Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFRACTIVE INDEX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Refractive index change dependence on Ge(1) defects in {gamma}-irradiated Ge-doped silica

We present an experimental study regarding the effects of the {gamma} radiation on silica glass doped with Ge up to 10 000 ppm molar produced by the sol-gel technique. We have determined the irradiation-induced changes in the refractive index ({delta}n) as a function of the oxygen deficiency of the samples, evaluated from the ratio between the germanium lone pair centers (GLPC) and the Ge content. {delta}n at 1500 nm have been estimated using optical-absorption spectra in the range 1.5-6 eV. We have found that {delta}n is independent of Ge differences for GLPC/Ge values <10{sup -4}, while it depends on Ge for larger oxygen deficiencies. In details, the oxygen deficiency can reduce the induced {delta}n of the investigated materials and our studies evidence that the photosensitivity of the GeO{sub 2}-SiO{sub 2} glass is reduced until the GLPC concentration reaches values of 2x10{sup 17}-5x10{sup 17} defects/cm{sup 3}. We have also investigated the induced concentration of paramagnetic point defects [Ge(1), Ge(2), and E'Ge] using the electron-paramagnetic-resonance (EPR) technique. From the comparison of the optical and EPR data we have further found a relation between the induced optical-absorption coefficient at 5.8 eV and Ge(1) defects, a linear correlation between Ge(1) and {delta}n and the absence of a correlation between the other paramagnetic defects and {delta}n. These findings suggest that the {delta}n phenomenology is closely related to the Ge(1) generation mechanisms and this latter is affected by the oxygen defic0011ien.

36 MATERIALS SCIENCE↗

Controlling a microdisk laser by local refractive index perturbation

We demonstrate a simple yet effective approach of controlling lasing in a semiconductor microdisk by photo-thermal effect. A continuous wave green laser beam, focused onto the microdisk perimeter, can enhance or suppress lasing in different cavity modes, depending on the position of the focused beam. Its main effect is a local modification of the refractive index of the disk, which results in an increase in the power slope of some lasing modes and a decrease of others. The boundary roughness breaks the rotational symmetry of a circular disk, allowing the lasing process to be tuned by varying the green beam position. Using the same approach, we can also fine tune the relative intensity of a quasi-degenerate pair of lasing modes. Such post-fabrication control, enabled by an additional laser beam, is flexible and reversible, thus enhancing the functionality of semiconductor microdisk lasers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dependence of synergy current driven by lower hybrid wave and electron cyclotron wave on the frequency and parallel refractive index of electron cyclotron wave for Tokamaks

The physical mechanism of the synergy current driven by lower hybrid wave (LHW) and electron cyclotron wave (ECW) in tokamaks is investigated using theoretical analysis and simulation methods in the present paper. Research shows that the synergy relationship between the two waves in velocity space strongly depends on the frequency ω and parallel refractive index N{sub //} of ECW. For a given spectrum of LHW, the parameter range of ECW, in which the synergy current exists, can be predicted by theoretical analysis, and these results are consistent with the simulation results. It is shown that the synergy effect is mainly caused by the electrons accelerated by both ECW and LHW, and the acceleration of these electrons requires that there is overlap of the resonance regions of the two waves in velocity space.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

3D printed transparent ceramic YAG laser rods: Matching the core-clad refractive index

Yttrium Aluminum Garnet (YAG) solid state laser gain media rods with an active Neodymium-doped core and an optically-clear cladding region were additively manufactured via direct-ink-writing (DIW), followed by sintering and hot isostatic pressing to form fully dense optical ceramics. Lutetium and Gadolinium were chosen as optically-inert co-doping ions in the clad to match the increase in refractive index caused by the Neodymium in the core. Additionally, either 11.6% Lutetium or 3.8% Gadolinium can be used to match the index change from 2% neodymium; however, differences in diffusion distances across the core-clad interface lead to large fluctuations in index in that region. These index fluctuations can be minimized either by matching dopants with similar diffusion distances, or by implementing a gradual gradient in the doping profile, possible through DIW, rather than a sharp compositional interface attainable via more standard fabrication methods. This improvement in index homogeneity resulted in a 40% improvement in lasing performance compared with that of a core-clad rod fabricated with a sharp interface between the doped and undoped regions.

36 MATERIALS SCIENCE↗

Simultaneous detection of refractive index and surface charges in nanolaser biosensors

The emission intensity of a GaInAsP photonic crystal nanolaser is affected by the pH of the solution, in which the nanolaser is immersed. This phenomenon can be explained by the change in the redox potential, which modifies the filling of electrons at surface states of the semiconductor and hence the nonradiative surface recombination. This phenomenon allows the nanolaser to simultaneously and independently detect the refractive index and electric charges near the surface on the basis of the variation in emission wavelength and intensity, respectively. This paper demonstrates this function through alternate deposition of charged polyelectrolytes and hybridization of deoxyribonucleic acids.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Near- to mid-IR refractive index of {sup 28}Si, {sup 29}Si and {sup 30}Si monoisotopic single crystals

