Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NASA Standards”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

A reconnaissance space sensing investigation of crustal structure for a strip from the eastern Sierra Nevada to the Colorado Plateau

The author has identified the following significant results. An operational technique for producing high resolution false color composites of ERTS-1 MSS imagery has been developed. The technique uses standard NASA (NDPF) or EROS black/white data products, and permits a broad range of control on composite color balance and contrast range. The use of an additive color viewer has proven valuable for determining the optimum color balance of composites for effective interpretation. The compositing technique is adaptable for effective interpretation. The technique is adaptable to data from a variety of multispectral imaging systems, including multi-seasonal and multipolarization data. A 50 mile north-trending linear anomaly recognized in ERTS-1 MSS imagery west of Goldfield, Nevada has been confirmed as a steeply west-dipping normal fault, here termed the Paymaster Fault. This structure trends southward from the General Thomas Hills along Paymaster Valley and the east side of Clayton Valley into the Palmetto Mountains. There, it terminates against a less pronounced east-trending transverse anomaly which is also believed to be fault controlled. The Paymaster Fault is the most prominent of several large normal faults which terminate southward against this transverse anomaly.

Liggett, M. A.↗
NASA NTRS1974

Multispectral combination and display of ERTS-1 data

Standard NASA color composites combine the most relevant 3 bands from the 4 MSS bands available. An alternate approach is to extract the principal components of the data by a linear transformation of the 4 bands. This approach leads to a low dimensionality representation of ERTS-1 data with the least degradation, in the mean square sense, of the radiometric accuracy. The technique has been applied with success to ERTS-1 MSS data for several geographic areas in California. For all examples considered the mean square representation error is less than one percent. By combining this dimensionality reduction which our previous results on image enhancement for visual display, color composites are obtained which contain and display most of the information provided by the ERTS-1 sensors.

Algazi, V. R.↗
NASA NTRS1973

Application of selection techniques to electric-propulsion options on an advanced synchronous satellite

This paper addresses the comparison of several candidate auxiliary-propulsion systems and system combinations for an advanced synchronous satellite. Economic selection techniques, evolved at the Jet Propulsion Laboratory, are used as a basis for system option comparisons. Electric auxiliary-propulsion types considered include pulsed plasma and ion bombardment, with hydrazine systems used as a state-of-the-art reference. Current as well as projected electric-propulsion system performance data are used, as well as projected hydrazine system costs resulting from NASA standardization program projections.

Holcomb, L. B.↗
NASA NTRS1976

HEAO Block 2 study executive summary

An executive summary is presented of a preliminary study done on several potential High Energy Astronomy Observatory (HEAO) missions which are follow-on missions to the currently defined HEAO program. The purpose was to examine several typical missions and determine the relative complexities associated with them. The four payloads investigated were (1) a 1.2 m Diameter X-ray Telescope observatory, (2) a Large Area Moderate Angular Resolution (LAMAR) observatory, (3) a cosmic ray observatory, and (4) a gamma ray observatory. Each of the four observatories was considered a national facility. Low cost approaches were stressed throughout, with considerable use of HEAO Block I experience and designs effected to provide a high degree of confidence that such approaches were achievable. The use of the Multi-Mission Spacecraft (MMS) and the HEAO Block I spacecraft was considered as a result of this low cost emphasis. Also, NASA standard components were considered, where applicable.

Source record↗
NASA NTRS1975

A cost effective data management subsystem for the LST

The paper outlines the approach used in developing DMS (Data Management Subsystem) alternatives for the LST (Large Space Telescope) and in selecting the concept considered to be the most cost effective means of implementing the LST DMS requirements. Two candidate DMS concepts are discussed: a functionally integrated and a functionally separated one. For the single vehicle LST program, separation of the DMS functions best provides high reliability, operations flexibility, minimal interface complexity, and the least complex software development and verification task. The use of available hardware and NASA standard components is stressed.

Dougherty, J. A.↗
NASA NTRS1976

The preliminary design of an orbiting observatory - The Space Telescope

The systems and subsystems of the Space Telescope proposed for an orbiting observatory to be launched by the Space Shuttle in the 1980s are described. The structural design is simple and based on existing technologies for high reliability. Provisions are made for on-orbit servicing and maintenance. All deployable appendages are designed for manual override to insure retrieval and return of the Space Telescope to earth for major refurbishing, which should occur at intervals of not less than six years. Low performance risk, passive techniques are used in the thermal control subsystem to provide a cold-biased design with thermostatically controlled heaters to adjust temperature. The electrical power system utilizes NASA Standard Hardware - 50 ampere hour nickel-cadmium battery cells, a standard power regulator unit, and a flight-proven flexible rollup solar array with high-efficiency (12.5 per cent) silicon solar cells. The communication subsystem is designed for compatibility with the Tracking and Data Relay Satellite System. The pointing control system will have a maximum line of sight variation of 0.007 arc seconds. The telescope optics are a Ritchey-Chretien version of the Cassegrain configuration.

