Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Radiation defect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Formation of donors in germanium–silicon alloys implanted with hydrogen ions with different energies

The distributions of hydrogen-containing donors in Ge{sub 1–x}Si{sub x} (0 ≤ x ≤ 0.06) alloys implanted with hydrogen ions with an energy of 200 and 300 keV and a dose of 1 × 10{sup 15} cm{sup –2} are studied. It is established that, at the higher ion energy, the limiting donor concentration after postimplantation heat treatment (275°C) is attained within ~30 min and, at the lower energy, within ~320 min. In contrast to donors formed near the surface, a portion of hydrogen-containing donors formed upon the implantation of ions with the higher energy possess the property of bistability. The limiting donor concentration is independent of the ion energy, but decreases from 1.3 × 10{sup 16} to 1.5 × 10{sup 15} cm{sup –3}, as the Si impurity content in the alloy is increased from x = 0.008 to x = 0.062. It is inferred that the observed differences arise from the participation of the surface in the donor formation process, since the surface significantly influences defect-formation processes involving radiation-induced defects, whose generation accompanies implantation.

36 MATERIALS SCIENCE↗

Annealing of irradiated n+p InP buried homojunctions

At the last SPRAT conference, the Naval Research Laboratory (NRL) presented results from two experiments. One studied n+p diffused junction (DJ) InP solar cells, and the other studied n+p shallow homojunction (SHJ) InP mesa diodes grown by metalorganic chemical vapor deposition (MOCVD). The former work showed that a DJ solar cell in which the maximum power P(sub max) had been degraded by nearly 80 percent under irradiation recovered completely under short circuit illumination at 450K. The recovery was accompanied by the removal of all but one of the radiation-induced defect levels. The latter work, on the other hand, showed that the radiation-induced defects in the SHJ diodes did not anneal until the temperature reached 650K. These results suggest that an irradiated DJ solar cell, under illumination, will anneal at a temperature 200K lower than an irradiated SHJ cell. This is an unexpected result considering the similarity of the devices. The goal of the present research is to explain this different behavior. This paper investigates two points which arose from the previous studies. The first point is that the DJ cells were annealed under illumination while the SHJ diodes were annealed without bias. The second point investigated here is that the emitters of the DJ and SHJ devices were significantly different.

Walters, Robert J.↗

Atoms-to-devices models for post-irradiation annealing kinetics in III-V semiconductors

Understanding atomic displacement damage and propagating this understanding into validated defect-aware radiation damage models is a critical step toward achieving predictive, atoms-to-systems assessment of radiation vulnerabilities of microelectronics. These models are essential for evaluating the performance and reliability of nuclear stockpile components or space-based electronics (satellites). The goal of this project was to bridge a fundamental science gap between defect spectroscopies and atomistic modeling of radiation-induced defects on the one hand, and simulations of device response on the other hand, to develop predictive defect-aware damage models for high-fidelity device simulations of radiation-damaged III-V semiconductors.

36 MATERIALS SCIENCE↗

A study of radiation damage effects on the magnetic structure of bulk Iron

Defects, defect interactions, and defect dynamics in solids created by fast neutrons are known to have significant impact on the performance and lifetime of structural materials. A fundamental understanding of the radiation damage effects in solids is therefore of great importance in assisting the development of improved materials - materials with ultrahigh strength, toughness, and radiation resistance. In this presentation, we show our recent theoretical investigation on the magnetic structure evolution of bulk iron in the region of the radiation defects. We applied a linear scaling ab-initio method based on density functional theory with local spin density approximation, namely the locally self-consistent multiple scattering method (LSMS), to the study of magnetic moment distributions in a cascade at the damage peak and for a series of time steps as the interstitials and vacancies recombined. Atomic positions correspond to those in a low energy cascade in a 10|000 atom sample, in which the primary damage state and the evolution of all defects produced were simulated using molecular dynamics with empirical, embedded-atom inter-atomic potentials. We will discuss how a region of affected moments expands and then recedes in response to a cascade evolution.

36 MATERIALS SCIENCE↗

Effects of Channel Implant Variation on Radiation-Induced Edge Leakage Currents in n-Channel MOSFETs

The effects of radiation-induced defects and statistical variation in the dose and energy of MOSFET channel implants in a modern bulk CMOS technology are modeled using a process simulator in combination with analytical computations. The model integrates doping profiles obtained from process simulations and experimentally determined defect potentials into implicit surface potential equations. Solutions to these equations are then used to model radiation-induced edge leakage currents in 90-nm bulk CMOS n-channel MOSFETs. The results indicate that slight variations in the channel implant parameters can have a significant impact on the doping profile along the shallow trench isolation sidewall and thus the radiation-induced edge leakage currents.

