Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIMESTONE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

The Tunisian Jurassic aquifer in the North African Sahara aquifer system: information derived from two-dimensional seismic reflection and well logs

Southern Tunisia is an arid area where socio-economic activities are dependent on groundwater resources. The presented study aims to better characterize the Jurassic aquifer based on geological and geophysical data, with a view to develop a rational exploitation program. Well logs are used to precisely determine the position and composition of the known Jurassic aquifer layers and to identify others able to produce good quality water. The logs show that limestones, sandstones and dolomites of the Krachoua, Techout and Foum Tataouine formations are the main Jurassic aquifers. Sixty-eight seismic-reflection sections are integrated within this study. The interpolation between the interpreted sections leads to the construction of isochronous isopach maps and geoseismic sections, and their analysis finds that compressive and extensive tectonic deformations have influenced the Jurassic aquifer geometry. The Hercynian orogeny phase manifestation is remarkable in that there are several stratigraphic gaps in the Jurassic sequence. The E–W, NW–SE, and NNW–SSE accidents, reactivated in normal faults since the Permian to Lower Cretaceous epochs, have generated the structures found in the Jurassic series, such as subsided and raised blocks. Their syn-sedimentary activity has controlled the thickness and facies of these series. The Cretaceous, Tortonian and Post-Villafranchian compressions are responsible for the Jurassic-deposits folding in some localities. The highlighted tectonic and sedimentary events have an important impact on the Jurassic aquifer function by favoring the Jurassic aquifer interconnections and their connections with the Triassic and Cretaceous permeable series.

58 GEOSCIENCES↗

Initial assessment of recharge areas for large karst springs: a case study from the central Zagros Mountains, Iran

Sousan Spring emerges from the Keyno Anticline, Zagros Mountains (Iran), and the mean annual discharge is ~24 m{sup 3}/s. Geological and hydrochemical evaluations suggest that the spring recharge is from the limestone Ilam-Sarvak Formation (Cretaceous) but the Mafaroon Fault, a major thrust feature, influences the regional groundwater flow path by juxtaposing other strata. Geological, geochemical, stable isotope and water balance studies were employed to interpret this behavior. Using the isotope data, the sources and elevations of the recharge area were found. Temporal variations of the isotopic data were compared with variations of electrical conductivity (EC). Unexpectedly, high EC was associated with a relative increase of discharge and depletion of δ{sup 18}O. Several hypotheses were investigated and approximate water balance studies employed for validation. It was found that an elongated catchment on the Keyno Anticline plus a lesser catchment on a pair of parallel anticlines recharge the aquifer. While the long groundwater flow path along the Keyno Anticline plus guidance by Mafaroon Fault and the adjacent Garou shaly strata lead to increased EC in the Sousan Spring at the end of the dry season, a flow pulse from two adjoining anticlines (Mahalbakh and Shirgoon) arrives at the same time to increase the discharge and deplete the δ{sup 18}O signal. Apparently the spring did not experience true base flow conditions during the recorded hydrological year. Although the spring response to specific precipitation events was similar to typical karst aquifers, standard interpretation of recession curves and related coefficients will not be practical at Sousan.

58 GEOSCIENCES↗

Petro-mineralogical Studies of the Paleoproterozoic Phosphorites in the Sonrai basin, Lalitpur District, Uttar Pradesh, India

The Paleoproterozoic phosphorites constitute an economically significant component of the Sonrai basin of Lalitpur district. These are associated with ferruginous shale, ironstone, limestone and quartz breccia. Petro-mineralogical studies of samples of the phosphorites, using X-ray diffractometry and scanning electron microscopy, reveal that the collophane (carbonate-fluorapatite) is the dominant phosphate mineral. Calcite, dolomite, quartz, mica and haematite are the dominant gangue constituents. The phosphate minerals occur as oolites mutually replaced by carbonate and silica. The presence of iron oxides has been found in most of the thin sections. There is meagre evidence of organic matter in the form of filaments of microbial phosphate laminae in the samples of phosphorite. The mineral assemblages, their texture and various forms in these phosphorites may be due to some environmental vicissitudes followed by replacement processes and biogenic activities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characteristics of Calcium-Aluminate Slags and Pig Iron Produced from Smelting-Reduction of Low-Grade Bauxites

