Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REAGENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Synthesis of Sandwich-α-Diimine Ligands via Copper-Mediated Stille Coupling

While sandwich diimines have found use in transition metal catalysis, the general method for their preparation has been lacking. Here, this approach utilizes a copper-mediated Stille-type coupling between aryl stannanes and α-diimines bearing 8-bromonaphthylimino group in commercial-grade N,N-dimethylformamide solvent and employs CuI or thiophene-2-carboxylate to promote the reactions. No other additives or bases are required. Electron-poor, electron-rich, heterocyclic, and hindered aryl stannanes can be employed as coupling reagents. Ligand scaffolds derived from structurally diverse α-diketones can be used.

Catalysts↗
DOE OSTI2025

How Thermodynamic, Electronic, and Steric Factors Influence Mesitylcopper Oligomers

Mesitylcopper (CuMes) is a highly versatile organocopper reagent used in both organic and inorganic syntheses. It has previously been shown that CuMes exists as a tetrameric or pentameric cyclic oligomer [CuMes] n (n = 4, 5), both in solution and in the solid state. The bonding arrangement between the [CuMes] units has qualitatively been described as localized three-center twoelectron (3c-2e) bonds. However, the electronic, structural, and thermodynamic forces driving this aggregation are still not well understood. For this reason, we employed density functional theory (DFT) calculations to study mesitylcopper as a monomeric [CuMes] unit and [CuMes]n oligomers with n = 2 to n = 7. We found that there is a strong electronic driving force for aggregation caused by strong mixing between the Cu’s d orbitals and Mes’s π orbitals in oligomers larger than the dimer. This mixing is only optimized in oligomers with n ≥ 3, where the mesityl group is no longer bonded to a single copper center but instead becomes a bridging ligand. Beyond the trimer, steric and entropic factors become relevant for determining the relative stabilities of the different aggregates, with midsized oligomers (n = 4−5) having the optimal balance between the electronic Cu−C bonding character, Cu···Cu attractive forces, entropy, reduced internal ring strain, and reduced steric interactions between the mesityl groups.

Copper↗
DOE OSTI2026

The Reaction of Atomic Hydrogen with an Imine: Direct Kinetic Measurements and Computational Studies

Imines are of interest in the combustion modeling of nitrogen-based fuels such as ammonia, as intermediates in atmospheric oxidation of amines, and may offer a new class of environmentally benign substitutes for perhalogenated reagents. Elementary gas-phase rate constants for the consumption of H atoms by 1,1,1,3,3,3-hexafluoro-2-propanimine were measured over 294–736 K using the laser flash photolysis/atomic resonance fluorescence technique. The results are summarized as 3.0 × 10 –11 exp(−14.5 kJ mol –1 /RT) cm 3 molecule –1 s –1 with a confidence interval of ±13%. These are the first temperature-dependent kinetic experiments on an imine of the form R 2 C═NH and thereby provide the only validation of transition-state modeling for such systems. Several pathways are feasible; comparison of theory and experiment suggests the dominant channel is addition of H atoms to the nitrogen atom. On this basis, the observations are rationalized quantitatively. Computations also yield the thermochemistry of (CF 3 ) 2 CNH, with Δ f H 298 = −1232 kJ mol –1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Fermi-Based Kinetic Model for the Sabatier Reaction: Sabatier Principle and Beyond It

The CO 2 methanation reaction (aka the Sabatier reaction) is one of the important carbon utilization technologies to reduce atmospheric greenhouse gases. In this study, kinetic modeling of the Sabatier reaction proceeding via the CO route has been presented by considering weak and strong chemisorption concepts rooted in electronic theory. Based on the single-route mechanism of the Sabatier reaction, the dependence of the reaction rate on the position of the catalyst Fermi level with respect to the antibonding states of the reagent (CO 2 ) and the product (CH 4 ), is demonstrated with the classic Sabatier volcano-shape. Furthermore, the model was applied to explain experimental results of reaction rates for Ni- and Ru-based catalytic systems and to understand origin of enhancement of turnover frequencies established for dynamic catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Tailorable Micelle Morphology in Self-Assembling Block Copolymer Gels for Templating Nanoporous Ceramics

