Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Internet network”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Digital Earth Initiative: A Joint Interagency Program

The Digital Earth is a virtual representation of our planet that enables a person to explore and interact with the vast amounts of natural and cultural information gathered about the Earth. The Digital Earth comprises data interfaces and standards enabling access to geo-referenced data from remote sensing, cartographic, demographic, medical, and other sources to respond to questions posed by the user. In a recent address at the California Science Center in Los Angeles, Vice President Al Gore articulated a Digital Earth Vision. That vision spoke to developing a multi-resolution, three-dimensional representation of the planet, into which we can roam and zoom into vast quantities of embedded geo-referenced data. The vision was not limited to moving through space but also allowing travel over a time-line, which can be set for days, years, centuries, or even geological epochs. As prototypes become available, it would also be possible to interact with the Digital Earth in multiple places around the country with access to high-speed networks and at a more limited level of access over the Internet. NASA was asked by the Vice President to lead an interagency initiative that would take steps to bring this vision to the public. This talk describes the start-up and plans of the Digital Earth Interagency Working Group in the formulation of its charter, an architecture reference model for Digital Earth, public/private partnerships, cooperative agreement notices, Digital Earth prototypes, and testbeds. Animations employing technologies for virtual roaming and zooming through multi-resolution satellite data set as prototype systems will be presented along with examples of potential user scenarios. Plans for engaging academia and industry in implementing the Digital Earth initiative will be discussed.

Halem, Milton↗

Benefits of Delay Tolerant Networking for Earth Science Missions

To date there has been much discussion about the value of Delay Tolerant Networking (DTN) for space missions. Claims of various benefits, based on paper analysis, are good; however a benefits statement with empirical evidence to support is even better. This paper presents potential and actual advantages of using DTN for Earth science missions based on results from multiple demonstrations, conducted by the Communications, Standards, and Technology Laboratory (CSTL) at NASA Goddard Space Flight Center (GSFC). Demonstrations included two flight demonstrations using the Earth Observing Mission 1 (EO-1) and the Near Earth Network (NEN), a ground based demonstration over satellite links to the Internet Router in Space (IRIS) payload on Intelsat-14, and others using the NASA Tracking Data Relay Satellite System (TDRSS). Real and potential findings include increased flexibility and efficiency in science campaigns, reduced latency in a collaborative science scenario, and improved scientist-instrument communication and control.

Davis, Faith↗

High-Rate Delay Tolerant Networking (HDTN) Software Requirements Analysis

This document serves as a detailed analysis of the main networking protocols implemented by HDTN. Sources of the protocol specifications include Internet Engineering Task Force (IETF) Request for Comments (RFC) and Consultative Committee for Space Data Systems (CCSDS) standards. The focus of this report is to derive software requirements suitable for NASA Procedural Requirements 7150.2D Class B compliance, including requirements traceability and software verification and validation, from the source specifications. This analysis will be incorporated into the finalized HDTN Software Requirements Specification (SRS) but does not encompass the full scope of the HDTN SRS. Requirements in this document are considered draft. The complete requirements will include bundle application requirements, interface requirements, computer resource requirements, software quality factors, and additional requirements as determined by the project. This document is publicly released to the greater community to receive feedback and foster collaboration opportunities.

Rachel Dudukovich↗

Scalable Asset Discovery, Vulnerability Scanning, and Penetration Testing for Remote Sites and Wireless Spectrums Utilizing an Embedded Linux Plug - PwniPlug and the Raspberry Pi B+ as a Sample Pen Test

