Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PITCHES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Visual field influence on manual roll and pitch stabilization

Human control performance in nulling perceived tilt angles was investigated for combinations of pseudo-random vestibular disturbances and different waveforms of low frequency wide visual field motions. For both roll and pitch axes, subjects tilted the trainer in which they were seated in the direction of field rotation. This visual bias was much stronger for pitch backwards with upward field rotation. Frequency response analysis showed the dominance of visual cues at low frequencies (below 0.06 Hz) and the reliance on vestibular information in the high frequency range for both axes. Models suggest that operator balancing responses at high frequencies are mainly processed by the semicircular canals rather than the otolith organs. The results also suggest that the subject tends to rely less on the otolith organs for pitch perception than for roll.

Huang, J.-K.↗
NASA NTRS1989

Airfoil stall penetration at constant pitch rate and high Reynolds number

The model wing consists of a set of fiberglass panels mounted on a steel spar that spans the 8 ft test section of the UTRC Large Subsonic Wind Tunnel. The first use of this system was to measure surface pressures and flow conditions for a series of constant pitch rate ramps and sinusoidal oscillations a Mach number range, a Reynolds number range, and a pitch angle range. It is concluded that an increased pitch rate causes stall events to be delayed, strengthening of the stall vortex, increase in vortex propagation, and increase in unsteady airloads. The Mach number range causes a supersonic zone near the leading edge, stall vortex to be weaker, and a reduction of unsteady airloads.

Lorber, Peter F.↗
NASA NTRS1988

Rarefied-flow pitching moment coefficient measurements of the Shuttle Orbiter

An overview of the process for obtaining the Shuttle Orbiter rarefied-flow pitching moment from flight gyro data is presented. The extraction technique involves differentiation of the output of the pitch gyro after accounting for nonaerodynamic torques, such as those produced by gravity gradient and the Orbiter's auxiliary power unit and adjusting for drift biases. The overview of the extraction technique includes examples of results from each of the steps involved in the process, using the STS-32 mission as a typical sample case. The total pitching moment and moment coefficient (Cm) for that flight are calculated and compared with preflight predictions. The flight results show the anticipated decrease in Cm with increasing altitude. However, the total moment coefficient is less than predicted using preflight estimates.

Blanchard, R. C.↗
NASA NTRS1989

Thrust vectoring effect on time-optimal 90 degrees angle of attack pitch up maneuvers of a high alpha fighter aircraft

Using thrust vectoring, the problem of pitching up a high alpha fighter aircraft to 90 degrees angle of attack in minimum time is considered. Pontryagin's maximum principle is used together with a two-point boundary value numerical algorithm to derive open-loop controls for various parameterized limits on thrust vectoring angles. Without thrust vectoring, a high alpha fighter with initial conditions 0.6 Mach number and 15,000 feet requires 7.0 seconds to pitch-up to 90 degrees. However, with 20-degree angle thrust vectoring, the pitch-up takes only 1.5 seconds with a final Mach number of 0.47. Also, the gain in altitude is less than 100 feet. More important, additional thrust vectoring yields litle benefit beyond the 20-degree angles. This paper describes control solutions in detail for thrust vectoring angles between 0 and 90 degrees.

Stalford, Harold↗
NASA NTRS1989

Surface pressure distributions on a delta wing undergoing large amplitude pitching oscillations

Wind tunnel experiments were performed on a 70 deg sweep delta wing to determine the effect of a sinusoidal pitching motion on the pressure field on the suction side of the wing. Twelve pressure taps were placed from 35 to 90 percent of the chord, at 60 percent of the local semi-span. Pressure coefficients were measured as a function of Reynolds number and pitch rate. The pressure coefficient was seen to vary at approximately the same frequency as the pitching frequency. The relative pressure variation at each chord location was comparable for each case. The average pressure distribution through each periodic motion was near the static distribution for the average angle of attack. Upon comparing the upstroke and downstroke pressures for a specific angle of attack, the downstroke pressures were slightly larger. Vortex breakdown was seen to have the most significant effect at the 40 to 45 percent chord location, where a decrease in pressure was apparent.

