Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Health and safety evaluation of a modified tunnel borer design for application to single entry coal mine development

A health and safety analysis of a single entry coal tunnel borer system is given. The results of the health analysis indicated that while the tunnel borer design offered improvements in dust control through the use of water sprays, a higher face ventilation rule, and the application of spalling rather than the conventional grinding process, it interjected an additional mutagen and toxic compound into the environment through the use of shotcrete. The tunnel borer system easily conformed with the prescribed fatality limit, but exceeded the required limits for disabling and overall injuries. It also exhibited projected disabling and overall injury rates considerably higher than existing continuous mining injury rates. Consequently, the tunnel borer system was not considered an advanced system.

Zimmerman, W. F.↗
NASA NTRS1984

Automated Coal-Mine Shuttle Car

Cable-guided car increases efficiency in underground coal mines. Unmanned vehicle contains storage batteries in side panels for driving traction motors located in wheels. Batteries recharged during inactive periods or slid out as unit and replaced by fresh battery bank. Onboard generator charges batteries as car operates.

Collins, E. R., Jr.↗
NASA NTRS1984

Shuttle-Car System for Continuous Mining

Buffer storage catches coal production between loadings. Telescoping reservoir filled continuously. With tailgate down, shuttle car slides into place along sides and bottom of reservoir. Reservoir retracts along inside of car and out through tailgate, leaving coal behind in car. System not restricted to coal mining and may prove economical for hauling other solid materials.

Collins, E. R., Jr.↗
NASA NTRS1984

Continuous Mining Machine

Mining machine contains two maneuverable drums for cutting coal and rock intrusion in coal seam.

Knurovsky, T.↗
NASA NTRS1985

Roof Shield for Advance and Retreat Mining

Shield sections change their configuration to suit mining mode. Articulation cylinders raise rear shield to advance position, and locking cylinders hold it there. To change to retreat position articulation cylinders lower shield. Locking pins at edge of outermost shield plate latch shield to chock base. Shield accommodates roof heights ranging from 36 to 60 inches (0.9 to 1.52 meters).

Lewis, E. V.↗
NASA NTRS1987

Molded Concrete Center Mine Wall

Proposed semiautomatic system forms concrete-foam wall along middle of coal-mine passage. Wall helps support roof and divides passage into two conduits needed for ventilation of coal face. Mobile mold and concrete-foam generator form sections of wall in place.

Lewis, E. V.↗
NASA NTRS1988

Mining for helium: Site selection and evaluation

Part of the University of Wisconsin study of the feasibility of recovering He-3 from the moon is selection and evaluation of potential mining sites. Selection and evaluation are based primarily on salient findings by investigators: (1) Regoliths from areas underlain by highland materials contain less than 20 wppm He; (2) Regoliths of certain maria or parts of maria also contain less than 20 wppm He, but mare regoliths at the Apollo 11 and 17 sites contain 25 to 49 wppm He; (3) The helium content of a regolith is a function of its composition; and (4) Helium is concentrated in the -50 micron size fractions of regoliths. In site selection, the concern is with the compositions of lunar regoliths, in particular with their titanium contents. It is widely accepted that compositions of mare regoliths are controlled by the nature of the underlying basalts from which the regoliths are largely derived. The distribution and extent of the three groups of basalts and the regoliths derived from them are the first basis for site selection and evaluation. Other considerations are briefly discussed.

Cameron, Eugene N.↗
NASA NTRS1988

An assessment of AVIRIS data for hydrothermal alteration mapping in the Goldfield Mining District, Nevada

Airborne Visible and Infrared Imaging Spectrometer (AVIRIS) data were acquired over the Goldfield Mining District, Nevada, in September 1987. Goldfield is one of the group of large epithermal precious metal deposits in Tertiary volcanic rocks, associated with silicic volcanism and caldera formation. Hydrothermal alteration consists of silicification along fractures, advanced agrillic and argillic zones further away from veins and more widespread propylitic zones. An evaluation of AVIRIS data quality was performed. Faults in the data, related to engineering problems and a different behavior of the instrument while on-board the U2, were encountered. Consequently, a decision was made to use raw data and correct them only for dark current variations and detector read-out-delays. New software was written to that effect. Atmospheric correction was performed using the flat field correction technique. Analysis of the data was then performed to extract spectral information, mainly concentrating on the 2 to 2.45 micron window, as the alteration minerals of interest have their distinctive spectral reflectance features in this region. Principally kaolinite and alunite spectra were clearly obtained. Mapping of the different minerals and alteration zones was attempted using ratios and clustering techniques. Poor signal-to-noise performance of the instrument and the lack of appropriate software prevented the production of an alteration map of the area. Spectra extracted locally from the AVIRIS data were checked in the field by collecting representative samples of the outcrops.

