order Extension Spring Model

Adopting reduced order models (ROMs) of springs lowers the computational cost of stronglink simulations. However, ROMs introduce currently unquantified error to such analyses. This study addresses that lack of data by comparing a hexahedral mesh to a commonly used ROM beam mesh. Two types of analyses were performed, a quasi-static displacement-controlled pull and a haversine shock, examining basic spring properties as well as dynamics and stress/strain data. Both tests showed good similarities between the hexahedral and beam meshes, especially when comparing reaction force and stress trends and maximums. Equivalent plastic strain results were not quite as favorable, indicating that the beam model may be less likely to correctly predict spring failure. Despite reducing computation times by over 48 hours in all shock cases, appropriate use of the ROM should carefully balance this advantage with its reduction in accuracy, especially when examining spring failure and outputting variables such as equivalent plastic strain.

42 ENGINEERING↗
DOE OSTI2020

High-Fidelity Large-Signal Order Reduction Approach for Composite Load Model

With the increasing penetration of electronic loads and distributed energy resources, conventional load models cannot capture their dynamics. Therefore, a new comprehensive composite load model is developed by Western Electricity Coordinating Council (WECC). However, this model is a complex high-order non-linear system with multi-time-scale property, which poses challenges on power system studies with heavy computational burden. In order to reduce the model complexity, the authors firstly develop a large-signal order reduction (LSOR) method using singular perturbation theory. In this method, the fast dynamics are integrated into the slow ones to preserve transient characteristics of the former. Then, accuracy assessment conditions are proposed and embedded into the LSOR to improve and guarantee the accuracy of reduced-order model. Finally, the reduced-order WECC composite load model is derived by using the proposed algorithm. Overall, simulation results show that the reduced-order large-signal model significantly alleviates the computational burden while maintaining similar dynamic responses as the original composite load model.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Towards real-time forecasting of natural gas production by harnessing graph theory for stochastic discrete fracture networks

In this work, we compare hydrocarbon production curves obtained from a graph-based reduced-order model with the high-fidelity Discrete Fracture Network (DFN) predictions for a fracture network created using data from a real shale site. We observe that the bounds for the high fidelity DFN model lie within the bounds for the reduced order model, implying that the reduced-order model provides a conservative estimate. Moreover, we found that except for first-passage times and late arriving mass, the production curves from the reduced-order model predict transport accurately. However, it is to be noted that the results are inspite of trading a three-dimensional geometry for a reduced system in the form of a graph, one that is 500–1000 times faster in terms of computational efficiency (for this particular application). In addition, we also compare the production curves for large drawdown and small drawdown using our graph approach. The reduced-order model is successful in showing that the long term productivity is higher in case of small drawdown although the initial productivity is higher for large drawdown. Thus, this reduced-order model offers great potential in uncertainty quantification for production, as well as in providing operators with information to make real-time decisions for optimal production.

03 NATURAL GAS↗
DOE OSTI2023

A multifidelity deep operator network approach to closure for multiscale systems

Projection-based reduced order models (PROMs) have shown promise in representing the behavior of multiscale systems using a small set of generalized (or latent) variables. Despite their success, PROMs can be susceptible to inaccuracies, even instabilities, due to the improper accounting of the interaction between the resolved and unresolved scales of the multiscale system (known as the closure problem). In the current work, we interpret closure as a multifidelity problem and use a multifidelity deep operator network (DeepONet) framework to address it. In addition, to enhance the stability and/or accuracy of the multifidelity-based closure, we employ the recently developed ``in-the-loop" training approach from the literature on coupling physics and machine learning models. The resulting approach is tested on shock advection for the one-dimensional viscous Burgers equation and vortex merging for the two-dimensional Navier-Stokes equations. Furthermore, the numerical experiments show significant improvement of the predictive ability of the closure-corrected PROM over the un-corrected one both in the interpolative and the extrapolative regimes.

42 ENGINEERING↗
DOE OSTI2020

Forward sensitivity approach for estimating eddy viscosity closures in nonlinear model reduction

In this paper, we propose a variational approach to estimate eddy viscosity using forward sensitivity method (FSM) for closure modeling in nonlinear reduced order models. FSM is a data assimilation technique that blends model's predictions with noisy observations to correct initial state and/or model parameters. We apply this approach on a projection based reduced order model (ROM) of the one-dimensional viscous Burgers equation with a square wave defining a moving shock, and the two-dimensional vorticity transport equation formulating a decay of Kraichnan turbulence. We investigate the capability of the approach to approximate an optimal value for eddy viscosity with different measurement configurations. Specifically, we show that our approach can sufficiently assimilate information either through full field or sparse noisy measurements to estimate eddy viscosity closure to cure standard Galerkin reduced order model (GROM) predictions. Therefore, our approach provides a modular framework to correct forecasting error from a sparse observational network on a latent space. We highlight that the proposed GROM-FSM framework is promising for emerging digital twin applications, where real-time sensor measurements can be used to update and optimize surrogate model's parameters.

