SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Crystals of Cu 2 (pacman) inflate on taking up neon at 46 000 atm through a switch in the ligand conformation.
A neon containing molecular anion is observed and analyzed.
A beam emission spectroscopy system on thermal helium (He) and neon (Ne) has been set up at Wendelstein 7-X to measure edge electron temperature and density profiles utilizing the line-ratio technique or its extension by the analysis of absolutely calibrated line emissions. The setup for a first systematic test of these techniques of quantitative atomic spectroscopy in the limiter startup phase (OP1.1) is reported together with first measured profiles. Lastly, this setup and the first results are an important test for developing the technique for the upcoming high density, low temperature island divertor regime.
Tungsten is planned to be the plasma-facing material for the main chamber and divertor in future devices like ITER, SPARC, and DTT. To address risks associated with tungsten, R&D is being carried out on various toroidal confinement devices. One particular research question is related to the optimum heating mix for ITER. To investigate the influence of the heating scheme on the release and transport of tungsten, a comparison of neutral beam injection (NBI) and ion cyclotron resonance frequency (ICRF) heating was carried out in TEXTOR tungsten test limiter experiments. The experiments were performed under standard L-mode conditions and in radiative improved-mode operation with neon seeding and boronized walls covering the graphite plasma-facing components. The plasma was heated with hydrogen or deuterium NBI alone or with deuterium NBI in combination with H-minority, ion cyclotron resonance heating. A movable solid tungsten limiter was inserted through a limiter lock system into the edge plasma. The impurity release from this limiter was evaluated from visible spectroscopy. The tungsten concentrations in the plasma core were determined by extreme ultraviolet spectroscopy and bolometry. With deuterium NBI alone, strong central radiation and accumulation of W was observed. This can, however, be avoided by adding ICRF heating.
Achieving the ultimate limits of materials and device performance necessitates the engineering of matter with atomic, molecular, and mesoscale fidelity. While common for organic and macromolecular chemistry, these capabilities are virtually absent for 2D materials. In contrast to the undesired effect of ion implantation from focused ion beam (FIB) lithography with gallium ions, and proximity effects in standard e-beam lithography techniques, the shorter mean free path and interaction volumes of helium and neon ions offer a new route for clean, resist free nanofabrication. Furthermore, with the advent of scanning helium ion microscopy, maskless He + and Ne + beam lithography of graphene based nanoelectronics is coming to the forefront. Here, we will discuss the use of energetic Ne ions in engineering graphene devices and explore the mechanical, electromechanical and chemical properties of the ion-milled devices using scanning probe microscopy (SPM). By using SPM-based techniques such as band excitation (BE) force modulation microscopy, Kelvin probe force microscopy (KPFM) and Raman spectroscopy, we demonstrate that the mechanical, electrical and optical properties of the exact same devices can be quantitatively extracted. Additionally, the effect of defects inherent in ion beam direct-write lithography, on the overall performance of the fabricated devices is elucidated.
Achieving core-edge compatible divertor detachment is a critical requirement for stable operation in future fusion devices. This study compares nitrogen and neon seeding in KSTAR H-mode plasmas with carbon walls, combining experiments and SOLPS-ITER modelling to evaluate their radiative dissipation and core-edge compatibility. Experimentally, N seeding achieved stronger divertor detachment, with larger reductions in target particle and heat fluxes, a higher divertor radiation fraction, and a lower core radiation fraction than Ne. In contrast, Ne seeding triggered a significant rise in core radiation followed by H–L back transitions, limiting the maximum total radiated power fraction to roughly half that of N. SOLPS-ITER simulations reproduced the experimental trends and revealed that the better core-edge compatibility of N arises from its higher divertor retention in addition to its higher cooling factor. The relative positions of the stagnation points of impurity poloidal velocity and ionization sources did not explain the different divertor compression. Instead, in the present modelling, the higher impurity parallel particle flux, resulting from the higher parallel impurity velocity, explains the stronger nitrogen impurity compression in the divertor region. The parallel temperature distribution with N was more favourable for achieving higher impurity parallel velocity than with Ne, because the impurity velocity is governed by modifications of the main ion flow due to friction and thermal forces, both of which strongly depend on the temperature. Ultimately, this behaviour is attributed to the strongly divertor-localized radiation of N. These results demonstrate that N is more effective than Ne in achieving radiative divertor detachment while maintaining low core contamination in KSTAR, consistent with observations in other present tokamaks.
