SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The coronary patient, as he pertains to industry particularly NASA, is discussed. Concepts of precoronary care, acute attacks which may develop while on the job, and the return of the cardiac patient to work are covered. Major emphasis was on the prevention of sudden death due to coronary disease.
An exercise program was initiated to assess the feasibility of an on the job health evaluation and enhancement program, as well as to identify the factors which influenced volunteering, adherence, and effectiveness of the program. The program was utilized by 237 of the 998 eligible Federal employees, with a mean attendance of 1.3 days per week. Those who volunteered perceived a need for increased physical activity, felt they had sufficient time to participate, and derived subjective as well as objective benefits. Significant improvements were found in heart rate response to the standard exercise test, body weight, skinfold measurements, and triglycerides. A consistent relationship was found between subjectively reported effects of the program on work, health habits, and behavior, and improvement in cardiovascular function, based on treadmill performance. Numerous personal and programmatic factors influencing volunteering and participation were identified.
Procedures for allocating hazardous pay to employees are outlined. According to the guidelines, only top level management can authorize hazardous tasks and decide if said task is indeed hazardous. The guidelines also state that hazardous jobs may be performed only if it is essential to finish a project and cannot be adequately safequarded.
The problems inherent in the design and construction of a hydrostatic azimuth thrust bearing for a tracking antenna of very large size were studied. For a load of 48,000,000 lbs., it is concluded that the hydrostatic bearing concept is feasible, provided that a particular multiple pad arrangement, high oil viscosity, and a particular load spreading arrangement are used. Presently available computer programs and techniques are deemed to be adequate for a good portion of the design job but new integrated programs will have to be developed in the area of the computation of the deflections of the supporting bearing structure. Experimental studies might also be indicated to ascertain the life characteristics of grouting under cyclic loading, and the optimization of hydraulic circuits and pipe sizes to insure the long life operation of pumps with high viscosity oil while avoiding cavitation.
An attitude computation facility for the control of unmanned satellite missions is reported. The system's major components include: the ability to transfer the attitude data from the control center to the attitude computer at a rate of 2400 bps; an attitude computation center which houses communications, closed circuit TV, graphics devices and a data evaluation area; and the use of interactive graphics devices to schedule jobs and to control program flow.
NASA's Technology Utilization Program is described, illustrating how it can be useful in achieving improved productivity, providing more jobs, solving public sector challenges, and strengthening the international competitive situation. Underlying the program is the fact that research and development conducted in NASA's aeronautics and space programs have generated much technical information concerning processes, products, or techniques which may be useful to engineers, doctors, or to others. The program is based on acquisition and publication, working with the user, and applications engineering.
The Skylab Medical Experiments Altitude Test (SMEAT) was an integral part of the Skylab Program. SMEAT served both to gather vital baseline biomedical data and to resolve many of the requirement and procedural problems which otherwise might have impaired Skylab. To all persons and organizations who worked on the SMEAT program, I would like to extend my sincere thanks. The preparation for and completion of SMEAT required individual dedication, a desire to get the job done, and a willingness to go that “second mile.” Without such outstanding performance, it would not have been possible to complete this difficult and complex test program. Everyone should be proud of the contributions which have been made to the Skylab Program.
A Langley Research Center version of NASTRAN Level 15.1.0 designed to provide the analyst with an added tool for debugging massive NASTRAN input data is described. The program checks all NASTRAN input data cards and displays on a CRT the graphic representation of the undeformed structure. In addition, the program permits the display and alteration of input data and allows reexecution without physically resubmitting the job. Core requirements on the CDC 6000 computer are approximately 77,000 octal words of central memory.
This user's manual describes the input and output variables as well as the job control language necessary to utilize the IMP-H apogee motor firing program, IMPMOT. The IMPMOT program can be executed as either a stand-alone program or as a member of the flight dynamics system. This program is used to determine the time and attitude at which to fire the IMP-H apogee boost motor. The IMPMOT program is written in FORTRAN 4 for use on the IBM 360 series computer.
The conceptual, experimental, and practical phases of developing a robot computer problem solving system are outlined. Robot intelligence, conversion of the programming language SAIL to run under the THNEX monitor, and the use of the network to run several cooperating jobs at different sites are discussed.