Low-grade bauxite ores are not favorable in the conventional Bayer process for alumina production, as they are producing more bauxite residue (red mud) and accompanying lower alumina yield than high-grade ores. In the current study, the thermodynamics and characterization of calcium-aluminate slags and pig iron produced from smelting reduction of high iron- and silica-containing bauxites are studied. Coke and limestone are used to reduce the iron oxide and adjust the basicity of slag during smelting. There is evidence that complete iron separation from bauxite is feasible through smelting-reduction process, and up to 99.9 pct of iron can be eliminated. Moreover, it is shown that the partial separation of silicon, titanium, and other elements from the Al{sub 2}O{sub 3}-containing slag occurs. The phase compositions and the distribution of elements between the metal and slag phases provide information about the high-temperature behavior of the bauxite components during smelting reduction. Employing electron microscopy analysis, it is indicated that the morphologies of CaO·Al{sub 2}O{sub 3}, 12CaO·7Al{sub 2}O{sub 3}, 2CaO·Al{sub 2}O{sub 3}·SiO{sub 2}, and CaO·Al{sub 2}O{sub 3}·SiO{sub 2} phases in the slag, as well as the complex oxides of Ca-Al-Si-Ti in the slag behave differently as the mass ratio of Al{sub 2}O{sub 3}/(Fe{sub 2}O{sub 3 }+ SiO{sub 2}) in the bauxite changes. It is also shown that the phases of slag produced from smelting-reduction below 5 K s{sup −1} of cooling rate are proper for further leaching process.

36 MATERIALS SCIENCE↗

Characterization of Manganese Oxide Precipitates from Appalachian Coal Mine Mine Drainage Treatment Systems

The removal of Mn(II) from coal mine drainage (CMD) by chemical addition/active treatment can significantly increase treatment costs. Passive treatment for Mn removal involves promotion of biological oxidative precipitation of manganese oxides (MnO{sub x}). Manganese(II) removal was studied in three passive treatment systems in western Pennsylvania that differed based on their influent Mn(II) concentrations (20-150 mg/L), system construction ({+-}inoculation with patented Mn(II)-oxidizing bacteria), and bed materials (limestone vs. sandstone). Manganese(II) removal occurred at pH values as low as 5.0 and temperatures as low as 2 C, but was enhanced at circumneutral pH and warmer temperatures. Trace metals such as Zn, Ni and Co were removed effectively, in most cases preferentially, into the MnO{sub x} precipitates. Based on synchrotron radiation X-ray diffraction and Mn K-edge extended X-ray absorption fine structure spectroscopy, the predominant Mn oxides at all sites were poorly crystalline hexagonal birnessite, triclinic birnessite and todorokite. The surface morphology of the MnOx precipitates from all sites was coarse and 'sponge-like' composed of nm-sized lathes and thin sheets. Based on scanning electron microscopy (SEM), MnO{sub x} precipitates were found in close proximity to both prokaryotic and eukaryotic organisms. The greatest removal efficiency of Mn(II) occurred at the one site with a higher pH in the bed and a higher influent total organic C (TOC) concentration (provided by an upstream wetland). Biological oxidation of Mn(II) driven by heterotrophic activity was most likely the predominant Mn removal mechanism in these systems. Influent water chemistry and Mn(II) oxidation kinetics affected the relative distribution of MnOx mineral assemblages in CMD treatment systems.

01 COAL, LIGNITE, AND PEAT↗

Material processing, microstructure, and composite properties of low carbon Engineered Cementitious Composites (ECC)

Traditional PVA fiber-reinforced Engineered Cementitious Composites (ECC) show high tensile ductility and superior durability with tight crack width, but the high cost and embodied carbon can hinder its wider application in infrastructures. The objective of this study is to develop a better understanding of the fresh and hardened properties of an ECC that employs a lower embodied-carbon binder, Limestone Calcined Clay Cement (LC3), and lower-cost PP fiber that is widely available. Specifically, the interrelations between material processing, microstructure, and composite properties were studied experimentally. The results showed that ECC with high tensile ductility up to 9% tensile strain and tight crack width with 50 μm at 2% tensile strain can be achieved. It was found that a matrix paste with higher viscosity generally enhanced fiber dispersion uniformity and robustness in tensile strain-hardening. The paste viscosity is increased when OPC is replaced by LC3 and can be tuned with superplasticizer content. Larger maximum flaw size leads to lower first crack strength, beneficial for microcrack initiation and multiple cracking. This study generates fundamental knowledge linking processing-microstructure-performance of PP-LC3-ECC. This class of low embodied carbon ECC with tight crack width is expected to contribute to reducing the carbon footprint of the built environment.

