A Microprocessor Controller for Phasing the acclerator
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Geochemical modeling results of water extracts from simulated immobilized low-activity waste (ILAW) glasses, placed in lysimeters for eight years suggest that the secondary phase reaction network developed using product consistency test (PCT) results at 90°C may need to be modified for field conditions. For sediment samples that had been collected from near the glass samples, the impact of glass corrosion could be readily observed based upon the pH of their water extracts. For unimpacted sediments the pH ranged from 7.88 to 8.11 with an average of 8.04. Sediments that had observable impacts from glass corrosion exhibited elevated pH values (as high as 9.97). For lysimeter sediment samples that appear to have been impacted by glass corrosion to the greatest extent, saturation indices determined for analcime, calcite, and chalcedony in the 1:1 water extracts were near equilibrium and were consistent with the secondary phase reaction network developed using PCT results at 90°C. Fe(OH) 3 (s) also appears to be essentially at equilibrium in extracts impacted by glass corrosion, but with a solubility product (log K sp ) that is approximately 2.13 units lower than that used in the secondary phase reaction network developed using PCT results at 90°C. The solubilities of TiO 2 (am) and ZrO 2 (am) also appear to be much lower than that assumed in the secondary phase reaction network developed using PCT results at 90°C. The extent that the solubility of TiO 2 (am) and ZrO 2 (am) were reduced relative to that assumed in the secondary phase reaction network developed using PCT results at 90°C could not be quantified because the concentrations of Ti and Zr in the extracts were below the estimated quantification limit. Gibbsite was consistently highly oversaturated in the extract while dawsonite was at or near equilibrium. This suggests that dawsonite might be a more suitable phase for the secondary phase reaction network than gibbsite under field conditions. This may be due to the availability of carbonate that exists in the Hanford sediments as calcite. A significant source of carbonate was not available in the PCTs and this may account for why this phase did not appear in the PCTs. Sepiolite was consistently highly undersaturated, suggesting that another phase controls the solubility of magnesium. For samples that were most impacted by the effects of glass corrosion, magnesite appears to control glass corrosion. For samples that show less impacts from glass corrosion, clinochlore-7A or saponite-Mg appears to control the magnesium concentrations. For zinc, it appears that zincite is a better candidate than Zn(OH) 2 -γ for controlling zinc concentrations in the extracts; however, in some samples all zinc phases considered were highly oversaturated. As a result the phase that controls zinc concentrations in the lysimeter extracts remains uncertain.
Phase and power control methods that satisfy the requirements of superconducting accelerators to magnetron RF sources were considered by a simplified kinetic model of a magnetron driven by a resonant injected signal. The model predicting and explaining stable, low noise operation of the tube below the threshold of self-excitation (the Hatrree voltage in free run mode) at a highest efficiency, a wide range of power control and a wide-band phase control was well verified in experiments demonstrating capabilities of the magnetron transmitters for powering of state of the art superconducting accelerators. Descriptions of the kinetic model, the experimental verification and a conceptual scheme of the highly-efficient magnetron RF transmitter for the accelerators are presented and discussed.
Abstract Objective Northern Pike Esox lucius recently invaded Box Canyon Reservoir, Washington, expanding to over 10,000 individuals by 2011. To limit further impacts, a significant reduction in population abundance was required. Project objectives were to reduce relative abundance (catch per unit effort [CPUE]) to less than 1.7 Northern Pike/net (87% reduction) in the core area and to less than 0.5 Northern Pike/net in the northern reservoir section within 3 years and then maintain those abundance targets thereafter. Methods Using gill nets, we conducted intensive annual (2012–2018) suppression each spring, focusing on spawning aggregations in shallow (<2-m), flooded habitats. To evaluate CPUE, a standardized spring pike index netting (SPIN) survey was conducted annually in May and compared to suppression netting CPUE. Result In total, 17,464 Northern Pike were removed in 4868 net sets, with 92.9% captured in the first 3 years, limiting future recruitment. Mean SPIN CPUE in the core area declined from a presuppression (2011) high of 13.2 Northern Pike/net to less than 1.0 Northern Pike/net by 2014. Effort was reduced by up to 80% as the project transitioned from the initial suppression phase (2012–2014) to a control phase (2015–2018), which explored the minimum effort required to maintain abundance targets. A significant rebound in CPUE occurred from 2017 to 2018, indicating that over 267 net sets annually may be required for long-term control. Although the mean CPUE (±95% confidence interval) increased slightly in 2018 (0.6 ± 0.5 Northern Pike/net), the target abundance in the core area was achieved annually from 2013 to 2018. Changes in suppression CPUE reflected those observed in SPIN surveys, further validating the survey and corroborating abundance trends. Conclusion Results demonstrate that the suppression of Northern Pike in large, complex waters is feasible but requires a substantial long-term commitment. We expect the suppression of this invasive species to become standard practice outside of its native range. The methodology and equipment described here could be applied directly or modified by others to suppress Northern Pike.