All devices attached to the NASA KSC network are subject to security vulnerability scanning and/or penetration testing. In today's changing environment, vulnerable and/or unprotected systems can easily be overlooked. Systems that are not properly managed can become a potential threat to the operational integrity of our systems and networks. This includes all NASA (internal and external) information systems within NASA KSC Internet Protocol (IP) address space, and NASA KSC facilities. The Office of the Chief Information Officer (OCIO) recommends that all NASA Centers and information systems be subject to penetration testing on a regular interval in accordance with the guidelines identified by the National Institute of Standards and Technology (NIST). (ITS-HBK-2810.04-02A) Protecting information and equipment at NASA is an area of increasing concern. In addition to the CPU's on the network; Supervisory, Control and Data Acquisition (SCADA) systems are especially vulnerable because these systems have lacked standards, use embedded controllers with little computational power and informal software, are connected to physical processes, have few operators, and are increasingly also being connected to corporate networks. The scope of work is comprised of several individual components which together build upon previous work by Drew Branch, NASA KSC Intern. The Pwn Plug is the selected COTS (Commercial-Off-The-Shelf) device chosen to test simplification of mandatory IT Security tasks. The device will be utilized to provide services to NASA KSC and enable an assessment of infrastructure soundness and regulatory compliance in an efficient, economical, and business responsive manner. The Pwn Plug is designed as a pen testing appliance which provides a hardware platform that can support commercial penetration testing efforts at significantly reduced costs. The expected outcomes are: 1) External Penetration Testing, 2) Social Engineering, 3) Procedural Documentation, 4) Recommended Remediation Action Plan, 5) System Retest & Remediation Attestation and 6) Final Reports, out briefing and Presentation. Due to physical and material constraints beyond intern and mentor control, the project was redefined as a working pen-test scenario. Limitations of lab availability and tools dictated an academic exercise. This report was developed within the scenario guidelines suggested by the project mentor. The guidelines were to be creative in developing a Pen Test program for a client.

Penetration Testing↗

A History of the Improvement of Internet Protocols Over Satellites Using ACTS

This paper outlines the main results of a number of ACTS experiments on the efficacy of using standard Internet protocols over long-delay satellite channels. These experiments have been jointly conducted by NASAs Glenn Research Center and Ohio University over the last six years. The focus of our investigations has been the impact of long-delay networks with non-zero bit-error rates on the performance of the suite of Internet protocols. In particular, we have focused on the most widely used transport protocol, the Transmission Control Protocol (TCP), as well as several application layer protocols. This paper presents our main results, as well as references to more verbose discussions of our experiments.

Allman, Mark↗

SCaN Transportable Communication Platform (STCP)

NASA Glenn Research Center required a satellite communication trailer that served dual purposes; 24/7 Emergency Communication Services (ECS) in the event of a natural or manmade disaster that disrupted conventional communications, and a Ka Band NASA TDRS capability providing a research capability for over the air evaluations/characterizations. The trailer was to be field deployable, environmentally controlled and self-contained providing local area networks (LANs) and Wide Area Networks (WAN's) with user access both wired (Ethernet) and wireless (802.11) supporting VoIP, Internet Web access and Email. The TDRSS terminal included a 200W TWT amplifier mounted on the feed boom, individual up and down converters, and custom integrated waveguide and a supporting feed system. Other features such as a mast, generator, electrical, lighting, surveillance, and storage capabilities were also required. The Trailer was developed and demonstrated these original requested capabilities. New Requirements are defined and the trailer is now being evolved and upgraded to be a backup for the Near- Earth Network (NEN) Stations at KSC that will support the launch phase of EM-1. This paper presents the current and future capabilities of the trailer and additional options that will make it a valuable deployable asset to support remote operations from any launch from location.

Ka Band↗

Video That's Out of This World: A Snapshot of Video Distribution from Across the Solar System

While extraterrestrial scientific research advances to the Moon and Mars, so does the need for secure high-quality video links to capture data and share the experience. This paper describes the space to ground architecture needed to satisfy the cultural mantra challenging “Pictures or it didn’t happen!” as NASA travels beyond Low Earth Orbit. The Marshall Space Flight Center’s Delay Tolerant Network Marshall Enterprise (DTNME) protocol is the framework for video distribution beyond the terrestrial Internet, appropriate for communications across the solar system. Utilizing the International Space Station (ISS) as a test facility, NASA engineers and contractors will demonstrate new technologies and capabilities to transmit high-quality video imagery for NASA’s return to the Moon, Mars exploration, and next generation of explorers.

Photography↗

Defining Tolerance: Impacts of Delay and Disruption when Managing Challenged Networks

Challenged networks exhibit irregularities in their communication performance stemming from node mobility, power constraints, and impacts from the operating environment. These irregularities manifest as high signal propagation delay and frequent link disruption. Understanding those limits of link disruption and propagation delay beyond which core networking features fail is an ongoing area of research. Various wireless networking communities propose tools and techniques that address these phenomena. Emerging standardization activities within the Internet Research Task Force (IRTF) and the Consultative Committee for Space Data Systems (CCSDS) look to build upon both this experience and scalability analysis. Successful research in this area is predicated upon identifying enablers for common communication functions (notably node discovery, duplex communication, state caching, and link negotiation) and how increased disruptions and delays affect their feasibility within the network. Networks that make fewer assumptions relating to these enablers provide more universal service. Specifically, reliance on node discovery and link negotiation results in network-specific operational concepts rather than scalable technical solutions. Fundamental to this debate are the definitions, assumptions, operational concepts, and anticipated scaling of these networks. This paper presents the commonalities and differences between delay and disruption tolerance, including support protocols and critical enablers. We present where and how these tolerances differ. We propose a set of use cases that must be accommodated by any standardized delay-tolerant network and discuss the implication of these on existing tool development.

