Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polycrystalline structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Low temperature magnetocaloric effect in polycrystalline BiFeO{sub 3} ceramics

We report on the structural, thermal, and magnetic properties of polycrystalline BiFeO{sub 3} synthesized by sol-gel route. Powder x-ray diffraction data of the BiFeO{sub 3} sample was refined with rhombohedral structure with space group R3c. Magnetization and coercive field measurements showed weak ferromagnetic nature below 10 K. We also investigated the low temperature magnetocaloric effect in polycrystalline BiFeO{sub 3} ceramics. The anomalies observed in the magnetic entropy change of the BiFeO{sub 3} ceramics were close to that of low temperature phase transitions. The combined relative errors in the magnetic entropy change are found to vary from 4% to 15% with increase in temperature.

36 MATERIALS SCIENCE↗

Effect of Ni content on the structural, morphological and magnetic properties of spray deposited Ni–Zn ferrite thin films

Graphical abstract: The Ni{sub x}Zn{sub 1−x}Fe{sub 2}O{sub 4} (where x = 0.0, 0.2, 0.4, 0.6, 0.8, 1.0) thin films were prepared by spray pyrolysis technique onto the quartz substrates. The composition x = 0.4 shows the formation of the compact grain structure and highest saturation magnetization of 143 emu/cm{sup 3}. - Highlights: • Synthesis of nanocrystalline Ni{sub x}Zn{sub 1−x}Fe{sub 2}O{sub 4} thin films. • Influence of Ni substitution on physicochemical properties. • Electrical conductivity arises mainly from the grain boundary. • The highest saturation magnetization is 143 emu/cm{sup 3} for x = 0.4. - Abstract: The Ni{sub x}Zn{sub 1−x}Fe{sub 2}O{sub 4} thin films have been prepared using a simple spray pyrolysis technique. The X-ray diffraction studies reveal that, the films are polycrystalline with spinel structure. The lattice parameters vary in the range of 8.35–8.48 Å with composition (x) obeying Vegard’s rule. SEM and AFM studies show that the surface of the films exhibit a smooth, compact and a pin hole free morphology. Raman spectra indicate first order Raman active modes; A{sub 1g} (λ = 334 cm{sup −1}); E{sub g} (λ = 148 cm{sup −1}) and T{sub 2g} (λ = 699) of the Ni{sub x}Zn{sub 1−x}Fe{sub 2}O{sub 4}. The investigation on dielectric constant, dielectric loss tangent and ac conductivity was carried out in the frequency range 20 Hz–1 MHz at room temperature. The linear nature of the AC conductivity shows small polaron type of hopping mechanism. The saturation magnetization increases up to x = 0.4 (143 emu/cm{sup 3}), which decreases for higher x.

36 MATERIALS SCIENCE↗

Small-Angle X-ray Scattering Analysis of Colloidal Crystals and Replica Materials Made from L-Arginine-Stabilized Silica Nanoparticles

Colloidal crystals made from sub-100 nm silica nanoparticles have provided a versatile platform for the template-assisted synthesis of three-dimensionally interconnected semiconducting, metallic, and magnetic replicas. However, the detailed structure of these materials has not yet been characterized. Here, we investigated the structures of colloidal crystalline films and germanium replicas by scanning electron microscopy and small angle X-ray scattering. The structures of colloidal crystals made by evaporative assembly depends on the size of L-arginine-capped silica nanoparticles. Particles smaller than ~31 nm diameter assemble into non-close-packed arrangements (bcc) whereas particles larger than 31 nm assemble into random close-packed structures with disordered hexagonal phase. Polycrystalline films of these materials retain their structures and long-range order upon infiltration at high temperature and pressure, and the structure is preserved in Ge replicas. The shear force during deposition and dispersity of silica nanoparticles contributes to the size-based variation in the structure and to the size of crystal domains in the colloidal crystal films.

