Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxygen evolution reaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

The application of electrochemical impedance spectroscopy for characterizing the degradation of Ni(OH)2/NiOOH electrodes

Electrochemical impedance spectra of rolled and bonded and sintered porous nickel battery electrodes were recorded periodically during charge/discharge cycling in concentrated KOH solution at various temperatures. A transmission line model (TLM) was adopted to represent the impedance of the porous electrodes, and various model parameters were adjusted in a curve fitting routine to reproduce the experimental impedances. Degradation processes for rolled and bonded electrodes were deduced from changes in model parameters with electrode cycling time. In developing the TLM, impedance spectra of planar (non-porous) electrodes were used to represent the pore wall and backing plate interfacial impedances. These data were measured over a range of potentials and temperatures, and an equivalent circuit model was adopted to represent the planar electrode data. Cyclic voltammetry was used to study the characteristics of the oxygen evolution reaction on planar nickel electrodes during charging, since oxygen evolution can affect battery electrode charging efficiency and ultimately electrode cycle life if the overpotential for oxygen evolution is sufficiently low. Transmission line modeling results suggest that porous rolled and bonded nickel electrodes undergo restructuring during charge/discharge cycling prior to failure.

Macdonald, D. D.↗
DOE OSTI2021

A simple convertible electrolyzer in membraneless and membrane-based modes for understanding water splitting mechanism

State-of-the-art membrane-based electrolyzers such as proton exchange membrane electrolyzer cells, are costly, susceptible to degradation, and time-consuming for electrode evaluation and triple-phase boundary electrochemical reaction studies. Here, a simple convertible electrolyzer in membraneless and membrane-based modes is proposed. For the first time, this enables comprehensive investigations of water splitting with pure water, acidic and alkaline electrolytes in one cell. With the simple electrolyzer and high-speed visualization system, the influences of flow rate, electrolytes, concentration, and Nafion membrane on the oxygen evolution reactions (OERs), hydrogen evolution reactions (HERs) and electrolyzer performance are comprehensively investigated. Visualization results reveal that water splitting only occurred at the edge between the electrode and the Nafion membrane in pure water. However, they occurred on the whole electrode surface in alkaline and acidic electrolytes, indicating easily tunable reaction sites with the convertible electrolyzer. This demonstrates the feasibility of using the simple convertible electrolyzer for understanding the water splitting mechanism. The relation between electrolyte thickness and resistances with different electrolytes is also quantified. This research provides an insight for optimizing electrochemical devices while delivering an inexpensive and fast way for electrode evaluations and electrochemical reaction studies.

25 ENERGY STORAGE↗
DOE OSTI2024

Synthesis, Processing, and Use of Isotopically Enriched Epitaxial Oxide Thin Films

Isotopic engineering has emerged as a key approach to study the nucleation, diffusion, phase transitions, and reactions of materials at an atomic level. It aims to uncover mass transport pathways, kinetics, and operational and failure mechanisms of functional materials and devices. Understanding these phenomena leads to deeper insights into important physical processes, such as the transport of ions in energy conversion and storage devices and the role of active sites and supports during heterogeneous catalytic reactions. Likewise, isotopic engineering is being pursued as a means of modifying functionality to enable future technological applications. In this Account, we summarize our recent work employing isotope labeling (e.g., 18 O 2 and 57 Fe) during thin film synthesis and postgrowth processing to reveal growth mechanisms, defect chemistry, and elemental diffusion under working and extreme conditions. Isotope-resolved analysis techniques with nanometer-scale spatial resolution, such as time-of-flight secondary ion mass spectrometry and atom probe tomography, facilitate the accurate quantification of isotopic placement and concentration in our well-defined heterostructures with precisely positioned, isotope-enriched layers. By measuring the nanometer-scale redistribution between natural abundance and isotopically enriched oxygen layers during the deposition of Fe 2 O 3 and Cr 2 O 3 by molecular beam epitaxy, we identified intermixing processes driven by surface adatoms occurring both at the film growth surface and within the first few layers below the surface. Further insights into synthesis mechanisms were gained by studying the tungsten oxide thin films grown by evaporating WO 3 powder in the presence of background 18 O 2 , revealing minimal incorporation of background oxygen during the film formation process. Thermal and radiation-enhanced diffusion in epitaxial Fe and Cr oxides were precisely tracked using 18 O and 57 Fe tracer layers incorporated into model epitaxial oxide thin films. This approach has allowed us to access thermal diffusion behavior at lower temperatures than previously measured, revealing a potential changeover in diffusion mechanism. Understanding radiation-enhanced diffusion in model oxides that represent the surface layers on the structural components of nuclear reactors informs our understanding of their corrosion behavior under irradiation. Isotopic labeling can also provide unique insights into the surface exchange reactions and defect chemistry of electrocatalysts. For instance, tracking the change in 18 O concentration at the surface of an epitaxial LaNiO 3 thin film after the electrocatalytic oxygen evolution reaction revealed the participation of lattice oxygen, confirming a hypothesis that had been proposed previously. Lastly, we highlight a new direction wherein we perform in situ processing studies utilizing isotopic tracers in conjunction with model epitaxial thin films within the atom probe tomography instrument. Additionally, this Account illustrates the great potential of isotopic engineering to enable fundamental mechanistic insights into physical processes and engineer functional properties in epitaxial films, heterostructures, and superlattices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hierarchical Polyelemental Nanoparticles as Bifunctional Catalysts for Oxygen Evolution and Reduction Reactions