We have prepared {sup 28}Si, {sup 29}Si and {sup 30}Si single crystals with enrichments above 99.9 at % and a silicon single crystal of natural isotopic composition. The oxygen and carbon concentrations in all the crystals are within 5x10{sup 15} cm{sup -3}, and the content of metal impurities is 0.01 - 0.1 ppma. The refractive index of the crystals has been determined in the range 1.05-25.5 {mu}m using interference refractometry, and its dispersion and material dispersion have been determined. (letters)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of thickness, refractive index, and spectral scattering of an inhomogeneous thin film with rough interfaces

The magnitude of spectral transmittance and reflectance is affected by the presence of inhomogeneity and interfacial roughness. Therefore, the methods, based on the magnitude of spectral transmittance and reflectance, are not adequate for the determination of thickness and optical constants of films with inhomogeneity and interfacial roughness. The present article proposes a method for the determination of thickness and refractive index using only the positions of the interference fringes in spectral transmittance and reflectance at two different angles of incidence. The proposed method is verified through numerical simulations, which result in <1% error for the film thickness. The complete parametrical dependence of spectral transmittance and reflectance of inhomogeneous film with rough interfaces on a substrate have been worked out for the film on transparent and opaque substrates, respectively. The spectrum envelopes have been solved simultaneously and the mathematical formulae are given for the determination of spectral scattering due to inhomogeneity and interfacial roughness for both transmittance and reflectance cases.

36 MATERIALS SCIENCE↗

Highly birefringent suspended-core photonic microcells for refractive-index sensing

An in-line photonic microcell with a highly birefringent suspended microfiber core is fabricated by locally heating and pressurizing selected air-holes of an endless single mode photonic crystal fiber. The microfiber core has rhombus-like cross-sectional geometry and could achieve a high birefringence of up to 10{sup −2}. The microfiber core is fixed at the center of the microcell by thin struts attached to an outer jacket tube, which protects and isolates the microfiber from environmental contaminations. Highly sensitive and robust refractive index sensors based on such microcells are experimentally demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Design of refractive index sensing based on 2D PhC air-slot width-modulated line-defect microcavity

In this paper, we propose an investigated sensor array based on two-dimensional photonic crystal air-slot width-modulated line-defect microcavity. This sensor consists of a waveguide coupled with microcavity. To achieve a high quality factor, we have tuned some parameters of the microcavity. The principle of sensing is based on the resonance wavelength shift when the refractive index is changed. For sensitivity analysis, we proposed various conventional designs (A–D). We demonstrated that the design D has the highest sensitivity. An air-slot is created within the line-defect. The existence of the slots enhances the light-matter interactions. The simulation results are obtained by using finite-deference time-domain method. The sensitivity can achieve 400 nm/RIU, with detection limit of 2.98 × 10{sup −5} RIU.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The local surface plasmon resonance property and refractive index sensitivity of metal elliptical nano-ring arrays

In this paper, we systematically investigate the optical property and refractive index sensitivity (RIS) of metal elliptical nano-ring (MENR) arranged in rectangle lattice by finite-difference time-domain method. Eight kinds of considered MENRs are divided into three classes, namely fixed at the same outer size, at the same inner size, and at the same middle size. All MENR arrays show a bonding mode local surface plasmon resonance (LSPR) peak in the near-infrared region under longitudinal and transverse polarizations, and lattice diffraction enhanced LSPR peaks emerge, when the LSPR peak wavelength (LSPRPW) matches the effective lattice constant of the array. The LSPRPW is determined by the charge moving path length, the parallel and cross interactions induced by the stable distributed charges, and the moving charges inter-attraction. High RIS can be achieved by small particle distance arrays composed of MENRs with big inner size and small ring-width. On the other hand, for a MENR array, the comprehensive RIS (including RIS and figure of merit) under transverse polarization is superior to that under longitudinal polarization. Furthermore, on condition that compared arrays are fixed at the same lattice constant, the phenomenon that the RIS of big ring-width MENR arrays may be higher than that of small ring-width MENR arrays only appears in the case of compared arrays with relatively small lattice constant and composed of MENRs fixed at the same inner size simultaneously. Meanwhile, the LSPRPW of the former MENR arrays is also larger than that of the latter MENR arrays. Our systematic results may help experimentalists work with this type of systems.

36 MATERIALS SCIENCE↗

Chemically Responsive Elastomers Exhibiting Unity-Order Refractive Index Modulation

Chameleons are masters of light, expertly changing their color, pattern, and reflectivity in response to their environment. Engineered materials that share this tunability can be transformative, enabling active camouflage, tunable holograms, and novel colorimetric medical sensors. Although progress has been made in creating artificial chameleon skin, existing schemes often require external power, are not continuously tunable, and may prove too stiff or bulky for applications. In this work, a chemically tunable, large-area metamaterial is demonstrated that accesses a wide range of colors and refractive indices. An ordered monolayer of nanoresonators is fabricated, then its optical response is dynamically tuned by infiltrating its polymer substrate with solvents. The material shows a strong magnetic response with a dependence on resonator spacing that leads to a highly tunable effective permittivity, permeability, and refractive index spanning negative and positive values. The unity-order index tuning exceeds that of traditional electro-optic and photochromic materials and is robust to cycling, providing a path toward programmable optical elements and responsive light routing.

