Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHONONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Size- and Temperature-Dependent Suppression of Phonon Thermal Conductivity in Carbon Nanotube Thermoelectric Films

Heat transport in nanoscale carbon materials such as carbon nanotubes and graphene is normally dominated by phonons. Here, measurements of in-plane thermal conductivity, electrical conductivity, and thermopower are presented from 77–350 K on two films with thickness <100 nm formed from semiconducting single-walled carbon nanotubes. These measurements are made with silicon–nitride membrane thermal isolation platforms. The two films, formed from disordered networks of tubes with differing tube and bundle size, have very different thermal conductivity. One film matches a simple model of heat conduction assuming constant phonon velocity and mean free path, and 3D Debye heat capacity with a Debye temperature of 770 K. The second film shows a more complicated temperature dependence, with a dramatic drop in a relatively narrow window near 200 K where phonon contributions to thermal conductivity essentially vanish. This causes a corresponding large increase in thermoelectric figure-of-merit at the same temperature. A better understanding of this behavior can allow significant improvement in thermoelectric efficiency of these low-cost earth-abundant, organic electronic materials. Finally, heat and charge conductivity near room temperature is also presented as a function of doping, which provides further information on the interaction of dopant molecules and phonon transport in disordered nanotube films.

36 MATERIALS SCIENCE↗

Electron–Phonon Coupling in Copper-Substituted Lead Phosphate Apatite

Recent reports of room-temperature, ambient pressure superconductivity in copper-substituted lead phosphate apatite, commonly referred to as LK99, have prompted numerous theoretical and experimental studies into its properties. As the electron–phonon interaction is a common mechanism for superconductivity, the electron–phonon coupling strength is an important quantity to compute for LK99. In this work, we compare the electron–phonon coupling strength among the proposed compositions of LK99. The results of our study are in alignment with the conclusion that LK99 is a candidate for low-temperature, not room-temperature, superconductivity if electron–phonon interaction is to serve as the mechanism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-Throughput Screening of Strong Electron–Phonon Couplings in Ternary Metal Diborides

Here, we perform a high-throughput screening on phonon-mediated superconductivity in a ternary metal diboride structure with alkali, alkaline earth, and transition metals. We find 17 ground states and 78 low-energy metastable phases. From fast calculations of zone-center electron–phonon coupling, 43 compounds are revealed to show electron–phonon coupling strength higher than that of MgB 2 . An anticorrelation between the energetic stability and electron–phonon coupling strength is identified. We suggest two phases, i.e., Li 3 ZrB 8 and Ca 3 YB 8 , to be synthesized, which show reasonable energetic stability and superconducting critical temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Straintronic Effect on Phonon-Mediated Superconductivity of Nb 2 CT 2 (T = O, S, Se, or Te) MXenes

Here, the electronic structures, phonon dispersions, and electron–phonon coupling of Nb 2 CT 2 (T = O, S, Se, or Te) MXenes were investigated via first-principles calculations. Different models of Nb 2 CT 2 were constructed, and the results show that the low-energy models of Nb 2 CT 2 are intrinsic phonon-mediated superconductors. Of the four Nb 2 CT 2 MXenes, Nb 2 CO 2 MXene exhibits the largest superconducting critical temperature ($T_c$) of 14.43 K. The existence of soft modes induced by Kohn anomalies and the contribution of Nb atoms to the Fermi level lead to strong electron–phonon coupling (λ = 0.92) in Nb 2 CO 2 MXene. The $T_c$ of Nb 2 CO 2 is further enhanced by biaxial tensile strain and reaches up to 18.28 K under 4% tensile strain. The predicted $T_c$ of Nb 2 CS 2 is 4.5 K, which is comparable with experimental data. These findings will further stimulate the search for superconducting MXenes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interplay of Surface and Interior Modes in Exciton–Phonon Coupling at the Nanoscale