Efficient electrocatalysts are critical in various clean energy conversion and storage systems. Polyelemental nanomaterials are attractive as multi-functional catalysts due to their wide compositions and synergistic properties. However, controlled synthesis of polyelemental nanomaterials is difficult due to their complex composition. Herein, we present a one-step synthetic strategy to fabricate a hierarchical polyelemental nanomaterial, which contains ultrasmall precious metal nanoparticles (IrPt, ~5 nm) anchored on spinel-structure transition metal oxide nanoparticles. The polyelemental nanoparticles serve as excellent bifunctional catalysts for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). The mass catalytic activity of the polyelemental nanoparticles is 7-times higher than that of Pt in ORR and 28-times that of Ir in OER at the same overpotentials, demonstrating the high activity of the bifunctional electrocatalyst. We attribute this outstanding performance to the controlled multiple elemental composition, mixed chemical states, and large electroactive surface area. The hierarchical nanostructure and polyelemental design of these nanoparticles offers a general and powerful alternative material for catalysis, solar cells, and more.

25 ENERGY STORAGE↗
DOE OSTI2025

Amorphous electrocatalysts for oxygen and hydrogen evolution reactions: Advances in hydrogen production

The electrochemical splitting of water into oxygen and hydrogen is fundamental for renewable energy storage and conversion. The development of cost-effective and highly efficient electrocatalysts remains essential for industrial-scale implementation of this technology. Recent advances have highlighted the superior activity, stability and structural adaptability of amorphous electrocatalysts compared to their crystalline counterparts. This review critically examines synthesis strategies, characterisation techniques, and the electrochemical performance of amorphous materials for both oxygen evolution (OER) and hydrogen evolution (HER) reactions. Key factors influencing catalytic efficiency, including electronic structure and surface chemistry, are discussed in detail and contextualised with established literature. The review also highlights the critical role of enthalpic contributions in governing reaction energetics and catalyst performance, which aids in understanding and optimising electrocatalytic efficiency. Notably, ongoing research continues to reveal that amorphous catalysts consistently deliver improved performance in water-splitting applications, highlighting their growing relevance in electrocatalysis. The rationale for employing amorphous catalysts in water splitting is articulated, emphasising their unique advantages. By integrating recent findings and outlining future research directions, this review underscores the pivotal role of amorphous materials in advancing sustainable hydrogen production and identifies promising avenues for catalyst innovation.

