Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Molecular Spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Balancing solvation: stabilizing lithium metal batteries via optimized cosolvents for ionic-liquid electrolytes

In this study, we examined three cosolvents with distinct solvation capabilities for ionic-liquid electrolytes based on 1-methyl-1-propyl pyrrolidinium bis(fluorosulfonyl)imide (Py13FSI). We demonstrate that 1,1,1-trifluoro-2-(2-(2-(2,2,2-trifluoroethoxy)ethoxy)ethoxy)ethane (FDG) notably enhances the cycle life of Py13FSI-based electrolytes, outperforming 1,1,2,2-tetrafluoroethyl 2,2,3,3-tetrafluoropropylether (TTE) and diglyme (DG). Electrochemical and surface analyses showed that this improvement could be attributed to the formation of a favorable cathode interphase, promoting efficient Li+ transport with reduced overpotential. Spectroscopic techniques (FTIR, Raman, and NMR spectroscopy) and molecular dynamics simulations revealed that cosolvents with varying solvation abilities can influence the solvation structures in Py13FSI-based electrolytes. The mild solvating strength and lithium stability of FDG are key contributors to its effectiveness. Conversely, DG, a strong solvating solvent, destabilized the Py13FSI-DG electrolyte at the lithium metal anode, while TTE, a non-solvating solvent, failed to enhance lithium transport or form a stable cathode interphase. Our findings highlight that balanced solvation exerted by the cosolvents is critical for forming a stable electrolyte–cathode interface, potentially through FSI decomposition. This study offers valuable insights into the development of durable ionic-liquid electrolytes, emphasizing the importance of selecting cosolvents with optimal solvation properties.

Li, Xinlin [Argonne National Laboratory (ANL), Arg↗

Solid-state NMR and theoretical studies illuminate lanthanum borohydride C–H borylation catalysts confined within a zeolite

Zeolite-supported single-site lanthanum borohydride catalyzes C–H borylation of hydrocarbons, while the related silica-supported complex is inactive under comparable conditions. The identical composition of support-La(BH 4 ) 2 (THF) 2 sites in the two materials implies that the support bestows underlying structural features onto La that are required for bond activation catalysis, yet the nature of these effects, which could include confinement effects and/or electronic modulation of the site itself, remains to be identified. We used solid-state nuclear magnetic resonance (SSNMR) spectroscopy and molecular dynamics simulations with machine-learning potentials (ML-MD) to analyze the electronic and steric effects imparted by the faujasite support on the precatalyst structure to correlate with catalytic activity. ML-MD simulations show that THF dissociates from La under the influence of confinement, leading to coordinatively unsaturated sites in the zeolite pores. Then, the La complex grafts on Brønsted acid sites (La BAS ) or isolated silanols (La SiO ) or remains physisorbed in the zeolite pores. Catalytic studies comparing compounds supported on faujasite zeolites containing or lacking BAS and/or silanols show that only the former complexes lead to active sites, ruling out confinement as the sole requirement for catalysis. The DFT calculations and ML-MD simulations also reveal that the surface-lanthanum coordination number is two (bidentate) for La BAS , with the metal center forming long, flexible bonds to two oxygen atoms bridging Si and Al, but only one oxygen atom (monodentate) for La SiO . The structure–activity relationship identifies confined, BAS-grafted species as active sites and provides important guidance for the design of enhanced atom-efficient catalysts.

Cui, Jinlei [Ames Laboratory, and Iowa State Univ.↗

Computational optimal transport for molecular spectra: The fully discrete case

In this study, the use of computational optimal transport is investigated as a tool for comparing two molecular spectra. Unlike other techniques for comparing molecular spectra in a pattern-recognition framework, transport distances simultaneously encode information about line positions and intensities. In addition, it is shown that transport distances are a useful alternative to Euclidean distances as Euclidean distances are based on line-by-line comparisons, while transport distances reflect broader features of molecular spectra and adequately compare spectra with different resolutions. This paper includes a tutorial on the use of optimal transport and investigates several well-chosen examples to illustrate the utility of computational optimal transport for comparing molecular spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analytical harmonic vibrational frequencies with VV10-containing density functionals: Theory, efficient implementation, and benchmark assessments

