Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Layered materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Modeling of deformation of battery cells using thick shell element formulation

Here, we describe a new approach for modeling nonlinear deformation and stress distribution of battery cells using a new thick shell finite element formulation with a through-thickness calculation of stresses and strains that satisfy equilibrium conditions. Battery cells are transversely layered materials that contain numerous thin layers in a repeating sequence. The layers are made of materials with significantly different mechanical responses. Explicit discretization of the layers is computationally impractical except for very small domains, while homogenized material models cannot account for stress and strain variations and partition through the thickness. The new formulation allows for calculation of the transverse and interlayer stresses based on the material properties of the individual cell layers. The application to problems where the transverse stresses have strong influence is also possible.

25 ENERGY STORAGE↗

Solar cell contact formation using laser ablation

The formation of solar cell contacts using a laser is described. A method of fabricating a back-contact solar cell includes forming a poly-crystalline material layer above a single-crystalline substrate. The method also includes forming a dielectric material stack above the poly-crystalline material layer. The method also includes forming, by laser ablation, a plurality of contacts holes in the dielectric material stack, each of the contact holes exposing a portion of the poly-crystalline materiat layer; and forming conductive contacts in the plurality of contact holes.

36 MATERIALS SCIENCE↗

Defect formation and microstructure tuning via proton irradiation to control electrochemical and phase reversibility in layered battery materials

The reversibility of phase transformation influences the functionality of electrode materials in batteries. In many battery materials, nanosized grains favor phase reversibility but at the cost of cyclability due to aggravated side reactions with the electrolyte. Here, in this study, we present a novel approach to enhance the phase transformation reversibility of layered oxide cathodes, exemplified by Na 2/3 Fe 1/2 Mn 1/2 O 2 through proton irradiation. In addition to forming defects, proton irradiation at sufficiently high doses can subdivide single grains into multiple nanodomains without physically rupturing them. Hence, the single grains of the material assume a pseudo-secondary particle nature without reducing the overall grain size. Preserving the grain size is advantageous, as it reduces side reactions, which is not possible with conventional grain size reduction methods. While chemical transformations and defect formation induced through proton irradiation can influence the stability of battery materials, it is expected that structural reorganization due to cycling-induced phase transformation will be contained within these nanodomains. Such confinement of phase transformation is potentially responsible for enhancing the reversibility of layered oxide materials in our study. Thus, our study suggests that grain subdivision could become an effective microstructure tuning strategy for managing electrochemical cycling-induced phase changes in battery electrodes.

25 ENERGY STORAGE↗

Unexpected structural/motional mode of water intercalated into an α-crystalline zirconium phosphate deduced by 31 P and 2 H solid-state MAS NMR spectra

Here, in developing the approach to understanding dynamics of intercalates in layered materials, crystalline-layered zirconium phosphate Zr (HPO 4 ) 2 ·0.35D2O has been prepared and characterized by the 1 H, 31 P, and 2 H solid-state MAS NMR spectra, including 31 P and 2 H T 1 measurements. At temperatures >253 K, the intercalated water shows two spectrally-distinguished deuterons unprecedentedly with different DQCC's and 2 H T 1 times, one of which is hydrogen bonded. The collected data allowed to identify an unexpected bonding/dynamic mode of water molecules, which experience fast rotation around the hydrogen bond, formed with a zirconium-coordinated oxygen. The low-temperature 2 H MAS NMR experiments have demonstrated the presence of additional hydrogen bond P—(H)O˙˙˙ DO, population of which grows on cooling to 195 K corresponding to the doubly hydrogen-bonded immobile water molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The local ordering of polar solvents around crystalline carbon nitride nanosheets in solution

The crystalline graphitic carbon nitride, poly-triazine imide (PTI) is highly unusual among layered materials since it is spontaneously soluble in aprotic, polar solvents including dimethylformamide (DMF). The PTI material consists of layers of carbon nitride intercalated with LiBr. When dissolved, the resulting solutions consist of dissolved, luminescent single to multilayer nanosheets of around 60–125 nm in diameter and Li+ and Br- ions originating from the intercalating salt. To understand this unique solubility, the structure of these solutions has been investigated by high-energy X-ray and neutron diffraction. Although the diffraction patterns are dominated by inter-solvent correlations there are clear differences between the X-ray diffraction data of the PTI solution and the solvent in the 4–6 Å -1 range, with real space differences persisting to at least 10 Å. Structural modelling using both neutron and X-ray datasets as a constraint reveal the formation of distinct, dense solvation shells surrounding the nanoparticles with a layer of Br - close to the PTI-solvent interface. This solvent ordering provides a configuration that is energetically favourable underpinning thermodynamically driven PTI dissolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interfacial Engineering Enabled Novel Bi-Based Layered Oxide Supercells with Modulated Microstructures and Tunable Physical Properties

