Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASTICS INDUSTRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Toward polymer upcycling—adding value and tackling circularity

Plastics have revolutionized modern life, but have created a global waste crisis driven by our reliance and demand for low-cost, disposable materials. New approaches are vital to address challenges related to plastics waste heterogeneity, along with the property reductions induced by mechanical recycling. Chemical recycling and upcycling of polymers may enable circularity through separation strategies, chemistries that promote closed-loop recycling inherent to macromolecular design, and transformative processes that shift the life-cycle landscape. Polymer upcycling schemes may enable lower-energy pathways and minimal environmental impacts compared with traditional mechanical and chemical recycling. The emergence of industrial adoption of recycling and upcycling approaches is encouraging, solidifying the critical role for these strategies in addressing the fate of plastics and driving advances in next-generation materials design.

Korley, LaShanda T. J.↗

Development of a Fatigue Crack Growth Coupon for Highly Plastic Stress Conditions

This paper presents an analytical approach used to develop a novel fatigue crack growth coupon for a highly plastic 3-D stress field condition. The flight hardware investigated in this paper is a large separation bolt that fractures using pyrotechnics at the appointed time during the flight sequence. The separation bolt has a deep notch that produces a severe stress concentration and a large plastic zone when highly loaded. For this geometry, linear-elastic fracture mechanics (LEFM) techniques are not valid due to the large nonlinear stress field. Unfortunately, industry codes that are generally available for fracture mechanics analysis and fatigue crack growth (e.g. NASGRO (11) are limited to LEFM and are available for only a limited number of geometries. The results of LEFM based codes are questionable when used on geometries with significant plasticity. Therefore elastic-plastic fracture mechanics (EPFM) techniques using the finite element method (FEM) were used to analyze the bolt and test coupons. scale flight hardware is very costly in t e r n of assets, laboratory resources, and schedule. Therefore to alleviate some of these problems, a series of novel test coupons were developed to simulate the elastic-plastic stress field present in the bolt.

Allen, Phillip A.↗

Hybrid Chemo-Mechanical Plastics Recycling: Solvent-free, High-speed Reactive Extrusion of Low-Density Polyethylene

Low-Density Polyethylene (LDPE) is ubiquitous in the packaging industry due to its flexibility, toughness, and low cost. However, it is typically contaminated with other materials, seriously limiting options for mechanical recycling. Interest in chemical recycling techniques such as pyrolysis and hydrothermal liquefaction is growing, but most of these processes face technoeconomic challenges that have limited commercial deployment. We present a hybrid chemo-mechanical approach using reactive twin-screw extrusion (TSE) for tailoring the molecular weight and chain structure of reclaimed LDPE. Two types of zeolite catalysts at several loading levels were evaluated over a range of processing conditions. Structural, thermal, and rheological properties of the extruded samples were investigated and compared to virgin LDPE and LDPE extruded without the catalyst. A nuclear magnetic resonance spectroscopic technique was used to investigate changes in the structure of the polymer. LDPE extruded with microporous y-zeolite showed lower degradation temperature and increased short chain branching. Mesoporous MCM-41 also induced increased branching but had no effect on degradation temperature. The theoretical mechanical energy input for the chemical modification was calculated using process modeling. The demonstrated hybrid reactive extrusion process provides a potential low-cost, simple approach for repurposing LDPE-based flexible packaging as coatings and adhesives.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interaction of gas molecules with crystalline polymer separation membranes: Atomic-scale modeling and first-principles calculations

Carbon dioxide (CO2)-induced plasticization can significantly decrease the gas separation performance of membranes in high-temperature or high pressure conditions, such as industrial methane (CH4) separations. In this paper, we investigated the crystalline phase of three polymers (polybenzimidazole (PBI), Bis(isobutylcarboxy)polybenzimidazole (PBI-Butyl), and KaptonTM) and interactions between gas molecules (CO2 and N2) and these polymers. A novel, molecular dynamics (MD) based, computational technique was employed to find unknown crystalline structures of these polymer materials. The interaction of CO2 and N2 gases with these crystals was studied by first-principles calculations and by classical MD simulations. The results showed that the packing structure and the interlayer coupling in polymer crystals determine the permeability and diffusivity of gas molecules. This methodology also allows prediction of plastic swelling in these materials caused by gas molecules absorbed in the polymer matrix.

