Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Natural Probabilities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Infrared observations of the galactic center. I - Nature of the compact sources

Photometry from 1.25 to 12 micrometers and spectrophotometry from 8 to 13 micrometers of the compact sources found in the galactic-center region are reported. In addition, revised 10 and new 20 micrometers maps with 2''.3 resolution are given. The nature of the compact sources is discussed. Some are best identified as stars or star clusters; the brightest source at 2 micrometers is probably a supergiant, and the infrared source near the nonthermal radio source is probably a stellar cluster with density greater than 1 million solar masses/cu pc. Other sources emit most of their luminosity at wavelengths of 10 micrometers and greater; this emission is probably from heated dust. One of the sources is observationally similar to extremely red OH/infrared stars. Other sources have luminosities and linear sizes similar to those of compact H II regions; emission from optically thin silicate dust is seen in these.

Becklin, E. E.↗
NASA NTRS1981

Flares and dynamic aspects

Theory of the dynamic nature of solar flares, eruptive prominences, and coronal transients is surveyed. Two types of flare are considered: compact eruptions (small flares) which are probably loops, and large eruptions of double filament flares. The physical sense of this classification is justified, using solar observations. Even leaving the question unanswered of whether a coronal transient is a loop of ejected matter or a shock wave, the important, perhaps fundamental, role of mass motion in flare physics is evidenced.

Hanssen, E. T.↗
NASA NTRS1986

Titan's latitudinal temperature distribution and seasonal cycle

Voyager IRIS brightness temperature measurements of Titan at a wavelength of 530/cm are crudely indicative of ground or lower tropospheric temperatures and indicate 93 K for the equator and 91 K for both northern and southern high latitudes. The symmetry between north and south is unexpected for the time of Voyager encounter (Northern Titan spring). It is shown that this near-symmetry can arise naturally in a model where the poles are 'pinned' year-round at the dew point of CH4-N2 lakes or, more probably, a CH4-N2 rich surface layer on a deep ethane-rich ocean. For a polar temperature of 91 K, the model implies that the atmosphere contains somewhat less than 8 percent mole fraction of CH4.

Stevenson, D. J.↗
NASA NTRS1987

Turbulence control on airborne laser platform

An avctive flow control device to generate large-scale, periodic structures in a turbulent shear flow is developed. Together with adaptive optics, the device may be used on airborne laser platforms to reduce or eliminate optical distortion caused by the turbulence in the aircraft's boundary layer. A flat plate towed in a water channel is used as a test bed. A cyclic jet issuing from a spanwise slot is used to collect the turbulent boundary layer for a finite time during its 'on' period. When the jet is turned 'off', all of the turbulent fluid is released instantaneously in one large eddy that convects downstream. Flow visualization and hot-film probe measurements are used together with pattern recognition algorithms to demonstrate the viability of the flow control method. The instantaneous velocity signal is used to compute important statistical quantities of the random velocity field, such as the mean, the root-mean-square, the spectral distribution, and the probability density function. When optimized for a given boundary layer, the cyclic jet produces periodic structures that are qualitatively similar to the random, naturally occurring ones. These structures seem to trigger the onset of bursting events near the wall. Thus, the present device generates periodic structures in both the outer and inner regions of a turbulent boundary layer.

Gad-El-hak, Mohamed↗
NASA NTRS1988

The origin and energetics of CTB 80

Deep narrow-band images of the core of the unusual supernova remnant CTB 80 are presented, and the origin and energetics of the remnant are discussed. Based on a description of the core as a wind-blown bubble or bow shock around a pulsar, a scenario is presented relating the core and extended components to a single supernova explosion about 100,000 yr ago. The physical nature of the interface between the pulsar wind and the ambient thermal plasma is considered, and it is concluded that the pulsar is probably moving through shock-compressed material associated with the evolved remnant. It is argued that the core geometry is probably a bow shock viewed partially face-on.