Amorphous catalysts↗
DOE OSTI2025

Influence of Surface Defects on WO 3 Photoelectrodes for Catalyzing Chloride Oxidation in Water

Tungsten oxide (WO 3 ) is an n-type semiconductor due to oxygen vacancies (□ O •• in Kroger-Vink notation) or surface protonation as H x WO 3 . It is one of the few acid-stable oxides under large positive bias, which makes WO 3 ideal for interrogating the mechanism of the chloride oxidation reaction (COR). The large, positive valence band edge of ∼3 eV provides the overpotential necessary to carry out the COR, but the reaction competes with the oxygen-evolution reaction in water. The □ O •• defect density can be controlled by the atmosphere under which the material is annealed, so WO 3 films were prepared by a spin-coating method from an ammonium metatungstate precursor annealed at 500 °C under air, flowing O 2 , and flowing argon. Annealing the films in a flowing O 2 atmosphere hinders the formation of □ O ••, and annealing in Ar leads to greater surface W 6+ , likely due to expelling intercalated H + . The saturated photocurrent density (j ph ) is highest in films with the greatest concentration of W 5+ and greatest concentration of oxide defects: (0.66 mA/cm 2 annealed in air, 0.58 mA/cm 2 annealed in Ar, and 0.49 mA/cm 2 annealed in O 2 , reported at 1.5 V vs Ag/AgCl, pH 3 (before the onset of a dark reaction). The defect concentrations are determined by X-ray photoelectron spectroscopy. In all cases the Faradaic efficiency for the COR is near unity. Finally, we demonstrate that W 5d states can be probed by ligand K-edge X-ray absorption near-edge spectroscopy via pre-edge (Cl 1s → W 5d) transitions, lower in energy than the ligand-centered (Cl 1s → 4p) transition. We use this analysis to show the presence of W─Cl covalent bonds on the WO 3 films post-COR, corroborated by DFT calculations. Furthermore, this result stands in contrast to the commonly assumed mechanistic proposal invoking outer-sphere electron transfer to a physisorbed chloride ion.

Cl K-edge↗
DOE OSTI2025

From Pure to Seawater Electrolysis: Unveiling the Impact of Ionic Species and Contaminants on Electrocatalysis

Water electrolysis, including seawater splitting to produce hydrogen and oxygen, stands as a promising approach for the efficient storage of intermittent energy. However, the half-reactions of water splitting, the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), are known to be very sensitive toward the quality of water employed and are susceptible to contaminants originating from various sources, including the electrolyte or the electrodes. Those contaminants have a profound impact on the activity of these reactions of water splitting by modifying the electronic and physical structures of electrocatalysts as well as electrode–electrolyte interfaces. For seawater electrolysis, the unintentional presence of impurities, such as anions, cations, and organic compounds, affects the catalyst stability, selectivity, and activity. Despite the existence of numerous comprehensive reviews that delve into various aspects of catalysts and their structure–property relationships for several electrocatalytic reactions, the impact of contaminants has often been ignored. This critical review endeavors to address this issue by providing an overview of the diverse sources of contaminants influencing electrocatalytic water splitting and seawater splitting reactions, delineating the trends in electrochemical parameters and detailing different characterization methods for elucidating the physical and electronic changes of the electrode and electrolyte.

HER↗
DOE OSTI2024

Prediction of O and OH Adsorption on Transition Metal Oxide Surfaces from Bulk Descriptors

In the search for stable and active catalysts, density functional theory and machine learning (ML) based models can accelerate the screening of materials. While stability is conveniently addressed on the bulk level of computation, the modelling of catalytic activity requires expensive surface simulations. Here, in this work, we develop models for the surface adsorption energy of O and OH intermediates across a consistent and extensive dataset of pure transition metal oxide surfaces. We show that adsorption energies across metal oxidation states of +2 to +6 are well captured from the metal-oxygen bond strength extracted from the bulk level calculation. Specifically, we calculate the integrated crystal orbital Hamiltonian population (ICOHP) of the metal-oxygen bond in the bulk oxide and employ a simple normalization scheme to obtain a strong correlation with adsorption energetics. By combining our ICOHP descriptor with non DFT features in a Gaussian Process regression (GPR) model, we achieve high model accuracy with mean absolute errors of 0.166 and 0.219 eV for OH and O adsorption, respectively. By targeting the O-OH adsorption energy difference with our GPR model, we predict the the oxygen evolution reaction (OER) activity from bulk descriptors only. Furthermore, we utilize the strong correlation between the COHP and metal oxygen bond lengths to rapidly predict adsorption energetics and catalytic activity from the optimized bulk geometry. Our approach can enable an efficient search for active catalysts by eliminating the need for surface calculations in the initial screening phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Unusual Role of Point Defects in Perovskite Nickelate Electrocatalysts