42 ENGINEERING↗

Defect Luminescence from Wurtzite CuInS 2 Nanocrystals: Combined Experimental and Theoretical Analysis

CuInS 2 nanocrystals with the wurtzite structure show promise for applications requiring efficient energy transport due to their anisotropic crystal structure. We investigate the source of photoluminescence in the near-infrared spectral region recently observed from these nanocrystals. Spectroscopic studies of both wurtzite CuInS 2 itself and samples alloyed with Cd or Zn allow the assignment of this emission to a radiative point defect within the nanocrystal structure. Further, by varying the organic passivation layer on the material, we are able to determine that the atomic species responsible for nonradiative decay paths on the nanocrystal surface are Cu- or S-based. Density functional theory calculations of defect states within the material allow identification of the likely radiative species. In conclusion, understanding both the electronic structure and optical properties of wurtzite CuInS 2 nanocrystals is necessary for their efficient integration into potential biological, photovoltaic, and photocatalytic applications.

Chemical structure↗

A comparative characterization of defect structure in NiCo and NiFe equimolar solid solution alloys under in situ electron irradiation

Dislocation loops in NiCo and NiFe, both being single-phase, equimolar solid solution alloys, are generated by in situ high-voltage electron irradiation and characterized inside a transmission electron microscope. In addition to the different defect growth rates, the two alloys present dislocation loops with distinct shape evolution and element segregation, which reflect the element-sensitive, intrinsic properties (e.g., defect energetics, lattice distortion, and local ordering) of the alloys. These results provide evidence that the structure and dynamics of radiation-induced defects in concentrated alloys depend on not only the number but also the species of alloying elements.

36 MATERIALS SCIENCE↗

Irradiation-induced grain growth and defect evolution in nanocrystalline zirconia with doped grain boundaries

Grain boundaries are effective sinks for radiation-induced defects, ultimately impacting the radiation tolerance of nanocrystalline materials (dense materials with nanosized grains) against net defect accumulation. However, irradiation-induced grain growth leads to grain boundary area decrease, shortening potential benefits of nanostructures. A possible approach to mitigate this is the introduction of dopants to target a decrease in grain boundary mobility or a reduction in grain boundary energy to eliminate driving forces for grain growth (using similar strategies as to control thermal growth). Here, in this study, we tested this concept in nanocrystalline zirconia doped with lanthanum. Although the dopant is observed to segregate to the grain boundaries, causing grain boundary energy decrease and promoting dragging forces for thermally activated boundary movement, irradiation induced grain growth could not be avoided under heavy ion irradiation, suggesting a different growth mechanism as compared to thermal growth. Furthermore, it is apparent that reducing the grain boundary energy reduced the effectiveness of the grain boundary as sinks, and the number of defects in the doped material is higher than in undoped (La-free) YSZ.

36 MATERIALS SCIENCE↗

Mechanics of point defect diffusion near dislocations and grain boundaries: A chemomechanical framework

Diffusion of point defects during irradiation is simulated via a two-way coupling between mechanical stress and defect diffusion in iron. This diffusion is based on a modified chemical potential that includes not only the local concentration of radiation-induced defects, but also the influence of the residual stress field from both the microstructure (i.e. dislocations or grain boundaries) and the eigenstrain caused by the defects themselves. Defect flux and concentration rates are derived from this chemical potential using Fick’s first and second laws. Mean field rate theory is incorporated to model the annihilation of Frenkel pairs, and increased annihilation near grain boundaries is included based on the elastic energy of each grain boundary. Mechanical equilibrium is coupled with diffusion by computing eigenstrain from point defects and adding this to the total strain. Intrinsic stresses associated with the dislocations and grain boundaries are calculated using dislocation and disclination mechanics. Through this two-way-coupled model, regions of low concentration are seen near grain boundaries, and sink efficiency is calculated for different types of microstructure. Furthermore, the results show that the two-way mechanical coupling has a strong influence on sink efficiency for dislocation loops. The results also suggest that misorientation is a poor metric for determining sink efficiency, with sink density and elastic energy being much more informative.