Hester, J. Jeff↗
NASA NTRS1996

Assessment of Precision in Temperatures from the Microwave Sounding Units

Monitoring the earth system has traditionally focused on measurements at the earth's surface because this is where we live and perform our most obvious life sustaining functions. In just the past few decades, however, efforts have been initiated to assess the character of the atmosphere above the surface. Regular upper-air measurements by balloon ascents in scattered locations began in the 1940's and observations from satellites generally began in 1979. The upper air is important in the climate context because changes in these higher levels may offer more discernible relationships to such phenomena as global warming due to the enhanced greenhouse effect than seen at other levels. The probability that climate-change trends in the mid-troposphere (5-8 km) will be more clearly evident against the background of natural variability than at, for example, the surface. Indeed, results from coupled ocean-atmosphere models indicate that in terms of a global mean quantity the troposphere will actually warm at a rate greater than that of the surface temperature. At higher elevations, above 12 km, the IPCC (Intergovernmental Panel on Climate Change) 1990 indicates there is a high degree of certainty that a greenhouse-gas induced decrease in stratospheric temperatures will occur. The measure of change in these upper atmospheric layers, in combination with quantities observed at the surface, provide an ensemble of information to give the most robust opportunity for climate change detection.

Christy, John R.↗
NASA NTRS1994

Impacts with the Earth and Jupiter

The Earth has been subject to impacts from comets and asteroids since its formation, and such impacts have played an important role in the evolution of life on our planet. We now recognize not only the historical role of impacts, but the contemporary hazard posed by such events. In the absence of a complete census of potentially threatening Earth-crossing asteroids or comets (called collectively Near Earth Objects, or NEOs), or even of a comprehensive current search program to identify NEOs, we can consider the hazard only from a probabilistic perspective. In general, the larger the object the greater the hazard, even when allowance is made for the infrequency of large impacts. Most of the danger to human life is associated with impacts by objects roughly 2 km or larger (energy greater than 1 million megatons), which can inject sufficient submicrometer dust into the atmosphere to produce a severe short-term global cooling with subsequent loss of crops, leading to starvation. Hazard estimates suggest that the chance of such an event occurring during a human lifetime is about 1:5000, and the global probability of death from such impacts is of the order of 1:20000, values that can be compared with risks associated with other natural hazards such as earthquakes, volcanic eruptions, and severe storms. The widely-observed impact of Comet Shoemaker-Levy 9 with Jupiter in July 1994 provides a graphic example of such an interplanetary collision and is stimulating worldwide interest in protecting our planet against cosmic impact catastrophes.

Morrison, David↗
NASA NTRS1994

The Impact Hazard

The Earth has been subject to hypervelocity impacts from comets and asteroids since its formation, and such impacts have played an important role in the evolution of life on our planet. We now recognize not only the historical role of impacts, but the contemporary hazard posed by such events. In the absence of a complete census of potentially threatening Earth-crossing asteroids or comets (called collectively Near Earth Objects, or NEOs), or even of a comprehensive cur-rent search program to identify NEOs, we can consider the hazard only from a probabilistic perspective. We know the steep power-law relationship between NEO numbers and size, with many more small bodies than large ones. We also know that few objects less than about 50 m in diameter (with kinetic energy near 10 megatons) penetrate the atmosphere and are capable of doing surface damage. But there is a spectrum of possible impact hazards associated with objects from this 10-megaton threshold all the way up to NEOs 5 km or larger in diameter, which are capable of inflicting severe damage on the environment, leading to mass extinction's of species. Detailed analysis has shown that, in general, the larger the object the greater the hazard, even when allowance is made for the infrequency of large impacts. Most of the danger to human life is associated with impacts by objects roughly 2 km or larger (energy greater than 1 million megatons), which can inject sufficient submicrometer dust into the atmosphere to produce a severe short-term global cooling with subsequent loss of crops, leading to starvation. Hazard estimates suggest that the chance of such an event occurring during a human lifetime is about 1:5000, and the global probability of death from such impacts is of the order of 1:20000, values that can be compared with risks associated with other natural hazards such as earthquakes, volcanic eruptions, and severe storms. However, the impact hazard differs from the others in that it can be largely prevented by a comprehensive survey for threatening objects and the application of technological solutions to deflect or destroy objects that are found to have orbits that will lead to collision with the Earth.