Thompson, Scott A.↗
NASA NTRS1990

Unsteady surface pressure distributions on a delta wing undergoing large amplitude pitching motions

Wind tunnel experiments were performed on a 70-deg-sweep delta wing to determine the effect of a sinusoidal pitching motion on the pressure field on the suction side of the wing. Pressure taps were placed from 35-90 percent of the chord, at 60 percent of the local semi-span. Pressure coefficients were measured as functions of Reynolds number and pitch rate. The surface pressure distribution was seen to vary at the same frequency as the pitching frequency, though distortion due to the vortex breakdown was observed. Comparing the upstroke (angle of attack increasing) and downstroke (angle of attack decreasing) pressures for a specific angle of attack, a time lag in the pressure distribution was observed. The downstroke pressures were slightly larger at the forward chord locations. Vortex breakdown was seen to have the most significant effect at the 40-45-percent chord location, where an increase in local pressure was apparent, as well as a distortion of the periodic pressure fluctuation.

Thompson, S. A.↗
NASA NTRS1990

Schlieren studies of compressibility effects on dynamic stall of airfoils in transient pitching motion

Compressibility effects on the flowfield of an airfoil executing rapid transient pitching motion from 0 - 60 degrees over a wide range of Mach numbers and pitching rates were studied using a stroboscopic schlieren flow visualization technique. The studies have led to the first direct experimental documentation of multiple shocks on the airfoil upper surface flow for certain conditions. Also, at low Mach numbers, additional coherent vortical structures were found to be present along with the dynamic stall vortex, whereas at higher Mach numbers, the flow was dominated by a single vortex. The delineating Mach number for significant compressibility effects was 0.3 and the dynamic stall process was accelerated by increasing the Mach number above that value. Increasing the pitch rate monotonically delayed stall to angles of attack as large as 27 degrees.

Chandrasekhara, M. S.↗
NASA NTRS1990

Pitch angle distributions of energetic ions in the lobes of the distant geomagnetic tail

A model is presented which accounts for observed pitch angle distributions of energetic ions in the lobes of the deep geomagnetic tail. Energetic (greater than 35 keV) ion data from the ISEE-3 spacecraft obtained during 1982-1983, when the spacecraft made a series of transversals of the distant geomagnetic tail (X sub GSE greater than -238 R sub E) is considered. Analysis indicates that under usual conditions the lobe pitch angle distribution is highly peaked at pitch angles closely perpendicular to the magnetic field direction while also showing a small downtail anisotropy. It is noted, however, that during periods of solar particle enhancements the lobe distributions become much more clearly isotropic. The proposed model successfully reproduces these features of the data and also accounts for the more isotropic ion population observed in the lobe during solar particle events, when the terrestrial component of the magnetosheath source may be considered negligeable in comparison to the enhanced solar component.

Owen, C. J.↗
NASA NTRS1990

A proposed definition for a pitch attitude target for the microburst escape maneuver

The Windshear Training Aid promulgated by the Federal Aviation Administration (FAA) defines the practical recovery maneuver following a microburst encounter as application of maximum thrust accompanied by rotation to an aircraft-specific target pitch attitude. In search of a simple method of determining this target, appropriate to a variety of aircraft types, a computer simulation was used to explore the suitability of a pitch target equal in numerical value to that of the angle of attack associated with stall warning. For the configurations and critical microburst shears simulated, this pitch target was demonstrated to be close to optimum.

