Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ROADS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Lubricating Oil Consumption on the Standard Road Cycle

Automobile manufacturers strive to minimize oil consumption from their engines due to the need to maintain emissions compliance over the vehicle life. Engine oil can contribute directly to organic gas and particle emissions as well as accelerate emissions degradation due to catalyst poisoning. During the Department of Energy Intermediate Ethanol Blends Catalyst Durability program, vehicles were aged using the Standard Road Cycle (SRC). In this program, matched sets of three or four vehicles were acquired; each vehicle of a set was aged on ethanol-free retail gasoline, or the same base gasoline blended with 10, 15, or 20% ethanol (E0, E10, E15, E20). The primary purpose of the program was to assess any changes in tailpipe emissions due to the use of increased levels of ethanol. Oil consumption was tracked during the program so that any measured emissions degradation could be appropriately attributed to fuel use or to excessive oil consumption. In addition, excessive oil consumption was used to help diagnose potential engine maintenance problems. This paper details the results of analysis of the available oil consumption records from this program. Oil consumption levels for the properly-functioning light-duty vehicles aged on the SRC in this program range from 0.015 to 0.090 g/km. On a fuel specific basis (g oil / kg fuel burned) results range from 0.16 to 1.14 g/kg (0.016% to 0.114 %). Results indicate no statistically significant effect of fuel ethanol level on oil consumption.

West, Brian H.↗

Simultaneous Reduction of NOx and Fuel Consumption for Off-Road Powertrains

Simultaneously reducing criteria pollutants and fuel consumption is important for clean air and improving vehicle total cost of ownership. The goal of this effort was focused on a 90% NOx reduction and 10% fuel savings for an off-road 407 kW diesel engine. The baseline was a production Fiat Powertrain 13L engine and aftertreatment system meeting 0.4 g/kW-hr NOx. The baseline system was quantified over the NRTC, RMC, new low load cycle and five field cycles. A next generation engine was built incorporating several fuel-efficient design features, including a higher compression ratio, increased fuel-rail pressure, low-friction piston rings, and a high-efficiency variable-geometry turbocharger. Cylinder deactivation and EGR pump technologies were added to this engine as well. The combination was optimized prior to adding advanced aftertreatment systems, showing the trade-off of engine out NOx and exhaust temperature. Two next-generation catalyst technologies were employed into a LO-SCR plus main SCR system, both with and without an electric heater upstream of the LO-SCR. These catalysts were hydrothermally aged to simulate significant field use. Dual SCR dosing with newly developed controls played a critical role in achieving the proper split between the upstream LO-SCR and the downstream main SCR. Adding a next generation mixer for the downstream SCR proved essential in obtaining the final results. The optimal configuration required adding an electric heater to elevate the exhaust temperature at the LO-SCR for early cycle NOx reduction. The final results showed a 94.8% NOx reduction and 15.7% fuel savings on the composite NRTC.

McCarthy, James [Eaton Corporation]↗

The Road to Useful Quantum Computers

Building a useful quantum computer is a grand science and engineering challenge, currently pursued intensely by teams around the world. In the 1980s, Richard Feynman and Yuri Manin observed independently that computers based on quantum mechanics might enable better simulations of quantum phenomena. Their vision remained an intellectual curiosity until Peter Shor published his famous quantum algorithm for integer factoring, and shortly thereafter a proof that errors in quantum computations can be corrected. Since then, quantum computing R&D has progressed rapidly, from small-scale experiments in university physics laboratories to well-funded industrial efforts and prototypes. Hype notwithstanding, quantum computers have yet to solve scientifically or practically important problems -- a target often called quantum utility. In this article, we describe the capabilities of contemporary quantum computers, compare them to the requirements of quantum utility, and illustrate how to track progress from today to utility. We highlight key science and engineering challenges on the road to quantum utility, touching on relevant aspects of our own research.

Emerging Technologies (cs.ET)↗

NGEE Arctic CO2, CH4 and Energy Eddy-Covariance (EC) Flux Tower Auxiliary Measurements, Council Road Mile Marker 71, Seward Peninsula, Alaska, 2017 - 2019

Measurements began in July 2017 and are made year-round (2017 seasonal only) on the tussock tundra with discontinuous permafrost at the Council Road Site on the Seward Peninsula. CO2, CH4 and energy fluxes using the Eddy Covariance (EC) technique (Baldocchi 2003) and meteorological measurements are reported as 30-minute averages. The tower site is registered with AmeriFlux as US-NGC. See http://ameriflux.lbl.gov/sites/siteinfo/US-NGC for more information. Reported data include: (1) additional/extra meteorological and eddy covariance CO2, CH4 and energy flux data, (2) binned spectra for the three wind components, the sonic temperature and gas densities together with the binned cospectra for covariances of w (vertical wind component) and gas densities, (3) binned ogives (cumulative (co)spectra) for the three wind components, the sonic temperature and gas densities, and (4) tower site footprint matrices. The majority of the files are *.csv with paired visualization footprint files as *.jpg. Meteorological and eddy covariance CO2, CH4 and energy flux data (AmeriFlux BASE data product) are available from AmeriFlux BASE US-NGC NGEE Arctic Council (Torn, 2020) https://doi.org/10.17190/AMF/1634883. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) near Utqiagvik (Barrow), Alaska and 2) multiple areas in the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

