Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Parameter Estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Mesoscale informed parameter estimation through machine learning: A case-study in fracture modeling

Scale bridging is a critical need in computational sciences, where the modeling community has developed accurate physics models from first principles, of processes at lower length and time scales that influence the behavior at the higher scales of interest. However, it is not computationally feasible to incorporate all of the lower length scale physics directly into upscaled models. This is an area where machine learning has shown promise in building emulators of the lower length scale models, which incur a mere fraction of the computational cost of the original higher fidelity models. We demonstrate the use of machine learning using an example in materials science estimating continuum scale parameters by emulating, with uncertainties, complicated mesoscale physics. Additionally, we describe a new framework to emulate the fine scale physics, especially in the presence of microstructures, using machine learning, and showcase its usefulness by providing an example from modeling fracture propagation. Our approach can be thought of as a data-driven dimension reduction technique that yields probabilistic emulators. Our results show well-calibrated predictions for the quantities of interests in a low-strain simulation of fracture propagation at the mesoscale level. Furthermore, on average, we achieve ~10% relative errors on time-varying quantities like total damage and maximum stresses. Successfully replicating mesoscale scale physics within the continuum models is a crucial step towards predictive capability in multi-scale problems.

36 MATERIALS SCIENCE↗

BIASES AND UNCERTAINTIES IN PHYSICAL PARAMETER ESTIMATES OF LYMAN BREAK GALAXIES FROM BROADBAND PHOTOMETRY

We investigate the biases and uncertainties in estimates of physical parameters of high-redshift Lyman break galaxies (LBGs), such as stellar mass, mean stellar population age, and star formation rate (SFR), obtained from broadband photometry. These biases arise from the simplifying assumptions often used in fitting the spectral energy distributions (SEDs). By combining {lambda}CDM hierarchical structure formation theory, semianalytic treatments of baryonic physics, and stellar population synthesis models, we construct model galaxy catalogs from which we select LBGs at redshifts z {approx} 3.4, 4.0, and 5.0. The broadband photometric SEDs of these model LBGs are then analyzed by fitting galaxy template SEDs derived from stellar population synthesis models with smoothly declining SFRs. We compare the statistical properties of LBGs' physical parameters-such as stellar mass, SFR, and stellar population age-as derived from the best-fit galaxy templates with the intrinsic values from the semianalytic model. We find some trends in these distributions: first, when the redshift is known, SED-fitting methods reproduce the input distributions of LBGs' stellar masses relatively well, with a minor tendency to underestimate the masses overall, but with substantial scatter. Second, there are large systematic biases in the distributions of best-fit SFRs and mean ages, in the sense that single-component SED-fitting methods underestimate SFRs and overestimate ages. We attribute these trends to the different star formation histories predicted by the semianalytic models and assumed in the galaxy templates used in SED-fitting procedure, and to the fact that light from the current generation of star formation can hide older generations of stars. These biases, which arise from the SED-fitting procedure, can significantly affect inferences about galaxy evolution from broadband photometry.

79 ASTRONOMY AND ASTROPHYSICS↗

Parameter estimation in truss beams using Timoshenko beam model with damping

Truss beams with members having viscous damping are modeled with a Timoshenko beam. Procedures for deriving the equivalent bending rigidity, transverse shear rigidity, and damping are presented. Explicit expressions for these equivalent beam properties are obtained for a specific truss beam. The beam model thus established is then used to investigate the effect of damping in free vibration. Finally, the beam is employed in the estimation of structural parameters in a simply-supported truss beam using a random search algorithm.

Sun, C. T.↗

An investigation of surface parameter estimation from surface models

In surface scattering problems, scattering models are used to estimate the surface parameters by comparing model predictions to data. The meaning of such a procedure is examined using computer simulated scattering data from statistically known surfaces. Numerically exact scattering computations based on the moment method are conducted, and standard surface scattering models are applied to these simulated data. It is shown that such an approach usually leads to effective surface parameters as opposed to real surface parameters, except for a limited frequency region. It is also shown that if a surface scattering model is valid over all frequencies, then it is possible to recover the real surface parameters regardless of whether the surface is single scale or two scale.