42 ENGINEERING↗
DOE OSTI2022

Parametric model-order-reduction development for unsteady convection

A time-averaged error indicator with POD- h Greedy is developed to drive parametric model order reduction (pMOR) for 2D unsteady natural convection in a high-aspect ratio slot parameterized with the Prandtl number, Rayleigh number, and slot angle with respect to the gravity. The error indicator is extended to accommodate the energy equation and Leray regularization. Despite being two-dimensional and laminar, the target flow regime presents several challenges: 1) there is a bifurcation in the angle parameter space; 2) the solution can be multivalued, even at steady state; and 3) the solution exhibits spatio-temporal chaos at several points in the parameter space. The authors explore several reduced-order models (ROMs) and demonstrate that Leray-regularized Galerkin ROMs provide a robust solution approach for this class of flows. They further demonstrate that error-indicated pMOR can efficiently predict several QOIs, such as mean flow, mean Nusselt number and mean turbulent kinetic energy, even in the presence of a bifurcation. Finally, they show that spatio-temporal chaos can lead to lack of reproducibility in both the full-order model and the reduced-order model and that the variance in the full-order model provides a lower bound on the pMOR error in these cases.

leray regularization↗
DOE OSTI2026

Reduced-order CFD modeling of cryogenic hydrogen isotope extrusion for pellet fueling

This study presents a reduced-order model (ROM) for computational fluid dynamics (CFD) simulations of cryogenic hydrogen isotope extrusions, focusing on protium (H₂) and deuterium (D₂) piston extruders. Using a 2D axisymmetric ROM in ANSYS-Polyflow, significant computational savings were achieved (runtime reduced from 9∼24 h to 3∼5 min), with extrusion force discrepancies between the 2D ROM and 3D models being on the order of 1%. Parametric studies identified optimal cutoff shear rates in the viscosity model (0.01/s for H₂ and 0.001/s for D₂), providing recommendations for future simulations. Finally, a comprehensive comparison of ROM results with experimental data was performed across varying geometries, cryogenic materials, temperatures, extrusion lengths, and piston velocities. Predictions at low extrusion temperatures met the objective of providing quick and efficient solutions with an acceptable extrusion force error of approximately 10% or less, validating the effectiveness of the 2D ROM approach. However, at high temperatures closer to the triple point, extrusion force error grows, which necessitates developing an improved model that accounts for temperature effects, e.g. melting. Nevertheless, the findings still represent a significant improvement in efficiency of CFD modeling of cryogenic hydrogenic extrusion. The ROM framework can also be extended to tritium (T2) and screw extruders, which will ultimately provide a fast and effective tool for optimizing pellet injector design for ITER and future reactor systems.

Fan, Joy [ORNL] (ORCID:0000000229751735)↗
DOE OSTI2026

A PSCAD Library Component Featuring a Reduced-Order IBR Model for EMT-Based Fault Studies

This paper presents a fully implemented inverter reduce-order-model (ROM) in an EMT simulation (PSCAD) library component for direct user utilization in protection studies. The developed inverter ROM has the following features: Equivalent to a full IBR inverter model with positive- and negative-sequence current formulation and representation A python script is developed to fully automate this process, including training data generation, ROM parameter training, updating parameters, and model verification and validation. With this PSCAD ROM library component, protection engineers can utilize a trustworthy, accurate ROM for protection studies in an easy-to-use and streamlined manner.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Multiscale modeling high-order methods and data-driven modeling

Projection-based reduced-order models (ROMs) comprise a promising set of data-driven approaches for accelerating the simulation of high-fidelity numerical simulations. Standard projection-based ROM approaches, however, suffer from several drawbacks when applied to the complex nonlinear dynamical systems commonly encountered in science and engineering. These limitations include a lack of stability, accuracy, and sharp a posteriori error estimators. This work addresses these limitations by leveraging multiscale modeling, least-squares principles, and machine learning to develop novel reduced-order modeling approaches, along with data-driven a posteriori error estimators, for dynamical systems. Theoretical and numerical results demonstrate that the two ROM approaches developed in this work - namely the windowed least-squares method and the Adjoint Petrov - Galerkin method - yield substantial improvements over state-of-the-art approaches. Additionally, numerical results demonstrate the capability of the a posteriori error models developed in this work.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Machine learning for nonintrusive model order reduction of the parametric inviscid transonic flow past an airfoil