Morrison, David↗
NASA NTRS1995

Measurement of Transcranial Distance During Head-Down Tilt Using Ultrasound

Exposure to microgravity probably elevates blood pressure and flow in the head which may increase intracranial volume (ICV) and pressure (ICP). Due to the slightly compliant nature of the cranium, any increase of ICP will increase ICV and transcranial distance. We used a noninvasive ultrasound technique to measure transcranial distance (frontal to occipital) during head-down tilt. Seven subjects (ages 26-53) underwent the following tilt angles: 90 deg. upright, 30 deg., 0 deg., -6 deg., -10 deg., -6 deg., 0 deg., 30 deg., and 90 deg. Each angle was maintained for 1 min. Ultrasound wave frequency was collected continuously and transcranial distance was calculated (Delta(x) = x(Delta)f/f, where x is path length and f is frequency of the wave) for each tilt angle. Frequency decreased from 503.687 kHz (90 deg. upright) to 502.619 kHz (-10 deg.). These frequencies translated to an increased transcranial distance of 0.403 mm. Although our data suggest a significant increase in transcranial distance during head-down tilt, this apparent increase may result, in part, from head-down tilt-induced subcutaneous edema or cutaneous blood volume elevation. In three subjects, when the above protocol was repeated with an ace bandage wrapped around the head to minimize such edema, the increased transcranial distance from 90 deg. to -10 deg. was reduced by 0.174 mm. Further development of the technique to quantify bone-to-bone expansion unconfounded by cutaneous fluid is necessary. Therefore, this ultrasound technique may provide measurements of changes in cranial dimensions during microgravity.

Torikoshi, Shigeyo↗
NASA NTRS2012

HyDE Framework for Stochastic and Hybrid Model-Based Diagnosis

Hybrid Diagnosis Engine (HyDE) is a general framework for stochastic and hybrid model-based diagnosis that offers flexibility to the diagnosis application designer. The HyDE architecture supports the use of multiple modeling paradigms at the component and system level. Several alternative algorithms are available for the various steps in diagnostic reasoning. This approach is extensible, with support for the addition of new modeling paradigms as well as diagnostic reasoning algorithms for existing or new modeling paradigms. HyDE is a general framework for stochastic hybrid model-based diagnosis of discrete faults; that is, spontaneous changes in operating modes of components. HyDE combines ideas from consistency-based and stochastic approaches to model- based diagnosis using discrete and continuous models to create a flexible and extensible architecture for stochastic and hybrid diagnosis. HyDE supports the use of multiple paradigms and is extensible to support new paradigms. HyDE generates candidate diagnoses and checks them for consistency with the observations. It uses hybrid models built by the users and sensor data from the system to deduce the state of the system over time, including changes in state indicative of faults. At each time step when observations are available, HyDE checks each existing candidate for continued consistency with the new observations. If the candidate is consistent, it continues to remain in the candidate set. If it is not consistent, then the information about the inconsistency is used to generate successor candidates while discarding the candidate that was inconsistent. The models used by HyDE are similar to simulation models. They describe the expected behavior of the system under nominal and fault conditions. The model can be constructed in modular and hierarchical fashion by building component/subsystem models (which may themselves contain component/ subsystem models) and linking them through shared variables/parameters. The component model is expressed as operating modes of the component and conditions for transitions between these various modes. Faults are modeled as transitions whose conditions for transitions are unknown (and have to be inferred through the reasoning process). Finally, the behavior of the components is expressed as a set of variables/ parameters and relations governing the interaction between the variables. The hybrid nature of the systems being modeled is captured by a combination of the above transitional model and behavioral model. Stochasticity is captured as probabilities associated with transitions (indicating the likelihood of that transition being taken), as well as noise on the sensed variables.

Narasimhan, Sriram↗
NASA NTRS2013

The First X-ray Diffraction Patterns of Clay Minerals from Gale Crater

The Mars Science Laboratory (MSL) Rover, Curiosity spent approx 150 sols at Yellowknife Bay (YKB) studying a section of fluvio-lacustrine sedimentary rocks (with potential indications of volcanic influence), informally known as the Yellowknife Bay formation. YKB lies in a distal region of the Peace Vallis alluvial fan, which extends from the northern rim of Gale Crater toward the dune field at the base of Mt Sharp. Sedimentological and stratigraphic observations are consistent with the Yellowknife Bay formation being part of a distal fan deposit, which could be as young as middle Hesperian to even early Amazonian in age (approx 3.5 to 2.5 Ga). The Yellowknife Bay formation hosts a unit of mudstone called the Sheepbed member. Curiosity obtained powdered rock samples from two drill holes in the Sheepbed Member, named John Klein and Cumberland, and delivered them to instruments in Curiosity. Data from CheMin, a combined X-ray diffraction (XRD)/X-ray fluorescence instrument (XRF), has allowed detailed mineralogical analysis of mudstone powders revealing a clay mineral component of approx 20 wt.% in each sample. The clay minerals are important indicators of paleoenvironmental conditions and sensitive recorders of post-depositional alteration processes. The XRD pattern of John Klein reveals a 021 band consistent with a trioctahedral phyllosilicate. A broad peak at approx 10A with a slight inflexion at approx 12A indicates the presence of 2:1 type clay minerals in the John Klein sample. The trioctahedral nature of the clay minerals, breadth of the basal reflection, and presence of a minor component with larger basal spacing suggests that John Klein contains a trioctahedral smectite (probably saponite), whose interlayer is largely collapsed because of the low-humidity conditions. The XRD patterns show no evidence of corrensite (mixed-layer chlorite/smectite) or chlorite, which are typical diagenetic products of trioctahedral smectites when subjected to burial and heating >60degC in the presence of water. Given estimated geothermal gradients on Mars temperatures <60 degC might still be consistent with (but do not require) moderate burial. However, our ability to identify interstratified minerals is greatly limited by the lack of access to traditional treatments methods used in the lab (e.g., ethylene glycol solvation). Our preferred explanation for the origin of trioctahedral smectites in Sheepbed mudstone is in situ production via reaction of olivine, water and Si-bearing amorphous material, an important mudstone component detected by XRD. Elevated levels of magnetite in the Sheepbed and the trioctahedral monomineralic nature of the clay minerals support this model. These observations, combined with previous studies of olivine stability, support the persistence of circum-neutral hydrous conditions for thousands of years at YKB.