Two-dimensional layered materials hold great significance to fundamental scientific research and future nanoscale device applications. Besides the well-studied graphene and dichalcogenides, oxide-based layered materials are another family attracting significant research interests, for example, the Bi-based Bi 3 Fe 2 Mn 2 O 10-δ layered supercell (called BFMO322 SC) structure. BFMO322 SC is an excellent room-temperature multiferroic material, but its growth mechanism is unclear. In this work, Bi 2 Fe 1–x Mn x O 6 thin films with different Fe/Mn molar ratios were deposited on CeO 2 buffer layers by pulsed laser deposition. By varying the Fe/Mn molar ratios, it has been determined that Mn can favor the growth of Bi-based layered structures, while Fe cannot facilitate the growth. A series of novel layered supercell structures can be obtained by manipulating the growth kinetics at the substrate/film interface, as achieved by precisely controlling the growth conditions. More interestingly, the magnetization and optical band gap of the Bi-based layered structures can be tuned by varying the Fe/Mn molar ratios. This original work has demonstrated the power of interfacial engineering in enabling new Bi-based layered structures and thus is of great significance for the design of new layered structures with multifunctionalities.

36 MATERIALS SCIENCE↗

Nanostructured layer for graded index freeform optics

The present disclosure relates to a method for creating an optical component having a spatially controlled refractive index. The method may involve applying a thin metal material layer to a substrate. The thin metal material layer may then be heated to create a mask having a spatially varying nano-particle distribution. The substrate may then be etched, using the mask, to imprint a spatially patterned nanostructure pattern on a surface the substrate.

36 MATERIALS SCIENCE↗

Nucleation of dislocations and their dynamics in layered oxide cathode materials during battery charging

Lithium-rich layered oxides (LRLO) are among the leading candidates for the next-generation cathode material for energy storage, delivering 50% excess capacity over commercially used compounds. Despite excellent prospects, voltage fade has prevented effective use of the excess capacity, and a major challenge has been a lack of understanding of the mechanisms underpinning the voltage fade. Here, using operando three-dimensional Bragg coherent diffractive imaging, we directly observe the nucleation of a mobile dislocation network in LRLO nanoparticles. The dislocations form more readily in LRLO as compared with a classical layered oxide, suggesting a link between the defects and voltage fade. We show microscopically how the formation of partial dislocations contributes to the voltage fade. The insights allow us to design and demonstrate an effective method to recover the original high-voltage functionality. Furthermore, our findings reveal that the voltage fade in LRLO is reversible and call for new paradigms for improved design of oxygen-redox active materials.

25 ENERGY STORAGE↗

Novel hetero-bilayered materials for photovoltaics

The recently synthesized GaS and MoSe 2 nanosheets have been used as appropriate substrates for other layered materials, e.g. silicene/GaS heterosheets akin to graphene/BN systems. Here, we have performed a comprehensive first-principles study of the electronic and optical properties of two-dimensional (2D) GaS/MoSe 2 hetero-bilayers based on density functional theory (DFT). Here we found almost all proposed GaS/MoSe2 hetero-bilayers in the current study have an indirect band gap from the Γ point to the K point, except for one with a direct band gap at the K point. Tunable band gaps GaS/MoSe 2 hetero-bilayers can be controlled by strain modulation. State-of-the-art GW-Bethe–Salpeter method, accounting for electron-electron and electron-hole interactions, has been employed to compute accurate absorbance spectra for layered materials. Compared with its composing GaS and MoSe 2 monolayers, GaS/MoSe 2 hetero-bilayers show superior behavior on optical absorbance, indicating a stronger visible-light absorption and applications in solar energy harvesting. We foresee that the novel GaS/MoSe 2 hetero-bilayers would stimulate the fabrication of materials with unprecedented optical and physico-chemical properties that may apply in nanodevices and photovoltaic cells.