Exciton-phonon coupling (EXPC) plays a key role in the optoelectronic properties of semiconductor nanocrystals (NCs), but a microscopic picture of EXPC is still lacking, particularly regarding the magnitude and scaling with NC size, the dependence on phonon frequency, and the role of the NC surface. The computational complexity associated with accurately describing excitons and phonons has limited previous theoretical studies of EXPC to small NCs, noninteracting electron-hole models, and/or a small number of phonon modes. We develop an atomistic approach for describing EXPC in NCs of experimentally relevant sizes. We validate our approach by calculating the reorganization energies, a measure of EXPC, for CdSe and CdSe-CdS core-shell NCs, finding good agreement with experimental measurements. We demonstrate that exciton formation distorts the NC lattice primarily along the coordinates of low-frequency acoustic modes. Modes at the NC surface play a significant role in smaller NCs while interior modes dominate for larger systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Connectivity-Dependent Exciton–Phonon Coupling in Cesium Bismuth Halide Quantum Dots

Metal halide octahedra form the fundamental functional building blocks of metal halide perovskites, dictating their structures, optical properties, electronic structures, and dynamics. Here, in this study, we show that the connectivity of bismuth halide octahedra in Cs 3 Bi 2 Br 9 and Cs 3 Bi 2 I 9 quantum dots (QDs) changes with different halide elements. We use first-principles calculations to reveal the key role of the connectivity of bismuth halide octahedra on the wave function symmetry, Huang-Rhys factor, and exciton-phonon interaction strength. Following QD synthesis via a ligand-mediated transport method, the effect of connectivity is verified with transient absorption spectroscopy, where we contrast Cs 3 Bi 2 Br 9 and Cs 3 Bi 2 I 9 QD exciton dynamics. In photoexcited Cs 3 Bi 2 I 9 QDs, phonons related to the vibrational motions of face-sharing [BiI 6 ] 3- bioctahedra couple strongly to the electronic state and drive rapid carrier relaxation. Equivalent signals are not observed for photoexcited Cs 3 Bi 2 Br 9 QDs, implying a lack of phonon involvement in band-edge absorption and subsequent exciton relaxation. Our findings suggest that structural engineering can effectively tune the exciton-phonon coupling and therefore influence exciton relaxation and recombination in perovskite nanomaterials.

TDDFT↗

Extended anharmonic collapse of phonon dispersions in SnS and SnSe

The lattice dynamics and high-temperature structural transition in SnS and SnSe are investigated via inelastic neutron scattering, high-resolution Raman spectroscopy and anharmonic first-principles simulations. We uncover a spectacular, extreme softening and reconstruction of an entire manifold of low-energy acoustic and optic branches across a structural transition, reflecting strong directionality in bonding strength and anharmonicity. Further, our results solve a prior controversy by revealing the soft-mode mechanism of the phase transition that impacts thermal transport and thermoelectric efficiency. Our simulations of anharmonic phonon renormalization go beyond low-order perturbation theory and capture these striking effects, showing that the large phonon shifts directly affect the thermal conductivity by altering both the phonon scattering phase space and the group velocities. These results provide a detailed microscopic understanding of phase stability and thermal transport in technologically important materials, providing further insights on ways to control phonon propagation in thermoelectrics, photovoltaics, and other materials requiring thermal management.

36 MATERIALS SCIENCE↗

Efficient up-conversion in CsPbBr 3 nanocrystals via phonon-driven exciton-polaron formation

Lead halide perovskite nanocrystals demonstrate efficient up-conversion, although the precise mechanism remains a subject of active research. This study utilizes steady-state and time-resolved spectroscopy methods to unravel the mechanism driving the up-conversion process in CsPbBr 3 nanocrystals. Employing above- and below-gap photoluminescence measurements, we extract a distinct phonon mode with an energy of ~7 meV and identify the Pb-Br-Pb bending mode as the phonon involved in the up-conversion process. This result was corroborated by Raman spectroscopy. We confirm an up-conversion efficiency reaching up to 75%. Transient absorption measurements under conditions of sub-gap excitation also unexpectedly reveal coherent phonons for the subset of nanocrystals undergoing up-conversion. This coherence implies that the up-conversion and subsequent relaxation is accompanied by a synchronized and phased lattice motion. This study reveals that efficient up-conversion in CsPbBr 3 nanocrystals is powered by a unique interplay between the soft lattice structure, phonons, and excited states dynamics.