Fung, A. K.↗

Predictive modeling of a subcritical pulverized-coal power plant for optimization: Parameter estimation, validation, and application

As renewable power generation deployment increases, fossil fuel plants are increasingly required to operate more flexibly. Many coal-fired power plants were originally designed to operate at base load and do not operate optimally at partial load. Predictive first-principles plant-wide models can be employed to identify opportunities for flexibility improvements and diagnose low-load operating issues. This paper describes the application of the Institute for the Design of Advanced Energy Systems Integrated Platform (IDAES) to model and optimize flexible power plant operations. The key benefits of using IDAES are that it provides an open-source, fully equation-oriented modeling framework for efficient modular model construction, reuse, and customization, together with a mathematical optimization framework leveraging powerful, state-of-the-art solvers. The process systems engineering workflow from predictive process simulation to parameter estimation, model validation, and plant optimization is applicable to a variety of existing and next-generation energy systems as well as other chemical and environmental processes. Here, to demonstrate this capability, a physics-based, steady-state model was developed to improve full- and part-load performance of the Escalante Generating Station, a 245 MWe (net) subcritical pulverized coal-fired power plant owned and operated by Tri-State Generation and Transmission Association. Specifically, sixty-nine model parameters were simultaneously estimated from several months of operating data enabling prediction of flow rates, temperatures, pressures, and steam quality throughout the plant. The validated model was leveraged by Escalante to reduce the minimum operating load from 90 MW to 50 MW by diagnosing a low-load water-hammer issue, enabling coal usage and emissions reductions during periods of low power demand. Additionally, opportunities for heat rate reduction (i.e., efficiency improvement) through a steeper sliding-pressure approach to load-following and optimization of other boiler operating variables were also identified and quantified. For example, a potential efficiency improvement of 0.7 percentage points was observed at half-load operation.

01 COAL, LIGNITE, AND PEAT↗

Statistical coverage for supersymmetric parameter estimation: a case study with direct detection of dark matter

Models of weak-scale supersymmetry offer viable dark matter (DM) candidates. Their parameter spaces are however rather large and complex, such that pinning down the actual parameter values from experimental data can depend strongly on the employed statistical framework and scanning algorithm. In frequentist parameter estimation, a central requirement for properly constructed confidence intervals is that they cover true parameter values, preferably at exactly the stated confidence level when experiments are repeated infinitely many times. Since most widely-used scanning techniques are optimised for Bayesian statistics, one needs to assess their abilities in providing correct confidence intervals in terms of the statistical coverage. Here we investigate this for the Constrained Minimal Supersymmetric Standard Model (CMSSM) when only constrained by data from direct searches for dark matter. We construct confidence intervals from one-dimensional profile likelihoods and study the coverage by generating several pseudo-experiments for a few benchmark sets of pseudo-true parameters. We use nested sampling to scan the parameter space and evaluate the coverage for the benchmarks when either flat or logarithmic priors are imposed on gaugino and scalar mass parameters. The sampling algorithm has been used in the configuration usually adopted for exploration of the Bayesian posterior. We observe both under- and over-coverage, which in some cases vary quite dramatically when benchmarks or priors are modified. We show how most of the variation can be explained as the impact of explicit priors as well as sampling effects, where the latter are indirectly imposed by physicality conditions. For comparison, we also evaluate the coverage for Bayesian credible intervals, and observe significant under-coverage in those cases.

79 ASTRONOMY AND ASTROPHYSICS↗

Parameter estimation in linear models of the human operator in a closed loop with application of deterministic test signals

Parameter estimation techniques are discussed with emphasis on unbiased estimates in the presence of noise. A distinction between open and closed loop systems is made. A method is given based on the application of external forcing functions consisting of a sun of sinusoids; this method is thus based on the estimation of Fourier coefficients and is applicable for models with poles and zeros in open and closed loop systems.

Vanlunteren, A.↗

Optimal input design for aircraft parameter estimation using dynamic programming principles

A new technique was developed for designing optimal flight test inputs for aircraft parameter estimation experiments. The principles of dynamic programming were used for the design in the time domain. This approach made it possible to include realistic practical constraints on the input and output variables. A description of the new approach is presented, followed by an example for a multiple input linear model describing the lateral dynamics of a fighter aircraft. The optimal input designs produced by the new technique demonstrated improved quality and expanded capability relative to the conventional multiple input design method.

Klein, Vladislav↗

Optimal Input Design for Aircraft Parameter Estimation using Dynamic Programming Principles

A new technique was developed for designing optimal flight test inputs for aircraft parameter estimation experiments. The principles of dynamic programming were used for the design in the time domain. This approach made it possible to include realistic practical constraints on the input and output variables. A description of the new approach is presented, followed by an example for a multiple input linear model describing the lateral dynamics of a fighter aircraft. The optimal input designs produced by the new technique demonstrated improved quality and expanded capability relative to the conventional multiple input design method.