Timmons, K. P.↗
NASA NTRS1975

Landsat 2 on-board computer

The Landsat Spacecraft Project (formerly known as ERTS) was based essentially on the use of Nimbus spacecraft hardware. It was soon recognized that the availability of only 30 stored command locations (which were sufficient for the Nimbus mission) would limit the operation of the Landsat 1 mission with much higher power sensors, recorders, and wideband communications being cycled on and off throughout the orbit. The solution described is a simple memory with hard wired logic, of a design that can interface with the existing hardware, without modifications. The design was implemented using an existing APO (Advanced Onboard Processor) and a 4096 word X 18 bit plated wire memory. (The AOP has been subsequently designated the NASA Standard Spacecraft Computer.)

Lesko, J. G., Jr.↗
NASA NTRS1976

Fixed-point single-precision estimation

Monte Carlo simulation of autonomous orbit determination has validated the use of an 18-bit NASA Standard Spacecraft Computer (NSSC) for the extended Kalman filter. Dimensionally consistent scales are chosen for all variables in the algorithm, such that nearly all of the onboard computation can be performed in single precision without matrix square root formulations. Allowable simplifications in algorithm implementation and practical means of ensuring convergence are verified for accuracies of a few km provided by star/vertical observations

Thompson, E. H.↗
NASA NTRS1975

The evolution of the SEASAT imaging radar

The paper describes the design parameters and development of a synthetic aperture radar for use on the SEASAT spacecraft. This imaging radar is designed to operate at altitudes of 800 km with an orbital inclination of 108 deg, a nominal resolution of 25 m, and a swath width of 100 km. The design evolved from planetary imaging radar studies conducted over many years where an L-band imaging radar was developed and tested on aircraft flights as a prototype system to map the surface of Venus. A solid-state transmitter is used where the pulse repetition frequency is a function of altitude and will be about 2kHz for a 12-m long antenna. The receiver consists of the receiver protector, input filters, the gain control, and the RF amplifier. The ground station uses the standard NASA receiver with a 10-m antenna. The correlator, either optical or digital, must be able to compensate for the pitch and yaw variations of the spacecraft as well as the inherent effective yaw caused by the rotation of the earth, and extract the range curvature and range walk effects.

Brown, W. E., Jr.↗
NASA NTRS1976

Biomedical Experiments Scientific Satellite /BESS/

The Biomedical Experiments Scientific Satellite (BESS) program is proposed to provide a long-duration, earth-orbiting facility to expose selected specimens in a series of biomedical experiments through the 1980's. Launched and retrieved by the Space Transportation System, the fully reusable, free-flying BESS will contain all systems necessary to conduct a six-month to one-year spaceflight mission. The spacecraft system will consist of a large pressurized experiment module and a standard NASA service module currently conceived as the Goddard Multi-Mission Spacecraft (MMS). The experiment module will contain the life-support systems, waste management system, specimen-holding facilities, and monitoring, evaluating, and data-handling equipment. Although a variety of specimens will be flown in basic biological and medical studies, the primate was taken as the principal design driver since it has a maximal life-support demand.

Berry, W. E.↗
NASA NTRS1978

A study of 'onboard' data processing for typical astrophysics payloads

The data, signal flow, and ground processing requirements for a typical set of X-ray and gamma-ray experiments were examined. A set of algorithms for ground processing were derived and these were taken as requirements imposed on 'onboard' spacecraft computers. Five types of CPU microprocessors were evaluated and compared with one another to determine the degree to which the data processing could be performed onboard the spacecraft. These included the NASA Standard Spacecraft Computer (NSSC-1), the Z-80, a Z-80 augmented with an auxiliary fast multiply chip, and an advanced augmented Z-80 with virtually unlimited memory. These CPU were investigated when used in a centralized mode, an experiment dedicated mode, and a hybrid of the first two modes. It was found that the use of onboard processing can significantly reduce downlink data rates for typical payloads, and may lead to greater efficiency of operation. Quantitative data for gamma-ray and X-ray payloads will be presented, and the results of the analysis discussed.