36 MATERIALS SCIENCE↗

Defect characterization of proton irradiated GaAs pn-junction diodes with layers of InAs quantum dots

In order to expand the technology of III-V semiconductor devices with quantum structures to both terrestrial and space use, radiation induced defects as well as native defects generated in the quantum structures should be clarified. Electrically active defects in GaAs p{sup +}n diodes with embedded ten layers of InAs quantum dots (QDs) are investigated using Deep Level Transient Fourier Spectroscopy. Both majority carrier (electron) and minority carrier (hole) traps are characterized. In the devices of this study, GaP layers are embedded in between the QD layers to offset the compressive stress introduced during growth of InAs QDs. Devices are irradiated with high energy protons for three different fluences at room temperature in order to characterize radiation induced defects. Seven majority electron traps and one minority hole trap are found after proton irradiation. It is shown that four electron traps induced by proton irradiation increase in proportion to the fluence, whereas the EL2 trap, which appears before irradiation, is not affected by irradiation. These defects correspond to electron traps previously identified in GaAs. In addition, a 0.53 eV electron trap and a 0.14 eV hole trap are found in the QD layers before proton irradiation. It is shown that these native traps are also unaffected by irradiation. The nature of the 0.14 eV hole trap is thought to be Ga-vacancies in the GaP strain balancing layers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radiation tolerance of Cu/W multilayered nanocomposites

Magnetron sputtered Cu/W multilayer samples with individual layer thicknesses from 2.5 to 50 nm were irradiated by 50 keV He+ ions at ion fluences from 7e20 to 6e21 m-2 at room temperature. Evolution of the interfacial structure during irradiation is monitored by X-ray diffraction and cross-sectional transmission electron microscopy. Moreover, radiation responses on the individual layer thickness and He+ ion irradiation fluence are revealed. The highly morphological stability of the multilayered structure suggests that the interfacial structure and grain boundary can serve as sinks for radiation-induced defects.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

In situ study of heavy ion irradiation response of immiscible Cu/Fe multilayers

By providing active defect sinks that capture and annihilate radiation induced defect clusters immiscible metallic multilayers with incoherent interfaces can effectively reduce defect density in ion irradiated metals. Although it is anticipated that defect density within the layers should vary as a function of distance to the layer interface, there is, to date, little in situ TEM evidence to validate this hypothesis. In our study monolithic Cu films and Cu/Fe multilayers with individual layer thickness, h, of 100 and 5 nm were subjected to in situ Cu ion irradiation at room temperature to nominally 1 displacement-per-atom inside a transmission electron microscope. Rapid formation and propagation of defect clusters were observed in monolithic Cu, whereas fewer defects with smaller dimensions were generated in Cu/Fe multilayers with smaller h. Moreover, in situ video shows that the cumulative defect density in Cu/Fe 100 nm multilayers indeed varies, as a function of distance to the layer interfaces, supporting a long postulated hypothesis.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Linker Contribution toward Stability of Metal–Organic Frameworks under Ionizing Radiation

Here, the effects of radiation on a series of UiO derivative metal–organic frameworks (MOFs) that contain the same zirconium hexamer node and similar organic linkers, UiO-66, UiO-66–NH 2 , UiO-66–OH, and NU-403, were examined using γ-rays and 5 MeV He ions. UiO-66, UiO-66–NH2, and UiO-66–OH contain aromatic linkers and are significantly more stable to radiation than NU-403. Of these, UiO-66 is the most radiation resistant, displaying crystalline features up to 47 MGy of He-ion irradiation. MOFs containing aromatic linkers functionalized by electron-donating groups, UiO-66–NH 2 and UiO-66–OH, retained crystalline features up to 19 MGy. NU-403 contains aliphatic rings and is the least radiation-resistant MOF studied here. NU-403 exhibits small changes in infrared spectra upon 3 MGy of γ-irradiation and significant damage upon 10 MGy of He-ion irradiation. Diffraction data revealed radiation-induced defect formation. Structural locations of radiation-induced breakdown were interrogated experimentally and via density functional theory. The results indicated changes in the carboxylate (-OCO) of the linker and μ 3 -OH vibrational modes, suggesting that introduction of an aliphatic linker into the MOF renders the connection between the linker and metal node most susceptible to radiation damage. This study reveals that the choice of the linker is crucial in designing a radiation-resistant MOF.