Morelli, Eugene A.↗

CATASTROPHIC PHOTO-z ERRORS AND THE DARK ENERGY PARAMETER ESTIMATES WITH COSMIC SHEAR

We study the impact of catastrophic errors occurring in the photometric redshifts of galaxies on cosmological parameter estimates with cosmic shear tomography. We consider a fiducial survey with nine-filter set and perform photo-z measurement simulations. It is found that a fraction of 1% galaxies at z{sub spec} {approx} 0.4 is misidentified to be at z{sub phot} {approx} 3.5. We then employ both {chi}{sup 2} fitting method and the extension of Fisher matrix formalism to evaluate the bias on the equation of state parameters of dark energy, w {sub 0} and w {sub a} , induced by those catastrophic outliers. By comparing the results from both methods, we verify that the estimation of w{sub 0} and w{sub a} from the fiducial five-bin tomographic analyses can be significantly biased. To minimize the impact of this bias, two strategies can be followed: (1) the cosmic shear analysis is restricted to 0.5 < z < 2.5, where catastrophic redshift errors are expected to be insignificant; (2) a spectroscopic survey is conducted for galaxies with 3 < z{sub phot} < 4. We find that the number of spectroscopic redshifts needed scales as N{sub spec} {proportional_to} f{sub cata} x A, where f{sub cata} = 1% is the fraction of catastrophic redshift errors (assuming a nine-filter photometric survey) and A is the survey area. For A = 1000deg{sup 2}, we find that N{sub spec} > 320 and 860, respectively, in order to reduce the joint bias in (w{sub 0}, w{sub a} ) to be smaller than 2{sigma} and 1{sigma}. This spectroscopic survey (option 2) will improve the figure of merit of option 1 by a factor x1.5 thus making such a survey strongly desirable.

79 ASTRONOMY AND ASTROPHYSICS↗

Analytical solution and parameter estimation for heat of wetting and vapor adsorption during spontaneous imbibition in tuff

An analytical expression is derived for the thermal response observed during spontaneous imbibition of water into a dry core of zeolitic tuff. Sample tortuosity, thermal conductivity, and thermal source strength are estimated from fitting an analytical solution to temperature observations during a single laboratory test. Here, the closed-form analytical solution is derived using Green's functions for heat conduction in the limit of “slow” water movement; that is, when advection of thermal energy with the wetting front is negligible. The solution has four free fitting parameters and is efficient for parameter estimation. Laboratory imbibition data used to constrain the model include a time series of the mass of water imbibed, visual location of the wetting front through time, and temperature time series at six locations. The thermal front reached the end of the core hours before the visible wetting front. Thus, the predominant form of heating during imbibition in this zeolitic tuff is due to vapor adsorption in dry zeolitic rock ahead of the wetting front. The separation of the wetting front and thermal front in this zeolitic tuff is significant, compared to wetting front behavior of most materials reported in the literature. This work is the first interpretation of a thermal imbibition response to estimate transport (tortuosity) and thermal properties (including thermal conductivity) from a single laboratory test.

36 MATERIALS SCIENCE↗

User's manual for MMLE3, a general FORTRAN program for maximum likelihood parameter estimation

A user's manual for the FORTRAN IV computer program MMLE3 is described. It is a maximum likelihood parameter estimation program capable of handling general bilinear dynamic equations of arbitrary order with measurement noise and/or state noise (process noise). The theory and use of the program is described. The basic MMLE3 program is quite general and, therefore, applicable to a wide variety of problems. The basic program can interact with a set of user written problem specific routines to simplify the use of the program on specific systems. A set of user routines for the aircraft stability and control derivative estimation problem is provided with the program.

Maine, R. E.↗

Parameter estimation in a thermoelastic composite problem via adjoint formulation and model reduction

Advances in nondestructive material characterization are providing a wealth of information that could be exploited to gain insight into general aspects of material performance and, in particular, discover relationships between microstructure and thermo-mechanical properties in polycrystalline and other complex composite materials. Here, in order to facilitate the integration of such measurements into existing models, as well as inform new physics-based predictions, we developed a C++/MPI computational framework for sensitivity analysis and parameter estimation. The framework utilizes a micro-mechanical modeling based on fast Fourier transforms, direct and adjoint formulations, and Markov chain Monte Carlo sampling techniques. We illustrate the characteristics of this framework and demonstrate its utility by computing the residual stresses arising from thermal expansion of an elastic composite and using data from simulated experiments. Lastly, we show that the availability of nondestructive 3-D measurements is crucial to reduce the uncertainty in predictions, emphasizing the importance of an integrated experimental/modeling/data analysis approach for improved material characterization and design.