Techniques that facilitate control of dual phase tuners are provided. In one example, a system includes a first phase tuner and a second phase tuner. The first phase tuner is driven to a first phase bias that is different than a desired phase bias for an interferometer. The second phase tuner is driven to a second phase bias. A combination of the first phase bias and the second phase bias corresponds to the desired phase bias.
We present, to the best of our knowledge, a novel method for the generation of multiple Bessel-like (Bessel–Gauss) beams with tilted wavefronts whose optical phases can be controlled independently. In the far field multiple field-free regions develop that are persistent to interference effects and the optical phase. The extent of these field-free regions can be controlled through the tilt angle of the wavefront with a theoretical maximum resolution of 0.1 mrad. Experimentally we employ a spatial light modulator, a lens, and an axicon, each suitable for narrow-band (continuous-wave) and broadband operation. Because of the simplicity in the optical elements, the number of noninterfering Bessel-like beams can be scaled on demand for applications that require multiple sources for coherent imaging or multiple intense beams over a controllable region with the added benefit of a field-free region for detection. Here, for reasons of clarity, we characterized two beams.
Solidification of low-activity wastes with cementitious materials is a widely accepted technique that contains and isolates waste from the hydrologic environment. The radionuclides I-129, Se-75, Tc-99, and U-238 are identified as long-term dose contributors. The anionic nature of these radionuclides in aqueous solutions allows them to readily leach into the subsurface environment. Any failure of concrete encasement may result in water intrusion and consequent mobilization of radionuclides from the waste packages via mass flow and/or diffusion into the surrounding subsurface environment. Assessing the long-term performance of waste grouts for encasement of radionuclides requires understanding the: (1) speciation and interaction of the radionuclides within the concrete wasteform, (2) diffusion of radionuclide species when contacted with vadose zone porewater or groundwater under environmentally relevant conditions, and (3) long-term durability and weathering of concrete waste forms. An improved understanding of the interactions of long-lived radionuclides in cementitious matrices will improve predictions of the long-term fate of these sequestered contaminants. An integrated laboratory investigation has been conducted including: (1) a multifaceted spectroscopic investigation to interrogate the speciation and interaction of radionuclides within concrete wasteforms, (2) solubility tests to quantify the stability of solid phases identified as radionuclide-controlling phases, (3) quantify the diffusion of radionuclides from concrete wasteforms into surrounding subsurface sediment under realistic moisture contents (4%, 7%, and 15% by weight moisture content), (4) quantify the long-term durability of concrete waste forms as a function environmental parameters relevant to depository conditions, and (5) identify the formation of secondary phases or processes (microcracking) that influence radionuclide retention. Data obtained from this investigation provides valuable information for understanding the speciation, behavior, and fate of radionuclides immobilized within concrete wasteforms under vadose zone conditions and underscores the necessity for robust, multi-disciplinary performance assessments for concrete waste forms.
Close control over the active catalyst phase and hence carbon nanotube structure remains challenging in catalytic chemical vapor deposition since multiple competing active catalyst phases typically co-exist under realistic synthesis conditions. Here, using in-situ X-ray diffractometry, we show that the phase of supported iron catalyst particles can be reliably controlled via the addition of NH{sub 3} during nanotube synthesis. Unlike polydisperse catalyst phase mixtures during H{sub 2} diluted nanotube growth, nitrogen addition controllably leads to phase-pure γ-Fe during pre-treatment and to phase-pure Fe{sub 3}C during growth. We rationalize these findings in the context of ternary Fe-C-N phase diagram calculations and, thus, highlight the use of pre-treatment- and add-gases as a key parameter towards controlled carbon nanotube growth.