36 MATERIALS SCIENCE↗

Annealing induced microstructure engineering of antimony tri-selenide thin films

Highlights: • Deposition of Sb{sub 2}Se{sub 3} thin films using thermal vapour deposition. • Films are deposited on substrates with concurrent heating and without heating. • Effect of post deposition annealing on the two types of films are investigated. • Influence of temperature and processing conditions on optical band gap are probed. • This Sb{sub 2}Se{sub 3} films can find application in solar cells and optoelectronic devices. - Abstract: The presented work demonstrates the effect of annealing on the structural, surface morphology and optical properties of Antimony Triselenide (Sb{sub 2}Se{sub 3}) thin films deposited by thermal evaporation. Two sets of thin films of Sb{sub 2}Se{sub 3} were grown on soda lime glass (SLG) substrates by thermal evaporation with and without substrate heating. Both sets of films were then annealed at three distinct temperatures (100 °C, 200 °C and 300 °C) to study the effects of annealing on the microstructure. Analysis using XRD (X-Ray Diffraction) characterization revealed that the as-deposited films without substrate heating exhibit an amorphous nature, whereas the films grown with concurrent substrate heating are polycrystalline with orthorhombic structure. The films annealed at high temperature with concurrent substrate heating possess smooth and continuous grain morphologies. The effect of annealing was also found to have significant impact on the band gap and optical properties of the Sb{sub 2}Se{sub 3} thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Revealing the nanostructure of calcium phosphate coatings using HRTEM/FIB techniques

Herein, we report on the micro- and nanostructure of the calcium phosphate coating produced by pulsed laser deposition (PLD), using focused ion beam (FIB) lamella sample preparation and transmission electron microscopy (TEM) as the characterization technique. The initial selected area electron diffraction (SAED) data demonstrated the presence of hydroxyapatite (HA) over any other possible calcium phosphate crystalline structure and the polycrystalline nature of the coating. Moreover, the SAED analyses showed clear textured ring patterns coherent with the presence of a preferred orientation in the HA nano-crystal growth. The SAED data also indicated that the coating appears to be textured in the 〈002〉 crystalline direction. Dark-field images obtained using 002 as the working reflection showed a clear oriented crystal growth in columns, from bottom to top. These columns have a peculiar arrangement of nano-crystals since, in some cases, the preferred orientation appears to start at a certain distance from the substrate. Direct d-spacing measurements on high-resolution TEM images provided further proof of the presence of an HA nano-crystal structure. The reported data may be of interest in the future to adjust the microstructure of the HA coatings. - Highlights: •The FIB lift-out technique allows a very site-specific sample preparation method for HRTEM analysis. •It also permits a fast assessment of the HA coating thickness and elemental composition (EDS). •The coatings exhibit a nano-crystalline nature, with a texturing effect along the 002 planes. •PLD is suitable for the production of crystalline c-axis oriented hydroxyapatite coatings. •The crystalline HA phase in the PLD coating is very similar to the present in bone.

36 MATERIALS SCIENCE↗

Resonant photoemission study of multiferroic LuFe{sub 2}O{sub 4} across three-dimensional to two-dimensional charge ordering

Electronic structures modification of polycrystalline LuFe{sub 2}O{sub 4} across 3 dimensional to 2 dimensional charge ordering (CO) has been studied by resonance photoemission spectroscopy. Constant-initial-state spectra measured across 3p → 3d resonance energy indicate its charge transfer insulating behavior. Valance band spectra study shows states lying closer to the Fermi level are due to Fe{sup 2+} ions. As the temperature is varied from 3D to 2D CO state, a weight transfer of DOS from low binding energy to higher binding energy is observed which is attributed to the modification in the Fe-O hybridized states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and ionic conductivity of well-aligned polycrystalline sodium titanogallate grown by reactive diffusion