03 NATURAL GAS↗

A tough and sustainable fiber-forming material from lignin and waste poly(ethylene terephthalate)

In this report we describe repurposing of recycled polyesters as a matrix for lignin-a biorefinery coproduct that is used as a solid fuel and needs to find higher value-to make sustainable high-performance thermoplastic materials. Brittle lignin oligomers, isolated from plant biomass, require a low-melting host polymer matrix to form a rigid and tough renewable material. We demonstrate controlled lignin dispersion and interfacial interactions in softened recycled polyethylene terephthalate (PET) using a simple solvent-free, melt-blending technique. To avoid lignin degradation and devolatilization during melt processing, it was thermally treated. Tall oil fatty acid was used to enable PET processability at low enough temperature to accommodate lignin without charring. Chemical analysis reveals reduction of aliphatic hydroxyl content from 2 mmol g –1 to 1.63 mmol g –1 and an increase of total phenolic hydroxyl moieties from 5.86 to 6.64 mmol g –1 and cleavage of β-O-4 ether linkages due to thermal treatment. Structural transformation of lignin macromolecules during heat treatment was further confirmed by an increase in molar mass and improved thermal stability. Interfacial interactions between lignin and PET were assessed from mechanical properties and thermal analyses. Thermal treatment not only helps to improve the stability of lignin but also slightly reduces the size of the dispersed lignin domains via favored interfacial interactions with the PET matrix. These methods improve mechanical properties of the material. Further, incorporation of lignin in the plasticized PET matrix increases the ductility in the blended products. Here, the method we discuss here utilizes industrial wastes and co-products, and it does not require solvent or toxic chemicals during the reactive extrusion process that yields complete conversion to products.

36 MATERIALS SCIENCE↗

Catalytic amino acid production from biomass-derived intermediates

Amino acids are the building blocks for protein biosynthesis and find use in myriad industrial applications including in food for humans, in animal feed, and as precursors for bio-based plastics, among others. However, the development of efficient chemical methods to convert abundant and renewable feedstocks into amino acids has been largely unsuccessful to date. To that end, here we report a heterogeneous catalyst that directly transforms lignocellulosic biomass-derived a-hydroxyl acids into a-amino acids, including alanine, leucine, valine, aspartic acid, and phenylalanine in high yields. The reaction follows a dehydrogenation-reductive amination pathway, with dehydrogenation as the rate-determining step. Ruthenium nanoparticles supported on carbon nanotubes (Ru/CNT) exhibit exceptional efficiency compared with catalysts based on other metals, due to the unique, reversible enhancement effect of NH 3 on Ru in dehydrogenation. Based on the catalytic system, a two-step chemical process was designed to convert glucose into alanine in 43% yield, comparable with the well-established microbial cultivation process, and therefore, the present strategy enables a route for the production of amino acids from renewable feedstocks. Moreover, a conceptual process design employing membrane distillation to facilitate product purification is proposed and validated. Overall, this study offers a rapid and potentially more efficient chemical method to produce amino acids from woody biomass components.

09 BIOMASS FUELS↗

Gates Precast Concrete User Project Phase 1

The primary objective of the project was to demonstrate the viability of using carbon fiber reinforced ABS plastic and the Big Area Additive Manufacturing (BAAM) technology to rapidly manufacture molds for the precast concrete industry.

36 MATERIALS SCIENCE↗

A Hybrid AI/ML and Computational Mechanics Based Approach for Time-Series State and Fatigue Life Estimation of Nuclear Reactor Components

