Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mechanical Behaviour”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Integrated ab initio modelling of atomic ordering and magnetic anisotropy for design of FeNi-based magnets

We describe an integrated modelling approach to accelerate the search for novel, single-phase, multicomponent materials with high magnetocrystalline anisotropy (MCA). For a given system we predict the nature of atomic ordering, its dependence on the magnetic state, and then proceed to describe the consequent MCA, magnetisation, and magnetic critical temperature (Curie temperature). Crucially, within our modelling framework, the same ab initio description of a material’s electronic structure determines all aspects. We demonstrate this holistic method by studying the effects of alloying additions in FeNi, examining systems with the general stoichiometries Fe 4 Ni 3 X and Fe 3 Ni 4 X, for additives including X = Pt, Pd, Al, and Co. The atomic ordering behaviour predicted on adding these elements, fundamental for determining a material’s MCA, is rich and varied. Equiatomic FeNi has been reported to require ferromagnetic order to establish the tetragonal L1 0 order suited for significant MCA. Our results show that when alloying additions are included in this material, annealing in an applied magnetic field and/or below a material’s Curie temperature may also promote tetragonal order, along with an appreciable effect on the predicted hard magnetic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Data for "Integrated ab initio modelling of atomic order and magnetic anisotropy for rare-earth-free magnet design: effects of alloying additions in L1 0 FeNi."

We describe an integrated modelling approach to accelerate the search for novel, single-phase, multicomponent materials with high magnetocrystalline anisotropy (MCA). For a given system we predict the nature of atomic ordering, its dependence on the magnetic state, and then proceed to describe the consequent MCA, magnetisation, and magnetic critical temperature (Curie temperature). Crucially, within our modelling framework, the same ab initio description of a material’s electronic structure determines all aspects. We demonstrate this holistic method by studying the effects of alloying additions in FeNi, examining systems with the general stoichiometries Fe 4 Ni 3 X and Fe 3 Ni 4 X, for additives including X = Pt, Pd, Al, and Co. The atomic ordering behaviour predicted on adding these elements, fundamental for determining a material’s MCA, is rich and varied. Equiatomic FeNi has been reported to require ferromagnetic order to establish the tetragonal L1 0 order suited for significant MCA. Our results show that when alloying additions are included in this material, annealing in an applied magnetic field and/or below a material’s Curie temperature may also promote tetragonal order, along with an appreciable effect on the predicted hard magnetic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Distinguishing localization from chaos: Challenges in finite-size systems

Highlights: • Provides an overview of the current understanding of the many-body localization phase transition. • Discusses the subtleties of finite-size scaling near this transition • Assesses the implications of these subtleties for numerical studies of spin chains. • Explores scaling of diagnostics in models with known localization transitions. • Presents suggestions for future numerical work. We re-examine attempts to study the many-body localization transition using measures that are physically natural on the ergodic/quantum chaotic regime of the phase diagram. Using simple scaling arguments and an analysis of various models for which rigorous results are available, we find that these measures can be particularly adversely affected by the strong finite-size effects observed in nearly all numerical studies of many-body localization. This severely impacts their utility in probing the transition and the localized phase. In light of this analysis, we discuss a recent study (Šuntajs et al., 2020) of the behaviour of the Thouless energy and level repulsion in disordered spin chains, and its implications for the question of whether MBL is a true phase of matter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Modelling Hyperglycaemia in an Epithelial Membrane Model: Biophysical Characterisation