mobility drivers↗

Video That's Out of This World: A Snapshot of Video Distribution from Across the Solar System

While extraterrestrial scientific research advances to the Moon and Mars, so does the need for secure high-quality video links to capture data and share the experience. This paper describes the space to ground architecture needed to satisfy the cultural mantra challenging “Pictures or it didn’t happen!” as NASA travels beyond Low Earth Orbit. The Marshall Space Flight Center’s Delay Tolerant Network Marshall Enterprise (DTNME) protocol is the framework for video distribution beyond the terrestrial Internet, appropriate for communications across the solar system. Utilizing the International Space Station (ISS) as a test facility, NASA engineers and contractors will demonstrate new technologies and capabilities to transmit high-quality video imagery for NASA’s return to the Moon, Mars exploration, and next generation of explorers.

Photography↗

Video That's Out of This World: A Snapshot of Video Distribution from Across the Solar System

While extraterrestrial scientific research advances to the Moon and Mars, so does the need for secure high-quality video links to capture data and share the experience. This paper describes the space to ground architecture needed to satisfy the cultural mantra challenging “Pictures or it didn’t happen!” as NASA travels beyond Low Earth Orbit. The Marshall Space Flight Center’s Delay Tolerant Network Marshall Enterprise (DTNME) protocol is the framework for video distribution beyond the terrestrial Internet, appropriate for communications across the solar system. Utilizing the International Space Station (ISS) as a test facility, NASA engineers and contractors will demonstrate new technologies and capabilities to transmit high-quality video imagery for NASA’s return to the Moon, Mars exploration, and next generation of explorers.

Photography↗

Duplex Direct Data Distribution System

The NASA Glenn Research Center (GRC) is developing and demonstrating communications and network technologies that are helping to enable the near-Earth space Internet. GRC envisions several service categories. The first of these categories is direct data distribution or D3 (pronounced "D-cubed"). Commercially provided D3 will make it possible to download a data set from a spacecraft, like the International Space Station. as easily as one can extract a file from a remote server today, using a file transfer protocol. In a second category, NASA spacecraft will make use of commercial satellite communication (SATCOM) systems. Some of those services will come from purchasing time on unused transponders that cover landmasses. While it is likely there will be gaps in service coverage, Internet services should be available using these systems. This report addresses alternative methods of implementing a full duplex enhancement of the GRC developed experimental Ka-Band Direct Data Distribution (D3) space-to-ground communication link. The resulting duplex version is called the Duplex Direct Data Distribution (D4) system. The D4 system is intended to provide high-data-rate commercial direct or internet-based communications service between the NASA spacecraft in low earth orbit (LEO) and the respective principal investigators associated with these spacecraft. Candidate commercial services were assessed regarding their near-term potential to meet NASA requirements. Candidates included Ka-band and V-band geostationary orbit and non-geostationary orbit satellite relay services and direct downlink ("LEO teleport") services. End-to-end systems concepts were examined and characterized in terms of alternative link layer architectures. Alternatives included a Direct Link, a Relay Link, a Hybrid Link, and a Dual Mode Link. The direct link assessment examined sample ground terminal placements and antenna angle issues. The SATCOM-based alternatives examined existing or proposed commercial SATCOM services that could be available in the 2005 time frame. The alternatives were evaluated and compared in terms of average daily system throughput and cost per bit. Throughput was estimated based on hypothetical scenarios supporting the International Space Station and polar orbiting missions. The feasibility of using standard TCP and a modified TCP was evaluated and risks were identified. An estimate of the TCP acknowledgment data rate required to support a return channel rate of 622 Mbps was developed using OPNET.