36 MATERIALS SCIENCE↗

Influence of the cementitious paste composition on the E-modulus and heat of hydration evolutions

E-modulus and heat of hydration are features of cement-based materials that follow a rapid rate of change at early ages. This paper analyses the influence of the composition of cementitious pastes on these features by using two methods: (i) a novel technique for continuously monitoring the E-modulus of cement-based materials, based on evaluating the first resonant frequency of a composite beam containing the material under testing, and (ii) an isothermal calorimeter to determine the released heat of hydration. Seventeen mixes are tested, encompassing pastes with five w/c ratios, as well as different contents of limestone filler, fly ash, silica fume and metakaolin. The results permit the comparison of the E-modulus and heat of hydration sensitivities to mix composition changes, and to check possible relations between these features. This work also helps to establish the technique (i) as a non-destructive method for monitoring the E-modulus evolution in cement-based materials since casting.

36 MATERIALS SCIENCE↗

E-modulus evolution and its relation to solids formation of pastes from commercial cements

Models for early age E-modulus evolution of cement pastes are available in the literature, but their validation is limited. This paper provides correlated measurements of early age evolution of E-modulus and hydration of pastes from five commercial cements differing in limestone content. A recently developed methodology allowed continuous monitoring of E-modulus from the time of casting. The methodology is a variant of classic resonant frequency methods, which are based on determination of the first resonant frequency of a composite beam containing the material. The hydration kinetics - and thus the rate of formation of solids - was determined using chemical shrinkage measurements. For the cements studied similar relationships between E-modulus and chemical shrinkage were observed for comparable water-to-binder ratio. For commercial cements it is suggested to model the E-modulus evolution based on the amount of binder reacted, instead of the degree of hydration.

36 MATERIALS SCIENCE↗

Observations on dedolomitization of carbonate concrete aggregates, implications for ACR and expansion

Some carbonate aggregates used in concrete are unstable in a high alkaline solution, which is present also in pore solution of cement binder. This paper investigates the process of dedolomitization of carbonate aggregate rocks and mortar bars. Selected aggregates, limestone and dolostone are of high purity without reactive silica involvement confirmed by the XRD and the XRF. For the process of dedolomitization the effect of various temperatures, solutions and time was examined. In this investigation, measurements of expansion, optical and scanning electron microscopy (SEM), energy dispersive spectrometry (EDS) and X-ray diffraction were used. Te results indicate that the process of dedolomitization occurred not only in the NaOH solution but also in the water on the mortar bar with virgin dolostone aggregate. Elevated temperature, 60 °C, increased the rate of reaction. Furthermore, the rate of reaction significantly correlates with time, which has also been confirmed through the Rietveld analysis. -- Highlights: •The dedolomitization caused no expansion. •It occurs in the dolostone aggregate without reactive silica involvement. •It has taken place already with the presence of the cement binder. •A significant alteration occurred: formation of rims, new pores and phases.

36 MATERIALS SCIENCE↗

Understanding the scabbling of concrete using microwave energy

Concrete blocks supplied by the UK Sellafield nuclear site were treated with microwave energy using a 15 kW system operating at 2.45 GHz. The effect of aggregate type (Whinstone, Gravel and Limestone); standoff distance; and effect of surface coating were studied to determine their influence on the systems performance in terms of mass and area removal rates and evaluate the controllability of the process. All blocks were scabbled successfully, with mass and area removal rates averaging 11.3 g s{sup −} {sup 1} and 3 cm s{sup −} {sup 1} respectively on treating large areas to a depth of 25 mm. The use of a Kevlar barrier between the block and applicator was found to significantly reduce the generation of dust as only 1.6% of the scabbled mass was in the < 106 μm — that generally considered to be airborne. Importantly Brazilian disc testing of the scabbled block showed that the process did not adversely affect structural properties of the test blocks after treatment.

