Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Launcher”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Atomic oxygen studies on polymers

The purpose was to study the effects of atomic oxygen on the erosion of polymer based materials. The development of an atomic oxygen neutral beam facility using a SURFATRON surface wave launcher that can produce beam energies between 2 and 3 eV at flux levels as high as approx. 10 to the 17th power atoms/cm (2)-sec is described. Thin film dielectric materials were studied to determine recession rates and and reaction efficiencies as a function of incident beam energy and fluence. Accelerated testing was also accomplished and the values of reaction efficiency compared to available space flight data. Electron microscope photomicrographs of the samples' surface morphology were compared to flight test specimens.

Morison, W. D.↗
NASA NTRS1988

Ariane 5 verification and associated test facilities

The philosophy of verification tests of the Ariane 5 launcher program is already established. It corresponds to the development and the ground and flight qualification phases for both unmanned and manned launches. The different types of test are outlined for the system, booster, main core and upper structures, allowing the identification of the associated test facilities which are described.

Vedrenne, M.↗
NASA NTRS1988

Coffee-can-sized spacecraft

The current status and potential scientific applications of intelligent 1-5-kg projectiles being developed by SDIO and DARPA for military missions are discussed. The importance of advanced microelectronics for such small spacecraft is stressed, and it is pointed out that both chemical rockets and EM launchers are currently under consideration for these lightweight exoatmospheric projectiles (LEAPs). Long-duration power supply is identified as the primary technological change required if LEAPs are to be used for interplanetary scientific missions, and the design concept of a solar-powered space-based railgun to accelerate LEAPs on such missions is considered.

Jones, Ross M.↗
NASA NTRS1989

Infrastructure considerations

An evaluation is made of performance requirements and technology development prospects for the logistical capacity entailed by manned space exploration. While the Space Shuttle will suffice for the launch of crews to a LEO Space Station, in support of such exploration missions, cargo transport will require 500-1000 tonne annual payload capacity launchers. As a first step toward satisfaction of such requirements, NASA has undertaken the development of the Shuttle-C unmanned Space Shuttle derivative. This will be followed by the Shuttle-Z derivative-family, aimed at meeting the needs of Mars missions. Joint USAF/NASA Advanced Launch System development will allow a given launch to place 91 tonnes in LEO.

Lovelace, Uriel↗
NASA NTRS1988

An overview of a tether deployment monitoring system

A study was conducted to investigate the feasibility of monitoring the position of a tether during tether deployment. Several major configurations were investigated, including considerations of passive or active optical detection, radar, lidar, and active instrumentation packages. Cost, weight, the impact on tether operational dynamics, and the orbiter integration considerations were studied for each of these methods. Results indicated that implementation of such a monitoring system can be accomplished with little or no impact on tether deployment operations. Design diagrams are presented for two launchers and a tether attitude/tension detector.

Ibanez, P.↗
NASA NTRS1989

Optimization of the propulsion cycles for advanced shuttles. I - Propulsion mass model methodology

During the past year NASA and DLR computer codes were combined in order to analyze and optimize advanced rocket launcher systems. Previous optimization results led to relatively low chamber pressures and nozzle area ratios for the different cycles. Additional effort has been made to improve the verification of propulsive parameters such as chamber pressure, nozzle extension, kind of cycle, tripropellant systems, variable mixture ratio rocket motors, new technology effects, etc. The emphasis of this paper is to describe the methodology of the improved propulsion mass model.

Manski, Detlef↗
NASA NTRS1989

Studies of an extensively axisymmetric rocket based combined cycle (RBCC) engine powered single-stage-to-orbit (SSTO) vehicle

The present comparative performance study has established that rocket-based combined cycle (RBCC) propulsion systems, when incorporated by essentially axisymmetric SSTO launch vehicle configurations whose conical forebody maximizes both capture-area ratio and total capture area, are capable of furnishing payload-delivery capabilities superior to those of most multistage, all-rocket launchers. Airbreathing thrust augmentation in the rocket-ejector mode of an RBCC powerplant is noted to make a major contribution to final payload capability, by comparison to nonair-augmented rocket engine propulsion systems.

