Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

The conductivity and magnetic properties of zinc oxide thin films doped with cobalt

The magnetic properties, temperature dependences of the resistivity, Hall constant, and magnetoresistance of epitaxial zinc oxide films doped with cobalt are studied. The ferromagnetism of the films is observed at room temperature. The conduction and magnetoresistance of the films are attributed to transport of electrons in the conduction band at high temperatures and to hopping transport at low temperatures. With increasing concentration of cobalt dopants, the resistivity of the films increases and the concentration of electrons decreases. This is due to the increase in the ionization energy of donor states because of the increase in the energy of exchange interaction between electrons at donor states and electrons of the d shell of cobaltions.

36 MATERIALS SCIENCE↗

Structural and Magnetic Properties of Thermal- and Deformation-Induced Martensite in an Fe-27%Ni-4%Mn-1%Zn Alloy

Deformation- and thermal-induced martensite properties were examined according to existing martensite morphology and magnetic properties for same prior austenite homogenization conditions in Fe-27%Ni-4%Mn-1%Zn alloy. Scanning electron microscope (SEM) and vibrating sample magnetometer (VSM) characterization techniques were employed for the investigation. Scanning electron microscope observations showed that while martensite formation in the austenite phase of alloy exhibited a lath morphology by thermal effect, elongated deformation-induced martensite morphology exists after deformation. The Curie temperatures were detected at about 201 K for thermal-induced martensite and at about 226 K for deformation-induced martensite from VSM measurements. The magnetic saturation values were determined as about 21 emu g{sup −1} for thermal-induced martensite and 23 emu g{sup −1} for deformation-induced martensite. We found that magnetic saturation increased with deformation effect. On the other hand, VSM offered the soft ferromagnetic characteristic with coersive values of 36 Oe for thermal-induced martensite and the soft ferromagnetic characteristic with 47 Oe for deformation-induced martensite. The changes in the magnetic properties resulting from the thermal and deformation affect were clearly determined. Deformation caused magnetic stabilization in Fe-27%Ni-4%Mn-1%Zn alloy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cu{sup II} coordination polymers based on 5-methoxyisophthalate and flexible N-donor ligands: Structures and magnetic properties

Three Cu{sup II} coordination polymers, ([Cu{sub 2}(CH{sub 3}O-ip){sub 2}(bmib)]){sub n} (1), ([Cu{sub 2}(CH{sub 3}O-ip){sub 2}(bmib){sub 2}]){sub n} (2) and ([Cu(CH{sub 3}O-ip)(bbip)]∙2H{sub 2}O){sub n} (3) (CH{sub 3}O-H{sub 2}ip is 5-methoxyisophthalic acid, bmib is 1,4-bis(2-methylimidazol-1-yl)butane and bbip is 1,3-bis(1H-benzimidazolyl)propane), have been synthesized by hydrothermal methods. Complexes 1–3 were structurally characterized by elemental analysis, infrared (IR) spectra and X-ray single-crystal diffraction. Complex 1 shows a 3D six-connected self-penetrating network based on paddlewheel secondary building units. Complex 2 has a 3-fold interpenetrating 3D diamond framework. Complex 3 possesses a 1D tube-like chain. Thermo-gravimetric and magnetic properties of 1–3 were also investigated. - Graphical abstract: Structures and magnetic properties of copper(II) coordination polymers constructed from 5-methoxyisophthalate linker and two flexible N-donor ancillary ligands. Three copper(II) coordination polymers with 5-methoxyisophthalate and two related flexible N-donor ancillary ligands have been synthesized and structurally characterized. Moreover, thermal behaviors and magnetic properties of these complexes have also been investigated. - Highlights: • Three Cu(II) coordination polymers were synthesized. • The conformations of N-donor ligands and pH value have an effect on the final structures. • The magnetic properties of 1–3 have been investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study on Magnetic Properties and Degradability of Gas Atomization Fe-Based (Fe-Si-B-P) Amorphous Powder