Bray, Richard S.↗
NASA NTRS1990

Cosmic-ray pitch angle scattering in isotropic turbulence. II - Sensitive dependence on the dissipation range spectrum

The leading-order quasi-linear expressions for cosmic-ray pitch-angle scattering in isotropic magnetic turbulence were analyzed using three separate spectral forms: the Gaussian, the exponential, and the power-law. It is shown that the low-energy limit for the pitch-angle diffusion coefficient did not universally yield the 'slab' results obtained with a Gaussian dissipation range by Bieber et al. (1988). Instead, it was found that the low-energy limit depends on the steepness of the dissipation range spectrum, and the asymptotic functional forms can range between the slab results and the Fisk et al. (1974) results. It is also shown that the 90-deg pitch-angle limit displays a sensitive dependence on the form of the dissipation range spectrum and can depart dramatically from either the slab result or the result of Fisk.

Smith, Charles W.↗
NASA NTRS1991

Combined energy and pitch angle diffusion of pickup ions at Comet Halley

It is well known that cometary pickup ions, e.g., H2O(+), OH(+), O(+), CO(+), H(+), initially form a ring-beam distribution in the solar wind reference frame, which is highly unstable to the growth of MHD waves (such as ion-cyclotron waves). The low-frequency magnetic fluctuations (or waves), which were observed upstream of Comet Halley, cannot only pitch-angle-scatter the pickup ions so that the distribution becomes at least partially isotropized, but also stochastically accelerate the ions, resulting in the energetic ion populations observed in the vicinity of Comet Halley. Here, numerical solutions of the quasi-linear diffusion equation were used to investigate the cometary ion pickup process at Comet Halley. Both pitch angle and energy diffusion are taken into account. Many quasi-linear models of cometary pickup ions exist which involve one type of diffusion or the other but not both types at once. It is found that the pitch angle scattering occurs faster than the energy diffusion, as expected. Moreover, the results demonstrate that the distribution of accelerated energetic ions is more isotropic than that of ions which have just been picked up. In fact, the ion distribution function on the initial pickup shell is quite anisotropic, even close to the Comet-Halley bow shock.

Ye, Gang↗
NASA NTRS1991

Navier-Stokes predictions of pitch damping for axisymmetric shell using steady coning motion

Previous theoretical investigations have proposed that the side force and moment acting on a body of revolution in steady coning motion could be related to the pitch-damping force and moment. In the current research effort, this approach is applied to produce predictions of the pitch damping for axisymmetric shell. The flow fields about these projectiles undergoing steady coning motion are successfully computed using a parabolized Navier-Stokes computational approach which makes use of a rotating coordinate frame. The governing equations are modified to include the centrifugal and Coriolis force terms due to the rotating coordinate frame. From the computed flow field, the side moments due to coning motion, spinning motion, and combined spinning and coning motion are used to determine the pitch-damping coefficients. Computations are performed for two generic shell configurations, a secant-ogive-cylinder and a secant-ogive-cylinder-boattail.

Weinacht, Paul↗
NASA NTRS1991

Computer programs for the calculation of dual sting pitch and roll angles required for an articulated sting to obtain angles of attack and sideslip on wind-tunnel models

Two programs were developed to calculate the pitch and roll position of the conventional sting drive and the pitch of a high angle articulated sting to position a wind tunnel model at the desired angle of attack and sideslip and position the model as near as possible to the centerline of the tunnel. These programs account for the effects of sting offset angles, sting bending angles, and wind-tunnel stream flow angles. In addition, the second program incorporates inputs form on-board accelerometers that measure model pitch and roll with respect to gravity. The programs are presented and a description of the numerical operation of the programs with a definition of the variables used in the programs is given.

Peterson, John B., Jr.↗
NASA NTRS1991

Target pitch angle for the microburst escape maneuver

The objective of this study was to investigate the constant pitch attitude strategy as a possible non-precision maneuver for recovery from inadvertent wind shear encounters. The Wind Shear Training Aid published by the FAA recommends that upon encountering a severe wind shear, the pilot should apply maximum thrust and rotate the aircraft to an initial pitch target angle of 15 degrees. The 15 degrees target was identified through rigorous analyses using six-degree-of-freedom flight simulators and microburst models representative of actual accident cases. It was found that 15 degrees was an effective target for a wide range of shears, and was generally applicable to most jet transports. This work was undertaken to examine the issue of recovery performance in wind shear of other classes of aircraft - notably turboprop commuters and propeller-driven general aviation planes. It should be possible to postulate a target pitch angle (TPA) for such aircraft, as well.