Attosecond noncollinear four-wave-mixing spectroscopy with one attosecond extreme ultraviolet (XUV) pulse and two few-cycle near-infrared (NIR) pulses was used to measure the autoionization decay lifetimes of inner valence electronic excitations in neon atoms. After a 43-48-eV XUV photon excites a 2s electron into the 2s2p 6 (np) Rydberg series, broadband NIR pulses couple the 2s2p 6 3p XUV-bright state to neighboring 2s2p 6 3s and 2s2p 6 3d XUV-dark states. Controllable delays of one or both NIR pulses with respect to the attosecond XUV pulse reveal the temporal evolution of either the dark or bright states, respectively. Experimental lifetimes for the 3s, 3p, and 3d states are measured to be 7±2, 48±8, and 427±40 fs, respectively, with 95% confidence. Accompanying calculations with two independent ab initio theoretical methods, newstock and astra, verify the findings. The results support the expected trend that the autoionization lifetime should be longer for states that have a smaller penetration in the radial region of the 2s core hole, which in this case is for the higher angular momentum Rydberg orbitals. In conclusion, the underlying theory thus links the lifetime results to electron correlation and provides an assessment of the direct and exchange terms in the autoionization process.
The pump-probe experiments enabled by x-ray free-electron lasers (XFEL) will allow us to directly observe correlated electronic motion with attosecond time resolution by detecting photoelectron pairs in coincidence. In helium, the transition between the nonsequential and sequential regime in two-photon double ionization (TPDI) is well explained by a virtual-sequential model. Much less is known, however, about the TPDI process in more complex atoms. Recently, we extended the virtual-sequential model to arbitrary light pulses [Chattopadhyay Phys. Rev. A 108, 013114 (2023)]. This extension employs multichannel scattering states for the single ionization of both the neutral and the ionized target, which we initially applied to helium. In the present study, we show that our extended virtual-sequential model reproduces the qualitative features of the angularly integrated observables with available experimental results for neon, a considerably more complex target. We observe an intriguing feature of inverted two-particle interference in the joint-energy distribution of Ne compared to He. Finally, this phenomenon, attributable to the presence of a final doubly ionized state with triplet symmetry coupled to the two photoelectrons, should be observable with current experimental technologies.
Recent research suggests that the supercritical state consists of liquidlike and gaslike states where particle dynamics and key system properties are qualitatively different. We report experimental evidence of the structural crossover in supercritical neon at pressure and temperature conditions significantly exceeding the critical point values: 250 P c and 6.6 T c . The experimental results show a crossover of the medium-range order structure evidenced by the change of the structure factor with pressure. We also observe the crossover of the short-range order structure indicated by changes in the coordination number. The relative width of the crossover is fairly narrow and is smaller than 10–12% in pressure and temperature. Here, by comparing our experimental results with molecular dynamics simulations, we suggest that the observed crossover can be attributed to the Frenkel line and discuss the relationship between the structural crossover and qualitative changes of dynamical and thermodynamic properties of supercritical matter.