We prepared the b-axis-oriented polycrystalline Na{sub 0.85}Ti{sub 0.51}Ga{sub 4.37}O{sub 8} (NTGO) embedded in Ga{sub 2}O{sub 3}-doped Na{sub 2}Ti{sub 4}O{sub 9} matrix using the reactive diffusion technique. When the sandwich-type Ga{sub 2}TiO{sub 5}/NaGaO{sub 2}/Ga{sub 2}TiO{sub 5} diffusion couple was heated at 1323 K for 24 h, the NTGO polycrystal was readily formed in the presence of a liquid phase. The resulting polycrystalline material was characterized by X-ray diffractometry, electron microscopy and impedance spectroscopy. We mechanically processed the annealed diffusion couple and obtained the thin-plate electrolyte consisting mostly of the grain-aligned NTGO polycrystal. The ionic conductivity (σ) of the electrolyte along the common b-axis direction steadily increased from 1.3×10{sup −4} to 7.3×10{sup −3} S/cm as the temperature increased from 573 to 1073 K. There was a slope change at ca. 792 K for the Arrhenius plot of σ; the activation energies were 0.39 eV above this temperature and 0.57 eV below it. The NTGO showed the crystal structure (space group C2/m) with substantial positional disordering of one of the two Ga sites. The Na{sup +} ions occupied ca. 43% of the Wyckoff position 4i site, the deficiency of which would contribute to the relatively high ionic conductivity along the b-axis. The reactive diffusion could be widely applicable as the novel technique to the preparation of grain-aligned ceramics of multi-component systems. - Graphical abstract: We have prepared the b-axis-oriented Na{sub 0.85}Ti{sub 0.51}Ga{sub 4.37}O{sub 8} polycrystal embedded in Ga{sub 2}O{sub 3}-doped Na{sub 2}Ti{sub 4}O{sub 9} matrix by the heat treatment of sandwich-type diffusion couple of Ga{sub 2}TiO{sub 5}/NaGaO{sub 2}/Ga{sub 2}TiO{sub 5}. The resulting Na{sub 0.85}Ti{sub 0.51}Ga{sub 4.37}O{sub 8} electrolyte showed the ionic conductivity ranging from 1.3×10{sup −4} S/cm at 573 K to 7.3×10{sup −3} S/cm at 1073 K. - Highlights: • The b-axis-oriented polycrystalline Na{sub 0.85}Ti{sub 0.51}Ga{sub 4.37}O{sub 8} is successfully prepared. • Crystal structure of Na{sub 0.85}Ti{sub 0.51}Ga{sub 4.37}O{sub 8} is determined by single-crystal XRD. • The polycrystal shows relatively high Na{sup +} ion conductivity along the common b-axis. • Reactive diffusion is successfully used for the preparation of grain-aligned ceramics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Emerging hierarchical dislocation structures: Insights from scanning electron microscopy-electron backscatter diffraction in situ tensile testing and multifractal analysis

Understanding the evolution of dislocation structures during plastic deformation is critical for predicting the mechanical performance of metallic materials. In this work, we applied in situ scanning electron microscopy/electron backscatter diffraction tensile testing combined with multifractal (MF) analysis to assess deformation-induced dislocation structure evolution in solution-annealed 304 L stainless steel, both in its as-received and neutron-irradiated states (5.4 displacements per atom). The analysis of kernel average misorientation patterns revealed the formation of hierarchical dislocation arrangements that exhibit clear MF scaling behavior. Despite pronounced visual differences between nonirradiated and irradiated specimens—most notably, the appearance of dislocation channels after irradiation—the singularity spectra suggest that both conditions give rise to similar underlying hierarchical structures. MF analysis provides a quantitative measure of the spatial complexity and self-organization of dislocation patterns, highlighting the accelerated emergence and evolution of the dislocation structures in irradiated polycrystalline materials, as well as the limitation of their spatial extent. The findings indicate that irradiation not only modifies microstructure but also alters correlation-driven dislocation organization. More generally, they demonstrate that MF analysis is a powerful tool for probing mesoscale deformation mechanisms.