VV10 is a powerful nonlocal density functional for long-range correlation that is used to include dispersion effects in many modern density functionals, such as the meta-generalized gradient approximation (mGGA), B97M-V, the hybrid GGA, ωB97X-V, and the hybrid mGGA, ωB97M-V. While energies and analytical gradients for VV10 are already widely available, this study reports the first derivation and efficient implementation of the analytical second derivatives of the VV10 energy. The additional compute cost of the VV10 contributions to analytical frequencies is shown to be small in all but the smallest basis sets for recommended grid sizes. Here, this study also reports the assessment of VV10-containing functionals for predicting harmonic frequencies using the analytical second derivative code. The contribution of VV10 to simulating harmonic frequencies is shown to be small for small molecules but important for systems where weak interactions are important, such as water clusters. In the latter cases, B97M-V, ωB97M-V, and ωB97X-V perform very well. The convergence of frequencies with respect to the grid size and atomic orbital basis set size is studied, and recommendations are reported. Finally, scaling factors to allow comparison of scaled harmonic frequencies with experimental fundamental frequencies and to predict zero-point vibrational energy are presented for some recently developed functionals (including r2SCAN, B97M-V, ωB97X-V, M06-SX, and ωB97M-V).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reconciling calculations and measurements of inverse bremsstrahlung absorption

It was recently shown that the use of Coulomb logarithms appropriate for bremsstrahlung radiation (rather than transport processes) along with corrections for the Langdon effect and ion screening reproduced measurements of collisional absorption in well-characterized underdense plasmas [D. Turnbull et al., Phys. Rev. Lett. 130, 145103 (2023)]. However, it was recognized at the time that the use of the standard absorption-reduction factor from Langdon's seminal paper was inconsistent with the use of Coulomb logarithms that are thermally averaged over a Maxwellian electron-velocity distribution function. A more accurate approach would be to average over the expected super-Gaussian distribution function while accounting for the Gaunt factor's velocity dependence, which somewhat mitigates the Langdon effect; however, at that time, this theory matched the data less well. This conflict is now eliminated with the additional insight that the ionization state of our mid-Z ion species (when present) was lower than had been assumed, as evidenced by the Thomson-scattering data and time-dependent Cretin simulations. We are now able to show that an improved treatment of the Langdon effect provides the best match to data. Otherwise, the prior conclusions remain unchanged. We also show an example of the substantial expected impact to the absorption rate in calculations of indirect-drive hohlraums.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hierarchical Ion Interactions in the Direct Air Capture of CO 2 at Air/Aqueous Interfaces

The direct air capture (DAC) of CO 2 using aqueous solvents is plagued by slow kinetics and interfacial barriers that limit effectiveness in combating climate change. Functionalizing air/aqueous surfaces with charged amphiphiles shows promise in accelerating DAC; however, insight into these interfaces and how they evolve in time remains poorly understood. Specifically, competitive ion interactions between DAC reagents and reaction products feedback onto the interfacial structure, thereby modulating interfacial chemical composition and overall function. In this work, we probe the role of glycine amino acid anions (Gly - ), an effective CO 2 capture reagent, that promotes the organization of cationic oligomers at air/aqueous interfaces. These surfaces are probed with vibrational sum frequency generation spectroscopy and molecular dynamics simulations. Our findings demonstrate that the competition for surface sites between Gly - and captured carbonaceous anions (HCO 3 - , CO 3 2 -, carbamates) drives changes in surface hydration, which in turn tunes oligomer ordering. This phenomenon is related to a hierarchical ordering of anions at the surface that are electrostatically attracted to the surface and their ability to compete for interfacial water. These results point to new ways to tune interfaces for DAC via stratification of ions based on relative surface propensities and specific ion effects.