36 MATERIALS SCIENCE↗

Porous and Microporous Honeycomb Composites as Potential Boundary-Layer Bleed Materials

Results of an experimental investigation are presented in which the use of porous and microporous honeycomb composite materials is evaluated as an alternate to perforated solid plates for boundary-layer bleed in supersonic aircraft inlets. The terms "porous" and "microporous," respectively, refer to bleed orifice diameters roughly equal to and much less than the displacement thickness of the approach boundary-layer. A Baseline porous solid plate, two porous honeycomb, and three microporous honeycomb configurations are evaluated. The performance of the plates is characterized by the flow coefficient and relative change in boundary-layer profile parameters across the bleed region. The tests were conducted at Mach numbers of 1.27 and 1.98. The results show the porous honeycomb is not as efficient at removing mass compared to the baseline. The microporous plates were about equal to the baseline with one plate demonstrating a significantly higher efficiency. The microporous plates produced significantly fuller boundary-layer profiles downstream of the bleed region for a given mass flow removal rate than either the baseline or the porous honeycomb plates.

Davis, D. O.↗

Protective coatings for lithium metal electrodes

Double-layered protective coatings for lithium metal electrodes, as well as methods of formation relating thereto, are provided. The negative electrode assembly includes an electroactive material layer including lithium metal and a protective dual-layered coating. The protective dual-layered coating includes a polymeric layer disposed on a surface of the electroactive material layer and an inorganic layer disposed on an exposed surface of the polymeric layer. The polymeric layer has an elastic modulus of greater than or equal to about 0.01 GPa to less than or equal to about 410 GPa. The inorganic layer has an elastic modulus of greater than or equal to about 10 GPa to less than or equal to about 1000 GPa.

Xiao, Xingcheng↗

Novel Layered Supercell Structure from Bi 2 AlMnO 6 for Multifunctionalities

Layered materials, e.g., graphene and transition metal (di)chalcogenides, holding great promises in nanoscale device applications have been extensively studied in fundamental chemistry, solid state physics and materials research areas. In parallel, layered oxides (e.g., Aurivillius and Ruddlesden–Popper phases) present an attractive class of materials both because of their rich physics behind and potential device applications. In this work, we report a novel layered oxide material with self-assembled layered supercell structure consisting of two mismatch-layered sublattices of [Bi 3 O 3+δ ] and [MO 2 ] 1.84 (M = Al/Mn, simply named BAMO), i.e., alternative layered stacking of two mutually incommensurate sublattices made of a three-layer-thick Bi–O slab and a one-layer-thick Al/Mn–O octahedra slab in the out-of-plane direction. Strong room-temperature ferromagnetic and piezoelectric responses as well as anisotropic optical property have been demonstrated with great potentials in various device applications. Furthermore, the realization of the novel BAMO layered supercell structure in this work has paved an avenue toward exploring and designing new materials with multifunctionalities.

36 MATERIALS SCIENCE↗

Nickel-cobalt alloy nanosheets obtained from reductive hydrothermal-treatment of nickel-cobalt hydroxide carbonate

Highlights: Black-Right-Pointing-Pointer An anionic layered material, nickel-cobalt hydroxide carbonate was synthesized. Black-Right-Pointing-Pointer Reductive hydrothermal-treatment of the layered precursor produced an alloy. Black-Right-Pointing-Pointer The alloy is a bimetallic nanostructured nickel-cobalt and a soft magnet material. -- Abstract: Nickel-cobalt hydroxide carbonate, a layered material was synthesized by the co-precipitation method using urea as precipitant agent. This anionic layered material with hexagonal structure is constructed from nickel and cobalt ions within the layers and carbonate anions between the layers. Nickel-cobalt alloy with pure cubic phase was obtained by a reductive hydrothermal-treatment of the layered precursor. Powder X-ray diffraction pattern and Fourier transform infrared spectroscopy confirmed the formation of the initial layered material and its metallic alloy product. That is, the nickel-cobalt alloy has really produced via a wet chemical route for the first time. Magnetic measurement revealed that the alloy sample is a soft magnet material.