Greenfield, Israel↗

The Next Generation of Space Telemetry and Telecommand Standards

New standards for space/ground communications protocols are suggested for the following areas: a) file transfer based on the Internet, b) transport based on the Internet TCP/UDP, c) security derived from the ISO NLSP, a new space network, and a new space data link.

spacecraft communications telemetry standards tele↗

Characterization Study of TestBed Infrastructure Performance in a Distributed Simulation Environment: Baseline Analysis

Characterization of the performance of Air Traffic Management Exploration (ATM-X) TestBed integration environment has been investigated and documented for one system configuration for progressively increasing traffic. Several statistical parameters were used to assess the performance of the TestBed distributed system such as mean, standard deviation, skewness, and kurtosis of latency, and update rate for aircraft state messages that are transmitted through the simulated system under investigation. It is necessary to assess the performance characteristics of distributed systems in terms of the indicated statistical parameters mentioned above. It is critical to verify the system performance with respect to a researcher’s required system performance. Computer host specifications are documented in terms of Central Processing Unit (CPU) clock speed and core count. Transmission Control Protocol/ Internet Protocol (TCP/IP) message protocol was used for data transmission. The system network topology also contributes to the latency and update rate variations from the one imposed by the data source. The motivation for selecting the TestBed infrastructure as the focus of this study can be attributed to the number of services and capabilities it provides that help simplify the process of preparing and conducting a simulation. These capabilities include an easy to use GUI for simulation configuration, access to TestBed library by the end-user of other simulation software components, a modular adapter paradigm that allows simple connectivity of external software to TestBed, connectivity with other simulation laboratories, and a Software Development Kit (SDK) for quicker development. Two types of traffic generators, Air Traffic Generator (ATG) and Multi Aircraft Control System (MACS) were used to generate messages that were injected into the TestBed distributed environment. Eight different air traffic scenarios with progressively increasing loads were generated for each air traffic simulator. The corresponding air traffic loads between the two simulators had an identical number of aircraft per scenario, but different flight plans. It was observed that the performance of MACS degraded for air traffic scenarios containing more than 200 aircraft (37.5 KB/s nominal throughput). However, ATG performed adequately under all tested air traffic loads up to 1200 aircraft (225. KB/s nominal throughput). The tests show that MACS exhibits better latency performance with smaller aircraft loads when compared to ATG. The tests also show that the TestBed infrastructure successfully transmits 1200 aircraft without significant degradation of its performance. From the latency trends for both MACS and ATG, it is clear that as aircraft load increases, the latency in the system increases as well as its standard deviation. Likewise, the trends for the update data rate for both MACS and ATG show that as the aircraft load increases, so does the standard deviation and mean of the update rates which can be attributed to the performance of MACS and ATG applications. The analysis of the results of this study have proven that the overall system performance is dependent on the individual performance of each system component that is connected to TestBed, which subsequently propagates into the system. All TestBed characterization tests were conducted in SimLabs at NASA Ames Research Center in November 2019. This study addresses the need for a baseline TestBed characterization, and the results will serve as a reference for more complex simulation systems.

Air Traffic Management simulations↗

Secure Networks for First Responders and Special Forces

When NASA needed help better securing its communications with orbiting satellites, the Agency called on Western DataCom Co., Inc., to help develop a prototype Internet Protocol (IP) router. Westlake, Ohio-based Western DataCom designs, develops, and manufactures hardware that secures voice, video, and data transmissions over any IP-based network. The technology that it jointly developed with NASA is now serving as a communications solution in military and first-response situations.