54 ENVIRONMENTAL SCIENCES↗

Detection of atomic oxygen and its electronic coherence decays using time-resolved ultrafast coherent Raman scattering

We report the detection of atomic oxygen and quantitative measurements of its electronic Raman coherence decays in flames and low-temperature plasmas using time-resolved hybrid femtosecond/picosecond coherent anti-Stokes Raman scattering (CARS). Atomic oxygen was detected using the Raman transitions between the spin–orbit coupled triplet ground states. Atomic oxygen was generated in an H 2 /O 2 /Ar diffusion flame and an O 2 /Ar pulsed plasma discharge. Single exponential decays were observed for the O( 3 P 2 )–O( 3 P 1 ) Raman transition at 158.3 cm −1 and the O( 3 P 2 )–O( 3 P 0 ) Raman transition at 227 cm −1 . From the decay measurements, the atomic O Raman linewidths were obtained from 25 to 150 Torr in non-equilibrium plasma and at 760 Torr in a flame. Enhanced signal-to-noise ratios (SNRs) of atomic oxygen and atomic to molecular oxygen signal contrasts were obtained by taking advantage of electronic triplet coherence beating. Enhancement of up to seven times in the atomic O SNR was observed. Furthermore, we also found that the dephasing rates of O 2 (v = 0–3, N = 37) were similar, which provides evidence for the assumption that vibrational excitation does not influence the dephasing of diatomic molecular rotational CARS transitions.

Atomic and molecular spectroscopy↗

Strain-induced topological transitions in epitaxial films of cadmium arsenide

Strain in epitaxial thin films can have a profound influence on their electronic bands. Here, we investigate the influence of epitaxial strains on the electronic states of (001)-oriented cadmium arsenide (Cd 3 As 2 ) thin films, which are two-dimensional topological insulators. Cd 3 As 2 films were grown coherently on Al 1−x In x Sb buffer layers with varying degrees of lattice mismatch to Cd 3 As 2 , producing in-plane stresses that ranged from compressive to tensile. Using magneto-transport measurements of the Landau levels of the lowest subbands, we show that films under compression remain in the two-dimensional topological insulator state, while a sufficiently large tensile stress induces a transition to a topologically trivial phase. These results qualitatively agree with expectations from theoretical models for these films. At the topological transition, the gap avoids completely closing, and we discuss possible origins.

36 MATERIALS SCIENCE↗

How cholesterol stiffens unsaturated lipid membranes

Cholesterol is an integral component of eukaryotic cell membranes and a key molecule in controlling membrane fluidity, organization, and other physicochemical parameters. It also plays a regulatory function in antibiotic drug resistance and the immune response of cells against viruses, by stabilizing the membrane against structural damage. While it is well understood that, structurally, cholesterol exhibits a densification effect on fluid lipid membranes, its effects on membrane bending rigidity are assumed to be nonuniversal; i.e., cholesterol stiffens saturated lipid membranes, but has no stiffening effect on membranes populated by unsaturated lipids, such as 1,2-dioleoyl- sn -glycero-3-phosphocholine (DOPC). This observation presents a clear challenge to structure–property relationships and to our understanding of cholesterol-mediated biological functions. Here, using a comprehensive approach—combining neutron spin-echo (NSE) spectroscopy, solid-state deuterium NMR ( 2 H NMR) spectroscopy, and molecular dynamics (MD) simulations—we report that cholesterol locally increases the bending rigidity of DOPC membranes, similar to saturated membranes, by increasing the bilayer’s packing density. All three techniques, inherently sensitive to mesoscale bending fluctuations, show up to a threefold increase in effective bending rigidity with increasing cholesterol content approaching a mole fraction of 50%. Our observations are in good agreement with the known effects of cholesterol on the area-compressibility modulus and membrane structure, reaffirming membrane structure–property relationships. The current findings point to a scale-dependent manifestation of membrane properties, highlighting the need to reassess cholesterol’s role in controlling membrane bending rigidity over mesoscopic length and time scales of important biological functions, such as viral budding and lipid–protein interactions.