Fe-based amorphous materials have attracted extensive attention in the application of organic pollutant degradation due to their excellent chemical properties. In this work, a novel Fe-based (Fe-Si-B-P) amorphous powder prepared by gas atomization is employed to decompose azo dyes for wastewater treatment. Its crystalline structure, distribution of particle size, and soft magnetic properties are characterized. The experimental results show that the Fe-based (Fe-Si-B-P) powder is amorphous morphology which might bring many benefits for decomposing organics in waste water. The particle size of the micro-sized spheroidal powder distributes mainly from 10 to 50 μm, and most are about 17~19 μm. The magnetic properties are also investigated. Its saturation magnetization (M{sub S}) and coercivity (H{sub C}) are, respectively, 55 emu/g and 19.6 Oe, which present superb soft magnetic properties. Finally, we studied the degradability of the Fe-based amorphous powder by decomposing the methylene blue in waste water, and the results show that 0.05-g Fe-based amorphous powder can completely degrade the 50 ml methylene blue solution with the concentration of 3 × 10{sup −5} M within 15 min in weak acidic environment, which shows great degradability for wastewater treatment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlating structural, electronic, and magnetic properties of epitaxial VSe 2 thin films

The electronic and magnetic properties of transition metal dichalcogenides are known to be extremely sensitive to their structure. In this paper we study the effect of structure on the electronic and magnetic properties of mono- and bilayer VSe 2 films grown using molecular beam epitaxy. VSe 2 has recently attracted much attention due to reports of emergent ferromagnetism in the two-dimensional (2D) limit. To understand this compound, high-quality 1$\textit{T}$ and distorted 1$\textit{T}$ films were grown at temperatures of 200 °C and 450 °C, respectively, and studied using 4 K scanning tunneling microscopy and spectroscopy. The measured density of states and the charge density wave (CDW) patterns were compared to band structure and phonon dispersion calculations. Films in the 1$\textit{T}$ phase reveal different CDW patterns in the first layer compared to the second. Interestingly, we find the second layer of the 1$\textit{T}$ film shows a CDW pattern with 4$\textit{a}$ × 4$\textit{a}$ periodicity which is the 2D version of the bulk CDW observed in this compound. We report our phonon dispersion calculations confirm the presence of a soft phonon at the correct wave vector that leads to this CDW. In contrast, the first layer of distorted 1$\textit{T}$ phase films shows a strong stripe feature with varying periodicities, while the second layer displays no observable CDW pattern. Finally, we find that the monolayer 1$\textit{T}$ VSe 2 film is weakly ferromagnetic, with ~3.5 $μ_B$ per unit similar to previous reports.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab Initio Study of Electronic and Magnetic Properties of Germanene with Different Nonmagnetic Metal Adatoms

Electronic and magnetic properties of two-dimensional (2D) germanene (Ge) with five different adatoms have been analyzed and discussed by the DFT method. Different nonmagnetic metals adsorbed at different sites, on one hand, a magnetic moment is induced by Mg adatom in the germanene. On the other hand, the adsorptions of Al, Ga, Li, and Na show no magnetism. We further study the effect of strain on the magnetism in Mg-adsorbed germanene; we apply an isotropic tensile and compressive strain on the system. On the basis of our calculations, a tunable magnetism shows as the strain increases. The analysis of the PDOS shows that the s–p hybridization between Mg and Ge atoms results in such magnetic behavior. These magneticadsorbed germanene materials might show potential applications in the nanoscale devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of magnetic properties and electronic structure of layered-structure borides AlT{sub 2}B{sub 2} (T=Fe, Mn, Cr) and AlFe{sub 2–x}Mn{sub x}B{sub 2}