Dislocation structures↗

Development of FeNiMoB thin film materials for microfabricated magnetoelastic sensors

Metglas{sup TM} 2826MB foils of 25-30 {mu}m thickness with the composition of Fe{sub 40}Ni{sub 38}Mo{sub 4}B{sub 18} have been used for magnetoelastic sensors in various applications over many years. This work is directed at the investigation of {approx}3 {mu}m thick iron-nickel-molybdenum-boron (FeNiMoB) thin films that are intended for integrated microsystems. The films are deposited on Si substrate by co-sputtering of iron-nickel (FeNi), molybdenum (Mo), and boron (B) targets. The results show that dopants of Mo and B can significantly change the microstructure and magnetic properties of FeNi materials. When FeNi is doped with only Mo its crystal structure changes from polycrystalline to amorphous with the increase of dopant concentration; the transition point is found at about 10 at. % of Mo content. A significant change in anisotropic magnetic properties of FeNi is also observed as the Mo dopant level increases. The coercivity of FeNi films doped with Mo decreases to a value less than one third of the value without dopant. Doping the FeNi with B together with Mo considerably decreases the value of coercivity and the out-of-plane magnetic anisotropy properties, and it also greatly changes the microstructure of the material. In addition, doping B to FeNiMo remarkably reduces the remanence of the material. The film material that is fabricated using an optimized process is magnetically as soft as amorphous Metglas{sup TM} 2826MB with a coercivity of less than 40 Am{sup -1}. The findings of this study provide us a better understanding of the effects of the compositions and microstructure of FeNiMoB thin film materials on their magnetic properties.

36 MATERIALS SCIENCE↗

Influence of fluorine doped CdO thin films by an simplified spray pyrolysis technique using nebulizer

The Cadmium oxide (CdO) and Fluorine (F) doped CdO thin films were effectively synthesized on glass substrates for different F doping concentrations (2, 4, 6, 8 at.%) using nebulized spray pyrolysis technique. The XRD analysis showed that all the films were polycrystalline having cubic structure with (111) preferential orientation. It was seen from the SEM photographs that the doping causes remarkable changes in the surface morphology. EDAX analysis clearly confirmed that the presence of expected elements cadmium, oxygen and fluorine in the final product, in appropriate proportions. The electrical study showed that the minimum resistivity value of 1.9 × 10{sup −4} Ω cm with notable higher values of carrier concentration and mobility was achieved for 6 at.% of CdO:F film. Optical study exhibited that the band gap value of CdO film increases gradually with the increase in F-doping concentration, reaching maximum band gap value of 2.61 eV at 6 at.% and starts decreasing thereafter. Photoluminescence spectra depicted that the intensity of the emission peaks was significantly varied with doping concentrations. The high transparency, wide band gap energy, enhanced electrical properties and light sensitivity had been obtained infer that F-doped CdO thin films which find application in optoelectronic applications. Graphical abstract: .

36 MATERIALS SCIENCE↗

Fracture characteristics and heat treatment of laser powder bed fusion additively manufactured GRCop-84 copper

Laser Powder Bed Fusion (LPBF) of Glenn Research Copper 84 (GRCop-84), a Cr 2 Nb (8 at. % Cr, 4 at. % Nb) precipitation hardened alloy, produces a fully dense high conductivity alloy with a yield strength of 500 MPa and ultimate tensile strength (UTS) of 740 MPa, superior to other competing copper alloys, and 20% elongation at fracture for material stressed perpendicular to the build direction. The high thermal stability of the Cr 2 Nb precipitate in the copper matrix reduces coarsening and maintains a 300 MPa yield, 520 MPa UTS and 26% elongation after a 900 °C, 5-h heat treatment, while a 3 h 450 °C heat treatment increases yield to 810 MPa, UTS to 970 MPa with 9% elongation at fracture, for samples stressed perpendicular to the build direction. Tensile strength anisotropy based on print direction was attributed to internal stress and columnar grain formation. Void nucleation during tensile fracture was initiated by brittle fracture of precipitate particles within the copper matrix. Fracture cusps contain matching precipitate fragment geometry on opposing sides located near the cusp center in at least 80% of fracture cusps. An optimal precipitate size of 100 nm is predicted for maximum tensile strength from precipitates on fracture surfaces, while tensile testing with varying heat treatments shows maximum strength with 100 nm and smaller precipitates. Cr2Nb precipitates are shown to transition between polycrystalline and monocrystalline structures at high temperature.