36 MATERIALS SCIENCE↗

Multi-Variable Model-Based Parameter Estimation Model for Antenna Radiation Pattern Prediction

A new procedure is presented to develop multi-variable model-based parameter estimation (MBPE) model to predict far field intensity of antenna. By performing MBPE model development procedure on a single variable at a time, the present method requires solution of smaller size matrices. The utility of the present method is demonstrated by determining far field intensity due to a dipole antenna over a frequency range of 100-1000 MHz and elevation angle range of 0-90 degrees.

Deshpande, Manohar D.↗

Higher order corrections to the primordial gravitational wave spectrum and its impact on parameter estimates for inflation

We study the impact of the use of the power series expression for the primordial tensor spectrum on parameter estimation from future direct detection gravitational wave experiments. The spectrum approximated by the power series expansion may give large deviation from the true (fiducial) value when it is normalized at CMB scale because of the large separation between CMB and direct detection scales. We derive the coefficients of the higher order terms of the expansion up to the sixth order within the framework of the slow-roll approximation and investigate how well the inclusion of higher order terms improves the analytic prediction of the spectrum amplitude by comparing with numerical results. Using the power series expression, we consider future constraints on inflationary parameters expected from direct detection experiments of the inflationary gravitational wave background and show that the truncation of the higher order terms can lead to incorrect evaluation of the parameters. We present two example models; a quadratic chaotic inflation model and mixed inflaton and curvaton model with a quartic inflaton potential.

79 ASTRONOMY AND ASTROPHYSICS↗

Parameter estimation by implicit sampling

© 2015 Mathematical Sciences Publishers. Implicit sampling is a weighted sampling method that is used in data assimilation to sequentially update state estimates of a stochastic model based on noisy and incomplete data. Here we apply implicit sampling to sample the posterior probability density of parameter estimation problems. The posterior probability combines prior information about the parameter with information from a numerical model, e.g., a partial differential equation (PDE), and noisy data. The result of our computations are parameters that lead to simulations that are compatible with the data. We demonstrate the usefulness of our implicit sampling algorithm with an example from subsurface flow. For an efficient implementation, we make use of multiple grids, BFGS optimization coupled to adjoint equations, and Karhunen-Loève expansions for dimensional reduction. Several difficulties of Markov chain Monte Carlo methods, e.g., estimation of burn-in times or correlations among the samples, are avoided because the implicit samples are independent.

Morzfeld, Matthias↗

Dynamic Modeling, Parameter Estimation, and Data Reconciliation of a Supercritical Pulverized Coal-Fired Boiler

A high-fidelity, spatially distributed dynamic model of a supercritical pulverized coal-fired boiler was developed for calculating transient thermal profiles of the boiler tubes, which are often not measured or unmeasurable in industrial settings due to the harsh operating conditions. In this work, rigorous models of the subcritical and supercritical steam properties, which can be highly nonlinear, were used to capture the transition between two-phase and one-phase flow, respectively, as supercritical boilers frequently transition through the critical point during load-following operation. The transient boiler model was also used for data reconciliation and parameter estimation for the purpose of model validation against industrial data. An approach was developed to reduce the size of large-scale reconciliation problem by focusing on the implementation of bias terms for the reconciled variables, which can be estimated in place of the reconciled variables themselves. In addition, a functional approximation of the reconciliation problem was defined so that it can be more simply optimized. Combining this functional approximation optimization with reformulation of the reconciliation problem considering measurement biases can significantly improve the tractability of many such large-scale problems. The validated boiler model was then used to study transient responses under load-following operation with specific attention on the calculation of unmeasurable variables.

42 ENGINEERING↗

Doppler parameter estimation for spaceborne synthetic-aperture radars

Problems in the determination of Doppler parameters for spaceborne synthetic-aperture radar (SAR) data processing are examined. The degradations in image quality due to errors in these parameters are summarized. It is shown that these parameters can be estimated using accurate spacecraft ancillary data. In cases where such data are not available, two techniques are proposed to estimate these parameters using the coherent radar return. These techniques were tested with the Seasat SAR data and the test results demonstrate that the accuracies achieved exceed the system performance requirements. Possible applications of these techniques in other areas of SAR data utilization are briefly discussed.

Li, F.-K.↗