The ternary phases AlT{sub 2}B{sub 2} (T=Fe, Mn, Cr) and quaternary phases AlFe{sub 2–x}Mn{sub x}B{sub 2} have been synthesized by arc-melting and characterized by powder X-ray diffraction, magnetic measurements, Mössbauer spectroscopy, and electronic band structure calculations. All the compounds adopt the AlFe{sub 2}B{sub 2}-type structure, in which infinite zigzag chains of B atoms are connected by Fe atoms into [Fe{sub 2}B{sub 2}] slabs that alternate with layers of Al atoms along the b axis. The magnetic measurements reveal that AlFe{sub 2}B{sub 2} is a ferromagnet with T{sub C}=282 K while AlMn{sub 2}B{sub 2} and AlCr{sub 2}B{sub 2} do not show magnetic ordering in the studied temperature range of 1.8–400 K. A systematic investigation of solid solutions AlFe{sub 2−x}Mn{sub x}B{sub 2} showed a non-linear change in the structural and magnetic behavior. The ferromagnetic ordering temperature is gradually decreased as the Mn content (x) increases. The Mössbauer spectra reveal the presence of non-magnetic (NM) and ferromagnetic (FM) spectral components in all Mn-containing samples, with the amount of NM fraction increasing as the Mn content increases. While for the AlFe{sub 2−x}Mn{sub x}B{sub 2} samples with x=0.0 and 0.4 the hyperfine splitting of the FM spectral component collapses at temperatures close to the Curie temperatures determined from the magnetic measurements, for the x=1.2 and 1.6 samples the FM fraction exhibits a sizable unquenched hyperfine splitting at room temperature, a finding that is inconsistent with the observed magnetic properties. Along with the increase in the amount of the NM fraction, this observation suggests formation of Fe-rich and Mn-rich regions in the structure of the solid solutions. Quantum-chemical calculations and crystal orbital Hamilton population analysis provide a clear explanation of the distinction in properties for this series of compounds and also reveal the importance of electronic factors in modifying the magnetic properties of these materials. - Graphical abstract: We follow a gradual evolution of magnetic properties in a series of ternary borides AlT{sub 2}B{sub 2}, from non-magnetic AlCr{sub 2}B{sub 2} and AlMn{sub 2}B{sub 2} to ferromagnetic AlFe{sub 2}B{sub 2}. - Highlights: • AlT{sub 2}B{sub 2} (T=Fe, Mn, Cr) and AlFe{sub 2−x}Mn{sub x}B{sub 2} were prepared by arc‐melting. • Bulk ferromagnetism of AlFe{sub 2}B{sub 2} is gradually suppressed by the introduction of Mn. • AlMn{sub 2}B{sub 2} and AlCr{sub 2}B{sub 2} do not exhibit magnetic ordering. • Nonmagnetic (Mn‐rich) and ferromagnetic (Fe‐rich) clustering in AlFe{sub 2–x}Mn{sub x}B{sub 2}. • Ferromagnetism is suppressed due to weakening of antibonding T–T interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of super-exchange interaction on ground state magnetic properties of spin-dependent Falicov-Kimball model on a triangular lattice

Ground state magnetic properties are studied by incorporating the super-exchange interaction (J{sub se}) in the spin-dependent Falicov-Kimball model (FKM) between localized (f-) electrons on a triangular lattice for half filled case. Numerical diagonalization and Monte-Carlo simulation are used to study the ground state magnetic properties. We have found that the magnetic moment of (d-) and (f-) electrons strongly depend on the value of Hund’s exchange (J), super-exchange interaction (J{sub se}) and also depends on the number of (d-) electrons (N{sub d}). The ground state changes from antiferromagnetic (AFM) to ferromagnetic (FM) state as we decrease (N{sub d}). Also the density of d electrons at each site depends on the value of J and J{sub se}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low-Temperature Magnetic Properties of Superconducting Indium Nanocomposites in Opal Matrix

We studied magnetic properties of the In–opal nanocomposite, which is a close-packed system of SiO{sub 2} spheres of the same diameter D with metal-filled cavities (series of opal structures with D = 190, 230, and 290 nm were studied). The dependencies of the samples’ magnetization m on temperature T, as well as on external magnetic field H, were measured at various temperatures below the critical temperature T{sub c} of the superconducting (SC) transition. The critical temperature T{sub c} and the critical magnetic field H{sub c} were measured. Magnetization jumps were observed in m(H) dependences at temperatures below 2.6 K. It was found that the jumps are quasiperiodic as functions of H, and the number of jumps increases both with increase in the sweeping rate dH/dt, as well as with decrease in the characteristic size of the In inclusions in the nanocomposite. A model describing the breakup of the SC state with an increase in the external magnetic field is proposed. According to this model, when the screening current reaches a critical value in the near-surface layer of the nanocomposite, an avalanche-like penetration of the field into the volume of the nanocomposite occurs. After this, the SC state is restored, and the magnetic field “freezes” in the structure of the nanocomposite.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and magnetic properties of La–Co substituted Sr–Ca hexaferrites synthesized by the solid state reaction method