Carrere, Veronique↗
NASA NTRS1989

Comparison of Landsat Thematic Mapper and Geophysical and Environmental Research Imaging Spectrometer data for the Cuprite mining district, Esmeralda, and Nye counties, Nevada

Landsat TM images and Geophysical and Environmental Research Imaging Spectrometer (GERIS) data were analyzed for the Cuprite mining district and compared to available geologic and alteration maps of the area. The TM data, with 30 m resolution and 6 broadbands, allowed discrimination of general mineral groups. Clay minerals, playa deposits, and unaltered rocks were mapped as discrete spectral units using the TM data, but specific minerals were not determined, and definition of the individual alteration zones was not possible. The GERIS, with 15 m spatial resolution and 63 spectral bands, permitted construction of complete spectra and identification of specific minerals. Detailed spectra extracted from the images provided the ability to identify the minerals alunite, kaolinite, hematite, and buddingtonite by their spectral characteristics. The GERIS data show a roughly concentrically zoned hydrothermal system. The mineralogy mapped with the aircraft system conforms to previous field and multispectral image mapping. However, identification of individual minerals and spatial display of the dominant mineralogy add information that can be used to help determine the morphology and genetic origin of the hydrothermal system.

Kierein-Young, Kathryn S.↗
NASA NTRS1990

Mapping alteration in the Goldfield Mining District, Nevada, with the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS)

Analysis of the data acquired by the Airborne Visible/IR Imaging Spectrometer over the Goldfield Mining District, Nevada, demonstrates the unique capabilities of high resolution imaging spectrometers for alteration mapping and identification of mineralogy. The study focuses on the 2-2.45 micron window, as alteration minerals of interest have their distinctive spectral reflectance features in this region. An attempt was made to map the spatial distribution of the individual minerals and produce a mixture maps showing their relative abundance on a pixel-by-pixel basis, focussing on selected subareas. Software and SNR performances limited success in detailed mapping.

Carrere, Veronique↗
NASA NTRS1991

Mining the air - Resources of other worlds may reduce mission costs

It is proposed that the mining of resources on another planet to support operations there and also to provide a means for the return trip to earth provides a less expensive way to send humans beyond low earth orbit to live on the moon and to explore Mars. Since a large fraction of any chemical propellant combination is the oxidizer that burns with the fuel to generate the rocket jet, and for life support, the generation of oxygen from any of its atmospheric or mineral compounds is a valuable capability. Such materials include the lunar minerals ilmenite and anorthite, Martian permafrost, water ice at the Martian poles, and atmospheric carbon dioxide on Mars. The possibilities of developing such technologies are discussed and the prospects of developing building materials for such facilities from local resources are considered. The role of the Space Engineering Research Center at the University of Arizona in exploring the use of local planetary resources is noted.

Ramohalli, Kumar↗
NASA NTRS1992

Lunar mining of oxygen using fluorine

An important aspect of lunar mining will be the extraction of volatiles, particularly oxygen, from lunar rocks. Thermodynamic data show that oxygen could readily be recovered by fluorination of abundant lunar anorthite, CaAl2Si2O8. Fluorine is the most reactive element, and the only reagent able to extract 100 percent of the oxygen from any mineral, yet it can safely be stored or reacted in nickel or iron containers. The general fluorination reaction, mineral + 2F2 = mixed fluorides = O2, has been used for more than 30 years at a laboratory scale by stable-isotope geochemists. For anorthite, metallic Al and Si may be recovered from the mixed fluorides by Na-reduction, and CaO via exchange with Na2O; the resulting NaF may be recycled into F2 and Na by electrolysis, using lanthanide-doped CaF2 as the inert anode.

Burt, Donald M.↗
NASA NTRS1993

Production of Ultrafine, High-purity Ceramic Powders Using the US Bureau of Mines Developed Turbomill

Turbomilling, an innovative grinding technology developed by the U.S. Bureau of Mines in the early 1960's for delaminating filler-grade kaolinitic clays, has been expanded into the areas of particle size reduction, material mixing, and process reaction kinetics. The turbomill, originally called an attrition grinder, has been used for particle size reduction of many minerals, including natural and synthetic mica, pyrophyllite, talc, and marble. In recent years, an all-polymer version of the turbomill has been used to produce ultrafine, high-purity, advanced ceramic powders such as SiC, Si3N4, TiB2, and ZrO2. In addition to particle size reduction, the turbomill has been used to produce intimate mixtures of high surface area powders and whiskers. Raw materials, TiN, AlN, and Al2O3, used to produce a titanium nitride/aluminum oxynitride (TiN/AlON) composite, were mixed in the turbomill, resulting in strength increases over samples prepared by dry ball milling. Using the turbomill as a leach vessel, it was found that 90.4 pct of the copper was extracted from the chalcopyrite during a 4-hour leach test in ferric sulfate versus conventional processing which involves either roasting of the ore for Cu recovery or leaching of the ore for several days.