Biomimetic models are valuable platforms to improve our knowledge on the molecular mechanisms governing membrane-driven processes in (patho)physiological conditions, including membrane permeability, transport, and fusion. However, current membrane models are over simplistic and do not include the membrane’s lipid remodelling in response to extracellular stimuli. Our study describes the synthesis of glycated dimyristoyl-phosphatidylethanolamine (DMPE-glyc), which was structurally characterised by mass spectrometry (ESI-MS) and quantified by NMR spectroscopy to be further incorporated in a complex phospholipid (PL) membrane model enriched in cholesterol (Chol) and (glyco)sphingolipids (GSL) designed to mimic epithelial membranes (PL/Chol/GSL) under hyperglycaemia conditions. Characterisation of synthesised DMPE-glyc adducts by tandem mass spectrometry (ESI-MS/MS) show that synthetic DMPE-glyc adducts correspond to Amadori products and quantification by 1H NMR spectroscopy show that the yield of glycation reaction was 8%. The biophysical characterisation of the epithelial membrane model shows that excess glucose alters the thermotropic behaviour and fluidity of epithelial membrane models likely to impact permeability of solutes. The epithelial membrane models developed to mimic normo- and hyperglycaemic scenarios are the basis to investigate (poly)phenol-lipid and drug–membrane interactions crucial in nutrition, pharmaceutics, structural biochemistry, and medicinal chemistry.

Reis, Ana (ORCID:0000000245379902)↗
DOE OSTI2024

Simulation, Structural, Thermal and Mechanical Properties of the FeTiTaVW High Entropy Alloy

Developing new materials to be applied in extreme environments is an opportunity and a challenge for the future. High entropy alloys are new materials that seem promising approaches to work in nuclear fusion reactors. In this work, FeTaTiVW high entropy alloys were developed and characterized with Molecular Dynamic and Hybrid Molecular Dynamic Monte Carlo simulations. The simulation results show that phase separation originates a lower potential energy per atom and a high level of segregation compared to those of a uniform solid solution. Moreover, the experimental diffractogram of the milled powder shows the formation of a body-centred cubic-type structure and the presence of TiO2. In addition, the microstructure of the consolidated material evidenced three phases: W-rich, Ti-rich, and a phase with all the elements. This phase separation observed in the microstructure agrees with the Hybrid Molecular Dynamic Monte Carlo simulation. Moreover, the consolidated material’s thermal conductivity and specific heat are almost constant from 25 °C to 1000 °C, and linear expansion increases with increasing temperature. On the other hand, specific heat and thermal expansion values are in between CuCrZr and W values (materials chosen for the reactor walls). The FeTaTiVW high entropy alloy evidences a ductile behaviour at 1000 °C. Therefore, the promising thermal properties of this system can be attributed to the multiple phases and systems with different compositions of the same elements, which is exciting for future developments.

Martins, Ricardo (ORCID:0000000177685704)↗
NASA NTRS1997

Root cytoskeleton: its role in perception of and response to gravity

We have critically evaluated the possible functions of the plant cytoskeleton in root gravisensing and graviresponse and discussed the evidence that microtubules (MTs) and actin microfilaments (MFs) do not control differential cell growth during bending of roots. On the other hand, MF and MT networks are envisaged to participate in gravisensing because of the mechanical properties of the cytoskeletal structures that interconnect plant cell organelles with the plasma membrane. In restrained gravisensing, forces are suggested to be transmitted to membranes because large-scale gravity-dependent repositioning of organelles is effectively prevented due to the cytoskeleton-mediated anchorage of their envelopes at the plasma membrane. From the cytoskeletal point of view, we can also envisage an unrestrained gravity sensing when cytoskeletal tethers are not strong enough to preserve the tight control over distribution of organelles and the latter, if heavy enough, are allowed to sediment towards the physical bottom of cells. This situation obviously occurs in root cap statocytes because these uniquely organized cells are depleted of prominent actin MF bundles, endoplasmic MT arrays, and ER elements in their internal cytoplasm. Nevertheless, indirect evidence clearly indicates that sedimented root cap statoliths are enmeshed within fine but dynamic MF networks and that their behaviour is obviously under, at least partial, cytoskeletal control. The actomyosin-enriched domain among and around amyloplasts is proposed to increase the perception of gravity due to the grouping effect of sedimenting statoliths. Cytoskeletal links between myosin-rich statoliths, and cell peripheries well equipped with dense cortical MTs, membrane-associated cytoskeleton, as well as with ER elements, would allow efficient restrained gravisensing only at the statocyte cell cortex. As a consequence of cytoskeletal depletion in the internal statocyte cytoplasm and bulk sedimentation of large amyloplasts, restrained gravisensing is spatially restricted to the bottom of the statocyte irrespective of whether roots are vertical or horizontal. This spatial aspect allows for efficient gravisensing via amplification of gravity-induced impacts on the cellular architecture, a phenomenon which is unique to root cap statocytes.