A four-way waveguide RF power distribution system for testing the Spallation Neutron Source (SNS) multi-cavity cryomodule to investigate the collective behavior has been developed. A single klystron operating at 805MHz for 1.3 msec at 60Hz powers the 4-way waveguide splitter to deliver up to 400 kW to individual cavities. Each cavity is fed through a combination of waveguide splitters and vector modulators (VM) to provide independent magnitude and phase controls. The waveguide vector modulator consists of two quadrature hybrids and two motorized waveguide phase shifters. The phase shifters and the assembled waveguide vector modulators were individually tested and characterized for low power and high RF power in the SNS RF test facility. Precise calibrations of magnitude and phase were performed to generate the look up tables (LUTs) to provide operational references during the cryomodule test. An I-Q demodulator module was developed and utilized to measure relative phases in pulsed high RF power operation. PLC units were developed for mechanical control of the phase shifters. Initial low/high power measurements were made using LabVIEW. An operation algorithm has been implemented into EPICS control for the cryomodule test stand.
The phase stability and microstructure evolution of zirconia nanofilms on Si substrates prepared by ion beam assisted deposition (IBAD) upon thermal annealing and intensive radiation have been studied by in situ transmission electron microscopy (TEM), ex situ X-ray diffraction, and Raman spectroscopy. For as-prepared amorphous-dominant ZrO2 thin films, a phase transformation sequence of amorphous-to-tetragonal and tetragonal-to-monoclinic has been identified upon increasing annealing temperature from 500, 850, to 1000 °C. This phase transformation sequence varying with annealing temperature is accompanied by concomitant grain growth from ~5 to ~50 nm, consistent with the grain-size-controlled phase stability as a result of total energy crossover among different zirconia polymorphs. Upon ion bombardments of 350 KeV O+ and 1 MeV Kr2+ at room temperature, a monoclinic-to-tetragonal phase transformation was observed in the monoclinic-dominant ZrO2. This monoclinic-to-tetragonal phase transformation may be attributed to the oxygen vacancy accumulation in ZrO2 upon irradiation. Furthermore, both 1 MeV Kr2+ and 350 KeV O+ bombardments on the amorphous-dominant ZrO2 lead to an amorphous-to-tetragonal phase transformation as a result of radiation-induced recrystallization process. Thermodynamically metastable tetragonal ZrO2 phase can be stabilized at room temperature under intensive radiation by relatively low-energy ion bombardments. These results suggest a method of combining both thermal annealing and ion beam technique for controlling ZrO2 phase stability and thus tailoring materials properties for many engineering applications including actinide host matrix for advanced nuclear energy systems.
Controllable phase engineering is vital for precisely tailoring material properties since different phase structures have various electronic states and atomic arrangements. Rapid synthesis of thermodynamically metastable materials, especially two-dimensional metastable materials, with high efficiency and low cost remains a large challenge. Here we report flash Joule heating (FJH) as an electrothermal method to achieve the bulk conversion of transition metal dichalcogenides, MoS 2 and WS 2 , from 2H phases to 1T phases in milliseconds. The conversions can reach up to 76% of flash MoS 2 using tungsten powder as conductive additive. Different degrees of phase conversion can be realized by controlling the FJH conditions, such as reaction duration and additives, which allows the study of ratio-dependent properties. First-principles calculations confirm that structural processes associated with the FJH, such as vacancy formation and charge accumulation, result in stabilization of the 1T phases. Furthermore, FJH offers rapid access to bulk quantities of the hitherto hard-to-access 1T phases, a promising method for further fundamental research and diverse applications of metastable phases.