36 MATERIALS SCIENCE↗

Operando Electrochemical Liquid-Cell Scanning Transmission Electron Microscopy (EC-STEM) Studies of Evolving Cu Nanocatalysts for CO 2 Electroreduction

The design and synthesis of nanocatalysts with well-defined sizes, compositions, and structures have revolutionized our accessibility to tunable catalyst activity and selectivity for a variety of energy-related electrochemical reactions. Nonetheless, establishing structure-(re)activity correlations requires the understanding of the dynamic evolution of pristine nanocatalysts and the identification of their active states under operating conditions. We previously communicated the operando observation of Cu nanocatalysts evolving into active metallic Cu nanograins for CO 2 electroreduction (Yang et al. Nature 2023, 614, 262–269). Here, we expand our discussion to the technical capabilities and further research applications of operando electrochemical liquid-cell scanning transmission electron microscopy (EC-STEM), which enables quantitative electrochemistry while tracking dynamic structural evolution of sub-10 nm Cu nanocatalysts. The coexistent H 2 bubbles, often disruptive to operando spectroscopy, are an effective approach to create a thin-liquid layer that significantly improves spatial resolution while remaining electrochemically accessible to Cu nanocatalysts. Operando four-dimensional (4D) STEM in liquids provides insights into the complex structure of active polycrystalline metallic Cu nanograins. With continuous technical developments, we anticipate that operando EC-STEM will evolve into a powerful electroanalytical method to advance our understanding of a variety of nanoscale electrocatalysts at solid/liquid interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Titanium nitride: A new Ohmic contact material for n-type CdS

In devices based on CdS, indium is often used to make Ohmic contacts. Since indium is scarce and expensive, suitable replacement materials need to be found. In this work, we show that sputtered titanium nitride forms an Ohmic contact with n-type CdS. The CdS films, deposited with chemical bath deposition, have a hexagonal crystal structure and are polycrystalline, mostly with a (002) texture. The thickness of the films is {approx}600 nm, and the donor density is 1.9 x 10{sup 16} cm{sup -3}. The donor density increases to 1.5 x 10{sup 17} cm{sup -3} upon annealing. The contact resistivity of sputtered TiN on CdS is found to be 4.7 {+-} 0.6 {Omega} cm{sup 2}. This value is sufficiently small to avoid large resistive losses in most CdS device applications. To demonstrate the use of TiN in a CdS device, a Au/CdS/TiN Schottky diode was constructed. The diode has a potential barrier of 0.69 V and an ideality factor of 2.2.

36 MATERIALS SCIENCE↗

Effect of ambient combinations of argon, oxygen, and hydrogen on the properties of DC magnetron sputtered indium tin oxide films

Sputtering has been well-developed industrially with singular ambient gases including neutral argon (Ar), oxygen (O{sub 2}), hydrogen (H{sub 2}) and nitrogen (N{sub 2}) to enhance the electrical and optical performances of indium tin oxide (ITO) films. Recent preliminary investigation into the use of combined ambient gases such as an Ar+O{sub 2}+H{sub 2} ambient mixture, which was suitable for producing high-quality (low sheet resistance and high optical transmittance) of ITO films. To build on this promising preliminary work and develop deeper insight into the effect of ambient atmospheres on ITO film growth, this study provides a more detailed investigation of the effects of ambient combinations of Ar, O{sub 2}, H{sub 2} on sputtered ITO films. Thin films of ITO were deposited on glass substrates by DC magnetron sputtering using three different ambient combinations: Ar, Ar+O{sub 2} and Ar+O{sub 2}+H{sub 2}. The structural, electrical and optical properties of the three ambient sputtered ITO films were systematically characterized by X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), Raman spectroscopy, four probe electrical conductivity and optical spectroscopy. The XRD and Raman studies confirmed the cubic indium oxide structure, which is polycrystalline at room temperature for all the samples. AFM shows the minimum surface roughness of 2.7 nm for Ar+O{sub 2}+H{sub 2} sputtered thin film material. The thickness of the films was determined by the cross sectional SEM analysis and its thickness was varied from 920 to 817 nm. The columnar growth of ITO films was also discussed here. The electrical and optical measurements of Ar+O{sub 2}+H{sub 2} ambient combinations shows a decreased sheet resistance (5.06 ohm/□) and increased optical transmittance (69%) than other samples. The refractive index and packing density of the films were projected using optical transmission spectrum. From the observed results the Ar+O{sub 2}+H{sub 2} ambient is a good choice to enhance the total optoelectronic properties of the ITO films. The improved electrical and optical properties of ITO films with respect to the Ar+O{sub 2}+H{sub 2} ambient sample were discussed in detail. In addition, the physical properties were also discussed with the influence of this ambient combination with respect to Ar, Ar+O{sub 2} and Ar+O{sub 2}+H{sub 2}.