NASA Discipline Plant Biology↗
DOE OSTI2025

Many-body interference in kagome crystals

When electrons in metals act collectively, they enable emergent phenomena and electronic functionalities that transcend the behaviour of individual particles. Coherent collective charge motion has so far been observed primarily in superconductors, in which it arises with the formation of Cooper pairs. Here we report experimental evidence for coherent charge transport in the normal state of the kagome metal CsV 3 Sb 5 , indicative of a distinct collective electronic state. The signature is a set of magnetoresistance oscillations in mesoscopic crystalline pillars under in-plane magnetic fields, with a periodicity determined by the number of magnetic flux quanta h/e threading between adjacent kagome layers—effectively forming an interlayer Aharonov–Bohm interferometer. The cooperative nature of this phenomenon is evidenced by a non-analytic angular dependence characterized by abrupt transitions between discrete oscillation frequencies and its persistence over length scales that exceed the single-particle mean free path. Notably, the oscillation amplitude matches other anomalous electronic responses reported in CsV 3 Sb 5 , pointing to an underlying mechanism that establishes intrinsic coherence. These findings shed new light on the debated nature of correlated order in kagome metals and establish CsV 3 Sb 5 as a platform for realizing long-range coherent charge transport in the absence of superconductivity—opening new directions for coherence in correlated electron systems beyond conventional models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Pressure-induced order–disorder transitions in β-In 2 S 3 : an experimental and theoretical study of structural and vibrational properties

We report this joint experimental and theoretical study of the structural and vibrational properties of β-In 2 S 3 upon compression shows that this tetragonal defect spinel undergoes two reversible pressure-induced order–disorder transitions up to 20 GPa. We propose that the first high-pressure phase above 5.0 GPa has the cubic defect spinel structure of α-In 2 S 3 and the second high-pressure phase ($\phi$-In 2 S 3 ) above 10.5 GPa has a defect α-NaFeO 2 -type (R$\bar{3}$) structure. This phase, related to the NaCl structure, has not been previously observed in spinels under compression and is related to both the tetradymite structure of topological insulators and to the defect LiTiO 2 phase observed at high pressure in other thiospinels. Structural characterization of the three phases shows that α-In 2 S 3 is softer than β-In 2 S 3 while $\phi$-In 2 S 3 is harder than β-In 2 S 3 . Vibrational characterization of the three phases is also provided, and their Raman-active modes are tentatively assigned. Our work shows that the metastable α phase of In 2 S 3 can be accessed not only by high temperature or varying composition, but also by high pressure. On top of that, the pressure-induced β–α–$\phi$ sequence of phase transitions evidences that β-In 2 S 3 , a B III 2 X V 3 compound with an intriguing structure typical of A II B III 2 X VI 4 compounds (intermediate between thiospinels and ordered-vacancy compounds) undergoes: (i) a first phase transition at ambient pressure to a disordered spinel-type structure (α-In 2 S 3 ), isostructural with those found at high pressure and high temperature in other B III 2 X V 3 compounds; and (ii) a second phase transition to the defect α-NaFeO 2 -type structure ($\phi$-In 2 S 3 ), a distorted NaCl-type structure that is related to the defect NaCl phase found at high pressure in A II B III 2 X VI 4 ordered-vacancy compounds and to the defect LiTiO 2 -type phase found at high pressure in A II B III 2 X VI 4 thiospinels. This result shows that In 2 S 3 (with its intrinsic vacancies) has a similar pressure behaviour to thiospinels and ordered-vacancy compounds of the A II B III 2 X VI 4 family, making β-In 2 S 3 the union link between such families of compounds and showing that group-13 thiospinels have more in common with ordered-vacancy compounds than with oxospinels and thiospinels with transition metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Complex magnetic ordering in EuAl 4 –A 151 Eu Mössbauer study