36 MATERIALS SCIENCE↗

Fillers in cementitious materials — Experience, recent advances and future potential

The paper discusses the potential of fillers in CO{sub 2} mitigation in the cement industry. A historical overview of the use of fillers is presented as well as the limits of filler use given in cement standards. Globally, limestone filler currently represents only 7% of average worldwide cement composition. The limits of the current route to adding filler in cement by means of intergrinding are discussed. An innovative technology, that compensates binder dilution by a reduction of the water required for good rheological behavior, is presented; this allows clinker replacement rates of up to 70%. The theory that enables the design of such multimodal particle size distributions with high particle packing and low-water demand is presented, and examples of its application in concrete production are given. The efficiency in terms of CO{sub 2} mitigation is demonstrated by comparing concrete formulations designed with this innovative approach with a global benchmark of current technology. New filler minerals, as well as the effects of high-filler content on production processes and on durability are also discussed.

36 MATERIALS SCIENCE↗

Microstructural packing- and rheology-based binder selection and characterization for Ultra-high Performance Concrete (UHPC)

This paper reports strategies to design the binder phase of ultra-high performance concretes (UHPC) from commonly available cement replacement (fly ash, slag, microsilica, metakaolin) and fine filler (limestone) materials. A packing algorithm is used to extract the number density, mean centroidal distance, and coordination number of the microstructure. Similarly, rheological studies on the pastes provide yield stress, plastic viscosity, and min-slump spread. The selection criteria involves using the three microstructural and three rheological parameters individually or in combination to define packing and flow coefficients. The selection criteria is flexible enough to allow users modify the constraints depending on the application. In this study, only ternary and quaternary blends, with a total cement replacement of 30% by mass are selected for further characterization. The highly efficient microstructural packing in these mixtures and better workability that facilitated dispersion of particles to enhance the reactivity results in beneficial pore structure and mechanical properties.

36 MATERIALS SCIENCE↗

Estimating the mechanical properties of hydrating blended cementitious materials: An investigation based on micromechanics

The hydration model of Parrot & Killoh (1984) has been extended to blended cements and coupled to a micromechanical scheme similar to that of Pichler & Hellmich (2011) to estimate the Young modulus and the compressive strength of cementitious materials as a function of time. A finite aspect ratio of 7 is introduced to describe the shape of the hydrates and improve the estimate of the early age strength by the micromechanical scheme. Furthermore, accounting for the stress fluctuations in the cement paste partly explains the fact that the compressive strength of a concrete can be lower than that of its cement paste. Finally, the estimated physical properties are compared to numerous experimental measurements from the literature and new experimental measurements on blended cement pastes featuring significant weight fractions of limestone filler, fly ash or silica fume. It is shown that the present model slightly overestimates the dilution effect.

36 MATERIALS SCIENCE↗

Determination of the amount of reacted metakaolin in calcined clay blends

This paper presents a comparative study of three methods to determine the amount of reacted metakaolin in calcined clay blends: mass balance, thermodynamic modelling, and the Partial or not Known Crystalline Structure method (PONKCS) based on Rietveld analysis of X-ray diffraction. The methods are applied to Limestone calcined clay cements (LC{sup 3}-50) in this study. Mass balance and thermodynamic modelling results show good agreement, especially at early age. PONKCS method shows globally comparable results, even if it has higher variability. The precision of PONKCS becomes poor for blends with <60% of metakaolin in calcined clay.