Foster, Richard W.↗
NASA NTRS1990

A superconducting quenchgun for delivering lunar derived oxygen to lunar orbit

The development of a parametric model for a superconducting quenchgun for launching lunar derived liquid oxygen to lunar orbit is detailed. An overview is presented of the quenchgun geometry and operating principles, a definition of the required support systems, and the methods used to size the quenchgun launcher and support systems. An analysis assessing the impact of a lunar quenchgun on the OEXP Lunar Evolution Case Study is included.

Nottke, Nathan↗
NASA NTRS1989

Think small - In large numbers

The development and use of microspacecraft are examined. It is proposed that 10-50 microspacecraft per year can be launched; up to 50 microspacecraft can be dispatched with traditional launchers; and 1-3 experiments can be performed on the spacecraft. Various applications for the microspacecraft are discussed and specific examples of proposed missions are presented. Some systems and instruments designed for the microspacecraft are described.

Jones, Ross M.↗
NASA NTRS1989

Reliability and cost considerations in launch vehicles

The inherent reliability of a space launch system, or lack thereof, is pointed out to often be a more significant determinant of access to orbit than the nominal cost. System improvements that enhance inherent reliability may accordingly represent the most economical approach to follow. At some point, the limitations of launch technologies currently in use must be acknowledged and novel methods developed. The dearth of systematic research efforts toward superior technology in launcher propulsion over the last 20 years is identified as a major limitation in the search for near-term options.

Loftus, Joseph P., Jr.↗
NASA NTRS1990

The supermodule - A design departure from the Shuttle payload paradigm

An effort has been made to formulate a novel approach to the construction of manned orbital facilities, in the context of a long-term launch strategy. The pressurized volume component of a manned platform is the point of departure, and an integrated vehicle designated the 'Supermodule' is defined which replaces analogous Space Station Freedom pressurized volume components. A launch sequence encompassing one Supermodule, one Shuttle Orbiter, and three Shuttle-Derived Vehicle cargo launchers, could reduce the number of launches needed to build a Space Station of the size of Freedom from 20 to merely five.

Murbach, Marcus S.↗
NASA NTRS1990

U.S. liquid propulsion technology stands still

NASA is currently conducting a comprehensive reevaluation of such fundamental launch vehicle-related issues as the appropriate balance between manned and unmanned launchers, reusable vs expendable vehicles and vehicle components, and the evolutionary vs innovative new-system development courses. Two trends have emerged, both emphasizing system expense: (1) low cost/manned flight vehicles for personnel transfer, small payloads, servicing, rescue, and Space Station logistics, and (2) low cost/unit mass vehicles for large and multiple payloads, propellants, bulk cargoes, and heavy upper stages. Attention is given to the contributions made by CFD to liquid-fueled engine component design.

Mccarty, John P.↗
NASA NTRS1990

Project summaries

Lunar base projects, including a reconfigurable lunar cargo launcher, a thermal and micrometeorite protection system, a versatile lifting machine with robotic capabilities, a cargo transport system, the design of a road construction system for a lunar base, and the design of a device for removing lunar dust from material surfaces, are discussed. The emphasis on the Gulf of Mexico project was on the development of a computer simulation model for predicting vessel station keeping requirements. An existing code, used in predicting station keeping requirements for oil drilling platforms operating in North Shore (Alaska) waters was used as a basis for the computer simulation. Modifications were made to the existing code. The input into the model consists of satellite altimeter readings and water velocity readings from buoys stationed in the Gulf of Mexico. The satellite data consists of altimeter readings (wave height) taken during the spring of 1989. The simulation model predicts water velocity and direction, and wind velocity.