151 Eu Mössbauer spectroscopy has been used to investigate the behaviour of EuAl 4 through the four magnetic transitions that occur below 16 K. We find clear evidence for the first transition (T N1 , the onset of order) where an incommensurate modulated magnetic structure appears, and the third (T N3 ) where the modulation disappears at the tetragonal → orthorhombic structural transition. We see no changes at the lowest transition (T N4 ) but find that the modulation amplitude passes through a maximum at T N2 . Data on the isostructural but magnetically simpler EuGa 4 are also presented for comparison.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Non‐Linear Kinetics of The Lithium Metal Anode on Li 6 PS 5 Cl at High Current Density: Dendrite Growth and the Role of Lithium Microstructure on Creep

Abstract Interfacial instability, viz., pore formation in the lithium metal anode (LMA) during discharge leading to high impedance, current focusing induced solid–electrolyte (SE) fracture during charging, and formation/behaviour of the solid–electrolyte interphase (SEI), at the anode, is one of the major hurdles in the development of solid‐state batteries (SSBs). Also, understanding cell polarization behaviour at high current density is critical to achieving the goal of fast‐charging battery and electric vehicle. Herein, via in situ electrochemical scanning electron microscopy (SEM) measurements, performed with freshly deposited lithium microelectrodes on transgranularly fractured fresh Li6PS5Cl (LPSCl), the LiǀLPSCl interface kinetics are investigated beyond the linear regime. Even at relatively small overvoltages of a few mV, the LiǀLPSCl interface shows non‐linear kinetics. The interface kinetics possibly involve multiple rate‐limiting processes, i.e., ion transport across the SEI and SE|SEI interfaces, as well as charge transfer across the LiǀSEI interface. The total polarization resistance R P of the microelectrode interface is determined to be ≈ 0.8 Ω cm 2 . It is further shown that the nanocrystalline lithium microstructure can lead to a stable LiǀSE interface via Coble creep along with uniform stripping. Also, spatially resolved lithium deposition, i.e., at grain surface flaws, grain boundaries, and flaw‐free surfaces, indicates exceptionally high mechanical endurance of flaw‐free surfaces toward cathodic load (>150 mA cm −2 ). This highlights the prominent role of surface defects in dendrite growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Evidence for equilibrium exciton condensation in monolayer WTe 2

We present evidence that the two-dimensional bulk of monolayer WTe2 contains electrons and holes bound by Coulomb attraction—excitons—that spontaneously form in thermal equilibrium. On cooling from room temperature to 100 K, the conductivity develops a V-shaped dependence on electrostatic doping, while the chemical potential develops a step at the neutral point. These features are much sharper than is possible in an independent-electron picture, but they can be accounted for if electrons and holes interact strongly and are paired in equilibrium. Our calculations from first principles show that the exciton binding energy is larger than 100 meV and the radius as small as 4 nm, explaining their formation at high temperature and doping levels. Below 100 K, more strongly insulating behaviour is seen, suggesting that a charge-ordered state forms. The observed absence of charge density waves in this state is surprising within an excitonic insulator picture, but we show that it can be explained by the symmetries of the exciton wavefunction. Therefore, in addition to being a topological insulator, monolayer WTe2 exhibits strong correlations over a wide temperature range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Quantum dynamics of a nucleon in the Fermi accelerator

Highlights: • In nuclear physics, the Fermi accelerator is a coherent open quantum system. • There is not a true equilibrium for a nucleon‘s mean-energy in the Fermi accelerator. • Occupation of higher energy eigen-states remains even after the mean-energy plateaus. • This work paves the way for work on quantum tunnelling in the Fermi accelerator. The quantum dynamics of a particle in a one-dimensional box with an oscillating wall (the Fermi accelerator) is investigated. The model is applied to the motion of a single nucleon in the mean-field potential of a heavy atomic nucleus whose surface vibrates. By directly solving the time-dependent Schrödinger equation, both the state of the particle and its mean-energy are studied. The effects of the frequency of the wall oscillation on the nucleon’s energy are addressed. Its energy oscillates in phase with the moving wall for all frequencies, showing no chaotic behaviour. There is a large initial peak of the nucleon’s energy as the particle adjusts to the sudden change in the size of the box and a varying relaxation time as it plateaus towards lower energy and a partial equilibrium. Small oscillations in energy continue, since there cannot be a true equilibrium while the wall is moving. The quantum coherence between the different parts of the nucleon’s wave-function in real space is very much preserved. This research lays the foundation for future investigations into quantum tunnelling in the Fermi accelerator.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Magnetisation and magneto-transport measurements on CeBi single crystals