Graphical abstract: The change of the remanence (B{sub r}) and intrinsic coercivity (H{sub cj}) with La content (x) and Co content (y) of hexagonal ferrite Sr{sub 0.7−x}Ca{sub 0.3}La{sub x}Fe{sub 12−y}Co{sub y}O{sub 19} magnets. - Highlights: • Sr{sub 0.7−x}Ca{sub 0.3}La{sub x}Fe{sub 12−y}Co{sub y}O{sub 19} hexaferrites were synthesized by the solid state reaction method. • B{sub r} continuously increases with increasing dopant contents. • H{sub cb}, H{sub cj} and (BH){sub max} for the magnets first increases and then decreases with an increase in the La–Co contents. - Abstract: Hexagonal ferrite Sr{sub 0.7−x}Ca{sub 0.3}La{sub x}Fe{sub 12−y}Co{sub y}O{sub 19} (x = 0.05–0.50; y = 0.04–0.40) magnetic powders and magnets were synthesized by the solid state reaction method. X-ray diffraction was employed to determine the phase compositions of the magnetic powders. There is a single magnetoplumbite phase in the magnetic powders with the substitution of La (0.05 ≤ x ≤ 0.15) and Co (0.04 ≤ y ≤ 0.12) contents. For the magnetic powders containing La (x ≥ 0.20) and Co (y ≥ 0.16), magnetic impurities begin to appear in the structure. A field emission scanning electron microscope was used to characterize the micrographs of the magnets. The magnets have formed hexagonal structures. Magnetic properties of the magnets were measured by a magnetic properties test instrument. The remanence continuously increases with increasing dopant contents. Whereas, the magnetic induction coercivity, intrinsic coercivity and maximum energy product for the magnets first increases and then decreases with an increase in the La–Co contents.

36 MATERIALS SCIENCE↗

Structural, electronic and magnetic properties of chevron-type graphene, BN and BC{sub 2}N nanoribbons

Graphene nanoribbons are predicted to be essential components in future nanoelectronics. The size, edge type, arrangement of atoms and width of nanoribbons drastically change their properties. Boronnitrogencarbon nanoribbons properties are not fully understood so far. In the present contribution it was investigated the structural, electronic and magnetic properties of chevron-type carbon, boron nitride and BC{sub 2}N nanoribbons, using first-principles calculations. The results indicate that the structural stability is closely related to the discrepancies in the bond lengths, which can induce structural deformations and stress. Such nanoribbons present a wide range of electronic behaviors, depending on their composition and particularities of the atomic arrangement. A net magnetic moment is found for structures that present carbon atoms at the nanoribbon borders. Nevertheless, the calculated magnetic moment depends on the peculiarities of the symmetric arrangement of atoms and imbalance of carbon atoms between different sublattices. It was found that all structures which have a significant energy gap do not present magnetic moment, and vice-versa. Such result indicates the strong correlation between the electronic and magnetic properties of the chevron-type nanoribbons. - Highlights: • Small discrepancies between distinct bond lengths can influence the formation energy of the BC{sub 2}N nanoribbons. • The electronic behavior of the BC{sub 2}N chevron-type nanoribbons depends on the atomic arrangement and structural symmetries. • There is a strong correlation between the electronic and magnetic properties for the BC{sub 2}N structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Switchable electronic and enhanced magnetic properties of CrI 3 edges

Owing to its novel electronic and magnetic properties, two-dimensional CrI 3 has great potential in the application of spintronic devices. However, as an inevitable line defect, the properties of the edges of CrI 3 remain elusive. Here, via first-principles calculations with spin–orbit coupling, we investigated the thermodynamic stabilities, electronic and magnetic properties of thirteen CrI 3 edges with different structures. We showed that zigzag edges are more stable than armchair edges, and a CrI 3 nanoribbon can be either metallic or insulating depending on its chemical growth conditions. Here, the edge stability and associated electronic properties can be understood in terms of the octahedron ligand field and electron counting model. In most cases, both the magnetic moment and Curie temperature can be enhanced by edges, which are in startle contrast to the surfaces of three-dimensional ferromagnetic materials, where a magnetic dead layer is often observed.