We report new constraints on axionlike particles (ALPs) using data from the NEON experiment, which features 16.7 kg of NaI(Tl) target located 23.7 m from a 2.8 GW thermal power nuclear reactor. Analyzing a total exposure of 3063 kg · day , with 1596 kg · day during reactor-on and 1467 kg · day during reactor-off periods, we compared energy spectra to search for ALP-induced signals. No significant signal was observed, enabling us to set exclusion limits at the 95% confidence level. These limits probe previously unexplored regions of the ALP parameter space, particularly for axion masses ( m a ) near 1 MeV / c 2 . For ALP-photon coupling ( g a γ ), limits reach as low as 6.24 × 10 − 6 GeV − 1 at m a = 3.0 MeV / c 2 , while for ALP-electron coupling ( g a e ), limits reach 4.95 × 10 − 8 at m a = 1.02 MeV / c 2 . This Letter demonstrates the potential for future reactor experiments to probe unexplored ALP parameter space. Published by the American Physical Society 2025
Summary Gallium‐based focused ion beams generated from liquid–metal sources are widely used in micromachining and sample preparation for transmission electron microscopy, with well‐known drawbacks such as sample damage and contamination. In this work, an alternative (neon) focused ion beam generated by a gas field‐ionization source is evaluated for the preparation of electron‐transparent specimens. To do so, electron‐transparent sections of Si and an Al alloy are prepared with both Ga and Ne ion beams for direct comparison. Diffraction‐contrast imaging and energy dispersive x‐ray spectroscopy are used to evaluate the relative damage induced by the two beams, and cross‐sections of milled trenches are examined to compare the implantation depth with theoretical predictions from Monte Carlo simulations. Our results show that for the beam voltages and materials systems investigated, Ne ion beam milling does not significantly reduce the focused ion beam induced artefacts. However, the Ne ion beam does enable more precise milling and may be of interest in cases where Ga contamination cannot be tolerated.
Focused ion beam nanoscale synthesis has emerged as a critical tool for selected area nanofabrication. Helium and neon ion beams from the gas field ion source have recently demonstrated unparalleled resolution among other scanning ion beams. In this review, the authors focus on the nanoscale synthesis applications for these ion species which have been demonstrated to date. The applications and recent work can broadly be grouped into the following categories: (1) Monte Carlo simulations, (2) direct-write milling or sputtering, (3) ion beam lithography, (4) selective ion implantation or defect introduction, and (5) gas-assisted processing. A special emphasis is given toward using He+ and Ne+ for the processing of two dimensional materials, as several groups have demonstrated promising results. Finally, the authors will discuss the future outlook of He+ and Ne+ nanoprocessing techniques and applications.
Here, we report the measurements of the n = 3 → n = 2 L-shell X-ray transitions of neon-like Eu 53+ . These include all seven allowed electric dipole (E1) transitions, five electric quadrupole (E2) transitions, and one magnetic quadrupole (M2) transition. The measurements were carried out at the EBIT-I electron beam ion trap facility at Livermore using an X-ray calorimeter. The measured values agree with many-body perturbation theory calculations within the experimental uncertainties. This includes the transitions that involve a 2s electron and that are, therefore, strongly affected by quantum electrodynamical effects.
Leaf area, wet, and dry weights for leaf samples from sites where field sampling was conducted during the 2018 National Ecological Observatory Network (NEON) Airborne Observation Platform (AOP) imaging spectroscopy and lidar surveys in Gunnison County, Colorado. The sampling sites were located across East River, Washington Gulch, Slate River, and Coal Creek watersheds and contained a mixture of meadow, shrub, and tree sampling sites. This data package contains the leaf area and wet and dry weights for leaves from tree and shrub sampling sites, as well as samples for meadow species present within a given sampling area. Associated data packages contain species composition information at the plot level (DOI: 10.15485/1618130), as well as additional biogeochemical, microbial, and geophysical data as they become available. For full documentation, please see associated reference.This package contains zipped folders of all scans that were used for area calculations for both sampling sites (tree/shrub, site_scans.zip) as well as representative samples from a daily sampling area of meadow species that were found in the 1 m plots (meadow_area_scans.zip). It also contains the macro code that was used in ImageJ for processing of the area calculations. Finally, it includes excel files with the area (cm2), wet weight (g), dry weight (g), leaf mass per area (LMA, g/m2), and leaf water content (%) for each set of scans.