Anti-Stokes Photoluminescence↗

Ultrafast low-temperature metal–insulator interface phonon dynamics and heat transport in a Pt/Gd 3 Fe 5 O 12 heterostructure

Interfacial thermal and acoustic phenomena have an important role in quantum science and technology, including in spintronic and spincaloritronic materials and devices. Simultaneous measurements of the low-temperature thermal and acoustic properties of a metal/insulator heterostructure reveal distinct dynamics in the characteristic phonon frequency ranges of acoustic and thermal transport. The measurements probed a heterostructure consisting of a thin film of Pt on the ferrimagnetic insulator gadolinium iron garnet (Gd 3 Fe 5 O 12 , GdIG) grown epitaxially on a gadolinium gallium garnet substrate. Ultrafast structural dynamics within the Pt layer were tracked using time-resolved ultrafast x-ray diffraction and analyzed to probe interfacial acoustic and thermal properties. The rapid heating of the Pt layer by a 400 nm wavelength femtosecond-duration optical pulse produced transient structural changes that provided the stimulus for these measurements. Rapid heating produced a broadband acoustic pulse that was partially reflected by the Pt/GdIG interface. Temporal frequencies up to 740 GHz, corresponding to angular frequencies of several THz, were detected in a wavelet analysis of the acoustic oscillations of the strain in the Pt layer. The structural results were analyzed to determine (i) the acoustic damping coefficient and phonon mean free path in Pt at frequencies of hundreds of GHz and (ii) the Grüneisen anharmonicity parameter. The thermal conductance of the Pt/GdIG interface was tracked using the slower, tens-of-picosecond-scale, dynamics of the initial cooling of the heated Pt layer. Analysis using a model based on the Boltzmann transport equation shows that the phonon transmission is lower at the phonon frequencies relevant to thermal transport than for subterahertz regime acoustics.

Acoustic phenomena↗

Hot carrier relaxation and inhibited thermalization in superlattice heterostructures: The potential for phonon management

One of the main loss mechanisms in photovoltaic solar cells is the thermalization of photogenerated hot carriers via phonon-mediated relaxation. By inhibiting these relaxation mechanisms and reducing thermalization losses, it may be possible to improve the power conversion efficiency of solar cells beyond the single gap limit. Here, type-II InAs/AlAsSb multi-quantum well (MQW) structures are investigated to study the impact of the phononic properties of the AlAsSb barrier material in hot carrier thermalization. Experimental and theoretical results show that by increasing the barrier thickness (increasing the relative contribution of AlAsSb content in the superlattices), the relaxation of hot carriers is reduced as observed in power-dependent photoluminescence and thermalization analysis. Furthermore, this is attributed to an increase in the phononic bandgap of the MQW with increasing AlAsSb composition reducing the efficiency of the dominant Klemens mechanism as the phononic properties shift toward a more AlSb-like behavior.

14 SOLAR ENERGY↗

Ultra-wide bandgap β-Ga 2 O 3 films: Optical, phonon, and temperature response properties

Optical and phonon interactions of Ga 2 O 3 thin films with nanocrystalline morphology were studied at extreme temperatures. The films were grown using a sputtering technique and analyzed via temperature response transmission, Raman scattering, and high-resolution deep-UV photoluminescence (PL). Raman modes indicated that the structure corresponds to the β-phase. The optical-gap at the range of 77–620 K exhibited a redshift of ~200 meV, with a temperature coefficient of ~0.4 meV/K. The optical-gap at room-temperature is 4.85 eV. The electron–phonon interaction model at that temperature range pointed to a low energy phonon, ~31 meV, that is involved in the thermal properties of the optical-gap. Detailed Urbach energy analysis indicated that defects are the dominant mechanism controlling the band-edge characteristics even at an elevated temperature regime where phonon dominance is usually expected. Defects are attributed to the disordered forms of graphite that were detected via Raman scattering and to the granular morphology of the film. A deep-UV laser with an above bandgap exaction line of 5.1 eV was employed to map the PL of the films. The highly resolved spectra, even at room-temperature, show a strong emission of ~3.56 eV attributed to self-trapped holes (STHs). The STH is discussed and modeled in terms of the self-trapped exciton. Moreover, a very distinct but low-intensity emission was found at 4.85 eV that agrees with the value of the optical-gap and is attributed to bandgap recombination. The intensity ratio between the STH and that of the bandgap was found to be 6:1.