59 BASIC BIOLOGICAL SCIENCES↗

Nucleation of Dislocations in 3.9 nm Nanocrystals at High Pressure

As circuitry approaches single nanometer length scales, it has become important to predict the stability of single nanometer-sized metals. The behavior of metals at larger scales can be predicted based on the behavior of dislocations, but it is unclear if dislocations can form and be sustained at single nanometer dimensions. Here, we report the formation of dislocations within individual 3.9 nm Au nanocrystals under nonhydrostatic pressure in a diamond anvil cell. We used a combination of x-ray diffraction, optical absorbance spectroscopy, and molecular dynamics simulation to characterize the defects that are formed, which were found to be surface-nucleated partial dislocations. These results indicate that dislocations are still active at single nanometer length scales and can lead to permanent plasticity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasmon coupling in topological insulator multilayers

Topological insulators (TIs) house two-dimensional Dirac plasmons on their surfaces. In TI thin films, plasmons on the top and bottom surfaces couple electrostatically, giving rise to an acoustic and an optical plasmon mode. By extension, a superlattice comprising TI layers and trivially-insulating layers could house multiple complex plasmon modes which could be used to create a new type of Dirac metamaterial. In this paper, we synthesize TI superlattices, fabricate them into stripe arrays, characterize their optical and plasmonic properties, and model the samples using transfer matrices. Furthermore, we excite plasmon modes that couple to the phonons in the superlattice, resulting in hybrid plasmon phonon polaritons. These modes are modeled using an analytical Fano resonance model and the extracted resonant positions are reproduced by transfer matrix modeling. We also excite an epsilon-near-zero mode in the top dielectric material (Bi 0.5 In 0.5 ) 2 Se 3 . Understanding the behavior of the polariton modes in this complex system will lend insight into the many-body interaction in low-dimensional systems.

36 MATERIALS SCIENCE↗

Pump-probe spectroscopy of chiral vibrational dynamics

A planar molecule may become chiral upon excitation of an out-of-plane vibration, changing its handedness during half a vibrational period. When exciting such a vibration in an ensemble of randomly oriented molecules with an infrared laser, half of the molecules will undergo the vibration phase-shifted by π compared to the other half, and no net chiral signal is observed. This symmetry can be broken by exciting the vibrational motion with a Raman transition in the presence of a static electric field. Subsequent ionization of the vibrating molecules by an extreme ultraviolet pulse probes the time-dependent net handedness via the photoelectron circular dichroism. Our proposal for pump-probe spectroscopy of molecular chirality, based on quantum-chemical theory and discussed for the example of the carbonyl chlorofluoride molecule, is feasible with current experimental technology.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Two-dimensional silk

Despite the promise of silk-based devices, the inherent disorder of native silk limits performance. Here, we report highly ordered two-dimensional silk fibroin (SF) films grown epitaxially on van der Waals (vdW) substrates. Using atomic force microscopy, nano–Fourier transform infrared spectroscopy, and molecular dynamics, we show that the films consist of lamellae of SF molecules that exhibit the same secondary structure as the nanocrystallites of native silk. Increasing the SF concentration results in multilayers that grow either by direct assembly of SF molecules into the lamellae or, at high concentrations, along a two-step pathway beginning with a disordered monolayer that then crystallizes. Scanning Kelvin probe measurements show that these films substantially alter the surface potential; thus, they provide a platform for silk-based electronics on vdW solids.

36 MATERIALS SCIENCE↗

The Reactivity and Structural Dynamics of Supported Metal Nanoclusters Using Electron Microscopy, in-situ X-Ray Spectroscopy, Electronic Structure Theories, and Molecular Dynamics Simulations

This research will provide new methods to determine the structures and compositions of heterogeneous catalysts as they exist in reaction conditions. The new tools will make it possible to understand how extremely small material structures—ones in a size range spanning from single atoms to larger polyatomic clusters—make it possible to carry out highly selective chemical transformations required to synthesize useful materials as well as for efficient energy production and utilization. The tools will make it possible to see how the atomic structures of catalytic materials evolve over time under the conditions of their use, and in this way provide understandings to guide the design of new energy-efficient catalysts. The work will make it possible to answer long standing questions that include the following. How does catalyst structure help guide molecules along specific reaction pathways? What are the important intermediates involved in these transformations? How do the structures and reactivity of catalytic materials, as well as the chemistry of their interfaces, vary with reaction conditions? Is it possible to develop new catalytic materials using new knowledge of the active structures and reaction mechanisms? The work will provide heretofore unavailable experimental tools that can be applied in advanced programs of research addressing such questions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