Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NIOBATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Unraveling dielectric and electrical properties of ultralow-loss lead magnesium niobate titanate pyrochlore dielectric thin films for capacitive applications

PbO-MgO-Nb{sub 2}O{sub 5}-TiO{sub 2} (PMNT) pyrochlore thin films were prepared on Pt-coated silicon substrates by radio-frequency magnetron sputtering and postdeposition annealing method. Very interestingly, these pyrochlore-structured PMNT thin films exhibited ultralow dielectric losses, with a typical loss tangent as low as 0.001, and relatively high dielectric constants, typically {epsilon}{sub r{approx}}170. It was found that the relative permittivity slightly but continuously increased upon cooling without any signature of a structural phase transition, displaying a quantum paraelectriclike behavior; meanwhile, the PMNT pyrochlore thin films did not show any noticeable dielectric dispersion in the real part of permittivity over a wide temperature range (77-400 K). Their dielectric responses could, however, be efficiently tuned by applying a dc electric field. A maximum applied bias field of 1 MV/cm resulted in a {approx}20% tunability of the dielectric permittivity, giving rise to a fairly large coefficient of the dielectric nonlinearity, {approx}2.5x10{sup 9} J C{sup -4} m{sup -5}. Moreover, the PMNT pyrochlore films exhibited superior electrical insulation properties with a relatively high breakdown field (E{sub breakdown{approx}}1.5 MV/cm) and a very low leakage current density of about 8.2x10{sup -7} A/cm{sup 2} obtained at an electric field intensity as high as 500 kV/cm.

36 MATERIALS SCIENCE↗

Growth mechanism of photoreduced silver nanostructures on periodically proton exchanged lithium niobate: Time and concentration dependence

Photodeposition of metallic nanostructures onto ferroelectric surfaces, which have been chemically patterned using a proton exchange process, has recently been demonstrated. By varying the molar concentration of the AgNO{sub 3} solution and the illumination time, one can determine the initial nucleation sites, control the rate of nucleation and the height of silver nanostructures formed, and study the mechanisms by which these processes occurs. The nanoparticles are found to deposit preferentially in the boundary between ferroelectric and proton exchanged regions, in an area proton exchanged via lateral diffusion under the masking layer used for chemical patterning, consistent with our previous results. Using a short illumination time (3 min), we are able to determine that the initial nucleation of the silver nanostructure, having a width of 0.17 {+-} 0.02 {mu}m and a height of 1.61 {+-} 0.98 nm, occurs near the edge of the reactive ion etched area within this lateral diffusion region. Over longer illumination times (15 min), we find that the silver deposition has spread to a width of 1.29 {+-} 0.06 {mu}m, extending across the entire lateral diffusion region. We report that at a high molar concentration of AgNO{sub 3} (10{sup -2} M), the amount of silver deposition for 5 min UV illumination is greater (2.88 {+-} 0.58 nm) compared to that at low (10{sup -4} M) concentrations (0.78 {+-} 0.35 nm), however, this is not the case for longer time periods. With increasing illumination time (15 min), experiments at 10{sup -4} M had greater overall deposition, 6.90 {+-} 1.52 nm, compared to 4.50 {+-} 0.76 nm at 10{sup -2} M. For longer exposure times (30 min) at 10{sup -2} M, the nanostructure height is 4.72 {+-} 0.59 nm, suggesting a saturation in the nanostructure height. The results are discussed in terms of the electric double layer that forms at the crystal surface. There is an order of magnitude difference between the Debye lengths for 10{sup -2} and 10{sup -4} M solutions, i.e., 3.04 vs. 30.40 nm, which suggests the Debye length plays a role in the availability of Ag{sup +} ions at the surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polaronic conduction and Anderson localization in reduced strontium barium niobate

Electron transport mechanisms in reduced Sr 0.5 Ba 0.5 Nb 2 O 6 (SBN50) are investigated from ~100 to 955 K through an analysis of the electrical conductivity (σ) and the Seebeck coefficient (S) with respect to temperature (T). Notably, experimental evidence is presented that supports a scenario of Anderson localization below 600 K and carrier excitation across a mobility edge at higher temperature. As a relaxor ferroelectric, stoichiometric SBN has intrinsic disorder associated with both the distribution of Sr/Ba vacancies and the formation of polarized nanoregions. The removal of oxygen through reduction generates conduction electrons in SBN. At the lowest temperatures measured (100–155 K), the electrical conductivity exhibits a temperature dependence characteristic of variable range hopping, followed by a transition to small polaron hopping at intermediate temperatures (250–545 K). In both the variable range and small polaron hopping regimes, a semiconductor-like temperature dependence of the electrical conductivity ( dσ/dT > 0) was observed. However, above 615 K, dσ/dT decreases dramatically and eventually becomes metal-like ( dσ/dT < 0). Concomitantly, the Seebeck coefficient exhibits a linear dependence on lnT from 615 to 955 K with the same slope (~104 μ V/K) for both polycrystalline SBN50 and single crystalline SBN61 (both reduced), indicating a similar, constant density of states near the Fermi level for both compositions. Here, the application of Seebeck coefficient theory to this inherently disordered material reveals that the excitation of carriers across a mobility edge is likely responsible for the change in dσ/dT at high temperature. Such findings may have a significant impact in the field of conductive ferroelectrics.