The self-assembly of block copolymers offers opportunities for the facile organization and templating of inorganic nanomaterials. Here, we describe a morphology map for a poly(methyl methacrylate)-b-poly(n-butyl acrylate)-b-poly(methyl methacrylate) (PMMA-b-PnBA-b-PMMA) block copolymer/polycarbosilane system that allows for tunable control over nanoscale micelle geometry via manipulation of the preceramic polymer content. We produced gels with spherical, wormlike, and bicontinuous morphologies, which were processed to create silicon carbide-based ceramic structures with tunable nanoscale porosities. The role of the constituent polymers in influencing the structure and rheology of this system is discussed. The PMMA-b-PnBA-b-PMMA block copolymer/preceramic polymer system offers a number of advantages including: (i) commercial availability, (ii) rapid self-assembly kinetics, and (iii) successful conversion of the self-assembled nanostructure to ceramic via pyrolysis. Finally, this system may be useful for catalytic, structural, or thermal applications in both industrial and academic settings because of its ease of use and relatively inexpensive reagents.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Impact of Hydroxyl Functionalization and Unsaturation on Linear Poly(ethylene- co -vinyl alcohol)

Functionalization of C═C in unsaturated polyolefins by hydroboration/oxidation successfully generates linear poly(ethylene-co-vinyl alcohol) (LEVOH) polymers. This postpolymerization modification expands upon previously reported chemistry to control the extent of functionalization through reagent stoichiometry. Partial functionalization (24–92% of C═C) of polycyclooctene produces materials with both C═C in the backbone and pendant OH and subsequent hydrogenation generate a LEVOH. We explore the thermal, structural, surface, and adhesive properties of these LEVOH and the partially unsaturated intermediate and find they are impacted by both the extent of OH incorporation and saturation. The presence of C═C significantly reduces the melting temperature and crystallinity while increasing surface polarity and adhesive strength compared with saturated polymers at equivalent functionalization. Furthermore, this investigation demonstrates linear analogs of EVOH with a wide range of properties tuned by extent of hydroxylation and presence of unsaturation.

Crystal structure↗
DOE OSTI2020

Coordination-Induced N–H Bond Weakening in a Molybdenum Pyrrolidine Complex: Isotopic Labeling Provides Insight into the Pathway for H 2 Evolution

The synthesis and characterization of a cationic molybdenum pyrrolidine complex is described that exhibits significant coordination-induced N–H bond weakening. Here, the N–H bond dissociation free energy (BDFE) of the coordinated pyrrolidine in [( Ph Tpy)(PPh 2 Me) 2 Mo(NH(pyrr))][BArF 24 ] ([1-NH(pyrr)] + ; PhTpy = 4'-Ph-2,2',6',2''-terpyridine, NH(pyrr) = pyrrolidine, ArF 24 = [C 6 H 3 -3,5-(CF 3 ) 2 ] 4 ) was determined to be between 41–51 kcal mol -1 by thermochemical analysis and supported by a density functional theory (DFT) computed value of 48 kcal mol -1 . The complex [1-NH(pyrr)] + underwent proton-coupled electron transfer (PCET) to 2,4,6-tri-tert-butylphenoxyl radical, as well as spontaneous H 2 evolution upon gentle heating to furnish the corresponding molybdenum pyrrolidide complex, [( Ph Tpy)(PPh 2 Me) 2 Mo(N(pyrr))][BArF 24 ] ([1-N(pyrr)] + ). Thermolysis of the deuterated isotopolog, [1-ND(pyrr)] + still produced H 2 with concomitant incorporation of the isotopic label into the pyrrolidide ligand in the product [(1-N(pyrr-d n )] + (n = 0–2), consistent with an H 2 evolution pathway involving intramolecular H–H bond formation followed by an intermolecular product-forming PCET step. These observations provide context for understanding H 2 evolution in the nonclassical ammine complex [( Ph Tpy)(PPh 2 Me) 2 Mo(NH 3 )][BArF 24 ] ([1-NH 3 ] + ) and are supported by DFT-computed reaction thermochemistry. Overall, these studies offer rare insight into the H 2 formation pathway in nonclassical amine complexes with N–H BDFEs below the thermodynamic threshold for H 2 evolution and inform the development of well-defined, thermody-namically potent PCET reagents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Spectroscopic, Magnetic, and Computational Investigations on a Series of Rhenium(III) Cyclopentadienide β-diketiminate Halide and Pseudohalide Complexes