Stout, C. M.↗
NASA NTRS1978

Space Shuttle SRM Ignition System

This paper presents the Space Shuttle SRM Ignition System, which consists of a large solid propellant main igniter, a small solid propellant initiating igniter and an electromechanical safety and arming device containing two NASA Standard Initiators and a B-KNO3 pyrotechnic booster charge. In development motors, the igniter also has a valve through which CO2 is injected for post-firing quench of the SRM. The igniter has redundant, testable seals at all pressurized joints and three major reusable components; the case, the adapter, and the S&A device. Two development problem areas are discussed. One problem area was transverse mode combustion instability in the main igniter with maximum amplitude of 340 psi peak-to-peak at a frequency of 1500 Hz, which was reduced by a propellant grain configuration change and a change from a 2% aluminum content propellant to a formulation containing 10% aluminum. The other problem area was an excessively rapid rise of thrust in the SRM, which was reduced by reducing the igniter mass flow rate. This mass flow rate reduction was accomplished by removing portions of the grain starpoints in the head end.

Bolieau, C. W.↗
NASA NTRS1978

Digital pointing control

The digital pointing control system developed for the Space Shuttle Data Bus is discussed. The device, which interfaces with NASA standard sensor units, contains a front panel controller, a development system to load, inspect, print, and store the program and data, and a 'test jig' to provide closed-loop controller operation. The system is described with particular reference to the tracker-gyro interfaces, the control algorithms and compensation procedures, Kalman-estimation filtering, the proportional power output, and the discrete output capability. The results of simulation studies are presented and the development status is noted.

Studer, P. A.↗
NASA NTRS1977

A GSTDN/TDRSS compatible RF system for the Solar Maximum Mission /SMM/

The Solar Maximum Mission (SMM) is a major NASA observatory to be launched in late 1979. SMM will be supported by NASA's existing Ground Spaceflight Tracking and Data Network (GSTDN) and the planned Tracking and Data Relay Satellite System (TDRSS). Design of a GSTDN/TDRSS compatible RF system for SMM poses multiple problems related to the complex nature of the observatory command, telemetry, and tracking support requirements and the fundamental differences in signal design, antenna characteristics, data rates, and link performance criteria for GSTDN vs. TDRSS support. The RF system described in this paper achieves full compatibility with a minimum of hardware complexity by use of an integrated antenna system, the NASA standard S-Band transponder, and utilization of both the single access and multiple access support capabilities of the TDRSS to handle both real time data and tape recorder dumps.

Heffernan, P. J.↗
NASA NTRS1978

A class of programmable satellite receivers

The primary purpose of programmable satellite receivers is to provide flexibility in application through digital control of the important functions of the receiver. This permits the acquisition and demodulation of medium to very low data rates in widely varying communications environments and over a wide range of modulation schemes. The first application of the programmable concept is in the high-reliability, low-power NASA Standard Command Detector Unit. A second programmable receiver has been designed and breadboarded for the Jupiter Orbiter Probe or Galileo mission.

Klare, S. W.↗
NASA NTRS1980

SUMC fault tolerant computer system

The results of the trade studies are presented. These trades cover: establishing the basic configuration, establishing the CPU/memory configuration, establishing an approach to crosstrapping interfaces, defining the requirements of the redundancy management unit (RMU), establishing a spare plane switching strategy for the fault-tolerant memory (FTM), and identifying the most cost effective way of extending the memory addressing capability beyond the 64 K-bytes (K=1024) of SUMC-II B. The results of the design are compiled in Contract End Item (CEI) Specification for the NASA Standard Spacecraft Computer II (NSSC-II), IBM 7934507. The implementation of the FTM and memory address expansion.

Source record↗
NASA NTRS1979

Performance advantages of dynamically tuned gyroscopes in high accuracy spacecraft pointing and stabilization applications

The paper compares and describes the advantages of dry tuned gyros over floated gyros for space applications. Attention is given to describing the Teledyne SDG-5 gyro and the second-generation NASA Standard Dry Rotor Inertial Reference Unit (DRIRU II). Certain tests which were conducted to evaluate the SDG-5 and DRIRU II for specific mission requirements are outlined, and their results are compared with published test results on other gyro types. Performance advantages are highlighted.

Irvine, R.↗
NASA NTRS1980

Planetary spacecraft - SEPS interface design

The interactions between a spacecraft which would rendezvous with the comet Tempel II, the stage, and the mission design are summarized along with solar electric propulsion system design issues. Attention is given to data communication, the spacecraft pointing control system, spacecraft power, plasma interactions, the release of a probe to study the comet Halley, and thruster usage. It was concluded that for a planetary mission design using a low-thrust stage, the control of the mission should reside in the payload spacecraft and that the power should be provided by the stage; the NASA standard 28 VDC bus is recommended.

Pless, L. C.↗