36 MATERIALS SCIENCE↗

Microstructure evolution and magnetic properties of FeB/Pt multilayers and FeBPt composite films

Comparisons of microstructural evolution and magnetic properties were made of a FeB12/Pt10/[FeB1.2/Pt1]{sub 15}/Ta5 nm multilayered structure with a FeB12/Pt10/FeBPt33/Ta5 nm co-deposited structure. The Ta capping layer was used to protect the films from oxidation. Both these samples were sputtered in the same planetary deposition system onto thermally oxidized silicon substrates. They both represent layer-by-layer deposition, with the second type of deposition having atomically fine layers, more than an order of magnitude finer than the first type. The samples were annealed at a range of times, temperatures, and vacuum conditions. X-ray diffraction (XRD), transmission electron microscopy, and alternating gradient magnetometry were employed to characterize the structural and magnetic properties, respectively. Significant differences were observed between the two types of structures. A maximum coercivity of 8.9 kOe was seen for the atomically fine multilayer, about 10% more than that for the coarse multilayer. XRD analysis confirmed that both the coarse and fine multilayers were in the L1{sub 0} phase after annealing. Our results indicate that the co-deposited film, which is really composed of atomically fine multilayers, is superior to the coarse multilayered FeB/Pt for the formation of L1{sub 0}-phase FePt.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unraveling Site Selective Magnetic Properties of Cobalt Sites in Critical Elements Lean RE(TM)5 Magnet Materials

We report here our discovery of crystallographic and interstitial sites and onsite electron correlation propelled intrinsic and derived permanent magnetic properties of critical elements lean RE(TM) 5 (RE = La, Ce and TM = Fe, Co) magnet materials. A full potential linearized augmented plane wave (FP-LAPW) method within the local density approximation (LDA) is used to investigate and analyze the electronic structure and magnetism of these RE(TM) 5 type structures. To better correlate the experimental results, the effective Coulomb (U) and exchange (J) interactions (Hubbard parameters) are crucial at the transition metal sites. Results show that the main propeller of magnetic anisotropy in these compounds is the cobalt atoms at the 2c sites not the 3g sites. This site-specific property and site preference energetics are used to replace 3g sites with non-critical elements such as iron that exhibits a larger magnetic moment. Based on this strategic replacement, we predict two new compounds that have a larger hardness parameter with a relatively large energy product due to the atomic dilution caused by interstitial addition of nitrogen in the compounds: CeCo 2 Fe 3 N 2 and LaCo 2 Fe 3 N 2 .

Rare-earths↗

Structures, phase transitions, and magnetic properties of C o 3 Si from first-principles calculations

Co 3 Si was recently reported to exhibit remarkable magnetic properties in the nanoparticle form [Appl. Phys. Lett. 108, 152406 (2016)], yet better understanding of this material is to be promoted. Here we report a study on the crystal structures of Co 3 Si using adaptive genetic algorithm, and discuss its electronic and magnetic properties from first-principles calculations. Several competing phases of Co 3 Si have been revealed from our calculations. We show that the hexagonal Co 3 Si structure reported in experiments has lower energy in non-magnetic state than ferromagnetic state at zero temperature. The ferromagnetic state of the hexagonal structure is dynamically unstable with imaginary phonon modes and transforms to a new orthorhombic structure, which is confirmed by our structure searches to have the lowest energy for both Co 3 Si and Co 3 Ge. Magnetic properties of the experimental hexagonal structure and the lowest-energy structures obtained from our structure searches are investigated in detail.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature-Dependent Magnetic Properties of Magnetorheological Elastomers

We report on an investigation of the temperature-dependent magnetic properties of magnetorheological elastomers (MREs). These are a class of composites that consist of magnetically permeable particles dispersed in a nonmagnetic polymeric matrix. Under the application of an external magnetic field, a large deformation occurs altering the mechanical properties of these materials. Due to their magnetoelastic coupling response, these materials are finding an increasing interest among the scientific community. These polymer-based composites’ performance depends on many factors, which temperature is one of the biggest influencing factors requiring further investigation. In this work, the magnetic properties of isotropic and anisotropic polyurethane-based MRE with different iron (Fe) particle loading fractions (50, 60, 70, and 80% by weight) were investigated under different temperatures. From the analysis, the magnetization curves of these materials are observed to overlap for the different measured temperature values. The variation of various magnetic properties including saturation magnetization and differential susceptibility with temperature was also determined. Furthermore, the results show ~ 2.5% decrement in the saturation magnetization for each of the loading fractions, between the lowest (300K) and the highest (400K) measured temperature. On the other hand, the initial differential susceptibility exhibits different trends with increasing temperature. Generally, the magnetization response of these materials is seen to be only slightly sensitive to temperature changes. Additionally, the magnetization response is observed to be highly dependent on particle loading fractions and particle orientation within the elastomer.