Here the low-valent rhenium(I) salt Na[Re(η 5 -Cp)(BDI)] (BDI = N,N'-bis(2,6-diisopropylphenyl)-3,5-dimethyl-β-diketiminate) was shown to react with various halide and chalcogenolate reagents, leading to the isolation of a series of rhenium(III)-halide and -pseudohalide complexes: Re(X)(η 5 -Cp)(BDI) (1-X, X = F, Cl, Br, I; 2, X = OTf) and Re(ER)(η 5 -Cp)(BDI) (3-ER, ER = SBn, SeBn, TePh). The 1 H NMR spectra of these complexes displayed sharp resonances shifted several ppm from typical diamagnetic regions, as well as distinct chemical shift trends down both the halide (with the exception of F) and chalcogenolate series, with both Cp and BDI backbone peaks moving downfield with increasing atomic number. Subsequent magnetic susceptibility measurements of the rhenium(III) halides 1-Cl, 1-Br, and 1-I indicated that these complexes display temperature-independent paramagnetism (TIP), with χ TIP values of 7.41(44) × 10 -4 to 1.50(51) × 10 -3 cm 3 mol -1 . Multireference complete active space self-consistent field (CASSCF) computations incorporating spin-orbit state mixing revealed small energy separations (1.7-3.0 kcal/mol) between thermally isolated ground states and the first excited spin-orbit states for the rhenium halides, confirming that low-lying excited states are responsible for the observed TIP behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Reactivity of [Tism Pr i Benz ]MgH and [Tism Pr i Benz ]MgMe towards Carbonyl Compounds: Access to Terminal Alkoxide and Enolate Complexes

The hydride and methyl compounds [Tism Pr i Benz ]MgH and [Tism Pr i Benz ]MgMe undergo insertion of the carbonyl moieties of non-enolizable aldehydes and ketones such as PhCHO and Ph 2 CO into the Mg–H and Mg–Me bonds to form alkoxide compounds, namely [Tism Pr i Benz ]MgOCH 2 Ph, [Tism Pr i Benz ]MgOCHPh 2 , [Tism Pr i Benz ]MgMOCH(Me)Ph and [Tism Pr i Benz ]MgOCMePh 2 . In contrast to the insertion of the carbonyl moiety, the reactions of the enolizable ketones Me 2 CO and PhC(O)Me with [Tism Pr i Benz ]MgMe afford the enolate complexes, [Tism Pr i Benz ]MgOC(Me)=CH 2 and [Tism Pr i Benz ]MgOC(Ph)=CH 2 . The formation of [Tism Pr i Benz ]MgOC(Me)=CH 2 is of note because methyl Grignard reagents preferentially react with acetone to form t-butoxide derivatives. The hydride compound, [Tism Pr i Benz ]MgH, also reacts with acetone to yield the enolate compound, [Tism Pr i Benz ]MgOC(Me)=CH 2 , but while the overall transformation is similar to that of the methyl derivative, [Tism Pr i Benz ]MgMe, the enolate compound is not the initially formed product. Specifically, acetone undergoes preferential insertion into the Mg–H bond to generate the corresponding alkoxide, [Tism Pr i Benz ]MgOPr i , which subsequently converts to the respective enolate in the presence of excess acetone. Furthermore, the relative ability of the hydride and methyl compounds to undergo insertion of carbonyl compounds into the Mg–H and Mg–Me bonds has been addressed computationally, which indicates that the barrier for insertion of the carbonyl group into the Mg–H bond is lower than that for insertion into the Mg–Me bond. The molecular structures of [Tism Pr i Benz ]MgOCH 2 Ph, [Tism Pr i Benz ]MgOCHPh 2 , [Tism Pr i Benz ]MgOCMePh 2 , [Tism Pr i Benz ]MgOC(Me)=CH 2 and [Tism Pr i Benz ]MgOC(Ph)=CH 2 have been determined by X-ray diffraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Photoresponsive Azobenzene-Functionalized Shell Cross-Linked Micelles for Selective Asymmetric Transfer Hydrogenation

We describe the substrate-selective asymmetric transfer hydrogenation of aromatic ketones using rhodium complexes immobilized on a photoresponsive nanoreactor. The nanoreactor is based on multifunctional amphiphilic poly(2-oxazoline)s that are covalently cross-linked with functionalized azobenzene after micelle formation in water. The nanoreactor switches its morphology upon light irradiation in a wavelength-selective manner as confirmed by dynamic light scattering. Kinetic studies show that the gated behavior induced by the phototriggered reversible isomerization of trans- azobenzene to cis- azobenzene in the cross-linking layer is key to discriminate among substrates and reagents during catalysis. Under UV light irradiation, the diffusion of larger substrates into the core is slower in comparison to smaller substrates. The nanoreactor displays substrate selectivity, converting smaller ketone-substrates faster to the corresponding secondary alcohols.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Insights into Chemical Prelithiation of SiO x /Graphite Composite Anodes through Scanning Electron Microscope Imaging