In this study, we report the synthesis of CeBi single crystals out of Bi self-flux and a systematic study of the magnetic and transport properties with varying temperature and applied magnetic fields. From these R(T, H) and M(T, H) data, we could assemble the field-temperature (H⁻T) phase diagram for CeBi and visualise the three-dimensional M⁻T⁻H surface. In the phase diagram, we identify regions with well-defined magnetisation values and identify a new phase region. The magnetoresistance (MR) in the low-temperature regime shows, above 6T a power-law, non-saturated behaviour with large MR (~3 × 10 5 % at 2K and 13.95T), along with Shubnikov–de Haas oscillations. With increasing temperatures, MR decreases, and then becomes negative for T ⪆10 K . This crossover in MR seems to be unrelated to any specific magnetic or metamagnetic transitions, but rather is associated with changing from a low-temperature normal metal regime with little or no scattering from the Ce 3 + moments and an anomalously large MR, to increased scattering from local Ce moments and a negative MR as temperature increases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Multimodal 3D quantification of particle stimulated nucleation in industrially manufactured aluminium AA5182 sheet

Particle stimulated nucleation is a dominant recrystallisation mechanism observed in many industrially relevant aluminium alloys during thermomechanical processing. Here, in this work, we quantify particle stimulated nucleation in 3D in an aluminium AA5182 alloy sheet cold-rolled to 75% thickness reduction. Second phase particles and nuclei are mapped in the same sample volume by conventional laboratory absorption X-ray tomography and synchrotron X-ray Laue micro-diffraction. The large second phase particles are classified as Fe- and Mg-rich phases. It is found that 84% of the nuclei are particle stimulated and 40% of the particles stimulate nucleation. The critical particle diameter is found to be 4 μm. Deviatoric elastic strains are derived from micro-diffraction data and it is found that elastic strains are present in the recrystallised nuclei. The effects of the different particle types, particle clustering, particle size and aspect ratio as well as strain inheritance are discussed. This work provides a full 3D quantification of particle stimulated nucleation behaviour in AA5182 alloy sheet deformed to high strain.

Deviatoric strain↗
DOE OSTI2020

Isothermal oxidation of zirconium using steam

Oxidation of zirconium and its alloys under any atmosphere is generally characterised by a protective and non-protective stage. During the protective stage, the kinetics of oxidation are quasi-parabolic, while the oxide scale formed on the surface of the metal is black, compact, and protective in nature. For the non-protective stage, the oxidation rate becomes linear, while the protective oxide film turns into a deteriorated white scale. Breakaway is known as the transition point from protective to non-protective stage. The actual mechanism leading to breakaway of zirconium is still a matter of controversy, however some of the most common factors affecting breakaway are the following: - Impurities on the metal (Carbon, Oxygen, Nitrogen); - Oxidizing atmosphere (Presence of H{sub 2}O (g) or N{sub 2} (g)); - Sample preparation (Chemically etched or polished); - Temperature (LWR, LOCA). This research investigates the effect of temperature on 'breakaway' when zirconium is oxidized isothermally in steam for 60 min at 800 and 900 deg. C using thermogravimetric and optical microscopic imaging techniques. 1. Steam isothermal oxidations were performed on zirconium at 800 and 900 deg. C using a Thermogravimetric Analyzer (TGA). 2. Log-log plots of mass gain vs time were obtained from thermogravimetric results to calculate the reaction orders (n) and reaction rate constants (K) during oxidation. 3. Results of the kinetics of reaction were correlated with optical microscopic images form Light Microscope (LM) and Scanning Electron Microscope (SEM). Breakaway depends very strongly on temperature. At 800 deg. C, the weight gain followed a cubic-parabolic behaviour with evidence of a protective oxide film. On the other hand, oxidation at 900 deg. C showed signs of breakaway since the oxide film was cracked and oxidation rate was almost linear throughout the reaction.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Demonstration and analysis of volumetric additive manufacturing via sub-orbital spaceflight testing