Highlights: • Preparation of nanostructured In{sub 2}O{sub 3} microspheres. • Morphology and phase control of In{sub 2}O{sub 3}. • Gas sensors based on the In{sub 2}O{sub 3} microspheres exhibit excellent sensing properties for the detection of formaldehyde. - Abstract: Urchin-like InOOH microspheres were successfully prepared by a convenient and controllable method. Such experimental parameters as solvents and complexing reagents on the formation of the urchin-like InOOH microspheres were investigated. Scanning electron microscopy, X-ray diffraction and infrared spectroscopy were employed to investigate the evolution process of the urchin-like InOOH precursors. Furthermore, the formation mechanism of the urchin-like InOOH microspheres was proposed. By annealing the urchin-like InOOH precursor at different temperatures under ambient pressure, rhombohedral corundum-type indium oxide (rh-In{sub 2}O{sub 3}), cubic bixbyite-type indium oxide (c-In{sub 2}O{sub 3}) and mixed phases of rh-In{sub 2}O{sub 3} and c-In{sub 2}O{sub 3} were obtained. The gas sensing properties of the prepared In{sub 2}O{sub 3} samples were examined. It was found that the sensors based on the prepared In{sub 2}O{sub 3} samples exhibited excellent response and selectivity to formaldehyde.
The subtle and fundamental issue of indistinguishability and interference between independent pathways to the same target state is examined in the context of coherent control of atomic and molecular processes, with emphasis placed on possible 'which-way' information due to quantum entanglement established in the quantum dynamics. Because quantum interference between independent pathways to the same target state occurs only when the independent pathways are indistinguishable, it is first shown that creating useful coherence between nondegenerate states of a molecule for subsequent quantum interference manipulation cannot be achieved by collisions between atoms or molecules that are prepared in momentum and energy eigenstates. Coherence can, however, be transferred from light fields to atoms or molecules. Using a particular coherent control scenario, it is shown that this coherence transfer and the subsequent coherent phase control can be readily realized by the most classical states of light, i.e., coherent states of light. It is further demonstrated that quantum states of light may suppress the extent of phase-sensitive coherent control by leaking out some which-way information while 'incoherent interference control' scenarios proposed in the literature have automatically ensured the indistinguishability of multiple excitation pathways. The possibility of quantum coherence in photodissociation product states is also understood in terms of the disentanglement between photodissociation fragments. Results offer deeper insights into quantum coherence generation in atomic and molecular processes.
An integrated approach to thermal modulation of relative phase between two optical vortices with opposite chirality has been demonstrated on a silicon-on-insulator substrate. The device consists of a silicon-integrated optical vortex emitter and a phase controlled 3 dB coupler. The relative phase between two optical vortices can be actively modulated on chip by applying a voltage on the integrated heater. The phase shift is shown to be linearly proportional to applied electrical power, and the rotation angle of the interference pattern is observed to be inversely proportional to topological charge. This scheme can be used in lab-on-chip, communications and sensing applications. It can be intentionally implemented with other modulation elements to achieve more complicated applications.
We propose an alternative way of implementing several elementary quantum gates for qubits in the coherent-state basis. The operations are probabilistic and employ single-photon subtractions as the driving force. Our schemes for single-qubit phase gate and two-qubit controlled phase gate are capable of achieving arbitrarily large phase shifts with currently available resources, which makes them suitable for the near-future tests of quantum-information processing with superposed coherent states.
Controlling magnetization dynamics is imperative for developing ultrafast spintronics and tunable microwave devices. However, the previous research has demonstrated limited electric-field modulation of the effective magnetic damping, a parameter that governs the magnetization dynamics. Here, we propose an approach to manipulate the damping by using the large damping enhancement induced by the two-magnon scattering and a nonlocal spin relaxation process in which spin currents are resonantly transported from antiferromagnetic domains to ferromagnetic matrix in a mixed-phased metallic alloy FeRh. This damping enhancement in FeRh is sensitive to its fraction of antiferromagnetic and ferromagnetic phases, which can be dynamically tuned by electric fields through a strain-mediated magnetoelectric coupling. In a heterostructure of FeRh and piezoelectric PMN-PT, we demonstrated a more than 120% modulation of the effective damping by electric fields during the antiferromagnetic-to-ferromagnetic phase transition. Our results demonstrate an efficient approach to controlling the magnetization dynamics, thus enabling low-power tunable electronics.