Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OHIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Development of a multi-disciplinary ERTS user program in the state of Ohio

The author has identified the following significant results. Although the analysis of the results of presently - used methodology has showed inadequate correlation between the land use change and the various socio-economic factors, a system of analysis was produced that will aid in the future work in this area pointing out the adequacy of the land use data for producing models of desired accuracy. This testing methodology is applicable to other LANDSAT/land use interpretation systems.

Baldridge, P. E.↗

National Geodetic Satellite Program, Part II: Ohio State University

Data analysis was carried out to obtain an improved global network combining all participating tracking stations in a single worldwide coordinate system. Mathematical formulations were derived, programmed, and tested. Observational data were used to determine the relative positions of tracking stations in an arbitrary Cartesian coordinate system. The position of this coordinate system was estimated with respect to an absolute system. A primary network was established in which station positions were known to an internal consistency of 10 meters or better for the following purposes: (1) to establish the relative relationships between the various geodetic datums in use around the world; and (2) to connect isolated tracking stations, islands, navigational beacons, and other points of interest. Results are presented.

Mueller, I. I.↗

Solar heated two level residence--Akron, Ohio

Report describes 1 year evaluation of solar heating and hot water system which satisfied 24 percent of energy requirements. System uses flat plate solar collectors with air as heat transport medium. Rock storage bin stores collected energy; air to liquid heat pump supplies backup heat.

Source record↗

Solar-Cooled Classroom Building--Columbus, Ohio

Advanced, evacuated tubular collectors supply energy for heating and cooling of a university building. Report includes site files, specification references, drawings, and installation, operation and maintenance instructions.

Source record↗

Solar-Heated and Cooled Office Building--Columbus, Ohio

Final report documents solar-energy system installed in office building to provide space heating, space cooling and domestic hot water. Collectors mounted on roof track Sun and concentrate rays on fluid-circulating tubes. Collected energy is distributed to hot-water-fired absorption chiller and space-heating and domestic-hot-water preheating systems.

Source record↗

Solar heating and cooling system installed at Columbus, Ohio

The Solar Energy System was installed as a part of a new construction of a college building. The building will house classrooms and laboratories, administrative offices and three lecture halls. The Solar Energy System consists of 4,096 square feet (128 panels) Owens/Illinois Evacuated Glass Tube Collector Subsystem, and a 5,000 gallon steel tank below ground storage system. Hot water is circulated between the collectors and storage tank, passing through a water/lithium bromide absorption chiller to cool the building.

Source record↗

Solar heating system installed at Troy, Ohio

The completed system was composed of three basic subsystems: the collector system consisting of 3,264 square feet of Owens Illinois evacuated glass tube collectors; the storage system which included a 5,000 gallon insulated steel tank; and the distribution and control system which included piping, pumping and heat transfer components as well as the solemoid activated valves and control logic for the efficient and safe operation of the entire system. This solar heating system was installed in an existing facility and was, therefore, a retrofit system. Extracts from the site files, specifications, drawings, installation, operation and maintenance instructions are included.

Source record↗

Solar heating, cooling and domestic hot water system installed at Columbia Gas System Service Corporation, Columbus, Ohio

The solar energy system installed in the building has 2,978 sq ft of single axis tracking, concentrating collectors and provides solar energy for space heating, space cooling and domestic hot water. A 1,200,000 Btu/hour water tube gas boiler provides hot water for space heating. Space cooling is provided by a 100 ton hot water fired absorption chiller. Domestic hot water heating is provided by a 50 gallon natural gas domestic storage water heater. Extracts from the site files, specification references, drawings, installation, operation and maintenance instructions are included.

Source record↗

Investigation of air transportation technology at Ohio University, 1980

Specific configurations of first and second order all digital phase locked loops were analyzed for both ideal and additive gaussian noise inputs. In addition, a design for a hardware digital phase locked loop capable of either first or second order operation was evaluated along with appropriate experimental data obtained from testing of the hardware loop. All parameters chosen for the analysis and the design of the digital phase locked loop were consistent with an application to an Omega navigation receiver although neither the analysis nor the design are limited to this application. For all cases tested, the experimental data showed close agreement with the analytical results indicating that the Markov chain model for first and second order digital phase locked loops are valid.