Fluid flow in the transonic regime finds relevance in aerospace engineering, particularly in the design of commercial air transportation vehicles. Computational fluid dynamics models of transonic flow for aerospace applications are computationally expensive to solve because of the high degrees of freedom as well as the coupled nature of the conservation laws. While these issues pose a bottleneck for the use of such models in aerospace design, computational costs can be significantly minimized by constructing special, structure-preserving surrogate models called reduced-order models. In this work, we propose a machine learning method to construct reduced-order models via deep neural networks and we demonstrate its ability to preserve accuracy with a significantly lower computational cost. In addition, our machine learning methodology is physics-informed and constrained through the utilization of an interpretable encoding by way of proper orthogonal decomposition. Application to the inviscid transonic flow past the RAE2822 airfoil under varying freestream Mach numbers and angles of attack, as well as airfoil shape parameters with a deforming mesh, shows that the proposed approach adapts to high-dimensional parameter variation well. Notably, the proposed framework precludes the knowledge of numerical operators utilized in the data generation phase, thereby demonstrating its potential utility in the fast exploration of design space for diverse engineering applications. Comparison against a projection-based nonintrusive model order reduction method demonstrates that the proposed approach produces comparable accuracy and yet is orders of magnitude computationally cheap to evaluate, despite being agnostic to the physics of the problem.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

SNS: A Solution-Based Nonlinear Subspace Method for Time-Dependent Model Order Reduction

Several reduced order models have been successfully developed for nonlinear dynamical systems. To achieve a considerable speed-up, a hyper-reduction step is needed to reduce the computational complexity due to nonlinear terms. Many hyper-reduction techniques require the construction of nonlinear term basis, which introduces a computationally expensive offline phase. A novel way of constructing nonlinear term basis within the hyper-reduction process is introduced. In contrast to the traditional hyper-reduction techniques where the collection of nonlinear term snapshots is required, the SNS method avoids collecting the nonlinear term snapshots. Instead, it uses the solution snapshots that are used for building a solution basis, which enables avoiding an extra data compression of nonlinear term snapshots. As a result, the SNS method provides a more efficient offline strategy than the traditional model order reduction techniques, such as the DEIM, GNAT, and ST-GNAT methods. The SNS method is theoretically justified by the conforming subspace condition and the subspace inclusion relation. It is useful for model order reduction of large-scale nonlinear dynamical problems to reduce the offline cost. It is especially useful for ST-GNAT that has shown promising results, such as a good accuracy with a considerable online speed-up for hyperbolic problems in a recent paper by Choi and Carlberg [SIAM J. Sci. Comput., 41 (2019), pp. A26--A58], because ST-GNAT involves an expensive offline cost related to collecting nonlinear term snapshots. Error analysis for the SNS method is presented. Numerical results support that the accuracy of the solution from the SNS method is comparable to the traditional methods and a considerable speed-up (i.e., a factor of two to a hundred) is achieved in the offline phase.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Degradation and Modeling of Large-Format Commercial Lithium-Ion Cells as a Function of Chemistry, Design, and Aging Conditions

Demand for large-format (>10 Ah) lithium-ion batteries has increased substantially in recent years, due to the growth of both electric vehicle and stationary energy storage markets. The economics of these applications is sensitive to the lifetime of the batteries, and end-of-life can either be due to energy or power limitations. Despite this, there is little information from cell manufacturers on the sensitivity of cell degradation to environmental conditions or battery use. This work reports accelerated aging test data from four commercial large-format lithium-ion batteries from three manufacturers, with varying design (thickness, casings, ...), chemistry (lithium-iron-phosphate (LFP) or lithium-nickel-manganese-cobalt-oxide positive electrodes (NMC), with graphite (Gr) negative electrodes), and capacity (50 to 250 Amp hours). The tested LFP|Gr cell is found to be relatively insensitive to cycling conditions like temperature or voltage window, while NMC|Gr cells have varying sensitivity. Degradation trends are further investigated by training predictive models: simple polynomial trend lines, a semi-empirical reduced-order model, and an empirical reduced-order model identified using machine-learning based on symbolic regression. Calendar and cycle life are simulated over a variety of conditions to directly compare the various batteries. Cell size and thickness are found to substantially impact sensitivity to temperature during cycle aging, while electrode chemistry impacts depth-of-discharge sensitivity. Real-world battery lifetime is evaluated by simulating residential energy storage and commercial frequency containment reserve systems in several U.S. climate regions. Predicted lifetime across cell types varies from 7 years to 20+ years, though all cells are predicted to have at least 10 year life in certain conditions.

battery lifetime↗