Hoyer, Jesse L.↗
NASA NTRS1995

Machine learning for a Toolkit for Image Mining

A prototype user environment is described that enables a user with very limited computer skills to collaborate with a computer algorithm to develop search tools (agents) that can be used for image analysis, creating metadata for tagging images, searching for images in an image database on the basis of image content, or as a component of computer vision algorithms. Agents are learned in an ongoing, two-way dialogue between the user and the algorithm. The user points to mistakes made in classification. The algorithm, in response, attempts to discover which image attributes are discriminating between objects of interest and clutter. It then builds a candidate agent and applies it to an input image, producing an 'interest' image highlighting features that are consistent with the set of objects and clutter indicated by the user. The dialogue repeats until the user is satisfied. The prototype environment, called the Toolkit for Image Mining (TIM) is currently capable of learning spectral and textural patterns. Learning exhibits rapid convergence to reasonable levels of performance and, when thoroughly trained, Fo appears to be competitive in discrimination accuracy with other classification techniques.

Delanoy, Richard L.↗
NASA NTRS1997

Mining the Mars Atmosphere

A series of concepts have been developed to mine the atmosphere of Mars and process it to extract or generate compressed carbon dioxide, compressed buffer gas mixtures of nitrogen and argon, water, oxygen, carbon monoxide, and/or carbon. Such products can be of use to science instruments, robotic, and human missions. The products can be for utility purposes, life support, propulsion (both interplanetary and on the planet's surface), and power generation.

Finn, John E.↗
NASA NTRS1999

Lunar Polar Ice: Methods for Mining the New Resource for Exploration

The presence of ice in permanently shadowed depressions near the lunar poles and determination of its properties will significantly influence both the near- and long-term prospects for lunar exploration and development. Since data from the Lunar Prospector spacecraft indicate that water ice is likely present (the instrument measures hydrogen which strongly suggests the presence of water), it is important to understand how to extract it for beneficial use, as well as how to preserve it for scientific analysis. Two types of processes can be considered for the extraction of water ice from the lunar poles. In the first case, energy is transported into the shadowed regions, ice is processed in-situ, and water is transported out of the cold trap. In the second case, ice-containing regolith can be mined in the cold trap, transported outside the cold trap, and the ice extracted in a location with abundant solar energy. A series of conceptual implementations has been examined and criteria have been developed for the selection of systems and subsystems for further study.

Gustafson, Robert J.↗
NASA NTRS1999

Lunar Polar Ice: Methods for Mining the New Resource for Exploration

The presence of ice in permanently shadowed depressions near the lunar poles and determination of its properties will significantly influence both the near- and long-term prospects for lunar exploration and development. Since data from the Lunar Prospector spacecraft indicate that water ice is likely present (the instrument measures hydrogen strongly suggests the presence of water), it is important to understand how to extract it for beneficial use, as well as how to preserve it for scientific analysis. Two types of processes can be considered for the extraction of water ice from the lunar poles. In the first case, energy is transported into the shadowed regions, ice is constrain models of impacts on the lunar surface and processed in-situ, and water is transported out of the cold trap. In the second case, ice-containing regolith can be mined in the cold trap, transported outside the cold trap, and the ice extracted in a location with abundant solar energy. A series of conceptual implementations has been examined and criteria have been developed for the selection of systems and subsystems for further study.

Gustafson, Robert J.↗
NASA NTRS1990

Remote Detection and Mapping of Supergene Iron Oxides in the Cripple Creek Mining District, Colorado

The Geophysical and Environmental Research Imaging Spectrometer (GERIS) was flown over the Cripple Creek mining district in south-central Colorado to improve the geological understanding of the district. As part of the study, an airborne mapping technique was developed for the discrimination of the ferric iron minerals hematite, goethite, and jarosite, minerals often important indicators of the distribution of economic mineralization. A software technique was developed which uses the binary encoding of spectral slopes to identify the mineral hematite from the group goethite/jarosite. Mixtures of hematite and goethite can also be detected with GERIS data. The study included district-wide field mapping and spectral measurements to evaluate the accuracy of the image classifications. The ARC/INFO geographic information system (GIS) was a useful tool which allowed quantitative comparison of the field mapping and GERIS image data sets. The study results demonstrate the ability to discriminate individual iron minerals using imaging spectroscopy, and the development of a rapid mapping technique useful in the reconnaissance stage of minerals exploration.

Taranik, D. L.↗