SEARCH · Engineering Papers

Results for “MATRICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1979

A computer program to generate equations of motion matrices, L217 (EOM). Volume 2: Supplemental system design and maintenance document

The equations of motion program L217 (EOM) is described. The program formulates the matrix coefficients for a second order linear differential equation which describes the motion of an airplane relative to its level equilibrium flight condition. Aerodynamic data from FLEXSTAB or Doublet Lattice (L216) programs are used to derive the equations for quasi-steady or complete unsteady aerodynamics.

Clemmons, R. E.↗

NASA NTRS1978

New cyanate and cyanamide resins as composite matrices

The synthesis, polymerization, and laminate properties of two dicyanates, copolymers thereof, and a dicyanamide were studied. The effect of humidity aging (322 K (49 C), 95% relative humidity) and also aging at 505 K (232 C) in circulating air on the RT and elevated temperature properties of HT-S and T-300 unidirectional laminates was determined.

Hergenrother, P. M.↗

NASA NTRS1981

Calculating linear A, B, C, and D matrices from a nonlinear dynamic engine simulation

Digital program DYGABCD generates linear state-space models for simulating turbofan and turbojet engines over complete range of power settings and flight conditions. Program is written in FORTRAN IV for batch execution and is implemented on IBM 360-series computer.

Geyser, L. C.↗

NASA NTRS1980

Absorption and resonance Raman spectra of Pb2, Pb3 and Pb4 in xenon matrices

Lead metal was vaporized and trapped in solid xenon at 12K. Electronic absorption and resonance Raman spectra were recorded of the resulting matrix, which was shown to contain Pb2, Pb3, and possibly Pb4 molecular species. The vibrational frequency for Pb2 is determined to be 108/cm for the ground state, with a dissociation energy of 82000/cm. Ad3h symmetry is indicated for the Pb3 species, with nu sub 1=117/cm and nu sub 2 = 96 /cm. The existence of Pb4 is suggested by a fundamental and overtone of 111/cm spacing.

Stranz, D. D.↗

NASA NTRS1980

Spectroscopic determination of the in-situ composition of epoxy matrices in glass fiber reinforced composites

Computerized infrared analysis is applied to the characterization of a glass-reinforced crosslinked polyester. The method of factor analysis determines the number of independent components which constitute the polymeric matrix. Subsequently, the spectra of those components are fitted by a least-squares criterion to spectra of the multicomponent matrix, or, if the glass spectrum is included as an additional component, to the spectra of composites. The least-squares coefficients yield the matrix composition in terms of the initial reactant composition and the extent of crosslinking.

Antoon, M. K.↗

NASA NTRS1981

Spectroscopic determination of the in-situ composition of epoxy matrices in glass-fiber-reinforced composites

Antoon, M. K.↗

NASA NTRS1982

Nonequilibrium material effects on the behavior of polymeric composite matrices and their related composites

The effects of physical aging on the material properties of some linear and network macromolecular glasses are discussed. The free volume concept is used to describe this behavior. The effect of physical aging on properties of some uniaxial graphite/fiber epoxy resin composites is investigated using stress relaxation in both tensile and flexural modes. The matrix polymers used were resins both of which are based on a 4,4-methylenedianiline derivative of epichlorohydrin with diamino diphenyl sulfone (DDS) as the curing agent. The matrix resin, as used in the practical application in composites, not fully cured and the glass transition of the network was dependent on the curing schedule. The physical aging of the bulk crosslinked epoxy was found to depend on the annealing temperature, and the T sub g of the resin. The physical aging of the composite, monitored by the stress relaxation method, was found to be dependent on the testing direction.