36 MATERIALS SCIENCE↗

Changes in microstructure characteristics of cement paste on carbonation

This study investigates the influence of carbonation on the microstructure of cement paste cast with Ordinary Portland Cement (OPC), fly ash based Portland Pozzolana Cement (PPC) and Limestone Calcined Clay Cement (LC{sup 3}) using X-ray diffraction (XRD), thermal analysis (TGA), scanning electron microscope (SEM) and mercury intrusion porosimeter (MIP). A comparison is made between samples exposed to 3% carbon dioxide concentration and those exposed to natural CO{sub 2} concentrations. It is observed that the products formed on carbonation are similar in both the exposure conditions. Distinct rims corresponding to decalcified C-S-H are observed around clinker grains in the carbonated samples. Coarsening of pore structure is observed on carbonation in all the cements and an increase in the total porosity is observed in blended cements. Thermodynamic modeling indicates irrespective of the type of cement the total solid volume is reduced on complete carbonation. The volume change occurring on carbonation obtained from experimental results and thermodynamic modeling are compared.

36 MATERIALS SCIENCE↗

Unravelling chloride transport/microstructure relationships for blended-cement pastes with the mini-migration method

A chloride mini-migration method is proposed to estimate effective diffusion coefficients at the scale of the cement paste and to investigate mechanisms with complementary microstructure analyses on the same material. Blended-cement pastes with a wide range of properties were investigated in this study: systems at w/b = 0.3–0.5 including Portland cement, white Portland cement, slag-Portland cement, fly ash, glass powder, and/or limestone and calcined clay. Comparisons showed the relative and combined importance of three main parameters on the effective diffusion coefficient: the porosity, the pore connectivity parameter and the conductivity of the pore solution (low values of the latter two are generally key aspects of the high resistance of blended-cement systems against chloride ingress). Notably, a general correlation for all the investigated systems was established between the effective diffusion coefficient and the bulk conductivity (whereas no simple correlation was observed between the effective diffusion coefficient and the formation factor or the pore connectivity parameter).

36 MATERIALS SCIENCE↗

Belite cements and their activation

Belite cements, BCs, containing mainly belite, alite and calcium aluminates, are currently used as low heat cements. These binders produce high amounts of C–S–H gel and have very good durability properties which are reviewed. Additional advantages include: (i) lower limestone demand, with lower associated CO{sub 2} emissions; (ii) lower energy demand; (iii) lower kiln operating temperature, which means lowering CO{sub 2} and NO{sub x} emissions from fuel burning; and (iv) lower temperature increase at early hydration age. However, early-age strength developments are not competitive with those of Portland cements. Hence, to improve their early-age strength developments is a research priority known as activation. This enhancement can be attained by three compatible approaches: (i) chemical, (ii) physical; and (iii) admixture activations. The current research status for BCs activation is reviewed including: cost-effective element substitutions to stabilize high-temperature forms; fast cooling, milling and mild temperature hydration as physical activation; and the use of C–S–H seeds as admixture activation. After discussion of the resulting microstructures, a research outlook is exercised.

36 MATERIALS SCIENCE↗

Probing the exact form and doping preference of magnesium in ordinary Portland cement clinker phases: A study from experiments and DFT simulations

Highlights: • The doping behaviors of Mg in OPC clinker phases were systematically studied. • About 1.3 wt% MgO enter OPC clinker phases by forming substitutional solid solutions. • In the 4 composed minerals, C{sub 3}S, C{sub 3}A and C{sub 4}AF can host more Mg ions than C{sub 2}S. • Mg ions prefer to replace Ca in C{sub 3}S, C{sub 2}S and C{sub 3}A while replace Fe and Ca in C{sub 4}AF. • Both the large structure distortions and formation energies governs the low solubility. A systematic study was performed to learn the exact existence form and doping behaviors of magnesium in ordinary Portland cement (OPC) clinker. Our results show that about 1.3 wt% MgO incorporates into OPC clinker phases by forming substitutional solid solutions while excess Mg accumulate and exist as periclase. Results from Rietveld refinement present a substitution preference in C{sub 3}S and C{sub 3}A over C{sub 2}S. More in-depth analyses from density function theoretical simulations show that in C{sub 3}S, C{sub 2}S and C{sub 3}A, the substitution occurs by replacing Ca while in C{sub 4}AF, it probably occurs by substituting Fe and Ca ions. The large structure distortions and sharp increase in formation energies with increasing MgO determines its low solubility. This work provides a clear understanding of the existence states and the intrinsic mechanism governing doping behaviors of Mg, thus should be very important in guiding the synthesis of OPC clinker by utilizing high-Mg limestone.

36 MATERIALS SCIENCE↗