ESI-FTICR-MS Analysis of Organic Matter during Incubations with Nitrogen Addition, Teller Road Site, Seward Peninsula, Alaska

This dataset contains the results of the molecular characterization of water-extractable organic matter collected during soil microcosm incubations of tundra soil. The microcosms contained soil collected in April 2017 from the NGEE Arctic Teller Road Site at mile marker 27 (TL_MM27) near Intensive Site 9 (“Toeslope”) and Intensive Site 5 (“Plateau”). The incubations were conducted under an atmosphere of N2 at 8°C for 55 days, with or without addition of ammonium chloride (NH4Cl). Soils were extracted with deionized water and extracted using Bond Elut PPL cartridges prior to analysis. Molecular characterization was performed using electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI- FTICR-MS). Two data files are provided with this dataset. The first is the summary, by soil type and treatment, of the mass spectrometry results for formulas (as a % of the total) containing C, H, and O only, and with N, S, and other elements. These formulas were then grouped into nine biochemical classes of compounds based on O:C and H:C ratios. The second file provides soil sample characteristics and the processed high-resolution mass spectrometry results by soil type and treatment.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a 10-year research effort (2012-2022) to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy’s Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy’s Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

Concentration variations in primary and secondary particulate matter near a major road in Korea

Here, particle-phase concentrations were measured at 10, 80, and 200 m from the roadside of a national highway near Seoul in January and May 2008. The highway has two lanes each way, with an average hourly traffic volume of 1,070 vehicles. In January 2008, PM 10 concentrations decreased from 10 to 80 m but increased at 200 m. Black carbon (BC) decreased only slightly with distance due to the influence of biomass burning and open burning from the surrounding areas. In May 2008, the effect of secondary formation on both PM 10 and PM 2.5 was significant due to high temperatures compared with January. Because on-road emissions had little effect on secondary formation for a short time, variations in PM 10 concentrations became smaller, and PM 2.5 concentrations increased with distance. The effects of fugitive dust on PM concentrations were greater in May than in January when the mean temperature was below freezing. In the composition variations, the amounts of primary ions, organic carbon (OC), and BC were larger in January, while those of secondary ions and others were larger in PM 10 , as well as PM 2.5 in May.

09 BIOMASS FUELS↗

Metagenomes and Metagenome-Assembled Genomes from Microbial Communities in a Biological Nutrient Removal Plant Operated at Hamptons Road Sanitation District (HRSD) with High and Low Dissolved Oxygen Conditions

In this study, we aimed to evaluate Biological Nutrient Removal (BNR) and investigate microbial community changes as the dissolved oxygen is reduced in the aerated portions of wastewater treatment trains. We present a dataset of Metagenome-Assembled Genomes (MAGs) obtained from activated sludge collected from the Hamptons Road Sanitation District (HRSD) BNR plant at the beginning of operation, when the DO was high, and at the end of operation, when the DO was low.

Genomics↗

Metagenomes and Metagenome-Assembled Genomes from Microbial Communities in the Hamptons Road Sanitary District (HRSD) Biological Nutrient Removal Pilot Plant Operated with High and Low Dissolved Oxygen Conditions

In this study, we aimed to evaluate BNR and investigate microbial community changes when the DO is reduced in the aerated portions of wastewater treatment trains. We present a dataset of metagenomes obtained from activated sludge collected from the Hamptons Road Sanitary District treatment plant at the beginning of operation, when the DO was high, and at the end of operation, when the DO was low

dissolved oxgyen↗

The ROAD program

The philosophy, history, operation, calibration of and some analyses with the ROAD (Rapid Orbit Analysis and Determination) program are described. This semi-numeric trajectory program integrates and analyses mean element variations for earth orbits with great efficiency. Through it's use, extensive zonal, resonant harmonic and earth tidal determinations have been made at Goddard Space Flight Center since 1969.

Wagner, C. A.↗

Feasibility demonstration of a road vehicle fueled with hydrogen-enriched gasoline

Evaluation of the concept of using hydrogen-enriched gasoline in a modified internal combustion engine in order to make possible the burning of ultralean mixtures. The use of such an engine in a road vehicle demonstrated that the addition of small quantities of gaseous hydrogen to gasoline resulted in significant reductions in exhaust emissions of carbon monoxide and nitrogen oxides as well as in thermal efficiency improvements of the engine performance.