Low-cost transition-metal oxide is regarded as a promising electrocatalyst family for an oxygen evolution reaction (OER). The classic design principle for an oxide electrocatalyst believes that point defect engineering, such as oxygen vacancies (VO .. ) or heteroatom doping, offers the opportunities to manipulate the electronic structure of material toward optimal OER activity. Oppositely, in this work, we discover a counterintuitive phenomenon that both VO .. and an aliovalent dopant (i.e., proton (H + )) in perovskite nickelate (i.e., NdNiO 3 (NNO)) have a considerably detrimental effect on intrinsic OER performance. Detailed characterizations unveil that the introduction of these point defects leads to a decrease in the oxidative state of Ni and weakens Ni-O orbital hybridization, which triggers the local electron-electron correlation and a more insulating state. Evidenced by first-principles calculation using the density functional theory (DFT) method, the OER on nickelate electrocatalysts follows the lattice oxygen mechanism (LOM). The incorporation of point defect increases the energy barrier of transformation from OO*(V O ) to OH*(V O ) intermediates, which is regarded as the rate-determining step (RDS). Furthermore, this work offers a new and significant perspective of the role that lattice defects play in the OER process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Ultrafast Photoflash Synthesis of High-Entropy Oxide Nanoparticles

High-entropy metal oxides (HEOs) have recently received growing attention for broad energy conversion and storage applications due to their tunable properties. HEOs typically involve the combination of multiple metal cations in a single oxide lattice, thus bringing distinctive structures, controllable elemental composition, and tunable functional properties. Many synthesis methods for HEOs have been reported, such as solid-state reactions and carbon thermal shock methods. These methods frequently are energy-intensive or require relatively expensive heating equipment. In this work, we report an ultrafast photoflash synthesis method for HEO nanoparticles on diverse substrates. The energy input is provided by a commercial Xe photoflash unit, which triggers exothermic reactions to convert metal salt precursors to HEO nanoparticles within tens of milliseconds. The formation of HEO nanoparticles is attributed to the ultrafast heating (∼106 K/s) and cooling (∼105 K/s) rates of the photoflash and overall high temperature (>1000 K) during the ultrafast synthesis process. When the synthesized CoNiFeCrMn oxide (HEO) is tested as an oxygen evolution reaction electrocatalyst, it shows similar activity to similar materials prepared by other methods. We believe this photoflash synthesis provides a simple method for many others to synthesize diverse HEOs and explore their properties and potential applications.

exothermic reaction synthesis↗
DOE OSTI2023

Enhanced Urea Oxidation Electrocatalytic Activity by Synergistic Cobalt and Nickel Mixed Oxides

In this study, exploring reactive and selective Ni-based electrocatalysts for the urea oxidation reaction (UOR) is crucial for developing urea-related energy conversion technologies. Herein, synergistic interactions in Ni/Co mixed oxides/hydroxides enhanced the UOR with low onset potential, fast reaction kinetics, and good selectivity against oxygen evolution reaction (OER). Our electrochemical measurements and theoretical calculations signified the collaborative interaction of Ni/Co mixed oxide/hydroxide heterostructures to enhance UOR activity. Our results showed that Ni 3+ species, formed at high anodic potential, produced a high anodic current primarily from unwanted OER. Instead, the Ni/Co heterostructures with dominant Ni 2+ and Co 3+ species remained stable at low anodic potential and exhibited anodic current exclusively attributed to UOR. This work highlights the importance of tuning valence charges for designing high-performance and selective UOR electrocatalysts to benefit the environmental remediation of urea runoff and enable urea electrolysis for hydrogen production by replacing conventional OER with UOR at the anode.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Experimental Verification of Ir 5d Orbital States and Atomic Structures in Highly Active Amorphous Iridium Oxide Catalysts