36 MATERIALS SCIENCE↗

Comparison of amplification via the acousto-electric effect of Rayleigh and Leaky-SAW modes in a monolithic surface InP:InGaAs/lithium niobate heterostructure

This work demonstrates a monolithic surface acoustic wave amplifier fabricated by state-of-the-art heterogenous integration of a III-V InGaAs-based epitaxial material stack and LiNbO 3 . We compare amplification of Raleigh-SAW and leaky-SAW modes on a on Y-cut, X-propagating delay line amplifier. Due to the superior properties of the materials employed, we observe a net terminal gain of 3dB for an LSAW overtone mode This platform enables further advances in active and non-reciprocal piezoelectric acoustic devices.

42 ENGINEERING↗

Neutron diffraction and μ SR studies of two polymorphs of nickel niobate NiNb 2 O 6

Neutron diffraction and muon spin relaxation (μSR) studies are presented in this paper for the newly characterized polymorph of NiNb 2 O 6 (β-NiNb 2 O 6 ) with space group P4 2 /n and μSR data only for the previously known columbite structure polymorph with space group Pbcn. The magnetic structure of the P4 2 /n form was determined from neutron diffraction using both powder and single-crystal data. Powder neutron diffraction determined an ordering wave vector → k=( 1 / 2 , 1 / 2 , 1 / 2 ). Single-crystal data confirmed the same → k vector and showed that the correct magnetic structure consists of antiferromagnetically coupled chains running along the a or b axis in adjacent Ni 2+ layers perpendicular to the c axis, which is consistent with the expected exchange interaction hierarchy in this system. The refined magnetic structure is compared with the known magnetic structures of the closely related trirutile phases, NiSb 2 O 6 and NiTa 2 O 6 . μSR data finds a transition temperature of T N ~15K for this system, while the columbite polymorph exhibits a lower T N =5.7(3) K. Our μSR measurements also allowed us to estimate the critical exponent of the order parameter β for each polymorph. We found β =0.25(3) and 0.16(2) for the β and columbite polymorphs, respectively. The single-crystal neutron scattering data give a value for the critical exponent β =0.28(3) for β-NiNb 2 O 6 , in agreement with the μSR value. While both systems have β values less than 0.3, which is indicative of reduced dimensionality, this effect appears to be much stronger for the columbite system. Finally, in other words, although both systems appear to be well described by S=1 spin chains, the interchain interactions in the β polymorph are likely much larger.

36 MATERIALS SCIENCE↗

Surface-modified, dye-sensitized niobate nanosheets enabling an efficient solar-driven Z-scheme for overall water splitting

While dye-sensitized metal oxides are good candidates as H 2 evolution photocatalysts for solar-driven Z-scheme water splitting, their solar-to-hydrogen (STH) energy conversion efficiencies remain low because of uncontrolled charge recombination reactions. Here, we show that modification of Ru dye–sensitized, Pt-intercalated HCa 2 Nb 3 O 10 nanosheets ( Ru /Pt/HCa 2 Nb 3 O 10 ) with both amorphous Al 2 O 3 and poly(styrenesulfonate) (PSS) improves the STH efficiency of Z-scheme overall water splitting by a factor of ~100, when the nanosheets are used in combination with a WO 3 -based O 2 evolution photocatalyst and an I 3 - /I - redox mediator, relative to an analogous system that uses unmodified Ru /Pt/HCa 2 Nb 3 O 10 . By using the optimized photocatalyst, PSS/ Ru /Al 2 O 3 /Pt/HCa 2 Nb 3 O 10 , a maximum STH of 0.12% and an apparent quantum yield of 4.1% at 420 nm were obtained, by far the highest among dye-sensitized water splitting systems and comparable to conventional semiconductor-based suspended particulate photocatalyst systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