Hoehn, F. W.↗

Effects of road traffic background noise on judgments of individual airplane noises

Two laboratory experiments were conducted to investigate the effects of road-traffic background noise on judgments of individual airplane flyover noises. In the first experiment, 27 subjects judged a set of 16 airplane flyover noises in the presence of traffic-noise sessions of 30-min duration consisting of the combinations of 3 traffic-noise types and 3 noise levels. In the second experiment, 24 subjects judged the same airplane flyover noises in the presence of traffic-noise sessions of 10-min duration consisting of the combinations of 2 traffic-noise types and 4 noise levels. In both experiments the airplane noises were judged less annoying in the presence of high traffic-noise levels than in the presence of low traffic-noise levels.

Powell, C. A.↗

Comparing the relationships between noise level and annoyance in different surveys - A railway noise vs. aircraft and road traffic comparison

Annoyance expressed in a railway noise survey is compared with that from two road traffic and three aircraft surveys in order to determine whether responses to various types of environmental noise are source-specific. Railway noise is found to be less annoying than other noises at any given high noise level. Railway noise annoyance rises less rapidly with increasing noise level. At high levels, this gap in reactions averages about 10 dB; it ranges from 4 dB to more than 20 dB. The methods used for comparing the surveys are examined. It is found that methodological uncertainties lead to imprecise comparisons and that different annoyance scales yield different estimates of intersurvey differences.

Fields, J. M.↗

Tests of an alternating current propulsion subsystem for electric vehicles on a road load simulator

The test results of a breadboard version of an ac electric-vehicle propulsion subsystem are presented. The breadboard was installed in the NASA Lewis Research Center Road Load Simulator facility and tested under steady-state and transient conditions. Steady-state tests were run to characterize the system and component efficiencies over the complete speed-torque range within the capability of the propulsion subsystem in the motoring mode of operation. Transient tests were performed to determine the energy consumption of the breadboard over the acceleration and cruise portions of SAE J227 and driving schedules B, C, and D. Tests in the regenerative mode were limited to the low-gear-speed range of the two speed transaxle used in the subsystem. The maximum steady-state subsystem efficiency observed for the breadboard was 81.5 percent in the high-gear-speed range in the motoring mode, and 76 percent in the regenerative braking mode (low gear). The subsystem energy efficiency during the transient tests ranged from 49.2 percent for schedule B to 68.4 percent for Schedule D.

Stenger, F. J.↗

Steady-state and dynamic evaluation of the electric propulsion system test bed vehicle on a road load simulator

The propulsion system of the Lewis Research Center's electric propulsion system test bed vehicle was tested on the road load simulator under the DOE Electric and Hybrid Vehicle Program. This propulsion system, consisting of a series-wound dc motor controlled by an infinitely variable SCR chopper and an 84-V battery pack, is typical of those used in electric vehicles made in 1976. Steady-state tests were conducted over a wide range of differential output torques and vehicle speeds. Efficiencies of all of the components were determined. Effects of temperature and voltage variations on the motor and the effect of voltage changes on the controller were examined. Energy consumption and energy efficiency for the system were determined over the B and C driving schedules of the SAE J227a test procedure.

Dustin, M. O.↗

Aerodynamic Design of Road Vehicles

Guidebook discusses design of road vehicles to reduce aerodynamic drag. Book presents strategy for integrating aerodynamic design into vehicle design. Book written for readers lacking experience in aerodynamics.

Kurtz, D. W.↗

Road load simulator tests of the Gould phase 1 functional model silicon controlled rectifier ac motor controller for electric vehicles

The test results for a functional model ac motor controller for electric vehicles and a three-phase induction motor which were dynamically tested on the Lewis Research Center road load simulator are presented. Results show that the controller has the capability to meet the SAE-J227a D cycle test schedule and to accelerate a 1576-kg (3456-lb) simulated vehicle to a cruise speed of 88.5 km/hr (55 mph). Combined motor controller efficiency is 72 percent and the power inverter efficiency alone is 89 percent for the cruise region of the D cycle. Steady state test results for motoring, regeneration, and thermal data obtained by operating the simulator as a conventional dynamometer are in agreement with the contractor's previously reported data. The regeneration test results indicate that a reduction in energy requirements for urban driving cycles is attainable with regenerative braking. Test results and data in this report serve as a data base for further development of ac motor controllers and propulsion systems for electric vehicles. The controller uses state-of-the-art silicon controlled rectifier (SCR) power semiconductors and microprocessor-based logic and control circuitry. The controller was developed by Gould Laboratories under a Lewis contract for the Department of Energy's Electric and Hybrid Vehicle program.

Gourash, F.↗