SEARCH · Engineering Papers

Results for “Notch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Three-dimensional analysis of chevron-notched specimens by boundary integral method

The chevron-notched short bar and short rod specimens was analyzed by the boundary integral equations method. This method makes use of boundary surface elements in obtaining the solution. The boundary integral models were composed of linear triangular and rectangular surface segments. Results were obtained for two specimens with width to thickness ratios of 1.45 and 2.00 and for different crack length to width ratios ranging from 0.4 to 0.7. Crack opening displacement and stress intensity factors determined from displacement calculations along the crack front and compliance calculations were compared with experimental values and with finite element analysis.

Mendelson, A.↗

NASA NTRS1984

Dynamic stress analysis of smooth and notched fiber composite flexural specimens

A detailed analysis of the dynamic stress field in smooth and notched fiber composite (Charpy-type) specimens is reported in this paper. The analysis is performed with the aid of the direct transient response analysis solution sequence of MSC/NASTRAN. Three unidirectional composites were chosen for the study. They are S-Glass/Epoxy, Kevlar/Epoxy and T-300/Epoxy composite systems. The specimens are subjected to an impact load which is modeled as a triangular impulse with a maximum of 2000 lb and a duration of 1 ms. The results are compared with those of static analysis of the specimens subjected to a peak load of 2000 lb. For the geometry and type of materials studied, the static analysis results gave close conservative estimates for the dynamic stresses. Another interesting inference from the study is that the impact induced effects are felt by S-Glass/Epoxy specimens sooner than Kevlar/Epoxy or T-300/Epoxy specimens.

Murthy, P. L. N.↗

NASA NTRS1985

Fracture analysis of notched composites

The problem of part-through cracks emanating from a central notch in a composite laminate is considered. The composite laminate is modeled as an orthotropic plate and along the branches, it is assumed that the stresses are carried by the fibers only. The stresses along the uncracked portions are assumed to be proportional to the crack opening displacement at the point. After formulating the branched crack problem, the model is applied to a(+45 deg)25 composite laminate. The stress concentration factors for the fibers are computed for various values of the spring constant K. Sample results showing the crack opening displacement are also displayed.

Deale, F.↗

NASA NTRS1985

Interlaminar G(IIc) evaluation of toughened-resin matrix composites using the end-notched flexure test

The usefulness of the end-notched flexure (ENF) test for measuring G(IIc) for toughened composites was evaluated. Calculations were made using the measured flexural compliance from the ENF test and the measured axial modulus. Tests were conducted on three different composite materials, using laminates with two different span lengths and insert sizes. The error associated with neglecting nonlinear terms in the displacement-curvature relationship was analyzed to demonstrate the influence of specimen geometry on G(IIc) measurement. It is concluded that G(IIc) measurement may vary with the method of calculation, span length, or insert thickness, but these effects are minor compared to the large differences in measurements obtained for different materials. Hence, the ENF test is a valid one for screening materials for improvements in interlaminar shear fracture toughness.

Murri, G. B.↗

NASA NTRS1985

Damage initiation at curved free edges - Application to uniaxially loaded plates containing holes and notches

The concept which imputes initial free edge interlaminar damage to the differences in material properties among adjacent laminae, formerly applied to straight free edges, is presently extended to the case of curved free edges through interpretation in terms of differences in the shear and elongation strains among adjacent laminae. Attention is given to both material property differences and laminate strain spatial distributions at the hole edge. Since a large strain level and a small difference in material properties are found to be as damaging as a small strain and large difference, interlaminar damage will probably begin at a circumferential location other than the net section. These findings are further explored in view of a second extension, using the edges replication technique to record damage at a curved free edge. The damage recorded for uniaxially loaded plates with central circular holes and semicircular edge notches are compared with difference theory predictions.