The author has identified the following significant results. The office for Remote Sensing of Earth Resources (ORSER) of the Space Science and Engineering Laboratory at the Pennsylvania State University has developed an extensive operational system for processing and analyzing ERTS-1 and similar multispectral data. The ORSER system was developed for use by a wide variety of researchers working in remote sensing. Both photointerpretive techniques and automatic computer processing methods have been developed and used, separately and in a combined approach. A remote Job Entry system permits use of an IBM 370/168 computer from any compatible remote terminal, including equipment tied in by long distance telephone connections. An elementary cost analysis has been prepared for the processing of ERTS data.
The overall communications and data flow between the ERTS spacecraft and the ground stations and processing centers are generally described. Data from the multispectral scanner and the return beam vidicon are telemetered to a primary ground station where they are demodulated, processed, and recorded. The tapes are then transferred to the NASA Data Processing Facility (NDPF) at Goddard. Housekeeping data are relayed from the prime ground stations to the Operations Control Center at Goddard. Tracking data are processed at the ground stations, and the calculated parameters are transmitted by teletype to the orbit determination group at Goddard. The ERTS orbit has been designed so that the same swaths of the ground coverage pattern viewed during one 18-day coverage cycle are repeated by the swaths viewed on all subsequent cycles. The Operations Control Center is the focal point for all communications with the spacecraft. NDPF is a job-oriented facility which processes and stores all sensor data, and which disseminates large quantities of these data to users in the form of films, computer-compatible tapes, and data collection system data.
Utilizing the extract verb of GIM causes the requested information to be extracted from the GIM base and written on to tape. When the GIM extract has completed, a FORTRAN program is then compiled and executed. This program reads the tape generated by GIM, formats and prints the extracted data on the line printer. When an end of file on the extracted tape is encountered the job is terminated.
The development of a course of study is briefly examined from two points of view. The first represents the background that would seem to be needed for a fledgling engineer upon his entry into the engineering profession and would allow him to complete successfully his on-the-job training, or engineering internship as it were. The second represents that which must be provided on the basis of the students background from secondary school. It is suggested that a course of study viewed in this way is never fixed, but rather evolves continuously. A particular evolving course of study is briefly discussed.
The Office for Remote Sensing of Earth Resources (ORSER) of the Space Science and Engineering Laboratory (SSEL) at the Pennsylvania State University has developed an extensive operational system for processing and analyzing ERTS-1 and similar multispectral data. The ORSER system was developed for use by a wide variety of researchers working in remote sensing. Both photointerpretive techniques and automatic computer processing methods have been developed and used, separately and in a combined approach. A Remote Job Entry (RJE) system permits use of an IBM 370/168 computer from any compatible remote terminal, including equipment tied in by long-distance telephone connections. An elementary cost analysis has been prepared for the processing of ERTS data.
Successful aerial photography depends on aerial cameras providing acceptable photographs within cost restrictions of the job. For topographic mapping where ultimate accuracy is required only large format mapping cameras will suffice. For mapping environmental patterns of vegetation, soils, or water pollution, 9-inch cameras often exceed accuracy and cost requirements, and small formats may be better. In choosing the best camera for environmental mapping, relative capabilities and costs must be understood. This study compares resolution, photo interpretation potential, metric accuracy, and cost of 9-inch, 70mm, and 35mm cameras for obtaining simultaneous color and color infrared photography for environmental mapping purposes.
Applying the same LANDSAT-1 data to three substantially different image processing systems, a snow mapping task was performed. LARSYS Ver.3, STANSORT-2, and General Electric Image-100 did all the jobs of detecting the snowline in forested mountainous terrain, and to determine the snowcovered area. While the control and accuracy achieved with LARSYS is remarkable, time and effort to perform the processing favor the systems STANSORT and Image-100. The experiences and results demonstrate the need for a fast interactive system for operational snowmapping with multispectral satellite data.
The ERIPS is an interactive computer system used in the analysis of remotely sensed data. It consists of a set of software programs which are executed on an IBM System/360 Model 75J computer under the direction of a trained analyst. The software was a derivative of the Purdue LARSYS program and has evolved to include an extensive pattern recognition system and a number of manipulative, preprocessing routines which prepare the imagery for the pattern recognition application. The original purpose of the system was to analyze remotely sensed data, to develop and perfect techniques to process the data, and to determine the feasibility of applying the data to significant earth resources problems. The System developed into a production system. Error recovery and multi-jobbing capabilities were added to the system.