Initial Coulombic efficiency (ICE) is critical for determining the energy density of lithium-ion batteries (LIBs) used for practical applications; however, it is typically disregarded in anode research. We used SiO x and graphite composite anodes for commercial lithium-ion batteries in our preliminary research to achieve a balance between ICE, capacity, and cycling life. ICE reached 88%; however, it needs further improvement for commercial applications. Prelithiation is a process that involves the introduction of extra lithium ions into LIBs during their manufacturing to enhance the overall performance of the LIBs. We applied a chemical prelithiation method on our SiO x /graphite composite anodes, which comprised 95 wt % of the active material mass loading on the electrode. The ICE increased from 88% to 98% using an aryllithium reagent impregnation method within 2 min of prelithiation. The anode’s specific capacity density, rate, and cycle performance also significantly improved. Scanning electron microscopy (SEM) imaging enhanced by an osmium tetroxide staining method indicated that the P-anode contained a stable solid electrolyte interface (SEI) layer after the prelithiation process and cycling electrochemical test. The P-anode’s stable charge differential peak over 500 cycles also showcases a robust artificial SEI layer that was generated by the prelithiation procedure. Here, this prelithiation process has significant potential for adoption in the LIB industry’s current electrode manufacturing process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Rinse-Free, Sodium-Efficient Synthesis of O3-Type Layered Oxide Materials Enabled by Acetate Precursors

Sodium-ion batteries (SIBs) are a sustainable alternative to lithium-ion systems for global electrification, with O3-type layered oxide cathodes offering high specific capacity and feasibility of scalable synthesis. Industrial co-precipitation synthesis of these cathodes typically uses transition metal sulfates, requiring extensive water rinsing to remove Na 2 SO 4 impurities, a process that consumes significant water and risks residual inactive phases if incomplete. Here, this work introduces a rinse-free, resource-efficient approach using metal acetate precursors. Residual sodium acetate in non-rinsed precursors decomposes during sintering to generate Na 2 CO 3 in situ, partially substituting an external sodium resource (e.g., NaOH and Na 2 CO 3 ) and reducing its consumption by ∼18–20%. Phase-pure O3-Na 1.0 Ni 1/3 Fe 1/3 Mn 1/3 O 2 (NFM111) cathodes synthesized via this method exhibit microstructure and electrochemical performance comparable to rinsed sulfate-derived counterparts, with initial capacities of 141 mAh g −1 at C/20 (7.5 mA g −1 ). By eliminating rinsing and minimizing sodium reagent use, this acetate-based route enhances sustainability and scalability of layered oxide production for SIBs.

acetate vs. sulfate↗
DOE OSTI2020

Electron Transfer in Microemulsion-Based Electrolytes

The use of flowing electrochemical reactors, for example, in redox flow batteries and in various electrosynthesis processes, is increasing. This technology has the potential to be of central significance in the increased deployment of renewable electricity for carbon-neutral processes. A key element of optimizing efficiency of electrochemical reactors is the combination of high solution conductivity and reagent solubility. In this work, we show a substantial rate of charge transfer for an electrochemical reaction occurring in a microemulsion containing electroactive material is loaded inside the nonpolar (toluene) subphase of the microemulsion. The measured rate constant translates to an exchange current density comparable to that in redox flow batteries. The rate could be controlled by the surfactant, which maintains partitioning of reactants and products by forming an interfacial region with ions in the aqueous phase in close proximity. The hypothesized echanism is evocative of membrane-bound enzymatic reactions. Achieving sufficient rates of electrochemical reaction is the product of an effort designed to establish a reaction condition that meets the requirements of electrochemical reactors using microemulsions to realize a separation of conducting and reactive elements of the solution, opening a door to the broad use of microemulsions to effect controlled electrochemical reactions as steps in more complex processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Antibody Targeted Metal–Organic Frameworks for Bioimaging Applications

Here, we report on the availability and chemical utility of primary amines within metal–organic frameworks (MOFs) for cell targeting. Primary amine groups represent one of the most versatile chemical moieties for conjugation to biologically relevant molecules, including antibodies and enzymes. Specifically, we used two different chemical conjugations schemes, utilizing the amino functionality on the organic linker: first, carbodiimide chemistry was used to link the primary amine to available carboxyl groups on the protein neutravidin; second, sulfhydryl cross-linking chemistry was used via Traut’s reagent scheme. Importantly, this is the first report that documents this methodology implemented with MOF systems. Finally, the ability of the EpCAM antibody targeted MOFs to bind to a human epithelial cell line (A549), a common target for imaging studies, was confirmed with confocal microscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Performance of Spherical Quantum Well Down Converters in Solid State Lighting