Bristow, Thomas↗
NASA NTRS2014

Paleoenvironmental Implications of Clay Minerals at Yellowknife Bay, Gale Crater, Mars

The Mars Science Laboratory (MSL) Rover, Curiosity spent approx 150 sols at Yellowknife Bay (YKB) studying a section of fluvio-lacustrine sedimentary rocks (with potential indications of volcanic influence), informally known as the Yellowknife Bay formation. YKB lies in a distal region of the Peace Vallis alluvial fan, which extends from the northern rim of Gale Crater toward the dune field at the base of Mt Sharp. Sedimentological and stratigraphic observations are consistent with the Yellowknife Bay formation being part of a distal fan deposit, which could be as young as middle Hesperian to even early Amazonian in age (approx. 3.5 to 2.5 Ga). The Yellowknife Bay formation hosts a unit of mudstone called the Sheepbed member. Curiosity obtained powdered rock samples from two drill holes in the Sheepbed Member, named John Klein and Cumberland, and delivered them to instruments in Curiosity. Data from CheMin, a combined X-ray diffraction (XRD)/X-ray fluorescence instrument (XRF), has allowed detailed mineralogical analysis of mudstone powders revealing a clay mineral component of approx. 20 wt.% in each sample. The clay minerals are important indicators of paleoenvironmental conditions and sensitive recorders of post-depositional alteration processes. The XRD pattern of John Klein reveals a 02l band consistent with a trioctahedral phyllosilicate. A broad peak at approx. 10A with a slight inflexion at approx. 12A indicates the presence of 2:1 type clay minerals in the John Klein sample. The trioctahedral nature of the clay minerals, breadth of the basal reflection, and presence of a minor component with larger basal spacing suggests that John Klein contains a trioctahedral smectite (probably saponite), whose interlayer is largely collapsed because of the low-humidity conditions. The XRD patterns show no evidence of corrensite (mixed-layer chlorite/smectite) or chlorite, which are typical diagenetic products of trioctahedral smectites when subjected to burial and heating >60 C in the presence of water. Given estimated geothermal gradients on Mars temperatures <60 C might still be consistent with (but do not require) moderate burial. However, our ability to identify interstratified minerals is greatly limited by the lack of access to traditional treatments methods used in the lab (e.g., ethylene glycol solvation). Our preferred explanation for the origin of trioctahedral smectites in Sheepbed mudstone is in situ production via reaction of olivine, water and Si-bearing amorphous material, an important mudstone component detected by XRD. Elevated levels of magnetite in the Sheepbed and the trioctahedral monomineralic nature of the clay minerals support this model. These observations, combined with previous studies of olivine stability, support the persistence of circum-neutral hydrous conditions for thousands of years at YKB.

MSL↗
NASA NTRS1978

On the nature and origin of comets and their contribution to planets

The rotation of cometary nuclei and certain properties of cometary ices are discussed. Observations show that comets were formed at extremely low temperatures and probably contain amorphous ices that give off exothermal energy on mild heating. While a large comet has a slow rotation period, many smaller typical comets appear to be rotating rapidly, indicating that encounters among them were frequent during formation. An estimate for the product of the relaxation time for encounters and the mean space density near the end of comet formation is presented, and a time scale of approximately 1,000,000 yr for comet accumulation is suggested. Some probable and possible contribution of comets to the solar system are summarized.