36 MATERIALS SCIENCE↗

The phononic and charge density wave behavior of entire rare-earth tritelluride series with chemical pressure and temperature

Here, we present comprehensive phononic and charge density wave properties (CDW) of rare-earth van der Waals tritellurides through temperature dependent angle-resolved Raman spectroscopy measurements. All the possible rare-earth tritellurides (RTe3) ranging from R = La–Nd, Sm, Gd–Tm were synthesized through a chemical vapor transport technique to achieve high quality crystals with excellent CDW characteristics. Raman spectroscopy studies successfully identify the emergence of the CDW state and transition temperature (TCDW), which offers a non-destructive method to identify their CDW response with micron spatial resolution. Temperature dependent Raman measurements further correlate how the atomic mass of metal cations and the resulting chemical pressure influence its CDW properties and offer detailed insight into the strength of CDW amplitude mode-phonon coupling during the CDW transition. Angle-resolved Raman measurements offer the first insights into the CDW-phonon symmetry interplay by monitoring the change in the symmetry of phonon mode across the CDW transition. Overall results introduce the library of RTe3 CDW materials and establish their characteristics through the non-destructive angle-resolved Raman spectroscopy technique.

36 MATERIALS SCIENCE↗

Two-well injector direct-phonon terahertz quantum cascade lasers

We present an experimental study on a terahertz quantum cascade laser (THz QCL) design that combines both two-well injector and direct-phonon scattering schemes, i.e., a so-called two-well injector direct-phonon design. As a result of the two-well injector direct-phonon scheme presented here, the lasers benefit from both a direct phonon scattering scheme for the lower laser level depopulation and a setback for the doping profile that reduces the overlap of the doped region with active laser states. Additionally, our design also has efficient isolation of the active laser levels from excited and continuum states as indicated by negative differential resistance behavior all the way up to room temperature. This scheme serves as a good platform for improving the temperature performance of THz QCLs as indicated by the encouraging temperature performance results of the device with a relatively high doping level of 7.56 × 10 10 cm −2 and T max ∼ 167 K. With the right optimization of the molecular beam epitaxy growth and interface quality, the injection coupling strength, and the doping density and its profile, the device could potentially reach higher temperatures than the latest records reached for the maximum operating temperature (T max ) of THz QCLs.

47 OTHER INSTRUMENTATION↗

Monolithic AlScN/SiC phononic waveguides for scalable acoustoelectric and quantum devices

Unlike conventional surface acoustic wave devices, phononic waveguide systems enable higher circuit density and stronger strain and piezoelectric fields, making them promising for advanced acoustoelectric and quantum applications. One such material system for generating and guiding phonons at gigahertz frequencies is AlScN on SiC, which can be synthesized by sputter depositing AlScN directly onto SiC wafers. The AlScN on the SiC platform allows for tightly vertically-confined acoustic modes with high electromechanical coupling, high speed of sound, and simple fabrication of strip and rib waveguides. Until now, this system has only been studied as a slab waveguide platform, i.e., without any lateral waveguiding. Here, we demonstrate a two-dimensionally confined phononic architecture in AlScN on SiC that supports guided modes at 2.95 and 4.05 GHz. These modes exhibit strong electromechanical coupling coefficients (k 2 = 4.27%) and propagation losses on the order of 10 dB/mm. Furthermore, this architecture is well-suited for phononic routing and power-efficient active or nonlinear devices such as amplifiers, mixers, and oscillators, and is compatible with the integration of quantum systems, including vacancy centers, charge carriers, photons, and spins, either embedded in SiC or heterogeneously integrated on the surface.