Mulgund, Sandeep S.↗
NASA NTRS1992

Physics of pitch angle scattering and velocity diffusion. I - Theory

A general theory for the pitch angle scattering and velocity diffusion of particles in the field of a spectrum of waves in a magnetized plasma is presented. The test particle theory is used to analyze the particle motion. The form of diffusion surfaces is examined, and analytical expressions are given for the resonance width and bounce frequency. The resonance widths are found to vary strongly as a function of harmonic number. The resulting diffusion can be quite asymmetric with respect to pitch angle of 90 deg. The conditions for the onset of pitch angle scattering and energy diffusion are explained in detail. Some of the known shortcomings of the standard quasi-linear theory are also addressed, and ways to overcome them are shown. In particular, the often stated quasi-linear gap at 90 deg is found to exist only under very special cases. For instance, oblique wave propagation can easily remove the gap. The conditions for the existence of the gap are described in great detail. A new diffusion equation which takes into account the finite resonance widths is also discussed. The differences between this new theory and the standard resonance broadening theory is explained.

Karimabadi, H.↗
NASA NTRS1992

Unsteady transition measurements on a pitching three-dimensional wing

Boundary layer transition measurements were made during an experimental study of the aerodynamics of a rectangular wing undergoing unsteady pitching motions. The wing was tested at chordwise Mach numbers between 0.2 and 0.6, at sweep angles of 0, 15, and 30 deg, and for steady state, sinusoidal, and constant pitch rate motions. The model was scaled to represent a full size helicopter rotor blade, with chord Reynolds numbers between 2 and 6 x 10(exp 6). Sixteen surface hot-film gages were located along three spanwise stations: 0.08, 0.27, and 0.70 chords from the wing tip. Qualitative heat transfer information was obtained to identify the unsteady motion of the point of transition to turbulence. In combination with simultaneous measurements of the unsteady surface pressure distributions, the results illustrate the effects of compressibility, sweep, pitch rate, and proximity to the wing tip on the transition and relaminarization locations.

Lorber, Peter F.↗
NASA NTRS1992

On the distribution of pitch angles in external galactic spirals NGC 1232 and NGC 5457

A numerical method, originally developed to analyze the morphology of global and local structure in prototype galaxies, is modified for analyzing observed disk-shape galaxies. Two digitized spiral galaxies NGC 1232 and NGC 5457 with varying degrees of contrast between arm and interarm regions are analyzed. A synergism of partitioning methods and a geometric mean least-squares regression algorithm serves to isolate local arm segments, spurs, feathers, and secondary features and to measure their pitch angles and lengths. The global arms are actually highly disjointed, with arm segments frequently revealing pitch angles between 30 and 50 deg, certainly greater than those of the parent arms. Prominent spurs tend to exhibit a much greater pitch angle. The automated mathematical algorithm is shown to have negligible numerical biasing and could be applied to any number of spiral galaxies manifesting flocculent structure, either prototype or observed, and could possibly be used as a tool for classification of multiple-armed-type galaxies.

Russell, William S.↗
NASA NTRS1930

Test of an adjustable pitch model propeller at four blade settings

This note describes tests of an adjustable blade metal model propeller, both in a free wind stream and in combination with a model fuselage, at four settings of the blades. The model propeller is designed for a uniform nominal pitch/diameter ratio of .7 and the blade settings used correspond to nominal pitch/diameter ratios of .5, .7, .9, and 1.1 at the .6 radius. The tests show that propellers of this type may be considerably changed in setting from the designed pitch angles and yet give excellent performance. The efficiency realized and power absorbed when blades are set at other than the designed angle, are little different than would be obtained from a propeller with uniform pitch equal to the mean pitch of the propeller under test.

Lesley, E P↗