Environmental fatigue modeling is a complex problem due to multiple failure modes and their intermixing. The failure modes are function of various underlying causes in addition to the corrosive effect of reactor coolant environment. Some of the major causes are time-dependence of material associated with cyclic loading, load sequence effect associated with random/variable amplitude loading, effect of strain amplitude and rates, effect of varying temperature (along both temporal and spatial directions) and the effect of mean strain and stress. The nonlinear intermixing of failure modes associated with above mentioned causing parameters makes the environmental fatigue modeling is a challenging task. Because of this challenge, fatigue is traditionally being modeled based on experimental data. However, test based empirical approach often requires hundreds of fatigue tests to model the above-mentioned intermixing failure causes even for a single material system. The problem is further exaggerated for reactor component made from multi-material systems such as made from both carbon and stainless-steel base metals and their similar and dissimilar metal welds. With the difficulty of conducting hundreds of fatigue tests to capture the above-mentioned intermixing failure causes, fatigue modeling approaches often depends on empirical models based on limited available test data such as available through ASME code and NUREG 6909. However, these limited test-data-based models may not be enough to accurately predict the life of reactor components. Accurate prediction of life of reactor component would become a necessity, particularly when the license of the reactors to be extended for long-term-operation (LTO) that is for well beyond its original design life of 40 years. The requirement of extending the license of reactor under LTO requires hundreds of fatigue tests to be conducted to understand the mechanism associated with the above-mentioned interdependent failure causes. However, conducting large number of fatigue tests is not a feasibility due to the cost involved. To address this issues Argonne National Laboratory (ANL) with the sponsorship of DOE Light Water Reactor Sustainability (LWRS) program trying to develop a hybrid predictive modeling approach. This is based on limited experiment-data, Artificial-intelligence (AI) – Machine-Learning (ML) - Deep-Learning (DL) based techniques and Multiphysics-computational-mechanics based modeling tools. The hybrid approach not-only can improve the accuracy of the existing stress analysis and fatigue modeling approach but also can reduce the over-dependency on test-based approach. Towards this goal following are some of the major contributions based on ANL’s FY-20 environmental fatigue modeling activities: 1) A cyclic plasticity material model database for 82/182 dissimilar metal weld, which can be readily shared with US nuclear industry and regulatory agency on request. 2) A well validated analytical modeling methodology to perform cycle-by-cycle stress prediction under both constant amplitude fatigue loading and variable amplitude fatigue loading (with load-sequence effect). 3) An AI/ML/DL based methodology to predict unmeasurable cyclic strain based on other available sensor signals. This type of approach can be used for estimating strain in real reactor components from other sensor readings. 4) An AI/ML based approach to improve the US capability on environmental fatigue testing. This is by improving ANL’s existing environmental fatigue testing capacity to conduct ASME required strain-controlled tests (by controlling strain amplitudes and its rate), while not measuring the strain (due to the difficulty of placing an extensometer in a narrow autoclave in a PWR-water-test system). 5) A simulation and experiment based probabilistic modeling methodology for time-series fatigue state and life estimation of reactor metal such as dissimilar metal weld.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Synthesis of frameworks under multilevel performance constraints

A method for the minimum weight design of practical planar frameworks under both service and ultimate loading conditions is presented. Acceptable elastic stresses and displacements are ensured at the service load level while, simultaneously, adequate safety against plastic collapse is ensured at the ultimate load level. The features of the design method for an industrial steel mill building are illustrated.

Grierson, D. E.↗

Advanced Welding Tool

Accutron Tool & Instrument Co.'s welder was originally developed as a tool specifically for joining parts made of plastic or composite materials in any atmosphere to include the airless environment of space. Developers decided on induction or magnetic heating to avoid causing deformation and it also can be used with almost any type of thermoplastic material. Induction coil transfers magnetic flux through the plastic to a metal screen that is sandwiched between the sheets of plastic to be joined. When welder is energized, alternating current produces inductive heating on the screen causing the adjacent plastic surfaces to melt and flow into the mesh, creating a bond on the total surface area. Dave Brown, owner of Great Falls Canoe and Kayak Repair, Vienna, VA, uses a special repair technique based on operation of the Induction Toroid Welder to fix canoes. Whitewater canoeing poses the problem of frequent gashes that are difficult to repair. The main reason is that many canoes are made of plastics. The commercial Induction model is a self-contained, portable welding gun with a switch on the handle to regulate the temperature of the plastic melting screen. Welder has a broad range of applications in the automobile, appliance, aerospace and construction industries.