Source record↗

Wireless Integrated Microelectronic Vacuum Sensor System

NASA Stennis Space Center's (SSC's) large rocket engine test facility requires the use of liquid propellants, including the use of cryogenic fluids like liquid hydrogen as fuel, and liquid oxygen as an oxidizer (gases which have been liquefied at very low temperatures). These fluids require special handling, storage, and transfer technology. The biggest problem associated with transferring cryogenic liquids is product loss due to heat transfer. Vacuum jacketed piping is specifically designed to maintain high thermal efficiency so that cryogenic liquids can be transferred with minimal heat transfer. A vacuum jacketed pipe is essentially two pipes in one. There is an inner carrier pipe, in which the cryogenic liquid is actually transferred, and an outer jacket pipe that supports and seals the vacuum insulation, forming the "vacuum jacket." The integrity of the vacuum jacketed transmission lines that transfer the cryogenic fluid from delivery barges to the test stand must be maintained prior to and during engine testing. To monitor the vacuum in these vacuum jacketed transmission lines, vacuum gauge readings are used. At SSC, vacuum gauge measurements are done on a manual rotation basis with two technicians, each using a handheld instrument. Manual collection of vacuum data is labor intensive and uses valuable personnel time. Additionally, there are times when personnel cannot collect the data in a timely fashion (i.e., when a leak is detected, measurements must be taken more often). Additionally, distribution of this data to all interested parties can be cumbersome. To simplify the vacuum-gauge data collection process, automate the data collection, and decrease the labor costs associated with acquiring these measurements, an automated system that monitors the existing gauges was developed by Invocon, Inc. For this project, Invocon developed a Wireless Integrated Microelectronic Vacuum Sensor System (WIMVSS) that provides the ability to gather vacuum-gauge measurements automatically and wirelessly, in near-real time - using a low-maintenance, lowpower sensor mesh network. The WIMVSS operates by using a self-configuring mesh network of wireless sensor units. Mesh networking is a type of networking where each sensor or node can capture and disseminate its own data, but also serve as a relay to receive and transmit data from other sensors. Each sensor node can synchronize with adjacent sensors, and propagate data from one sensor to the next, until the destination is reached. In this case, the destination is a Network Interface Unit (NIU). The WIMVSS sensors are mounted on the existing vacuum gauges. Information gathered by the sensors is sent to the NIU. Because of the mesh networking, if a sensor cannot directly send the data to the NIU, it can be propagated through the network of sensors. The NIU requires antenna access to the sensor units, AC power, and an Ethernet connection. The NIU bridges the sensor network to a WIMVSS server via an Ethernet connection. The server is configured with a database, a Web server, and proprietary interface software that makes it possible for the vacuum measurements from vacuum jacketed fluid lines to be saved, retrieved, and then displayed from any Web-enabled PC that has access to the Internet. Authorized users can then simply access the data from any PC with Internet connection. Commands can also be sent directly from the Web interface for control and maintenance of the sensor network. The technology enabled by the WIMVSS decreases labor required for gathering vacuum measurements, increases access to vacuum data by making it available on any computer with access to the Internet, increases the frequency with which data points can be acquired for evaluating the system, and decreases the recurring cost of the sensors by using off-the-shelf components and integrating these with heritage vacuum gauges.

Krug, Eric↗

Multi-Domain Routing in Delay Tolerant Networks

The goal of Delay Tolerant Networking (DTN) is to provide the missing ingredient for the ever-growing collection of communicating nodes in our solar system to become a Solar System Internet (SSI). Great strides have been made in modeling particular types of DTNs, such as schedule- or discovery-based. Now, analogously to the Internet, these smaller DTNs can be considered routing domains which must be stitched together to form the overall SSI. In this paper, we propose a framework for cross-domain routing in DTNs as well as methodologies for detecting these sub-domains. Example time-varying networks are given to demonstrate the techniques proposed. A basic component is the mathematical theory of sheaves, which unifies the underlying model of DTN routing algorithms, by giving rise to routing sheaves – these can be defined for the dynamic and scheduled networks as noted above, and can also be used to define the interfaces between these domains in order to route across them. An immediate application would be routing across discovery-based networks connected by scheduled networks. These DTN subdomains remain elusive, however, and need to become well-defined and properly sized for tractable computability. In particular, a balance must be determined between areas that are too large (i.e. large matrix computations) versus areas that are too small (i.e. “many” single-noded domains). Moreover, the connections between the domains should, at least locally, be chosen to optimize data flow and connectivity: we address this in three ways. First, tools from persistent homology are given to understand underlying structures, reminiscent of hierarchies in the Internet Protocol (IP) addressing. Second, we construct a notion of temporal graph curvature based on network geometry to analyze flows induced by dynamical processes on these networks. Finally, Schrodinger Bridges, a tool arising from statistical physics, are proposed as a method of constructing flows on time-evolving networks with desirable properties such as speed, robustness, and load sensitivity. We construct an approach to temporal hypergraphs to simultaneously model unicast, multicast, and broadcast, using the language of scheme theory, and then consider DTN network coding as a way to achieve network-level computation and organization. The paper concludes with a discussion and ideas for future work.

Alan Hylton↗

User support services and network application development: An overview

An overview is given of the user support services and network application development. The overview consists of the background, elements of NASA Science Internet (NSI) with GSFC responsibility, GSFC element objectives, and a summary of current status and plans. A conclusion of the overview is that refinement to the objectives and plans of the NSI elements under GSFC responsibility is ongoing and will continue to be influenced by user input/feedback through meetings with NSIUWG and user discipline programs, etc.

Gary, J. Patrick↗