Computed Axial Lithography (CAL) represents a significant advancement in the emerging field of Volumetric Additive Manufacturing (VAM). CAL addresses key limitations of traditional photopolymer additive manufacturing technologies, by eliminating the need for layering and support structures. Unlike conventional methods, CAL prints components by illuminating all points within a desired geometry simultaneously, using tomographic reconstruction to form the object in a single step. This unique approach eliminates the relative motion between the object and the precursor material, enabling faster printing speeds and reducing the waste associated with support structures. However, CAL parts require post-processing steps before they can be utilized. CAL's core attributes make it particularly suited for In-Space Manufacturing (ISM), due to its fast fabrication times, wide breadth of materials it can use, and minimized footprint. CAL has been successfully demonstrated in microgravity during parabolic flight experiments. However to fully validate and understand CAL's behaviour in microgravity, all manufacturing and post-processing steps must be integrated. In June 2024, we conducted SpaceCAL Mission 3, testing this entire workflow on a suborbital flight aboard Virgin Galactic's SpaceShipTwo. During ~140 s of microgravity, the system autonomously manufactured and post-processed four parts using PEGDA700 resin. Post-flight analysis showed that 2/4 parts were recognisable, while others were distorted due to bubble formation from residual water droplets, off-axis optical aberrations, and non-uniform solvent rinsing. Despite these limitations, this study represents the first integrated CAL workflow in space, providing an initial experimental demonstration and analysis for closed-loop in-space manufacturing.

Waddell, Taylor [Department of Mechanical Engineer↗
DOE OSTI2023

Resurgence, conformal blocks, and the sum over geometries in quantum gravity

In two dimensional conformal field theories the limit of large central charge plays the role of a semi-classical limit. Certain universal observables, such as conformal blocks involving the exchange of the identity operator, can be expanded around this classical limit in powers of the central charge c. This expansion is an asymptotic series, so — via the same resurgence analysis familiar from quantum mechanics — necessitates the existence of non-perturbative effects. In the case of identity conformal blocks, these new effects have a simple interpretation: the CFT must possess new primary operators with dimension of order the central charge. This constrains the data of CFTs with large central charge in a way that is similar to (but distinct from) the conformal bootstrap. We study this phenomenon in three ways: numerically, analytically using Zamolodchikov’s recursion relations, and by considering non-unitary minimal models with large (negative) central charge. In the holographic dual to a CFT2, the expansion in powers of c is the perturbative loop expansion in powers of ћ. So our results imply that the graviton loop expansion is an asymptotic series, whose cure requires the inclusion of new saddle points in the gravitational path integral. In certain cases these saddle points have a simple interpretation: they are conical excesses, particle-like states with negative mass which are not in the physical spectrum but nevertheless appear as non-manifold saddle points that control the asymptotic behaviour of the loop expansion. This phenomenon also has an interpretation in SL(2, R) Chern-Simons theory, where the non-perturbative effects are associated with the non-Teichmüller component of the moduli space of flat connections.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

Optimization of the frequency response of a novel GaAs plasmonic terahertz detector

Previously there was reported a new type of high-speed plasmonic THz detector that can operate at room temperature. As an extension of that work, the sensitivity of the detector was investigated over a wide range of sub-THz frequencies. The measured frequency response is not purely monotonic but exhibits oscillatory behaviour with a number of maxima and minima. Our study reveals that such frequency dependence is caused by the interference of electromagnetic waves inside the detector substrate, as the frequencies of these extrema are found to be governed by the substrate thickness. We demonstrate that sensitivity of this type of detector can be optimized for the desired operating frequency within 0.06–0.7 THz spectrum by adjusting the substrate thickness. We also show that a monotonic frequency response with eliminated minima can be achieved by mounting the detector on a specially designed silicon lens.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