36 MATERIALS SCIENCE↗

Room temperature dielectric and magnetic properties of Gd and Ti co-doped BiFeO{sub 3} ceramics

Room temperature dielectric and magnetic properties of BiFeO{sub 3} samples, co-doped with magnetic Gd and non-magnetic Ti in place of Bi and Fe, respectively, were reported. The nominal compositions of Bi{sub 0.9}Gd{sub 0.1}Fe{sub 1–x}Ti{sub x}O{sub 3} (x = 0.00-0.25) ceramics were synthesized by conventional solid state reaction technique. X-ray diffraction patterns revealed that the substitution of Fe by Ti induces a phase transition from rhombohedral to orthorhombic at x > 0.20. Morphological studies demonstrated that the average grain size was reduced from ∼1.5 μm to ∼200 nm with the increase in Ti content. Due to Ti substitution, the dielectric constant was stable over a wide range of high frequencies (30 kHz to 20 MHz) by suppressing the dispersion at low frequencies. The dielectric properties of the compounds are associated with their improved morphologies and reduced leakage current densities probably due to the lower concentration of oxygen vacancies in the compositions. Magnetic properties of Bi{sub 0.9}Gd{sub 0.1}Fe{sub 1–x}Ti{sub x}O{sub 3} (x = 0.00-0.25) ceramics measured at room temperature were enhanced with Ti substitution up to 20% compared to that of pure BiFeO{sub 3} and Ti undoped Bi{sub 0.9}Gd{sub 0.1}FeO{sub 3} samples. The enhanced magnetic properties might be attributed to the substitution induced suppression of spiral spin structure of BiFeO{sub 3}. An asymmetric shifts both in the field and magnetization axes of magnetization versus magnetic field curves was observed. This indicates the presence of exchange bias effect in these compounds notably at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic properties of quadruple perovskites Ba{sub 4}LnRu{sub 3}O{sub 12} (Ln=La, Nd, Sm-Gd, Dy-Lu)

Quadruple perovskites Ba{sub 4}LnRu{sub 3}O{sub 12} (Ln=La, Nd, Sm-Gd, Dy-Lu) were prepared and their magnetic properties were investigated. They adopt the 12L-perovskite-type structure consisting of Ru{sub 3}O{sub 12} trimers and LnO{sub 6} octahedra. All of these compounds show an antiferromagnetic transition at 2.5-30 K. For Ba{sub 4}NdRu{sub 3}O{sub 12}, ferrimagnetic ordering has been observed at 11.5 K. The observed magnetic transition is due to the magnetic behavior of the Ru{sup 4.33+}{sub 3}O{sub 12} trimer with S=1/2 . Magnetic properties of Ba{sub 4}LnRu{sub 3}O{sub 12} were compared with those of triple perovskites Ba{sub 3}LnRu{sub 2}O{sub 9} and double perovskites Ba{sub 2}LnRuO{sub 6}. - Graphical abstract: Quadruple perovskites Ba{sub 4}LnRu{sub 3}O{sub 12} (Ln=La, Nd, Sm-Gd, Dy-Lu) were prepared. They adopt the 12L-perovskite-type structure consisting of Ru{sub 3}O{sub 12} trimers and LnO{sub 6} octahedra. All of these compounds show an antiferromagnetic transition at 2.5-30 K. For Ba{sub 4}NdRu{sub 3}O{sub 12}, ferrimagnetic ordering has been observed at 11.5 K. The observed magnetic transition is due to the magnetic behavior of the Ru{sup 4.33+}{sub 3}O{sub 12} trimer with S=1/2 . Magnetic properties of Ba{sub 4}LnRu{sub 3}O{sub 12} were compared with those of triple perovskites Ba{sub 3}LnRu{sub 2}O{sub 9} and double perovskites Ba{sub 2}LnRuO{sub 6}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