36 MATERIALS SCIENCE↗

Tracking the Influence of Thermal Expansion and Oxygen Vacancies on the Thermal Stability of Ni-Rich Layered Cathode Materials

The ever-growing demand for high-energy lithium-ion batteries in portable electronics and electric vehicles has triggered intensive research efforts over the past decade. An efficient strategy to boost the energy and power density of lithium-ion batteries is to increase the Ni content in the cathode materials. However, a higher Ni content in the cathode materials gives rise to safety issues. Herein, thermal expansion and oxygen vacancies are proposed as new critical factors that affect the thermal stability of charged Ni-rich cathode materials based on a systematic synchrotron-based X-ray study of Li 0.33 Ni 0.5+x Co 0.2 Mn 0.3-x O 2 (x = 0, 0.1, 0.2) cathode materials during a heating process. Charged cathode materials with higher Ni contents show larger thermal expansion, which accelerates transition metal migration to the Li layers. Oxygen vacancies are formed and accumulate mainly around Ni ions until the layered-to-spinel phase transition begins. The oxygen vacancies also facilitate transition metal migration to the Li layers. Thermal expansion and the presence of oxygen vacancies decrease the energy barrier for cation migration and facilitate the phase transitions in charged cathode materials during the heating process. These results provide valuable guidance for developing new cathode materials with improved safety characteristics.

25 ENERGY STORAGE↗

Accumulative fold-forging (AFF) as a novel severe plastic deformation process to fabricate a high strength ultra-fine grained layered aluminum alloy structure

Highlights: • A novel SPD process named as AFF was introduced. • AFF process is based on the repetitive forging of folded metal foils. • This new method possesses an exceptional capability for fabrication of UFG layered structures. • An AA8006 aluminum alloy layered material with the UFG structure of 200–300 nm was produced. • An enhanced hardness up to ~ 100% was attained owing to the UFG and layered structures. - Abstract: A novel severe plastic deformation (SPD) process termed accumulative fold forging (AFF) is introduced to fabricate a homogenous ultra-fine grained (UFG) layered metal structure by repetitive folding and forging aluminum alloy foil. The present work studies AFF applied to thin foils of AA8006 Al-Fe-Mn aluminum alloy after 26 folding steps to produce a UFG structure containing 67,108,864 layers across a 2 mm thickness. The structure of the layers and grain refinement are studied using X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM) and scanning-transmission electron microscopy (STEM) analysis. The results indicate a well-bonded inter-layer structure with an average grain size of about 200 nm parallel and 250 nm perpendicular to the forging direction, while dislocation density increased to ~ 7.2 × 10{sup 15} m{sup − 2} following AFF. The mechanical strength of the aluminum foil is evaluated in the terms of indentation hardness testing before and after AFF process. The processed UFGed layered material exhibited an average hardness value of ~ 61.5 Vickers as compared to the initial value of ~ 30.4 Vickers for the annealed foil alloy, which indicates an improvement of ~ 100% due to the contributions of grain refinement, work hardening and interfacial strengthening of the bonded layers.

36 MATERIALS SCIENCE↗

Electromagnetic device having layered magnetic material components and methods for making same

A micro fabricated electromagnetic device and method for fabricating its component structures, the device having a layered magnetic core of a potentially unlimited number of alternating insulating and magnetic layers depending upon application, physical property and performance characteristic requirements for the device. Methods for fabricating the high performing device permit cost effective, high production rates of the device and its component structures without any degradation in device performance resulting from component layering.

Mehrotra, Vivek↗

Overview of recent tritium target filling, layering, and material testing at Los Alamos national laboratory in support of inertial fusion experiments

The Tritium Science and Engineering (AET-3) Group at Los Alamos National Laboratory (LANL) performs a variety of activities to support Inertial Fusion (IF) research - both to further fundamental fusion science and to develop technologies in support of Inertial Fusion Energy (IFE) power generation. Inertial fusion ignition target designs have a smooth spherical shell of cryogenic Deuterium-Tritium (DT) solid contained within a metal or plastic shell that is a few mm in diameter. Fusion is attained by imploding these shells under the symmetric application of energy beams. For IFE targets the DT solid must also survive the process of injecting it into the power plant reactor. Non-ignition IF targets often require a non-cryogenic DT gas fill of a glass or polymeric shell. In this paper an overview will be given of recent LANL activities to study cryogenic DT layering, observe tritium exposure effects on IF relevant materials, and fill targets in support of IF implosion experiments. (authors)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