Mcfarland, R. H.↗

Investigation of air transportation technology at Ohio University, 1981

The increased availability of Loran signals in the United States encouraged consideration of Loran for airborne applications. High quality signal processing to obtain effective signal-to-noise ratios which permit good reliability in position determination consistent with airborne applications is considered. Techniques for deriving air navigation quality information from Loran-C were investigated.

Mcfarland, R. H.↗

Symposium on Aviation Psychology, 1st, Ohio State University, Columbus, OH, April 21, 22, 1981, Proceedings

The impact of modern technology on the role, responsibility, authority, and performance of human operators in modern aircraft and ATC systems was examined in terms of principles defined by Paul Fitts. Research into human factors in aircraft operations and the use of human factors engineering for aircraft safety improvements were discussed, and features of the man-machine interface in computerized cockpit warning systems are examined. The design and operational features of computerized avionics displays and HUDs are described, along with results of investigations into pilot decision-making behavior, aircrew procedural compliance, and aircrew judgment training programs. Experiments in vision and visual perception are detailed, as are behavioral studies of crew workload, coordination, and complement. The effectiveness of pilot selection, screening, and training techniques are assessed, as are methods for evaluating pilot performance.

Source record↗

Application of LANDSAT data to monitor land reclamation progress in Belmont County, Ohio

Strip and contour mining techniques are reviewed as well as some studies conducted to determine the applicability of LANDSAT and associated digital image processing techniques to the surficial problems associated with mining operations. A nontraditional unsupervised classification approach to multispectral data is considered which renders increased classification separability in land cover analysis of surface mined areas. The approach also reduces the dimensionality of the data and requires only minimal analytical skills in digital data processing.

Bloemer, H. H. L.↗

Investigation of air transportation technology at Ohio University, 1982

Refinement of the Loran-C receiver system for general aviation use was described. The capability to provide area navigation sometimes called random navigation (RNAV) was accomplished by providing new software. Microcomputers were used to accomplish the calculations which were performed in flight to demonstrate these devices are cost effective in the implementation of Loran-C navigational information.

Mcfarland, R. H.↗

Interlobate comparison of glacial-depositional style as evidenced by small-relief glacial landscape features in Illinois, Indiana, and Ohio, utilizing SIR-B

The objectives and expected results of an investigation of the use of the Shuttle Imaging Radar-B (SIR-B) as a basic tool in the recognition and mapping of glacial landforms are discussed. The main goals are: (1) to evaluate the ability of SIR-B to delineate varying sizes, shapes, and relief of surface forms; (2) to compare and contrast SIR-B imagery with selected Seasat SAR imagery; (3) to utilize SIR-B imagery synergistically with available SEASAT SAR, LANDSAT RBV, and other imagery sources to identify and map suites of glacial landforms; and (4) eventually to interpret the suites in terms of ice dynamics and conditions of deglaciation, to relate them to the stratigraphic record, and to evaluate interactions of the major lobes and sublobes.

Johnson, W. H.↗

Air transportation technology program at Ohio University, 1983

The purpose is to provide a research tool, a receiver, such that engineers interested in examining Loran-C performance, usefulness, and other properties will have a flexible, modifiable, and well-known piece of receiving hardware. The significant improvements to the Loran-C receiver are summarized.

Mcfarland, Richard H.↗

Investigation of air transportation technology at Ohio University, 1986

Several important goals were achieved with the work supported by the Joint University Program. Among these goals is the first DC-3 flight with a Navstar Global Positioning System (GPS) receiver collecting positional data and allowing comparisons with simultaneous collected data from the Long Range Navigation system Loran C. The principle purpose for this instrumentation was to learn of the detailed characteristics evident in the Doppler frequency shift from signals being received onboard an aircraft in flight.

Mcfarland, Richard H.↗