In iridium oxide catalysts, the electronic states whose energies are in the range of energetics and charge transfer kinetics of the oxygen evolution reaction (OER) originate from the Ir 5d orbital states. However, the understanding of the atomic structures and orbital states underlying catalytic reactivity in amorphous iridium oxide oxygen evolving catalysts (Ir-OECs) is incomplete compared to that of crystalline oxides, owing to a lack of direct experimental verification. Here, we present experimental approaches using resonant inelastic X-ray scattering (RIXS) to directly access Ir 5d orbital excitations at the Ir L 3 edge and atomic pair distribution function (PDF) measurements to characterize electronic and coordination structures at the atomic scale. The so-called iridium blue layer (IrBL) and IrO x were formed from the organometallic precursor complex [Cp*Ir(H 2 O) 3 ]SO 4 and the inorganic precursor IrCl 3 , respectively. Ex situ IrBL and IrO x films for RIXS and PDF measurements were prepared by conditioning electrodeposited films at a low voltage. The incident energy RIXS profile of IrO x exhibited extra weak resonantly enhanced excitation below 2 eV energy loss. The feature was clearly different from a single high-energy excitation above 3 eV of IrBL related to the interband transition between π- and σ-antibonding states. The atomic structure refinement based on PDF measurements revealed the atomic structure domains to have edge- and corner-shared IrO 6 octahedra with trigonal-type distortion. Furthermore, density functional theory calculations guided by the refined atomic structures shed light on the electronic structure corresponding to experimental results, including insulating and metallic phases in ex situ IrBL and IrO x films, respectively. Our study establishes different Ir 5d orbital states and atomic structures in two amorphous Ir oxide OER catalysts in their reduction states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Perovskite Oxide–Halide Solid Solutions: A Platform for Electrocatalysts

The successful integration or hybridization of perovskite oxides with their halide cousins would enable the formation of both multi-anionic and multi-cationic solid solutions with unique metal-ion sites and synergistic properties that could potentially surpass the performance of classic perovskites. However, such solid solutions had not been produced previously owing to their distinct formation energies and different synthesis conditions. Solid solutions combining perovskite oxides with fluorides were produced in this study by mechanochemical synthesis. The obtained perovskite oxide–halide solid solutions had highly mixed elements and valences, uniform element distributions, and single-phase crystalline structures. In this work, the solid solution with an optimized combination of oxides and fluorides exhibited enhanced catalytic performance in the oxygen evolution reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Perovskite-Type Solid Solution Nano-Electrocatalysts Enable Simultaneously Enhanced Activity and Stability for Oxygen Evolution

A trade-off between catalytic activity and structural stability generally exists in oxygen evolution electrocatalysis, especially in acidic environment. This dilemma limits the development of higher-performance electrocatalysts that are required by next-generation electrochemical technologies. In this work it is demonstrated that the inverse catalytic activity–structural stability relation can be broken by alloying catalytically inert strontium zirconate with the other catalytically active perovskite, strontium iridate. This strategy results in an alloyed perovskite electrocatalyst with simultaneously improved iridium mass activity and structural stability, by about five times, for the oxygen evolution reaction under acidic conditions. The experimental and theoretical results suggest that the alloying strategy generates multiple positive effects, mainly including the reduction of catalyst size, the decrease of catalyst covalency, and the weakening of surface oxygen-binding ability. The synergistic optimization of bulk and surface properties, as a result, enhances the intrinsic activity and availability of surface iridium sites, whilst significantly inhibiting the surface cation corrosion during electrocatalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Substrate-Driven Catalyst Reducibility for Oxygen Evolution and Its Effect on the Operation of Proton Exchange Membrane Water Electrolyzers

To increase the efficiency of hydrogen production by proton exchange membrane water electrolyzers (PEMWEs), the relationships between the specific activity and stability of the membrane–electrode assembly (MEA) must be clarified. Ir oxide electrodeposited on Ti substrate is used as an oxygen electrode, and its electronic properties and electrochemical behavior in PEMWE operation are observed. The electrode, fabricated through a facile strategy based on annealing in the air atmosphere, enhances the specific oxygen evolution reaction (OER) activity and stability in PEMWE operation. Furthermore, the electronic catalyst–substrate interactions associated with different reducibilities in the heteroatom system are studied. The morphology, electronic properties, and chemical state of the oxygen electrode are investigated through X-ray spectroscopy, microscopy techniques, and computational analyses. Thermal treatment of the catalyst-coated substrate decreases the bulk oxidation state of Ir and increases the surface oxidation state. According to the electrochemical and physical behavior analyses of PEMWEs, the oxygen content in the Ir oxide structure, which defines the OER activity and its stability, is influenced by the crystalline structure and formation of a stable interface between the catalyst and substrate. The outcomes can facilitate the development of strategies for enhancing the performance of PEMWEs and designing rational MEAs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Cu-induced robust Ni 2+ /Ni 3+ transition on amorphous Ni hydroxide-based electrocatalysts for advancing electrochemical ammonia oxidation and hydrogen evolution