We report the color conversion performance of amber and red emitting quantum dots (QDs) on InGaN solid-state lighting (SSL) light emitting diode (LED) packages. Spherical quantum well (SQW) architectures (CdS/CdSe 1- x S x /CdS) were prepared using a library of thio- and selenourea synthesis reagents and high throughput synthesis robotics. CdS/CdSe 1- x S x QDs with narrow luminescence bands were coated with thick CdS shells (thickness = 1.6-7.5 nm) to achieve photoluminescence quantum yields (PLQY) up to 88% at amber and red emission wavelengths (λ max = 600-642 nm, FWHM < 45 nm). The photoluminescence from SQWs encapsulated in silicone and deposited on LED packages was monitored under accelerated aging conditions (oven temperature = 85 °C, relative humidity = 5-85%, blue optical power density = 3-45 W/cm 2 ) by monitoring the red photon output over several hundred hours of continuous operation. The growth of a ZnS shell on the SQW surface increases the stability under long-term operation but also reduces the PLQY, especially of SQWs with thick CdS shells. The results illustrate that the outer ZnS shell layer is key to optimizing the PLQY and the long-term stability of QDs during operation on SSL packages.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Cooperativity in the Aldol Condensation Using Bifunctional Mesoporous Silica–Poly(styrene) MCM-41 Organic/Inorganic Hybrid Catalysts

This work explores the efficacy of silica/organic hybrid catalysts, where the organic component is built from linear aminopolymers appended to the silica support within the support mesopores. Specifically, the role of molecular weight and polymer chain composition in amine-bearing atom transfer radical polymerization-synthesized poly(styrene-co-2-(4-vinylbenzyl)isoindoline-1,3-dione) copolymers is probed in the aldol condensation of 4-nitrobenzaldehyde and acetone. Controlled polymerization produces protected amine-containing poly(styrene) chains of controlled molecular weight and dispersity, and a grafting-to thiol–ene coupling approach followed by a phthalimide deprotection step are used to covalently tether and activate the polymer hybrid catalysts prior to the catalytic reactions. Site-normalized batch kinetics are used to assess the role of polymer molecular weight and chain composition in the cooperative catalysis. Lower-molecular-weight copolymers are demonstrated to be more active than catalysts built from only molecular organic components or from higher-molecular-weight chains. Molecular dynamics simulations are used to probe the role of polymer flexibility and morphology, whereby it is determined that higher-molecular-weight hybrid structures result in congested pores that inhibit active site cooperativity and the diffusivity of reagents, thus resulting in lower rates during the reaction.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Enhanced CO 2 Methanation Activity of Sm 0.25 Ce 0.75 O 2-δ –Ni by Modulating the Chelating Agents-to-Metal Cation Ratio and Tuning Metal–Support Interactions

Highly active and selective CO 2 methanation catalysts are critical to CO 2 upgrading, synthetic natural gas production, and CO 2 emission reduction. Wet impregnation is widely used to synthesize oxide-supported metallic nanoparticles as the catalyst for CO 2 methanation. However, as the reagents cannot be homogeneously mixed at an atomic level, it is challenging to modulate the microstructure, crystal structure, chemical composition, and electronic structure of catalysts via wet impregnation. In this work, a scalable and straightforward catalyst fabrication approach has been designed and validated to produce Sm 0.25 Ce 0.75 O 2-δ -supported Ni (SDC–Ni) as the CO 2 methanation catalyst. By varying the chelating agents-to-total metal cations ratio (C/I ratio) during the catalyst synthesis, we can readily and simultaneously modulate the microstructure, metallic surface area, crystal structure, chemical composition, and electronic structure of SDC–Ni, consequently fine-tuning the oxide–support interactions and CO 2 methanation activity. The optimal C/I ratio (0.1) leads to an SDC–Ni catalyst that facilitates C–O bond cleavage and significantly improves CO 2 conversion at 250 °C. A CO 2 -to-CH 4 yield of >73% has been achieved at 250 °C. Furthermore, a stable operation of >1500 hours has been demonstrated, and no degradation is observed. Extensive characterizations were performed to fundamentally understand how to tune and enhance CO 2 methanation activity of SDC–Ni by modulating the C/I ratio. The correlation of physical, chemical, and catalytic properties of SDC–Ni with the C/I ratio is established and thoroughly elaborated in this work. This study could be applied to tune the oxide–support interactions of various catalysts for enhancing the catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