36 MATERIALS SCIENCE↗

Refractive Index and Abbe Number Tuning via 3D Printable Optical Quality Silica–Titania–Germania Glasses

The development of optical quality GeO 2 –TiO 2 –SiO 2 glasses compatible with direct ink writing (DIW) 3D printing is reported in this study. Colloidal GeO 2 and TiO 2 –SiO 2 core–shell feedstocks are prepared by a sol–gel method and converted to printable inks for DIW. Printed inks are subsequently densified to glass using heat treatment at temperatures up to 1100 °C in air. A series of print‐compatible glass compositions are prepared, yielding transparent glass with the highest refractive index n = 1.576. Herein, it is shown that more TiO 2 can be incorporated into the glass without haziness or scattering through the addition of GeO 2 . The mechanisms for this are discussed, and it is shown that crystallization persists in these glasses despite the lack of visible light scattering. Finally, the combination of both TiO 2 and GeO 2 into a ternary glass also is used to independently tune the dispersion properties of the glass, as demonstrated by measured refractive indices and Abbe numbers, which has potential implications for 3D‐printed optics.

36 MATERIALS SCIENCE↗

Negative real parts of the equivalent permittivity, permeability, and refractive index of sculptured-nanorod arrays of silver

Thin films comprising parallel nanorods were deposited by directing silver vapor obliquely toward a plane substrate. The direction of the vapor flux was varied in two different ways to sculpture the nanorods in different shapes. The reflection and transmission coefficients of the thin films were measured at three wavelengths in the visible regime for normal-illumination conditions for two linear-polarization states, using walk-off interferometry and polarization interferometry. The authors found that sculpturing significantly affects the signs of the real parts of the equivalent permittivity, permeability, and refractive index of the silver thin films for the two polarization states at different wavelengths. Thus, vapor deposition combined with sculpturing can be useful for large-scale production of materials having different equivalent constitutive parameters with negative real parts.

36 MATERIALS SCIENCE↗

Refractive index from negative to positive with frequencies at the Dirac-like cone in a photonic crystal

In this paper, we numerically study the threefold accidental degeneracy conical dispersion (Driac-like cone) at the Brillouin zone center of the two-dimensional photonic crystals, which are composed of silicon pillars arranging in a triangular lattice. The effective permittivity and permeability near the Dirac-like point evolve from negative to positive by using the method of eigen-field averaging. Also, the isotropic behaviour of the Dirac-like cone is revealed by analysing the isofrequency contours. Moreover, we carry out numerical simulations including the reverse Snell’s law effect, negative Goos–Hänchen shifts and superfocusing lens to verify the negative refractive index characteristics of the designed structure. The proposed structure might find significant applications in the on-chip photonic interconnect and the photonic integrated circuit techniques.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interferometric measurements of refractive index and dispersion at high pressure

Abstract We describe a high precision interferometer system to measure the pressure dependence of the refractive index and its dispersion in the diamond anvil cell (DAC). The reflective Fabry–Perot fringe patterns created by both a white light and a monochromatic beam are recorded to determine both the sample thickness and its index at the laser wavelength and to characterize the dispersion in the visible range. Advances in sample preparation, optical setup, and data analysis enable us to achieve $$10^{-4}$$ 10 - 4 random uncertainty, demonstrated with an air sample, a factor of five improvement over the best previous DAC measurement. New data on $${\text{H}}_{2}\text{O}$$ H 2 O liquid water and ice VI up to 2.21 GPa at room temperature illustrate how higher precision measurements of the index and its optical dispersion open up new opportunities to reveal subtle changes in the electronic structure of water at high pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

General technique for measurement of refractive index variations

Time variation of amplitude and phase fluctuations, impressed on waves propagating through a medium which has a randomly varying refractive index, is used to examine isolated regions along the line of propagation. Technique employs only one antenna at each end of the line.

Source record↗

Optical constants, single-oscillator modal and refractive index dispersion analysis of lithium zinc bismuth borate glasses doped with Eu{sup 3+} ions

The glasses of composition xLi{sub 2}O-15ZnO- 20Bi{sub 2}O{sub 3}- (64 - x) B{sub 2}O{sub 3}- 1EuO (ZLB) (where x=0, 5, 10, 15, 20 mole %) prepared by melt-quenching technique. The amorphous nature of the prepared glasses was confirmed by XRD spectra. The UV-Vis optical absorption spectrum was recorded in the wave length range of 200-1000 nm. It is observed that the optical band gap is inversely changing with Urbach energy. The optical constants such as G (a constant proportional to the second-order deformation potential) and E{sub f} (a constant that depends on local coordination and is called as free energy of the glass system). The most significant result of the present work is the refractive index dispersion curves of the ZLB glasses obey the single-oscillator model and oscillator parameters (E{sub o}, E{sub d}) changed with the Li{sub 2}O content. the absorption edge, band gap and Urbach energy is changing nonlinearly with increasing content of Li{sub 2}O, which can be used to calculate the optical, physical, and other constants.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