Whipple, F. L.↗
NASA NTRS1959

Preliminary Study of Capsule Recovery for the First Series of Project Mercury Orbital Flights

This report contains the results of a preliminary study of the search and. recovery operations required. for the safe and. expeditious return of the Mercury Recovery Capsule in the first series of orbital flights. The study is concerned primarily with the high-probability impact areas in the Atlantic Ocean. Emphasis is placed on safe recovery within reasonable time at least cost. A preliminary study of this nature is not able to provide final answers to all of the problems; the report instead constitutes a "first look" at the overall operation. Much of the report is therefore devoted to basic data, the building blocks from which recovery systems can be assembled and evaluated. These include the performance characteristics, reliability, and cost of the vehicles and equipment which may be used, and their compatibility with one another, with the capsule, and with the expected environment. The availability of vehicles and equipment has also been considered., although it is appreciated. that this may change from week to week where the forces are drawn from the military services. consideration of alternative vehicles, equipments, and systems, and their evaluation from the standpoint of effectiveness and. cost. While the equipment considered. is generally expected to be operational throughout 1960, consideration is also given to more advanced schemes which might effect reductions in recovery time, cost, or dependence upon the military forces.

Source record↗
NASA NTRS1985

Microwave responses of the western North Atlantic

Features and objects in the Western North Atlantic Ocean - the Eastern Seaboard of the United States - are observed from Earth orbit by passive microwaves. The intensities of their radiated flux signatures are measured and displayed in color as a microwave flux image. The features of flux emitting objects such as the course of the Gulf Stream and the occurrence of cold eddies near the Gulf Stream are identified by contoured patterns of relative flux intensities. The flux signatures of ships and their wakes are displayed and discussed. Metal data buoys and aircraft are detected. Signal to clutter ratios and probabilities of detection are computed from their measured irradiances. Theoretical models and the range equations that explain passive microwave detection using the irradiances of natural sources are summarized.

Stacey, J. M.↗
NASA NTRS1988

Issues on the use of meta-knowledge in expert systems

Meta knowledge is knowledge about knowledge; knowledge that is not domain specific but is concerned instead with its own internal structure. Several past systems have used meta-knowledge to improve the nature of the user interface, to maintain the knowledge base, and to control the inference engine. More extensive use of meta-knowledge is probable for the future as larger scale problems are considered. A proposed system architecture is presented and discussed in terms of meta-knowledge applications. The principle components of this system: the user support subsystem, the control structure, the knowledge base, the inference engine, and a learning facility are all outlined and discussed in light of the use of meta-knowledge. Problems with meta-constructs are also mentioned but it is concluded that the use of meta-knowledge is crucial for increasingly autonomous operations.

Facemire, Jon↗
NASA NTRS1989

Reliability-based failure analysis of brittle materials

The reliability of brittle materials under a generalized state of stress is analyzed using the Batdorf model. The model is modified to include the reduction in shear due to the effect of the compressive stress on the microscopic crack faces. The combined effect of both surface and volume flaws is included. Due to the nature of fracture of brittle materials under compressive loading, the component is modeled as a series system in order to establish bounds on the probability of failure. A computer program was written to determine the probability of failure employing data from a finite element analysis. The analysis showed that for tensile loading a single crack will be the cause of total failure but under compressive loading a series of microscopic cracks must join together to form a dominant crack.

Powers, Lynn M.↗
NASA NTRS1990

Real-time adaptive aircraft scheduling

One of the most important functions of any air traffic management system is the assignment of ground-holding times to flights, i.e., the determination of whether and by how much the take-off of a particular aircraft headed for a congested part of the air traffic control (ATC) system should be postponed in order to reduce the likelihood and extent of airborne delays. An analysis is presented for the fundamental case in which flights from many destinations must be scheduled for arrival at a single congested airport; the formulation is also useful in scheduling the landing of airborne flights within the extended terminal area. A set of approaches is described for addressing a deterministic and a probabilistic version of this problem. For the deterministic case, where airport capacities are known and fixed, several models were developed with associated low-order polynomial-time algorithms. For general delay cost functions, these algorithms find an optimal solution. Under a particular natural assumption regarding the delay cost function, an extremely fast (O(n ln n)) algorithm was developed. For the probabilistic case, using an estimated probability distribution of airport capacities, a model was developed with an associated low-order polynomial-time heuristic algorithm with useful properties.

Kolitz, Stephan E.↗