Carbon (C) and nitrogen (N) weight percent concentrations were obtained from the bulk foliar samples collected across East River, Washington Gulch, Slate River, and Coal Creek watersheds in Gunnison, Colorado during the summer of 2018. These samples were collected from sun-lit leaves of meadow, shrub, and tree vegetation types within 72 hours of the National Ecological Observatory Network Airborne Observation Platform (NEON AOP) hyperspectral survey. These samples were dried and then run on an elemental analyzer coupled to a mass spectrometer for C and N concentrations and delta13C. The intention of these data were to provide ground truth data to develop foliar nutrient models across the imaging spectroscopy domain. Additional associated site metadata and vegetation fractional cover information can be found in the associated data releases (DOI: 10.15485/1618130). Here we provide site level C, N, and delta 13C data in the CN_Results_Foliar.csv. All of these samples were also registered with IGSN codes, and the details from that registration with metadata for the samples is included in foliar_sample_igsn_metadata.csv.
The purpose of soil core sampling was to determine soil bulk density, volumetric water content, and soil texture across the sites that were sampled in association with the National Ecological Observatory Network's Airborne Observation Platform (NEON AOP) in 2018. Soil cores were collected from surface (2.5-7.5 cm) and subsurface (50-55cm) depths at sampling sites across East River, Washington Gulch, Slate River, and Coal Creek watersheds in Gunnison, Colorado during the summer of 2018. Surface samples were weighed for determination of soil water content prior to dry down for bulk density calculations. For all samples, we measured dry weight and weight of < 2mm fraction and conducted soil textural analysis. We provide metadata for the samples, raw data files, python code that was used to calculate bulk density, water content, and texture fraction densities from primary datasets, and a final csv file with the calculated soil bulk density, volumetric water content, and soil texture data. Additional associated site metadata and vegetation fractional cover information can be found in the associated data release.
Maps of aspen ploidy (diploid or triploid) developed using National Ecological Observatory Network (NEON) Airborne Observation Platform visible to shortwave infrared imaging spectroscopy data that were acquired over the Upper East River, Colorado in 2018. Maps of aspen distribution, as well as other land cover types that were used to screen for aspen dominated pixels are also provided. Each image file is provided as a GeoTiff with internal tiling and LZW compression. For use of ploidy maps, it is necessary to mask out non-aspen and shaded pixels. Shaded pixels are provided in an associated data package. For full details, please see associated publication and methods description. This dataset is associated with the publication in Ecological Applications.
This dataset provides daily estimates of evapotranspiration (ET) and the transpiration-to-evapotranspiration ratio (T/ET) across 47 terrestrial National Ecological Observatory Network (NEON) sites spanning diverse environmental and biome conditions in the United States across three years of data (2019-2021). Daily ET is reported in both energy units (MJ m⁻² day⁻¹) and equivalent water depth (mm day⁻¹), assuming a constant latent heat of vaporization of 2.45 MJ/kg. The primary method uses a hybrid recurrent neural network–Penman–Monteith framework (RNN-PM), which integrates physically based surface energy balance constraints with data-driven learning to partition ET into transpiration and evaporation components. Model inputs include in situ meteorological observations (air temperature, vapor pressure deficit, wind speed, and radiation) combined with satellite-derived land surface temperature, leaf area index, and soil moisture. For benchmarking and uncertainty assessment, T/ET estimates from seven additional models are included: Priestley-Taylor Jet Propulsion Laboratory (PT-JPL), Penman-Monteith (P-M), Two-Source Energy Balance (TSEB), Support Vector Regression (SVR), and Categorical Boosting (CatBoost), among others—spanning empirical, machine-learning, and process-based approaches (see methods section or linked publication for detailed descriptions). Data Package Contents: The dataset a csv files containing daily ET and T/ET estimates for each site and model, along with associated metadata files these variables. Data can be accessed using common spreadsheet software (e.g., Microsoft Excel, LibreOffice) or programming environments such as R or Python. Together, these data support cross-site comparisons of ecosystem water use, evaluation of ET partitioning methods, and development of improved land–atmosphere exchange models.