Klang, E. C.↗

NASA NTRS1985

Fatigue response of notched graphite/epoxy laminates

Tests were performed to determine the damage states in quasi-isotropic graphite/epoxy laminates with center holes caused by cyclic tensile loading. The influence of the stacking sequence on the initiation and interaction of damage modes and the relationship between damage, strength, stiffness, and life of the laminates were also studied. X-ray radiography, moire interferometry, and stiffness change were used to monitor damage. Fatigue damage in both laminates began with matrix cracks around the holes leading to delaminations. In laminates cycled at the same percent of notched tensile strength the stacking sequence influenced the density of the matrix cracks and the modes and distribution of the damage. Ply cracking was also caused by the stacking sequence. The damage states in the two laminates produced stiffness changes of 15 to 20 percent, different rates of change in residual strength, and a factor of two to four difference in fatigue life. It was determined that continued cyclic loading produced matrix cracks which led to fatigue of the laminates.

Kress, G. R.↗

NASA NTRS1985

Interlaminar fracture toughness: Three-dimensional finite element modeling for end-notch and mixed-mode flexure

A computational procedure is described for evaluating End-Notch-Flexure (ENF) and Mixed-Mode-Flexure (MMF) interlaminar fracture toughness in unidirectional fiber composites. The procedure consists of a three-dimensional finite element analysis in conjunction with the strain energy release rate concept and with composite micromechanics. The procedure is used to analyze select cases of ENF and MMF. The strain energy release rate predicted by this procedure is in good agreement with limited experimental data. The procedure is used to identify significant parameters associated with interlaminar fracture toughness. It is also used to determine the critical strain energy release rate and its attendant crack length in ENF and/or MMF. This computational procedure has considerable versatility/generality and provides extensive information about interlaminar fracture toughness in fiber composites.

Murthy, P. L. N.↗

NASA NTRS1985

Fatigue Damage in Notched Composite Laminates Under Tension-Tension Cyclic Loads

The results are given of an investigation to determine the damage states which develop in graphite epoxy laminates with center holes due to tension-tension cyclic loads, to determine the influence of stacking sequence on the initiation and interaction of damage modes and the process of damage development, and to establish the relationships between the damage states and the strength, stiffness, and life of the laminates. Two quasi-isotropic laminates were selected to give different distributions of interlaminar stresses around the hole. The laminates were tested under cyclic loads (R=0.1, 10 Hz) at maximum stresses ranging between 60 and 95 percent of the notched tensile strength.

Stinchcomb, W. W.↗

NASA NTRS1986

Finite element analysis of end notch flexure specimen

A finite element analysis of the end notch flexure specimen for mode II interlaminar fracture toughness measurement was conducted. The effect of friction between the crack faces and large deflection on the evaluation of G sub IIc from this specimen were investigated. Results of this study are presented in this paper.

Mall, S.↗

NASA NTRS1985

Fracture analysis of notched composites

In this study the problem of part-through cracks emanating from a central notch in a composite laminate is considered. The composite laminate is modeled as an orthotropic plate and along the branches, it is assumed that the stresses are carried by the fibers only. The stresses along the uncracked portions are assumed to be proportional to the crack opening displacement at that point. After formulating the branched crack problem, the model is applied to a (4 + or - 45 deg) 2s composite laminate. The stress concentration factors for the fibers are computed for various values of the spring constant K.

Delale, F.↗

NASA NTRS1986

Dynamic stress analysis of smooth and notched fiber composite flexural specimens

Murthy, P. L. N.↗

NASA NTRS1986

Finite-element analysis of end-notch flexure specimens

A finite-element analysis of the end-notch flexure specimen for Mode II interlaminar fracture toughness measurement was conducted. The effects of friction between the crack faces and large deflection on the evaluation of G(IIc) from this specimen were investigated. Results of this study are presented in this paper.

Mall, S.↗

NASA NTRS1987

Reducing shuttle-payload dynamic interaction with notch filters

The use of notch filters centered on the estimated bending frequencies to reduce the effect of low-frequency Shuttle-payload dynamic interaction is investigated. The Shuttle-payload dynamics that are studied are with payloads attached to the Shuttle Remote Manipulator System (RMS). Other payload-orbiter connection such as payloads pivoted out of the cargo bay on a tilt table can lead to low-frequency bending modes. Payloads attached to the RMS will, however, present greater problems in that the bending modes will be hard to predict and will tend to vary with time as the RMS changes in orientation.