Source record↗

Method for Forming Hollow Profile Non-Circular Extrusions Using Shear Assisted Processing and Extrusion (ShAPE)

A process for forming extruded products using a device having a scroll face configured to apply a rotational shearing force and an axial extrusion force to the same preselected location on material wherein a combination of the rotational shearing force and the axial extrusion force upon the same location cause a portion of the material to plasticize, flow and recombine in desired configurations. This process provides for a significant number of advantages and industrial applications, including but not limited to extruding tubes used for vehicle components with 50 to 100 percent greater ductility and energy absorption over conventional extrusion technologies, while dramatically reducing manufacturing costs.

Joshi, Vineet V.↗

Design and Operation of a Multi-Bed Catalytic Micro-Reactor for the Study of Co-Processing of Bio-Oils with VGO

An industry wide shift from fossil-based fuel to renewable fuel sources including biomass, municipal waste, and plastics will require new process monitoring methods to minimize transitional risks including off specification product formation and catalyst deactivation. This project aims to provide a machine learning based process monitoring tool composed of online, slipstream mass spectra for use in biomass refineries and co-processing in existing refineries allowing operators to monitor product qualities and adjust process conditions accordingly. In order to maximize the robustness of the tool, large volumes of data must be collected to fine tune model parameters which consists of both micro and pilot scale mass spectral data. Micro-scale data is collected with a multi-tube micro-reactor housing up to six catalysts in horizontal beds, coupled with a molecular beam mass spectrometer. A pyrolizer equipped with an auto-sampler streamlines the micro-scale data collection process. This type of pyrolizer/micro-reactor configuration does not exist on the market, and therefore had to be created for the purposes of this project. The design and commissioning of this reactor will be presented in detail. This reactor set-up is highly flexible and increases throughput of analysis. For catalyst testing, each bed can be individually selected simply by turning valves. For catalyst reduction and regeneration, simultaneous flow through all six beds is used. The reproducibility of the system was first assessed with whole biomass pyrolysis along with pyrolysis of calibration standards. Initial work on this system evaluated two FCC catalysts, equilibrium catalyst (E-cat), and a proprietary catalyst from Johnson Matthey specifically design for co-processing of bio-oil with vacuum gas oil (VGO). This work used model compounds and VGO which illuminated differences in products produced by the catalysts.

biomass↗

Method for forming hollow profile non-circular extrusions using shear assisted processing and extrusion (ShAPE)

A process for forming extruded products using a device having a scroll face configured to apply a rotational shearing force and an axial extrusion force to the same preselected location on material wherein a combination of the rotational shearing force and the axial extrusion force upon the same location cause a portion of the material to plasticize, flow and recombine in desired configurations. This process provides for a significant number of advantages and industrial applications, including but not limited to extruding tubes used for vehicle components with 50 to 100 percent greater ductility and energy absorption over conventional extrusion technologies, while dramatically reducing manufacturing costs.

Joshi, Vineet V.↗

Production patterns of packaging waste categories generated at typical Mediterranean residential building worksites

Highlights: • On-site segregation level: 1.80%; training and motivation strategies were not effective. • 70% Cardboard waste: from switches and sockets during the building services stage. • 40% Plastic waste: generated during structures and partition works due to palletizing. • >50% Wood packaging waste, basically pallets, generated during the envelope works. - Abstract: The construction sector is responsible for around 28% of the total waste volume generated in Europe, which exceeds the amount of household waste. This has led to an increase of different research studies focusing on construction waste quantification. However, within the research studies made, packaging waste has been analyzed to a limited extent. This article focuses on the packaging waste stream generated in the construction sector. To this purpose current on-site waste packaging management has been assessed by monitoring ten Mediterranean residential building works. The findings of the experimental data collection revealed that the incentive measures implemented by the construction company to improve on-site waste sorting failed to achieve the intended purpose, showing low segregation ratios. Subsequently, through an analytical study the generation patterns for packaging waste are established, leading to the identification of the prevailing kinds of packaging and the products responsible for their generation. Results indicate that plastic waste generation maintains a constant trend throughout the whole construction process, while cardboard becomes predominant towards the end of the construction works with switches and sockets from the electricity stage. Understanding the production patterns of packaging waste will be beneficial for adapting waste management strategies to the identified patterns for the specific nature of packaging waste within the context of construction worksites.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Accounting for Sustainability and Performance: Contrasting Effects of PET-Derived Modifiers on Asphalt Durability