The electrochemical ammonia oxidation reaction (AOR) is a promising anodic reaction for hydrogen production, offering a lower theoretical potential compared to oxygen evolution reaction. Despite this thermodynamic advantage, AOR suffers from sluggish multi-electron transfer reaction kinetics and the regeneration of catalytically active Ni 3+ species, which limits both activity and durability. In this study, amorphous NiCu bimetallic catalysts were prepared via facile precipitating metal nitrate deposition (PMND) method. The addition of Cu induces a robust Ni 2+ /Ni 3+ transition, stabilizing catalytically active Ni 3+ species and modulating the electronic structure of Ni. It alters the oxidation and desorption behavior of nitrogen-containing intermediates and facilitating their conversions to NO x species, resulting in fast active site regeneration. Furthermore, amorphous structure provides abundant dangling bonds, which enhances the intrinsic reactivity and accessibility of active sites rather than increasing the number of active sites. As a result, these effects accelerate the overall reaction kinetics. The optimized NiCu 5:1 catalyst achieved an ammonia removal efficiency of ∼100 % and a hydrogen production rate of 2.45 mmol/(h∙cm 2 ) at 1.6 V RHE .

Amorphous electrocatalyst↗
DOE OSTI2021

Contribution of the Sub-Surface to Electrocatalytic Activity in Atomically Precise La 0.7 Sr 0.3 MnO 3 Heterostructures

Electrocatalytic reactions are known to take place at the catalyst/electrolyte interface. Whereas recent studies of size-dependent activity in nanoparticles and thickness-dependent activity of thin films imply that the sub-surface layers of a catalyst can contribute to the catalytic activity as well, most of these studies consider actual modification of the surfaces. Here, in this study, the role of catalytically active sub-surface layers was investigated by employing atomic-scale thickness control of the La 0.7 Sr 0.3 MnO 3 (LSMO) films and heterostructures, without altering the catalyst/electrolyte interface. The activity toward the oxygen evolution reaction (OER) shows a non-monotonic thickness dependence in the LSMO films and a continuous screening effect in LSMO/SrRuO 3 heterostructures. The observation leads to the definition of an “electrochemically-relevant depth” on the order of 10 unit cells. This study on the electrocatalytic activity of epitaxial heterostructures provides new insight in designing efficient electrocatalytic nanomaterials and core-shell architectures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Competitive Valerate Binding Enables RuO 2 -Mediated Butene Electrosynthesis in Water

The (non)-Kolbe oxidation of valeric acid, sourced from a hydrolysis product of cellulose, provides a sustainable synthetic route to access value-added products, such as butene. An essential mechanistic step preceding product formation involves the oxidative and decarboxylative cleavage of a C–C bond. Yet, the role of the electrode surface in mediating this oxidative step remains an open question: the electron transfer can occur either via an inner-sphere or outer-sphere mechanism. Here, we report the electrochemical, in situ spectroscopic, computational, and reactivity studies of RuO 2 -mediated oxidative decarboxylation of valeric acid to butene in aqueous electrolytes. We find that carboxylates bind to RuO 2 anode surfaces at potential values where decarboxylation products are observed. Our results are consistent with a reaction scheme where the competitive and catalytic oxygen evolution reaction (OER) is impeded by these bound carboxylate species while these species are inert toward butene formation. Our results implicate an outer-sphere electron transfer mechanism for decarboxylation where the surface chemistry of the RuO 2 electrode serves to enable higher non-Kolbe reaction selectivity by suppressing the parasitic OER. Furthermore, our findings delineate interfacial design principles for selective electrochemical systems that utilize water as the ultimate oxidant for sustainable decarboxylation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