Appleby, Brent D.↗

NASA NTRS1987

Strain energy release rates of composite interlaminar end-notch and mixed-mode fracture: A sublaminate/ply level analysis and a computer code

A computer code is presented for the sublaminate/ply level analysis of composite structures. This code is useful for obtaining stresses in regions affected by delaminations, transverse cracks, and discontinuities related to inherent fabrication anomalies, geometric configurations, and loading conditions. Particular attention is focussed on those layers or groups of layers (sublaminates) which are immediately affected by the inherent flaws. These layers are analyzed as homogeneous bodies in equilibrium and in isolation from the rest of the laminate. The theoretical model used to analyze the individual layers allows the relevant stresses and displacements near discontinuities to be represented in the form of pure exponential-decay-type functions which are selected to eliminate the exponential-precision-related difficulties in sublaminate/ply level analysis. Thus, sublaminate analysis can be conducted without any restriction on the maximum number of layers, delaminations, transverse cracks, or other types of discontinuities. In conjunction with the strain energy release rate (SERR) concept and composite micromechanics, this computational procedure is used to model select cases of end-notch and mixed-mode fracture specimens. The computed stresses are in good agreement with those from a three-dimensional finite element analysis. Also, SERRs compare well with limited available experimental data.

Valisetty, R. R.↗

NASA NTRS1986

KI-solutions for single edge notch specimens under fixed end displacements

The KI solution for a finite length single-edge notch specimen loaded under fixed-end displacements is derived using a crack compliance analysis. Numerical and experimental checks of the KI solution are provided. Good agreement between the experimental and numerical solutions is observed. The applicability of conventional fracture mechanics to correlate crack growth data generated under displacement control is discussed.

Marchand, N.↗

NASA NTRS1986

Finite element analysis of the end notched flexure specimen for measuring Mode II fracture toughness

The paper presents a finite element analysis of the end-notched flexure (ENF) test specimen for Mode II interlaminar fracture testing of composite materials. Virtual crack closure and compliance techniques employed to calculate strain energy release rates from linear elastic two-dimensional analysis indicate that the ENF specimen is a pure Mode II fracture test within the constraints of small deflection theory. Furthermore, the ENF fracture specimen is shown to be relatively insensitive to process-induced cracks, offset from the laminate midplane. Frictional effects are investigated by including the contact problem in the finite element model. A parametric study investigating the influence of delamination length, span, thickness, and material properties assessed the accuracy of beam theory expressions for compliance and strain energy release rate, GII. Finite element results indicate that data reduction schemes based upon beam theory underestimate GII by approximately 20-40 percent for typical unidirectional graphite fiber composite test specimen geometries. Consequently, an improved data reduction scheme is proposed.

Gillespie, J. W., Jr.↗

NASA NTRS1986

On the analysis and design of the end notched flexure (ENF) specimen for Mode II testing

The end notched flexure (ENF) specimen is examined as a candidate for measuring interlaminar fracture toughness in skew symmetric loading. A simple design study for sizing the ENF specimen to minimize geometric nonlinear response and to avoid nonlinear material behavior or flexural failure is presented. Results indicate that interlaminar shear effects may be significant for tough resin systems requiring large thickness-to-length geometries. The influences of interlaminar shear deformation and friction between the crack surfaces on the strain energy release rate are examined.

Carlsson, L. A.↗

NASA NTRS1986

Short fatigue cracks in notched aluminum specimens

The short-crack fatigue behavior in notched specimens of Al 2024-T3 was studied at values of the stress ratio, R, equal to 0.5, 0.0, -1.0, and -2.0. Crack growth was monitored using a replica technique for cracks ranging in length from a few tens of a micron to the specimen's thickness (2.3 mm). Crack opening displacement was measured for surface cracks as short as 0.035 mm using the interferometric strain/displacement gage, a laser-based optical technique described by Sharpe (1982). It was found that the growth rates of short cracks were faster than the rates of long cracks for R values of -1.0 and -2.0. No significant difference was observed for R = 0.0, and at R = 0.5, the short cracks actually grew more slowly that the long ones. At all R values, the closure stresses measured for short cracks were smaller than those predicted for large cracks.

Lee, J. J.↗