Source record↗
NASA NTRS1989

Development of fiber-based laser anemometer for SSME application

A recent study by Rocketdyne for NASA identified laser anemometry, using a compact optical head, as a feasible diagnostic instrument for the Space Shuttle Main Engine (SSME) Model Verification experiments. Physical Research, Inc. (PRI) is presently under contract from NASA Lewis to develop and deliver such a laser anemometer system. For this application, it is desired to place the laser at a remote distance from the engine, and use single mode polarization preserving fiber optics for the transmission of the laser light to and from the measurement head. Other requirements are given. Analytical and experimental tools are being used to develop the technologies required for the laser anemometer. These include finite element analysis of the optical head and vibration tests for various optical and mechanical components. Design of the optical head and the fiber optic connectors are driven by the temperature and vibration requirements for the measurement environment. Results of the finite element analysis and the vibration tests of the components are included. Conceptual design of the fiber optic launcher and the optical probe has also been complete. Detailed design of the probe as well as the fabrication and assembly of the components is in progress.

Modarress, Dariush↗
NASA NTRS1991

An advanced hypervelocity aerophysics facility - A ground-based flight-test range

The paper discusses a concept for a ground-based flight-test facility, a large aeroballistic range capable of launching models large enough to permit the installation of significant amounts of onboard instrumentation. The large model size would also provide thick shock/boundary layers, thus providing the opportunity to measure flow-field properties via advanced offboard diagnostics. Current fabrication technology should permit the construction of a two-stage light-gas gun capable of accelerating 20 to 25 cm diameter models to velocities on the order of 6 km/sec. An electromagnetic launcher or a ram accelerator is considered as a potential means for achieving larger model sizes and/or greater launch velocities. Possible methods for obtaining and recording data are discussed as are the test chamber and model deceleration section requirements.

Witcofski, R. D.↗
NASA NTRS1991

Titan improvement study - Hydrogen core stages

The performance benefits and comparative cost-effectiveness of Titan/Centaur launcher improvement options involving a new LH2/LOX second stage and/or a new LH2/LOX first stage are presented. This incremental improvement approach involves higher confidence due to high components-commonality with well-tested systems. The proposed second stage's capabilities are such as to allow it to serve as an OTV. This improvement to Titan constitutes one of several justifications for a new 500-1000 kN thrust liquid-fuel engine.

Martin, James A.↗
NASA NTRS1990

The Energetic Transient Array ETA - A network of 'space buoys' in solar orbit for observations of gamma-ray bursts

The Energetic Transient Array (ETA) is a concept for a dedicated interplanetary network of about 40 microsatellites ('space buoys') deployed in an about 1 AU radius solar orbit for the observation of cosmic gamma ray bursts (GRBs). Such a network is essential for the determination of highly accurate (about 0.1 arcsec) error boxes for GRBs. For each of about 100 bursts which would be detectable per year of observation by such a network, high resolution spectra could be obtained through the use of passively-cooled Ge gamma-ray detectors. Stabilization of each microsatellite would be achieved by a novel technique based on the radiation pressure exerted on 'featherable' solar paddles. It should be possible to have a fully functional array of satellites in place before the end of the decade for a total cost of about $20M, exclusive of launcher fees.

Ricker, George R.↗
NASA NTRS1992

The cyclotron energization through auroral wave experiments (CENTAUR 2B)

The CENTAUR 2B mission, a dual payload program, is in many aspects the same as the previous missions from Cape Perry and Norway in 1985. It was planned that these payloads would be launched from Andoya, Norway, Nov. 1989 from the Universal II launcher. The payloads are identical, but would have been launched at different azimuths as far north and as far west as possible. Particle experiments include the angular resolving energy analyzer (AREA), the fast ion mass spectrometer (FIMS), the spectrographic particle images (SPI), and finally, the differential ion flux probe (DIFP). SwRI was responsible for the scientific payload, which includes the power supplies, the power supply interfacing, the manipulating of the data from the instruments to format it for the telemetry system, all mechanical structure and restraint mechanisms, and the payload subskin. The status of the various components of this program is given.

Winningham, J. D.↗