36 MATERIALS SCIENCE↗

Infrared spectral studies of pre- and post-irradiated Li{sub 0.5(1+x)}Ti{sub x}Al{sub 0.1}Fe{sub 2.4-1.5x}O{sub 4} system

The consequences of 50 MeV Li{sup 3+} ions irradiation on the structural behaviour of polycrystalline samples of spinel ferrite system Li{sub 0.5(1+x)}Ti{sub x}Al{sub 0.1}Fe{sub 2.4-1.5x}O{sub 4} are investigated by using infrared absorption spectroscopy. The IR spectrum showed two main absorption bands ν{sub 1} and ν{sub 2} in the range 400-700 cm{sup −1} arising from tetrahedral and octahedral interstitial sites in the spinel lattice. The shifting and splitting observed in IR frequency bands ν{sub 1} and ν{sub 2} for tetrahedral and octahedral sites under irradiation effect are ascribed to redistribution of cations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal structure and electron density distribution of La{sub 1.9}Bi{sub 0.1}Mo{sub 2}O{sub 9-δ} fast oxide ion conductor

Structural property of polycrystalline La{sub 1.9}Bi{sub 0.1}Mo{sub 2}O{sub 9-δ} has been investigated. Rietveld refinement at room temperature of the material suggests single phase nature with cubic symmetry (space group P2{sub 1}3). The electron charge density contour map has been successfully obtained from Rietveld analysis. It has been found that oxygen ion migration is favourable for (210) plane than (63-1) and (110) planes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Composition-dependent structural and Raman spectroscopic studies on Y{sub 1-x}Ho{sub x}CrO{sub 3} (0≤x≤0.1)

In this paper we report the synthesis and structural characterization of polycrystalline holmium doped YCrO{sub 3} samples prepared by solid state reaction method. X-ray diffraction studies confirm the formation of single phase pure materials. Increasing Holmium substitution in Y{sub 1-x}Ho{sub x}CrO{sub 3} (0≤x≤0.1) allows a quasi-continuous tuning of the lattice in this multiferroic chromite without any magnetic interference effects of rare-earth ions. The composition dependent Raman scattering studies at room temperature reveal decreasing Raman mode frequencies with increasing holmium content consistent with the X-ray data. Decreasing phonon frequency shifts with increasing holmium content occurs, depending on the average rare-earth ion radius determined by the concentration of Y{sup +3} and Ho{sup +3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characteristic length scale dependence on conductivity for La{sub 2-x}Er{sub x}Mo{sub 2}O{sub 9} (0.05 ≤ x ≤ 0.3) oxide ion conductors

Structural property of polycrystalline La{sub 2-x}Er{sub x}Mo{sub 2}O{sub 9} has been investigated. Rietveld refinements at room temperature of the materials suggest a single phase nature with cubic symmetry (space group P2{sub 1}3). The electron density contour plot confirms the nature of different cation-oxygen bonds. Time dependent mean square displacement (√ ) and the spatial extent of the sub-diffusive motion (√ ) are evaluated using the linear response theory. The localized hop at O{sub 2} and O{sub 3} sites is found to be favorable for oxygen ion migration for these systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