Electrical components↗

Implications of phonon anisotropy on thermal conductivity of fluorite oxides

Abstract Fluorite oxides are attractive ionic compounds for a range of applications with critical thermal management requirements. In view of recent reports alluding to anisotropic thermal conductivity in this face-centered cubic crystalline systems, we perform a detailed analysis of the impact of direction-dependent phonon group velocities and lifetimes on the thermal transport of fluorite oxides. We demonstrate that the bulk thermal conductivity of this class of materials remains isotropic despite notable anisotropy in phonon lifetime and group velocity. However, breaking the symmetry of the phonon lifetime under external stimuli including boundary scattering present in nonequilibrium molecular dynamics simulations of finite size simulation cell gives rise to apparent thermal conductivity anisotropy. We observe that for accurate determination of thermal conductivity, it is important to consider phonon properties not only along high symmetry directions commonly measured in inelastic neutron or x-ray scattering experiments but also of those along lower symmetry. Our results suggests that certain low symmetry directions have a larger contribution to thermal conductivity compared to high symmetry ones.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Uncovering obscured phonon dynamics from powder inelastic neutron scattering using machine learning

The study of phonon dynamics is pivotal for understanding material properties, yet it faces challenges due to the irreversible information loss inherent in powder inelastic neutron scattering spectra and the limitations of traditional analysis methods. In this study, we present a machine learning framework designed to reveal obscured phonon dynamics from powder spectra. Using a variational autoencoder, we obtain a disentangled latent representation of spectra and successfully extract force constants for reconstructing phonon dispersions. Notably, our model demonstrates effective applicability to experimental data even when trained exclusively on physics-based simulations. The fine-tuning with experimental spectra further mitigates issues arising from domain shift. Analysis of latent space underscores the model’s versatility and generalizability, affirming its suitability for complex system applications. Furthermore, our framework’s two-stage design is promising for developing a universal pre-trained feature extractor. This approach has the potential to revolutionize neutron measurements of phonon dynamics, offering researchers a potent tool to decipher intricate spectra and gain valuable insights into the intrinsic physics of materials.

domain adaptation↗

Thin-film lithium niobate on diamond as a platform for efficient spin-phonon coupling

Negatively charged silicon vacancy (SiV − ) centers in diamond are leading candidates for solid-state quantum memory that can be controlled using electromagnetic or acoustic waves. The latter are particularly promising due to the strong strain response of SiV − , enabling large spin-phonon interaction strengths. Indeed, coherent spin control via surface acoustic waves (SAWs) has been demonstrated and is essential for developing on-chip phononic quantum networks. However, the absence of piezoelectricity in diamond requires an interface with a piezoelectric material for efficient transduction and delivery of acoustic waves to spins in diamonds. Here, we demonstrate a heterogeneously integrated phononic platform that combines thin-film lithium niobate with diamond to enable acoustic control of single SiV − spins. Additionally, leveraging large SAW-induced strain at the location of SiV − , we achieve coherent acoustic control of an electron spin with more than twofold improvement in Rabi frequency compared to state-of-the-art devices based on aluminum nitride on diamond. Furthermore, this work represents a crucial step towards realizing phonon-based quantum information processing systems.

Optically detected magnetic resonance↗

Performance of a phonon-mediated kinetic inductance detector at the NEXUS cryogenic facility

Microcalorimeters that leverage microwave kinetic inductance detectors to read out phonon signals in the particle-absorbing target, referred to as kinetic inductance phonon-mediated (KIPM) detectors, offer an attractive detector architecture to probe dark matter (DM) down to the fermionic thermal relic mass limit. A prototype KIPM detector featuring a single aluminum resonator patterned onto a 1-gram silicon substrate was operated in the Northwestern EXerimental Underground Site (NEXUS) low-background facility at Fermilab for characterization and evaluation of this detector architecture’s efficacy for a DM search. An energy calibration was performed by exposing the bare substrate to a pulsed source of 470-nm photons, resulting in a baseline resolution on the energy absorbed by the phonon sensor of 2.1 ± 0.2 eV, a factor of two better than the current state of the art, enabled by quasiparticle lifetimes extending up to 6.5 ms. However, due to the subpercent phonon collection efficiency, the resolution on energy deposited in the substrate is limited to σ E = 318 ± 29 eV. We further model both the signal pulse shape as a function of device temperature to extract quasiparticle lifetimes, and the observed noise spectra.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