The valorization of waste plastics in roadway infrastructure requires careful balance between sustainability and performance, as ineffective modifiers may incur both environmental and financial costs. This study shows that two modifiers derived from the same waste plastic source (PET)-DOTP (N1,N4-(dioctyl)terephthalamide) and HETP (N1,N4-Bis(2-hydroxyethyl)terephthalamide)-exhibit opposite effects on asphalt properties, despite having nearly the same carbon footprint. DOTP improves elastic recovery in multiple creep recovery tests (MCRT), while HETP increases strain accumulation and reduces elasticity. Density functional theory (DFT) shows that DOTP's molecular structure can disperse well in bitumen mixtures by binding to both polar and non-polar components. In contrast, HETP binds only to the binder's polar sites, lacking adequate dispersion. This increases the risk of aggregation of polar compounds in the bitumen mixture, resulting in a more deformation-prone binder. A techno-economic analysis highlights trade-offs between sustainability and performance in industrial-scale synthesis. This study advocates for applying first-principles thinking in material design, coupled with experimental validation, to engineer plastic waste-derived additives that achieve both performance and sustainability goals.

36 MATERIALS SCIENCE↗

Thermochemical conversion of waste plastics with coal and biomass to generate value-added products

Co-gasification of waste plastic and waste coal/biomass in steam was investigated to evaluate the effects of operating conditions and low-cost catalyst compositions of coal ash on syngas production and tar mitigation. The results demonstrate the benefits of waste plastic conversion with coal or biomass. A better understanding of these processes will facilitate the development of more accurate kinetic models for industrial-scale chemical recycling.

co-gasification↗

Optimization of Pineapple Leaf Fibre Extraction Methods and Their Biodegradabilities for Soil Cover Application

Cellulosic natural fibres from pineapple leaves are considered as a green alternative to the conventional polyethylene (PE) soil cover in agro-industry. The use of pineapple leaf fibres (PALFs) soil cover can overcome the disposal problem of the conventional plastic covers which take hundreds of years to degrade. This research was undertaken to study the effectiveness methods of extracting the PALFs. The mechanical method utilized ‘roller and bladder system’, where the chemical method involved the extraction with 6% NaOH, 20% aqueous acetone, and pineapple juice solution. The semi-mechanical method was a combination of “roller and bladder” system and a chemical retting process using 6% NaOH alkaline solutions. The characteristics of the extracted fibers were determined using X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Kappa number test of the fibres extracted with semi-mechanical method showed the lowest percentage of lignin (3.39%). Based on XRD results, the highest percentage of crystallinity was recorded when PALF was extracted using the semi-mechanical method. A remarkable change on the morphological surface the biodegraded PALF soil cover was observed after 90 days of soil burial test. Biodegradability of soil cover made from PALF was higher than the commercial degradable soil cover i.e. PE/starch (80 wt% PE/ 20 wt% starch). Meanwhile, the growing rate and the soil fertility of chili tree that used PALFs soil cover showed better results than the chili tree that used conventional PE/starch soil cover.

36 MATERIALS SCIENCE↗

Cadmium - A metallohormone?

Cadmium is a heavy metal that is often referred to as the metal of the 20th century. It is widely used in industry principally in galvanizing and electroplating, in batteries, in electrical conductors, in the manufacture of alloys, pigments, and plastics, and in the stabilization of phosphate fertilizers. As a byproduct of smelters, cadmium is a prevalent environmental contaminant. In the general population, exposure to cadmium occurs primarily through dietary sources, cigarette smoking, and, to a lesser degree, drinking water. Although the metal has no known physiological function, there is evidence to suggest that the cadmium is a potent metallohormone. This review summarizes the increasing evidence that cadmium mimics the function of steroid hormones, addresses our current understanding of the mechanism by which cadmium functions as a hormone, and discusses its potential role in development of the hormone dependent cancers.

60 APPLIED LIFE SCIENCES↗