36 MATERIALS SCIENCE↗

Reverse annealing in radiation-damaged, silicon solar cells

In order to understand the results in terms of properties of the radiation induced defects, a combination of diffusion length measurements and defect data obtained from Deep Level Transient Spectroscopy were used. The results indicate that the defect at E sub v + 0.30 eV is responsible for the observed reversed annealing. The defect was identified as a boron-oxygen vacancy complex. This identification is a guide to processing efforts aimed at increasing the concentration of these radiation induced defects.

Weinberg, I.↗

Theoretical and experimental studies of the current–voltage and capacitance–voltage of HEMT structures and field-effect transistors

The sensitivity of classical n{sup +}/n{sup –} GaAs and AlGaN/GaN structures with a 2D electron gas (HEMT) and field-effect transistors based on these structures to γ-neutron exposure is studied. The levels of their radiation hardness were determined. A method for experimental study of the structures on the basis of a differential analysis of their current–voltage characteristics is developed. This method makes it possible to determine the structure of the layers in which radiation-induced defects accumulate. A procedure taking into account changes in the plate area of the experimentally measured barrier-contact capacitance associated with the emergence of clusters of radiation-induced defects that form dielectric inclusions in the 2D-electron-gas layer is presented for the first time.

36 MATERIALS SCIENCE↗

Preferential void formation at crystallographically ordered grain boundaries in nanotwinned copper thin films

We report nanocrystalline materials are expected to have improved radiation resistance as the high density of grain boundary area is thought to act as an effective sink for radiation-induced defects. However, continued absorption of defects can alter the structure of grain boundaries and/or enhance their mobility, eventually leading to microstructural degradation in the form of grain coarsening, thus negating their initial radiation tolerance. Hence, an ideal microstructure might be one with a mix of boundaries that are effective sinks and limit grain coarsening. We show through in situ electron irradiation experiments, however, that this is an insufficient condition. Our observations indicate that even a high density of low energy coherent twin boundaries, supposedly stabilizing the microstructure against grain coarsening, can be a detriment in that it biases the mobility of vacancies accumulating during irradiation thereby resulting in preferential void nucleation near twin boundaries. These observations highlight the fact that radiation induced grain boundary migration depends greatly on the topology of the grain boundary network and that the migration of high-angle grain boundaries can be hindered when coordinated at triple junctions composed of at least two low-energy boundaries, e.g., coincidence site lattice boundaries.

36 MATERIALS SCIENCE↗

Defect evolution in Ni and NiCoCr by in situ 2.8 MeV Au irradiation

The evolution of radiation-induced defects in Ni and the single-phase concentrated solid solution alloy, NiCoCr, were investigated during in situ 2.8 MeV Au ion irradiation and post-irradiation analysis using transmission electron microscopy. Compared to Ni, both the size and area density of defect clusters decreased in NiCoCr under the same irradiation conditions, suggesting that the chemical complexity, i.e., randomness of lattice site occupations, of NiCoCr suppressed radiation-induced damage. One-dimensional glide of defect clusters was observed in Ni but not in the NiCoCr alloy. The structural nature of small defect clusters in NiCoCr were further investigated using high-angle annular dark field scanning transmission electron microscopy.

36 MATERIALS SCIENCE↗

The multiple roles of small-angle tilt grain boundaries in annihilating radiation damage in SiC

Lattice defects generated by radiation damage can diffuse to grain boundaries (GBs) and be annihilated at GBs. However, the precise role of GBs in annihilating the segregated defects remains unclear. Here, we employed multi-scale models to determine how interstitials are annihilated at small-angle tilt GBs (STGBs) in SiC. First of all, we found the pipe diffusion of interstitials in STGBs is slower than bulk diffusion. This is because the increased interatomic distance at dislocation cores raises the migration barrier of interstitial dumbbells. Furthermore, we found both the annihilation of interstitials at jogs and jog nucleation from clusters are diffusion-controlled and can occur under off-stoichiometric interstitial fluxes. Finally, a dislocation line model is developed to predict the role of STGBs in annihilating radiation damage. This model includes defect flux to GBs, pipe diffusion in STGBs, and the interaction of defects with jogs. The model predicts the role of STGBs in annihilating defects depends on the rate of defects segregation to and diffusion along STGBs. STGBs mainly serve as diffusion channel for defects to reach other sinks when defect diffusivity is high at boundaries. As a result, when defect diffusivity is low, most of the defects segregated to STGBs are annihilated by dislocation climb.

36 MATERIALS SCIENCE↗