Wilkes, G. L.↗

NASA NTRS1982

A new LL3 chondrite, Allan Hills A79003, and observations on matrices in ordinary chondrites

Allan Hills A79003 is an LL3 chondrite with a petrologic subtype of 3.4 + or - 0.2. Contrary to previous suggestions, it is not paired with other Allan Hills specimens. It contains haxonite, (Fe,Ni)23C6; shock-melted, 'fizzed' metal-troilite intergrowths; and translucent, glassy-looking Huss matrix (fine-grained, Fe-rich silicate matrix), in addition to the normal opaque and recrystallized varieties of Huss matrix. Some chondrules are partly coated with opaque matrix, others with translucent matrix. Translucent matrix is more uniform in composition and contains less S, CaO and FeO and more MgO than the opaque variety. Both kinds of matrix rimmed chondrules before consolidation of the meteorite.

Scott, E. R. D.↗

NASA NTRS1984

STABCAR: A program for finding characteristic root systems having transcendental stability matrices

STABCAR can be used to determine the characteristic roots of flexible, actively controlled aircraft, including the effects of unsteady aerodynamics. A modal formulation and a transfer-matrix representation of the control system are employed. Operable in either a batch or an interactive mode, STABCAR can provide graphical or tabular output of the variation of the roots with velocity, density, altitude, dynamic pressure or feedback gains. Herein the mathematical model, program structure, input requirements, output capabilities, and a series of sample cases are detailed. STABCAR was written for use on CDC CYBER 175 equipment; modification would be required for operation on other machines.

Adams, W. M., Jr.↗

NASA NTRS1983

Computing the projected area of a spacecraft solar array with matrices

Matrix methods for computing the projected area of a solar array as a function of the rotational position of a spacecraft and of array position on a spacecraft are presented. Formulas are derived which provide the optimum solar array pitch, cant and tracking angles for a given spacecraft configuration and orbit. These formulas are general and applicable to many spacecraft. Formulas are also provided for determining the energy output from an array for a given orbit and the resultant energy available to spacecraft loads. Results are simply obtained and realizable with a hand calculator. The methods above can be extended to the case of computer analysis of solar array shadowing. How this can be done is outlined and results are presented from a spacecraft study program.

E. M. Gaddy↗

NASA NTRS1982

Quadratic integer programming for large scale banded matrices

This paper is concerned with the integer quadratic program where the variables are constrained to belong to a given set of discrete values. This quadratic integer program is shown to be equivalent to a problem of finding the shortest path in a particular directed graph called a trellis when the matrix is a positive-definite symmetric banded matrix. An efficient procedure for solving this shortest path problem is presented which allows the solution of the integer quadratic program. This method is particularly effective when the half-bandwidth of the matrix is significantly smaller than its dimension.

Yan, T. Y.↗

NASA NTRS1984

Thermoplastic composite matrices with improved solvent resistance

In order to improve solvent resistance of aromatic thermoplastic polymers, ethynyl-terminated aromatic sulfone polymers (ETS), sulfone/ester polymers (SEPE) containing pendent ethynyl groups, and phenoxy resin containing pendent ethynyl groups are synthesized. Cured polysulfones and phenoxy resins containing ethynyl groups on the ends or pendent on the molecules exhibited systematic behavior in solvent resistance, film flexibility, and toughness as a function of crosslink density. The film and composite properties of a cured solvent-resistant ETS were better than those of a commercially available solvent sensitive polysulfone. The study was part of a NASA program to better understand the trade-offs between solvent resistance, processability and mechanical properties which may be useful in designing composite structures for aerospace vehicles.

Hergenrother, P. M.↗

NASA NTRS1984

Constituent Property - Composite Property Relationships in Thermoset Matrices

A procedure to effectively screen and evaluate resins for aerospace structures and advanced composites is described. The following conclusions were advanced: (1) laminate damage tolerance correlates positively with neat resin G sub IC; (2) TGDDM/DDS resins can be toughened; (3) using butadiene-nitrile rubbers, neat resin G sub IC and ultimate strain increase with increasing nitrile content, with the number of chemically reactive groups per molecule, and with increasing molecular weight; (4) better balance of properties combined with high G sub IC may be achieved by using tough glassy thermoplastics instead of rubbers to modify TGDDM/DDS resins; (5) both toughening mechanisms require good phase separation with an effective interphase; (6) the kind and the amount of thermoplastic modifier remain to be selected; and (7) presently only about a fourfold increase in G sub IC was achieved, whereas a forty fold increase is sought; modification of the matrix backbone and of crosslinking is required.

Diamant, J.↗

NASA NTRS1984

Solvent Resistant Thermoplastic Composite Matrices

The following approaches improved the solvent resistance and raised the Tg of thermoplastics: end-capping aligomers with ethynyl groups; incorporating ethynyl groups pendent along the polymer chain; and correcting polymers containing pendent ethynyl groups with a low molecular weight diethynyl compound. The following conclusions were reached: (1) film and composite properties off an ethynyl-terminated sulfone were better than those of UDEL (trademark); (2) fracture energy of an ethynyl-terminated sulfone was lower than that of UDEL (trademark); (3) residual palladium in the cured ethynyl-terminated sulfone lower the thermooxidative stability of the cured resin; (4) the properties of a phenoxy resin were altered considerably by placing pendent ethynyl groups along the polymer chain; and (5) property trade-offs must be considered when thermoplastics are modified via reactant groups.

Hergenrother, P. M.↗

NASA NTRS1984

Aliphatic-Aromatic Heterocyclics as Potential Thermoplastics for Composite Matrices

The successful development of impact- and solvent-resistant thermoplastic systems for glass graphite composites is particularly attractive because of the demonstrated streamlined manufacturability of such composites. Hypothetically, thermoplastics only require simple heating and cooling cycles for component manufacture, whereas thermosets require precise, and possibly extended heating schedules which must be consistent with the cure chemistry. The sensitivity of the majority of existing thermoplastics to aircraft fluids and other solvents preempts their serious consideration in aircraft components. This is the basic reason that Acurex proposed insolubility in common solvents as the starting point. The target properties are summarized as follows: (1) prepreg properties (use of conventional prepregging equipment, 6+ months shelf stability, processability, and thermoformability); and (2) composite properties (-54 C to 93 C capability, good mechanical properties, good environmental properties, and impact resistance).

Delano, C. B.↗

NASA NTRS1985

Reciprocating magnetic refrigerator employing tandem porous matrices within a reciprocating displacer

Disclosed is a method and apparatus for a magnetic refrigeration system. A continuously reciprocating displacer houses at least a pair of paramagnetic substances each of which is alternately driven into and out of a magnetic field. Two separate bidirectional pumping systems flow helium gas through the displacer and through both paramagnetic substances to create heat exchange conditions at two separate temperature extremes.

Johnson, D. L.↗

NASA NTRS1985

Advances in Joining Techniques Used in Development of SPF/DB Titanium Sandwich Reinforced with Metal Matrices

Three and four-sheet expanded titanium sandwich sheets have been developed at Douglas Aircraft Company, a division of McDonnell Douglas Corporation, under contract to NASA Langley Research Center. In these contracts, spot welding and roll seam welding are used to join the core sheets. These core sheets are expanded to the face sheets and diffusion bonded to form various type cells. The advantages of various cell shapes and the design parameters for optimizing the wing and fuselage concepts are discussed versus the complexity of the spot weld pattern. In addition, metal matrix composites of fibers in an aluminum matrix encapsulated in a titanium sheath are aluminum brazed successfully to the titanium sandwich face sheets. The strength and crack growth rate of the superplastic-formed/diffusion bonded (SPF/DB) titanium sandwich with and without the metal matrix composites are described.

Fischler, J. E.↗

NASA NTRS1987

Partitioned Matrices for Combined Linear Systems

Multiple-input, multiple-output mathematical models combined. Report presents mathematical background for combination of linear multiple-input, multiple-output equations of subsystems into overall matrix equations for whole system. Development of such system mathematical models essential for design of complicated control systems.

Duke, Eugene L.↗